|
|
|
![]() |
|
Strumenti |
![]() |
#1 |
Junior Member
Iscritto dal: Dec 2007
Messaggi: 8
|
INSTALLARE DISTRO SU controller SATA PCI Cardbus adapter
Ciao a tutti,
sono appena registrato. ho fatto una ricerca su FAQ HOWTO ed ho trovato segnalazione che l'installazione di linux su controller raid ide o sata potrebbe essere più problematico. Configurazione: PIII 450 MHz 458 Mb (più o meno) RAM CONTROLLER SATA HAMLET COSI' DESCRITTO: -------------------------------------------------------------------------- This SATA PCI card is compliant with Serial-ATA 1.0 specifications, to upgrade your desktop computer for dual Serial ATA RAID Channels (one internal and one external) and one fully Parallel-ATA Host controller for supporting single channel. The PCI card provides up to 33/66 MHz ,fully compliant Serial ATA ports on the device side to access Serial ATA hard disk drive. Striping (RAID 0) and Mirroring (RAID 1) improve the data performance and provide the data redundancy. Specification Dual Port Serial ATA Interface Transfer rate up to 1.5GB/s Sata PCI card Serial-ATA 1.0 specification System requirements Windows 98SE/2000/ME/XP Features Serial-ATA Interface 1.5 Gb/s data rate Supports SATA 1.0 (High Speed Serialized AT Attachment, Revision1.0) Completely SW transparent with Parallel ATA Supports Host adapter register interface(SCR, Status and Control Registers) Parallel-ATA Interface Supports Ultra DMA Mode Transfers up to Mode 6 Timing (133 Mbts) Supports 48-bit LBA (Large Disk), hard driver larger than 137GB Supports PIO Modes up to Mode 4 Timings,and Multiword DMA Mode 0,1,2 with Independent Timing of up to 4 drives Supports Tri-state IDE Signals PCI Bus Interface Compliant with PCI specification revision 2.2 Supports up to 33/66 MHz PCI interface clock --------------------------------------------------------------------- 1 HD 6 GB UDMA4 (ERA IL DISCO ORIGINALE E L'HO TENUTO COME ARCHIVIO) 1 HD 160 GB SATA (HA SOPRA WIN2K ED E' IL DISCO DI BOOT) UNICA PARTIZIONE NTFS STANTE CHE MI LEGGERO' LE VARIE GUIDE SUGGERITE, HO GIA' PROVATO AD INSTALLARE UBUNTU/KUBUNTU OTTENENDO IN AVVIO IL BOOT LOADER CHE MI INDICA 2 POSSIBILI SO (LINUX E WIN2K) CHE PERO' RESTITUISCE I SEGUENTI 2 ERRORI: ERROR 22: NO SUCH PARTITION PER LINUX ERROR 25: DISK READ ERROR PER WIN2K ORA DOPO DIVERSE ORE DI RICERCHE SU COMANDI VARI HO RIPRISTINATO (ALMENO CREDO) IL MBR DI WIN ED ELIMINATO OGNI PARTIZIONE. MA SONO SERIAMENTE INTENZIONATO AD USARE LINUX ED E' PER QUESTO CHE GRADIREI SEMPLICI CHIARIMENTI SUL COME AFFRONTARE L'INSTALLAZIONE STANTE LA CONFIGURAZIONE HW CHE VI HO DESCRITTO (MI E' PARSO DI CAPIRE CHE ALCUNI PROBLEMI POTREBBERO ESSERE DATI DAL MANCATO RICONOSCIMENTO DEL CONTROLLER COSI' COME DA MIO ERRORE NELLA FASE DI INSTALLAZIONE DEL DISCO/PARTIZIONE SUL QUALE INSTALLARE IL GRUB. GRAZIE A TUTTI E SCUSATE PER L'INIZIALE DILUNGAMENTO |
![]() |
![]() |
![]() |
#2 |
Senior Member
Iscritto dal: Sep 2005
Città: Genoa
Messaggi: 717
|
Io per prima cosa proverei con una live del SO che vuoi installare, così intanto vediamo se hai altri problemi, se si avvia apri un terminale e digiti
Codice:
sudo fdisk -l |
![]() |
![]() |
![]() |
#3 |
Junior Member
Iscritto dal: Dec 2007
Messaggi: 8
|
Live SO provate e apparentemente funzionanti:
UNBUNTU 7.04 (il file manager nautilus mi vede i dischi e riesco ad aprire i file ivi contenuti) KUBUNTU 7.04 (il file manager Konqueror li vede ma restituisce errore "hal-storage-fixed-mount-all-options refused uid 999") GOS (non ho verificato) di seguito l'esito del comando che mi hai suggerito in unbuntu 7.04 live ------------------------------------------------------------------------- Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 19457 156288321 7 HPFS/NTFS Disk /dev/hdg: 6448 MB, 6448619520 bytes 15 heads, 63 sectors/track, 13328 cylinders Units = cylinders of 945 * 512 = 483840 bytes Device Boot Start End Blocks Id System /dev/hdg1 1 13328 6297448+ b W95 FAT32 Partition 1 does not end on cylinder boundary. /dev/hdg2 * 1 1 0 10 OPUS Partition 2 does not end on cylinder boundary. Partition table entries are not in disk order ------------------------------------------------------------------------- di seguito l'esito del comando che mi hai suggerito in kunbuntu 7.04 live ------------------------------------------------------------------------- Disk /dev/hdg: 6448 MB, 6448619520 bytes 15 heads, 63 sectors/track, 13328 cylinders Units = cylinders of 945 * 512 = 483840 bytes Device Boot Start End Blocks Id System /dev/hdg1 1 13328 6297448+ b W95 FAT32 Partition 1 does not end on cylinder boundary. /dev/hdg2 * 1 1 0 10 OPUS Partition 2 does not end on cylinder boundary. Partition table entries are not in disk order Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 19457 156288321 7 HPFS/NTFS ------------------------------------------------------------------------- per il disco hdg so già che c'è qualche problema di partizione ed immagino che quando ho fatto la prima installazione (ed ancora più ignorante di adesso) non ho verificato cosa volesse dire che avrebbe installato il grub su hd0. poco male il disco per ora è accessibile. ho intenzione di farne un back-up e formattarlo. grazie ancora |
![]() |
![]() |
![]() |
Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 14:31.