|
|
|
![]() |
|
Strumenti |
![]() |
#1 |
Junior Member
Iscritto dal: Aug 2005
Messaggi: 9
|
Someone please help me...
I have a DSL 302T modem which was giving me trouble (Getting disconnected very frequently) so I updated it with 300T firmware but the same problem. I learned a lot from the Italian forums using Systran (I don't speak or understand Italian...sorry) I then update it to 500T with the GT701-WG-Recovery tool. I then wanted to experiment so I update it to 502T then tried something else but in the end by modem died. It will not connet to the ethernet...only the power led is on.
Anyway I bought a brand new DSL 302T modem and updated it with the latest Russian Firmware for 300T. Then I wanted to change it to 502 T or 500T but I couldn't do it. My modem is dead now but it connect to the ethernet port and I can communicate with it through Telnet but it won't start. I have tried everything that I know but it wouldn't start. Maybe the new modem is protected because the flash will not erase. The IP of the Modem for some reason is 10.8.8.10 and not 10.8.8.8. or 192.168.0.1 etc I have gone again into the forums and found a tool called CICLaMaB. The version 1.9.96 works for me but the version 2.0.1 does not...maybe because of the modem IP 10.8.8.10 With the version 1.9.96 I get the following. CICLaMaB ver. 1.9.96 modem/router info: bootloaderVersion 0.22.02 flashsize 0x00200000 usb_prod N/A mtd0 0x900a0000,0x901f0000 mtd1 0x90010000,0x900a0000 mtd2 0x90000000,0x90010000 mtd3 0x901f0000,0x90200000 RETR env 226 Transfer complete. RETR env 226 Transfer complete. Parametri impostati: - Autoload on - Partizionamento mtd0 e mtd1 per D-Link DSL-300/2T --------------------------------------------------------------- SETENV autoload,1 200 SETENV command successful SETENV mtd0,0x900a0000,0x901f0000 200 SETENV command successful SETENV mtd1,0x90010000,0x900a0000 200 SETENV command successful SETENV mtd3,0x901f0000,0x90200000 200 SETENV command successful TYPE I 200 Type set to I. PASV 227 Entering Passive Mode (192,168,1,1,189,153). RETR config.xml 150 Opening BINARY mode data connection for file transfer. 226 Transfer complete. TYPE I 200 Type set to I. PASV 227 Entering Passive Mode (192,168,1,1,189,153). RETR env 150 Opening BINARY mode data connection for file transfer. 226 Transfer complete. MEDIA FLSH 200 Media set to FLSH. TYPE I 200 Type set to I. PASV 227 Entering Passive Mode (192,168,1,1,189,153). STOR filesystem mtd0 Cancellazione partizione mtd0. Attendere... 550 Flash erase failed. Il comando è fallito: STOR filesystem mtd0 TYPE I 200 Type set to I. PASV 227 Entering Passive Mode (192,168,1,1,189,153). STOR kernel mtd1 Cancellazione partizione mtd1. Attendere... I just don't know what to do...maybe if I could change the IP address of the modem from 10.8.8.10 to either 192.168.0.1 or 10.8.8.8 will make things work. I don't know much about Linux...only a windows XP user. I have all the firmwares including the recovery tools. Please if anyone can help me then I will be very thankful. Thanks in advance. |
![]() |
![]() |
![]() |
Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 21:40.