WD TV HD Media Player

[cionci]

Oggi è mancata corrente, quando è tornata ha inizato a lampeggiare il led d'accensione velocemente ... anche se lo scollego e ricollego non cambia... cosa è successo!??
Prova a scollegare tutto quello che hai attaccato al WDTV, tienilo almeno un minuto senza corrente e riprova.

[moba77]

Prova a scollegare tutto quello che hai attaccato al WDTV, tienilo almeno un minuto senza corrente e riprova.


... niente ! l'ho scollegato x più di dieci minuti , l'ho anche resettato col pulsantino laterale ma il led lampeggia sempre !!!

sono disperato !!! ma come cavolo è possibile che s'è fritto così???

[cionci]

Per resettarlo devi farlo da acceso.

[moba77]

Per resettarlo devi farlo da acceso.

l'ho fatto da acceso , ma il led lampeggia sempre

[Sikillo]

Però ogni volta che riaccendo l'HD il WD ci mette un buon 40 sec. a trovare i files (non sono pochi ma non è certo pieno).
Mi confermate che con il nuovo ufficiale 1.02.07 questo tempo di attesa si annulla?
Oppure ci sono altri metodi di spegnimento dell'HD che non sia quello di spegnerlo fisicamente?
P.s. anzi vedo che c'è fuori la 1.02.08, va bene?

Anch'io avevo lo stesso problema del troppo tempo che impiegava per il riconoscimento dell'HD, non per la indicizzazione dei file che era velocissima,
più o meno 45 sec-1 min.
Con l'aggiornamento al 1.02.07 il tutto avviene in 7 o 8 sec. ed ho un my book 1 tb dell wd.
Quindi consigliatissimo l'aggiornamento.
Ora devo verificare anche lo spegnimento dell'HD stesso
Sikillo

[3nric0]

help plz
sto cercnda di installare la ext-boot3 ma nn ci riesco.
Ho messso in una chiavetta da 1 gb in fat 32 i file decompressi del firmware mod. la attacco al wdtv riconosce presenza nuovo fw dico si all'installazione, si riavvia, il led della chiavetta lampeggia, dopo un po esce il logo wdtv, qualche secondo dopo scompare, la chiavetta lampeggia sempre, appare la texture tipo parquet azzurro sena nullaltro, si riavvia, riappare il logo wdtv etcetc come in loop perenne continua cosi anche per mezzora
ma porc tro.. che sbaglio? i firm normali li piglia senza problemi, quello wdlxtv pure ma sto qui manco a morire ...:muro: :muro: :muro: :muro:

plz help:mc:

[Brother Pulene]

help plz

Ho messso in una chiavetta da 1 gb in fat 32 i file decompressi del firmware mod. la attacco al wdtv riconosce presenza nuovo fw dico si all'installazione, si riavvia, il led della chiavetta lampeggia, dopo un po esce il logo wdtv, qualche secondo dopo scompare, la chiavetta lampeggia sempre, appare la texture tipo parquet azzurro sena nullaltro, si riavvia, riappare il logo wdtv etcetc come in loop perenne continua cosi anche per mezzora



mhh.. non è che hai modificato il file wdtv.ver? Dentro c'è scritto questo? :

VERSION='1.02.07-ext3-boot-0.9.2'
LOCATION='wdtv.bin'

sembra quasi che veda un nuovo fw ogni volta e lo reinstalli.. almeno dovrebbe chiedertelo.. Da che fw sei partito per installare l'ext3-boot? Non è che hai altro sulla chiavetta? partizioni nascoste?

[Robby Naish]

Buona giornata a tutti,

premetto di essere abbastanza ignorante nella materia, quindi scusatemi in anticipo se la sparo grossa...

Ho letto un bel po dipagine in questo thread, ma tutte mi è impossibile, almeno a breve.

Ora ho un Htpc collegato ad un ottimo CRt Sony Trinitron FD87. Collegato con un pessimo svideo, ma la cosa strana (pensavo i CRT non ci arrivassero) arrivo tranquillamente alla risoluzione di 1024x768 (lo vedo con l'OSD di FFDSHOW).
Ieri (un po tardi:)) ho scoperto questo box WD, e mi pare interessante.

DOmanda: posso usarlo sul mio CRT?

Grazie

Ale

[3nric0]

mhh.. non è che hai modificato il file wdtv.ver? Dentro c'è scritto questo? :

VERSION='1.02.07-ext3-boot-0.9.2'
LOCATION='wdtv.bin'

sembra quasi che veda un nuovo fw ogni volta e lo reinstalli.. almeno dovrebbe chiedertelo.. Da che fw sei partito per installare l'ext3-boot? Non è che hai altro sulla chiavetta? partizioni nascoste?

Dunque il wdtv.ver è stato modificato in '1.02.09-ext3-boot-0.9.2' in quanto nel wdtv c'è il fw 1.02.08, forse puo essere come dice ti che lo reinstalli ogni volta ma nn dovrebbe chiederlo? Mi spiego meglio, dopo avere tentato l'installazione dell'extboot3, il wdtv nn parte quindi rimetto la 1.02.08 ( con un 'altra chiavetta) con il file wdtv. ver modificato anche lui in 1.02.09

[prepon]

se installi il fw ext3-boot:

scrivi in net.mounts:

xmount //<ip tuo PC>/"IndirizzoCartelladaCondividere" "NomeCartellaWDTV" cifs user="tuoUserWin",pass="tuaPasswordWin"

e condividi la cartella dalle Proprietà di Windows

se installi il fw WDLXTV:

oltre a fare quanto scritto sopra devi installare samba.app.bin di b-rad.cc (trovi tutto sul suo sito, spiegazioni comprese)

nota: questo vale per la condivisione CIFS che ti permette uno streaming di una fonte video 720p.. per definizioni più alte è più complicato e devi andare sulla condivisione NFS (qui (http://www.wdtvc.com/2009/04/01/setup-guide-for-wd-tv-nfs-sharing-on-windows/) la guida)



la cosa migliore è seguire i tutorial di b-rad.cc (http://b-rad.cc/optware-for-wdtv) ...
comunque è molto semplice.. metti opt.bin (http://rapidshare.com/files/207616110/opt.bin-0.2.zip) nella root, riavvii e fai l'update dell'optware (ipkg update da telnet).. a quel punto installi (ipkg [...] ) tutto ciò che ti può servire (client torrent,webgui, editor di testo, webserver e quant'altro)

Grazie mille Brother Pulente!
Appena ho un attimo di tempo (penso sabato) provo e spero di risolvere tutto!

[cionci]

Buona giornata a tutti,

premetto di essere abbastanza ignorante nella materia, quindi scusatemi in anticipo se la sparo grossa...

Ho letto un bel po dipagine in questo thread, ma tutte mi è impossibile, almeno a breve.

Ora ho un Htpc collegato ad un ottimo CRt Sony Trinitron FD87. Collegato con un pessimo svideo, ma la cosa strana (pensavo i CRT non ci arrivassero) arrivo tranquillamente alla risoluzione di 1024x768 (lo vedo con l'OSD di FFDSHOW).
Ieri (un po tardi:)) ho scoperto questo box WD, e mi pare interessante.

DOmanda: posso usarlo sul mio CRT?

La cosa è un po' diversa. La scheda video ti lavora a quella risoluzione (quindi le proporzioni delle immagini e delle icone sono di quella risoluzione), ma il CRT lavora a risoluzioni nettamente più basse che sono quelle PAL. Quindi da 1024x768 passi, lo fa già la tua scheda video, a qualcosa tipo 500x250 o qualcosa del genere.

[Robby Naish]

La cosa è un po' diversa. La scheda video ti lavora a quella risoluzione (quindi le proporzioni delle immagini e delle icone sono di quella risoluzione), ma il CRT lavora a risoluzioni nettamente più basse che sono quelle PAL. Quindi da 1024x768 passi, lo fa già la tua scheda video, a qualcosa tipo 500x250 o qualcosa del genere.

Si, 576xqlcosa :)

Senti, ma qs WD potrei attaccarlo momentaneamente in attesa di un FHD?

Grazie

Ale

[cionci]

Certo che potresti...

[Brother Pulene]

Dunque il wdtv.ver è stato modificato in '1.02.09-ext3-boot-0.9.2' in quanto nel wdtv c'è il fw 1.02.08, f
(...)
Mi spiego meglio, dopo avere tentato l'installazione dell'extboot3, il wdtv nn parte quindi rimetto la 1.02.08 ( con un 'altra chiavetta) con il file wdtv. ver modificato anche lui in 1.02.09

Mhh.. Premetto che non sono un espertissimo quindi il mio è solo buon senso, chi ha una soluzione "tecnica" si faccia avanti.. Comunque ti converrebbe installare il fw originale.. cancellare tutto dalla chiavetta e lasciare solo i file di installazione di ext3-boot + wdtv.ver. Se non ricordo male passando dal fw originale al'ext3 il wdtv riconosce il file .ver diverso e ti chiede di fare l'aggiornamento.

Il mio consiglio insomma è di fare un passaggio per volta con tranquillità.. Io ho fatto cambiamenti di fw parecchie volte senza problemi.. al limite se non compare l'aggiornamento modifico il .ver..

[cionci]

Nono, nella chiavetta ci deve essere anche root.bin.
Il fatto che non termini il boot mi sembra strano. Quale chiavetta hai usato ? Non è per caso una chiavetta che supporta U3 (http://www.troise.net/boliboop/u3-sandisk-e-le-applicazione-portatili/) ?
In tal caso c'è una partizione nascosta da eliminare per poter fare il boot.

[realtebo]

Ho letto in giro di gente entusiasta per il supporto uPnP del WDTV.

Ma chi si può fare? Io stavo giusto invece cercando come rimuovere la voce uPnP da 500 posti diversi creata automaticamente dal WDTV stesso.


Cioè: cose come tversity potranno mai girare sul WDTV? Se si, si può esesguire tversity e farla vedere direttamente dall'uPnP !? Forse sto facendo casotto, di certo anzi, ma vorrei altre idee su cosa farci del mio WDTV. Già ora tra weechat e aMule si sta divertendo di brutto... ma più lavora e più me lo ripago...

Tipo: è possibile vedere i video di youtube li su? Se si, come?

[cionci]

Il WDTV si usa in maniera diversa: fa da client UPnP, se hai un server UPnP in rete (molti NAS lo fanno) allora ti visualizza i file che ci sono su quel server UPnP.

Comunque lo puoi disattivare nel firmware ext3-boot: http://www.hwupgrade.it/forum/showthread.php?p=27486673#post27486673

[Robby Naish]

Certo che potresti...

Scusa la mia ignoranza...

Il mio Sony non ha HDMI, ma ha solo s-video + Rgb Scart e Scat normale.

Il WD ha HDMI e Composite A/V.
Il composito è svideo?

Grazie

Ale

[realtebo]

Il WDTV si usa in maniera diversa: fa da client UPnP, se hai un server UPnP in rete (molti NAS lo fanno) allora ti visualizza i file che ci sono su quel server UPnP.

Comunque lo puoi disattivare nel firmware ext3-boot: http://www.hwupgrade.it/forum/showthread.php?p=27486673#post27486673

Grazie per il link, ho fatto, tutto ok

La mia domanda andava oltre: chiedevo

Esiste già qualche package che faccia da SERVER uPnP per il WDTV? Perchè a quel punto .... il WDTV potrebbe ricevere stazioni radio, webTv, feed RSS, etc...

E' che non conosco ancora benissimo Linux in generale, sono solo 5 mesi che ci 'lavoro'

[supertoro]

Il mio Sony non ha HDMI, ma ha solo s-video + Rgb Scart e Scat normale.
Il WD ha HDMI e Composite A/V.
Il composito è svideo?

No, sono due standard diversi. Ti serve un adattattore composito - SCART tipo questo:

adattatore scart-rca s-video belkin -f8v3017aeagld

[cionci]

Il mio CRT Sony aveva anche il composito A/V (su un lato). Comunque, oltre agli adattatori esistono anche cavi con la scart da una parte ed il composito A/V dall'altra. Però attenzione perché ne esistono di due tipi, uno per usare l'apparecchiatura collegata alla scart come sorgente ed uno per usare l'apparecchiatura collegata al composito come sorgente (cambiano solo i collegamenti all'interno della scart).

[3nric0]

Dunque , ho 2 chiavette, una Cruzer da 8gb e una myflash da 1 gb, con entrambe riesco senza problemi ad installare i firmware originali ed anche il mod wdlxtv anzi , preferibilmente uso quella da 8gb ( quella che conteneva il software U3, in effetti ha ancora la cartella nascosta, ma allora xche il fw originale lo installo senza problemi? ).
Cmq Brother Pulene mi ha messo una pulce nell'orecchio , che ahime fino a stasera non potro levarmi.
Lui scrive del fatto che sembra continui a reinstallare il firmware. potrebbe essere che , visto che ho installato l'ufficiale 1.02.08 e per installare l' extboot3 forzo il wdtv.ver scrivendo 1.02.09 lui ogni volta che termina l'installazione del extboot3, rifacendo il boot dalla penna ne rivede uno nuovo, ( anche se è sempre lo stesso ) riparte senza chiedere l'autorizzazione ( l'extboot ha il 1.02.07 se nn erro )?

[cionci]

Non dovrebbe essere questo il problema. Io ho tenuto l'ext3-boot diversi giorni con il file .ver modificato. Semplicemente ti fa rivedere che c'è un aggiornamento disponibile.

In ogni caso è normale che ti faccia vedere la schermata con lo sfondo che sembra parquet, significa che il kernel è stato caricato. Questa dovrebbe però scomprarire e riapparire con lo splash screen dopo diversi secondi. L'avvio ti dovrebbe lasciare un file chiamato messages.txt all'interno della chiavetta. Me lo allegheresti ?

[3nric0]

lo zippo xche dice che è troppo grande ( 72KB )
per info i file presenti sulla chiavetta ( non la cruzer ) sono
WWW ( cartella )
Changelog
messages.txt
net.config
net.mounts
root.bin
wdtv.bin
wdtv.ver ( modificato in VERSION='1.02.09-ext3-boot.0.9.1'
LOCATION='wdtv.bin'
)
wireless-mod-wdlxtv.app.bin
wpa_supplicant.conf

quando tento di eseguire l'installazione al wdtv collego solo la pennina flash e null'altro
tra i vari tentativi una volta avevo lasciato anche la penna wifi collegata ( una dlick rev C1 ) che leggendo il message.txt era stata riconosciuta
grazie ancora per il supporto

[cionci]

Lascia solo wdtv.bin, root.bin, wdtv.ver, net.config e net.mounts (senza modificarli).
L' app.bin per il wireless non è corretto. Quello è per l'altro firmware ;) Quello corretto è questa: http://www.mediafire.com/?sharekey=6d110a20e6fb482361d4646c62b381cb4dc2b76b122e4c495be6ba49b5870170

[3nric0]

ok grazie stasera ci ritento, magari installo il wdtw firm 1.02.06 e poi gli passo l'extboot3

[cionci]

ok grazie stasera ci ritento, magari installo il wdtw firm 1.02.06 e poi gli passo l'extboot3
No, non importa. Rimetti solo quei file che ti ho detto.

[tribal123]

Tieni l'hd in mano, in silenzio, mentre spegni il WDTV.

Questa risposta era in merito al capire se l'HD si spegneva o meno....EVVIVA!! Con il 1.02.07 si spegne! Anche se rimane il led aceso, ma tutti i meccanismi interni si spengono!

Avevo sentito parlare anche di una funzione che faceva avanzare il film a scatti di 10 min. (per sopperire un pò al 16x) ma non ne vedo traccia, mi avevano contato balle?

[matteo1]

edit

[cionci]

No, basta mettere il film in fast forward e a questo punto ogni volta che si preme next il film avanza di 10 min.

[Andrea0080]

Potete darmi un consiglio su quale chiavetta Wi-Fi comprare per "mettere" in rete il mio WD TV?
Grazie

[Noitulove]

Prova a vedere qui (http://wiki.wdtv.org/doku.php?id=usb_wireless_dongles_table_page).
Ciao.

[cionci]

Questi sono tutti gli id usb abilitati nel wireless-mod.app.bin: http://pl.wiki.wdtv.org/doku.php?id=wlanusb

Io ho provato Asus WL-167G v2 e D-Link DWL-G122 rev C1, entrambe con chipset rt73. Non sono mai riuscito ad ottenere la piena stabilità. Dopo un intervallo compreso fra 6 e 18 ore il canale spariva improvvisamente ed era necessario il riavvio.

[Noitulove]

@cionci
Ciao, volevo chiederti una piccola info.
Come si attivano i Jumbo Packet che me ne parlavi in alcuni post fa?
Basta togliere il commento alla voce MTU=9000?
Grazie.

[cionci]

Sì, ma devono essere attivi anche dall'altra parte (ad esempio sul NAS).

[Parny]

wdtv.ver ( modificato in VERSION='1.02.09-ext3-boot.0.9.1')


Comunque, a meno che tu non abbia la 1.02.08 su, non serve nemmeno modificare la versione sul ver (sia per l'ext3 che per il WDLXTV). Te lo riconosce come nuovo firmware ugualmente...

[3nric0]

Ho su proprio quella, ed è la prima che mi spegne ( ferma ) l'HD a wdtv spento

[Brother Pulene]

Potete darmi un consiglio su quale chiavetta Wi-Fi comprare per "mettere" in rete il mio WD TV?

Esperienza personale sui 3 dongle che trovi più facilmente nelle grandi catene (nel mio caso Media***** - negozio fisico):

- Ho preso la Sitecom 54g (chipset zydas 1211b) [20€] e pur avendo il chipset giusto non era tra queste qui (http://pl.wiki.wdtv.org/doku.php?id=wlanusb) e in effetti non funzionava

- l'ho restituita e ho preso la D-Link Dwl-g122 Rev.C1(chipset tr73) [20€] ma non sono riuscito a farla funzionare in wlan open (Cionci comunque l'ha usata in wpa e dice che funziona)

- l'ho restituita ( :doh: ) e ho preso la Belkin F5D7050 v.4XXX (chipset zydas 1211b) [15€] e funziona benissimo..Ha pure una comoda prolunga con basetta da 1 metro..

Sto scaricando con rtorrent a 260KB/s dopo un po' di prove e sono soddisfattissimo..Se trovassi un modo per agganciargli gli rss feed dei telefilm potrebbe diventare il sostituto definitivo del utorrent che uso sul pc :D (unico cruccio non essere ancora riuscito a far funzionare wtorrent)

Spero ti sia utile ;-)

EDIT: stavo mettendoil wdtv sotto stress giusto ora (da cui i 260 KB/s) e non voleva saperne più di riaccendersi.. non vorrei fosse il surriscaldamento col caldo che fa.. cmq non inficia la discussione sulla trasmissione dati del dongle :-)

[cionci]

Anche io con entrambi i dongle con chipset rt73 non sono riuscito ad accedere alle reti open e wep, ma solo WPA.

[Brother Pulene]

Domanda per gli utenti linux (forse).. Siccome vorrei sostituire utorrent con rtorrent su wdtv e sento la mancanza dell rss feed.. ho visto questo oggettino, rsslder (http://code.google.com/p/rssdler/).. dite che lo posso caricare con ipkg?

Andando qui: http://ipkgfind.nslu2-linux.org/

non c'è.. Esiste per caso un altro companion di rtorrent per gli rss? Sennò devo sfruttare un rssreader esterno , ma non volevo girasse su win, sennò tanto vale ;-)

[Konron]

Vorrei "modificare" il mio WDTV per installarci rtorrent, eventualmente da gestire via wtorrent. Mi chiedevo però: funziona bene? vale la pena? Perché avrei da comprare l'adattatore USB-ethernet e mi spiacerebbe buttare soldi. A quel punto preferisco rivendere il WDTV e prendere un popcorn hour che ha il client torrent di default.
Quale delle due soluzioni funziona meglio?

Grazie!

[Brother Pulene]

Quale delle due soluzioni funziona meglio?

Grazie!

popcornhour ha il client e la connessione ethernet di default, wlan opzionale.. se non ti va di perdere qualche ora e avere comunque un sistema un pò zoppo (rtorrent crasha.. vedi post precedenti) ,e ti va di spendere quei 120/150 € più.. fiondati sul popcornhour.

Era la mia prima scelta (un mio amico ce l'ha ed è molto bello) ma poi per contenere i costi in vista dell'impianto HT mi sono "accontentato" del wdtv moddato.

Sta per uscire anche un altro lettore mkv nella stessa fascia di prezzo del wdtv con connessione ethernet e stesso chip.. ma ora che il sottobosco di sviluppatori tirerà fuori le mods..tanto vale il wdtv che ha già un bel pò di roba e continua a crescere

[cionci]

A me rtorrent non crasha mai ;) Da quando ho l'adattatore Ethernet ho fatto anche 4 giorni di fila di uptime

[Brother Pulene]

A me rtorrent non crasha mai ;)

sarà che sono un pasticcione :mc:

[shingetta74]

Volevo installar eun lettore dvdesterno.
Liteon

Ho provato a mettere il firmware moddato su usb ma non me lo vede all'avvio, che devo fare??

Grazie e scusate s enon ho letto 128 pagine di posts

[pegasolabs]

No, sono due standard diversi. Ti serve un adattattore composito - SCART tipo questo:

adattatore scart-rca s-video belkin -f8v3017aeagldI link a eshop singoli sono vietati.
Post editato.

[cionci]

Domanda per gli utenti linux (forse).. Siccome vorrei sostituire utorrent con rtorrent su wdtv e sento la mancanza dell rss feed.. ho visto questo oggettino, rsslder (http://code.google.com/p/rssdler/).. dite che lo posso caricare con ipkg?

Andando qui: http://ipkgfind.nslu2-linux.org/

non c'è.. Esiste per caso un altro companion di rtorrent per gli rss? Sennò devo sfruttare un rssreader esterno , ma non volevo girasse su win, sennò tanto vale ;-)
Dipende da come sono fatti questi feed rss, non dovrebbe essere difficile recuperare il link presente nel feed, scaricarlo con wget e metterlo nella directory osservata da rtorrent.

[3nric0]

Alleluia
dunque, ho provato come suggerito da cionci, messo sulla chiavetta solo i file consigliati ma nulla
messo su firmware originale .07 e rifatto upg a ex3boot, nulla ( con chiavetta cuzer che installa il fw orig senza prb)
rimesso FW. 07 e fatto upg alla extboot3 con chiavetta myflash... nulla
travato nuova chiavetta picodisk

messo u fw orig .07, rimesso extboot3 e ... tata......... digerito ora tento la chiavetta wifi

[Parny]

Domanda per gli utenti linux (forse).. Siccome vorrei sostituire utorrent con rtorrent su wdtv e sento la mancanza dell rss feed.. ho visto questo oggettino, rsslder (http://code.google.com/p/rssdler/).. dite che lo posso caricare con ipkg?

Andando qui: http://ipkgfind.nslu2-linux.org/

non c'è.. Esiste per caso un altro companion di rtorrent per gli rss? Sennò devo sfruttare un rssreader esterno , ma non volevo girasse su win, sennò tanto vale ;-)

Sarei molto interessanto anche io ad una cosa del genere.
Dando una letta veloce alle pagine su google code, sembra che quel programmino per gli rss abbia bisogno di Python (che sul WD si può installare via ipkg) più una libreria esterna di python, feedparser, che sul WD non c'è via ipkg, però comunque si potrebbe installare da sorgente (credo).

Quando ho un po di tempo faccio qualche prova...

[Brother Pulene]

Dando una letta veloce alle pagine su google code, sembra che quel programmino per gli rss abbia bisogno di Python (che sul WD si può installare via ipkg) più una libreria esterna di python, feedparser, che sul WD non c'è via ipkg, però comunque si potrebbe installare da sorgente (credo).

Quando ho un po di tempo faccio qualche prova...

tralaltro sembrerebbe esserci un applicativo migliore, pytvshows (http://sourceforge.net/projects/pytvshows/) che è fatto apposta per tvrss, che guarda caso è la mia fonte principale..

Su Synology l'hanno installato con successo: http://forum.synology.com/enu/viewtopic.php?f=38&t=5702

Io ho provato a installare python (ipkg install python25 unzip) ma mi da errore.. forse opt.bin è troppo piccola..

[Parny]

tralaltro sembrerebbe esserci un applicativo migliore, pytvshows (http://sourceforge.net/projects/pytvshows/) che è fatto apposta per tvrss, che guarda caso è la mia fonte principale..

Su Synology l'hanno installato con successo: http://forum.synology.com/enu/viewtopic.php?f=38&t=5702

Io ho provato a installare python (ipkg install python25 unzip) ma mi da errore.. forse opt.bin è troppo piccola..

Hai provato a fare un
ipkg update
prima di dare installare python?

Poi una domanda, parlo da niubbo, c'è una ragione precisa per mettere su la 2.5 invece che la 2.6 o la 3.0?

[Brother Pulene]

EDIT

[Brother Pulene]

Hai provato a fare un
ipkg update
prima di dare installare python?
c'è una ragione precisa per mettere su la 2.5 invece che la 2.6 o la 3.0?

mh.. l'update l'ho fatto ma non ha sortito effetto.. sulla versione di python ho semplicemente copiato quello che facevano su synology ;-)

..sicuramente sono ancora più niubbo di te.. Le poche cosa che so di informatica vengono dall'unico esame che ho fatto a ingegneria 7/8 anni fa :-D

comunque ho fatto la domanda su wdtvforum.. magari qualcuno mi risponderà..

[Parny]

Io sono riuscito ad installare python, semplicemente con:

ipkg update
ipkg install python25
ipkg install unzip

Però quando provo ad usarlo, con qualsiasi cosa, mi da il seguente errore
python2.5: can't load library 'libreadline.so.6'
che non ho la minima idea di cosa sia.

Cambiando discorso, parlando del file init che non riesci ad editare.
Accedendo con putty al WDTV prova dare il seguente comando:
ls -l
e scrivi i permessi che hai per l'init. E' una stringa strana del tipo: -rwxr-xr-x

Comunque sicuro che non funzioni con nano? L'ho fatto sabato scorso per la seconda volta e non mi dato nessun problema

[angelorc]

Ho scaricato un file mkv 4.36GB ma quando ho provato a passarlo sull'HD, che ha ancora 36GB liberi, mi è stato chiesto di liberare spazio (spazio disco insufficiente) perchè il file è troppo grande. Cosa devo fare visto che lo spazio in effetti c'è? Grazie.

[Brother Pulene]

Cambiando discorso, parlando del file init che non riesci ad editare.
Accedendo con putty al WDTV prova dare il seguente comando:
ls -l
e scrivi i permessi che hai per l'init. E' una stringa strana del tipo: -rwxr-xr-x

Comunque sicuro che non funzioni con nano? L'ho fatto sabato scorso per la seconda volta e non mi dato nessun problema

alla fine penso di avercela fatta, almeno ad editarlo.. chissà perchè windows mi diceva che c'erano dei file in sola lettura.. sbloccandoli magicamente ho editato..
Per la storia di python.. boh, probabilmente è meno ovvio di quanto sembra.

BTW, ho appena installato appletrailers... ma quanto è bello? figata vedere il trailer di sherlock holmes in HD :-D

[Parny]

Ho scaricato un file mkv 4.36GB ma quando ho provato a passarlo sull'HD, che ha ancora 36GB liberi, mi è stato chiesto di liberare spazio (spazio disco insufficiente) perchè il file è troppo grande. Cosa devo fare visto che lo spazio in effetti c'è? Grazie.

Il disco è formattato in FAT32 per caso?
Se si, devi per forza formattare con NTFS o ext3, il fat32 non può "salvare" file più grossi di 4GB.

alla fine penso di avercela fatta, almeno ad editarlo.. chissà perchè windows mi diceva che c'erano dei file in sola lettura.. sbloccandoli magicamente ho editato..
Per la storia di python.. boh, probabilmente è meno ovvio di quanto sembra.

BTW, ho appena installato appletrailers... ma quanto è bello? figata vedere il trailer di sherlock holmes in HD :-D

Per vedere se hai editato correttamente basta che riavvii il WDTV (stacchi e riattacchi la corrente o dai un reboot da telnet/ssh) e guardi se c'è ancora la cartella UPnP.

Comunque per editarlo ti conveniva farlo direttamente con nano sempre via ssh. Di sicuro non hai problemi di permessi...

[angelorc]

[QUOTE=Parny;27725621]Il disco è formattato in FAT32 per caso?
Se si, devi per forza formattare con NTFS o ext3, il fat32 non può "salvare" file più grossi di 4GB.


Grazie infinite Parny, gentilissimo. Ciao.

[angelorc]

[QUOTE=Parny;27725621]Il disco è formattato in FAT32 per caso?
Se si, devi per forza formattare con NTFS o ext3, il fat32 non può "salvare" file più grossi di 4GB.

Scusa ma io l'HD nn l'ho mai formattato; collegandolo e provare a formattare mi da come unica soluzione NFTS, mentre con una pen da 4 GB mi da come soluzione solo FAT32. Devo cmq eseguire una formattazione quindi? Grazie.

[Parny]

Gli HD esterni che ti vendono sono solitamente già formattati dal produttore in FAT32.
Comunque per essere sicuro del filesystem che attualmente hai, fai un click destro su Risorse del Computer->Gestione, o qualcoda del genere (ho win in inglese non so come l'hanno tradotto).
Dal menu a sinistra scegli Gestione disco.

Vedrai un elenco con tutti i dischi collegati e specificato il relativo file system.
Se vuoi formattare in NTFS, basta fare un click destro sul disco esterno e poi formatta scegliendo NTFS.

Nota bene che perdi tutti i dati memorizzati sul disco!!

Se hai intenzione di lasciare il disco sempre collegato al WDTV e accederci via rete con qualche adattatore ti conviene però considerare di formattarlo in ext3. Non è nemmeno leggibile da windows, ma permette prestazioni migliori con il WDTV.

PS. La Pen da 4GB lasciala in fat32, che non hai alcun vantaggio a portarla in ntfs (anzi forse perdi qualcosina in prestazioni).

[angelorc]

Gli HD esterni che ti vendono sono solitamente già formattati dal produttore in FAT32.
Comunque per essere sicuro del filesystem che attualmente hai, fai un click destro su Risorse del Computer->Gestione, o qualcoda del genere (ho win in inglese non so come l'hanno tradotto).
Dal menu a sinistra scegli Gestione disco.

Vedrai un elenco con tutti i dischi collegati e specificato il relativo file system.
Se vuoi formattare in NTFS, basta fare un click destro sul disco esterno e poi formatta scegliendo NTFS.

Nota bene che perdi tutti i dati memorizzati sul disco!!

Se hai intenzione di lasciare il disco sempre collegato al WDTV e accederci via rete con qualche adattatore ti conviene però considerare di formattarlo in ext3. Non è nemmeno leggibile da windows, ma permette prestazioni migliori con il WDTV.

PS. La Pen da 4GB lasciala in fat32, che non hai alcun vantaggio a portarla in ntfs (anzi forse perdi qualcosina in prestazioni).

Grazie ancora sei stato chiarissimo a gentile, ciao:)

[Brother Pulene]

Io sono riuscito ad installare python, semplicemente con:

ipkg update
ipkg install python25
ipkg install unzip

Però quando provo ad usarlo, con qualsiasi cosa, mi da il seguente errore
python2.5: can't load library 'libreadline.so.6'


stessa identica cosa.. peccato :-|
spero che averlo installato non renda il tutto più instabile..

[Brother Pulene]

@parny e chiunque sia interessato

allora.. c'è questo pacchetto "cron" (ipkg install cron) che è uno scheduler.. si legge il file crontab e lo esegue periodicamente...

c'è poi questo script: http://bash.madskas.net/files/tvrss

fatto apposta per prendere gli rss di tvrss , scaricare i .torrent e metterli nella cartella watch di rtorrent..

Tutto bello no? Il problema è che non riesco a farlo funzionare.. mi dice

cron: can't lock /opt/var/run/cron.pid, otherpid may be 5405: Resource temporarily unavailable

se avete voglia di aiutarmi a capire come funziona..grazie :-)

[V3rcingetorige]

Mi dovrebbe arrivare l'ASrock a giorni...
Vorrei metterci XBMC e poi compararlo un po' col WDTV...

Bye!

[3nric0]

wow anche pennina funziona ora sta in rete.
ora una nuova domanda. Ho un disco di rete ( landisk ) che attualmete viene utilizzato per metterci tutti i divx e vederli attraverso la cara vecchia XBOX ( XBMC )
ho fatto solo un tentativo modificando il file netmount nel seguente modo:

"xmount //192.168.1.02/nome_condivisione nome_condivisione cifs user=username,pass=password"

è corretto?

dove dovrei vedere l'icona della condivisione del disco?

grazie
enrico

[Fantaman]

Credo che nell'indirizzo ip non ci vada lo 0 prima del 2. :D

[cionci]

Questo disco di rete supporta UPnP ? In tal caso non hai bisogno di fare alcun mount.

Il comando comunque sembra essere corretto. Testalo prima da riga di comando.
Entri in telnet o SSH sul WDTV. Dai il comando e vedi se scrivendo:

ls /tmp/media/usb/nome_condivisione

ti visualizza i file.

Edit: non avevo notato lo 0 prima del 2 :doh:

[Robby Naish]

Che tu sappia non c'è possibilità di migliorare ancora in scrittura? 2.5MB/s sono pochini...

Vale anche su una pen usb?

Ho una Kingston da 16GB nuova, come la formatto ext3 inmodo veloce e senza installare distro strane? C'è un modo?

Grazie

Ale

[3nric0]

lo 0 potrebbe essere un "refuso" di digitazione , cmq controllero stasera come suggerito via telnet. Per la domanda se supporta UPnp, la risposta non l'ho, ne saprei come trovarla, ma cosa significa lato compilazione del netmount che se supporta Upnp non c'è bisogno di darli il comando mount? Se dovesse supportare upnp cosa dovrei dirgli?

il fatto che tramite XBMC lo raggiungo con SMB non mi puo aiutare?

[Parny]

Vale anche su una pen usb?

Ho una Kingston da 16GB nuova, come la formatto ext3 inmodo veloce e senza installare distro strane? C'è un modo?

Grazie

Ale

Io per formattare in ext3 senza installare linux solitamente uso http://gparted.sourceforge.net/livecd.php

[cionci]

Se supporta UPnP sfogliando le directory sulla televisione trovi i file dentro UPnP senza fare niente ;)
In ogni caso vai avanti così non dovresti avere problemi.

Robby Naish: scarica una distribuzione live di Linux, ad esempio Ubuntu. Avvia la Live ed avvia lo strumento che si trova in sistema -> Amministrazione -> Editor di partizioni.
Selezione la chiave usb e formatta in ext3. Puoi usare direttamente la live per metterci i file sopra.
Le chiavi USB raramente superano i 2-3 MB/s in scrittura quindi non ci sono comunque problemi.

[cionci]

Io per formattare in ext3 senza installare linux solitamente uso http://gparted.sourceforge.net/livecd.php
Ottimo anche questo.

[angelorc]

Gli HD esterni che ti vendono sono solitamente già formattati dal produttore in FAT32.
Comunque per essere sicuro del filesystem che attualmente hai, fai un click destro su Risorse del Computer->Gestione, o qualcoda del genere (ho win in inglese non so come l'hanno tradotto).
Dal menu a sinistra scegli Gestione disco.

Vedrai un elenco con tutti i dischi collegati e specificato il relativo file system.
Se vuoi formattare in NTFS, basta fare un click destro sul disco esterno e poi formatta scegliendo NTFS.

Nota bene che perdi tutti i dati memorizzati sul disco!!

Se hai intenzione di lasciare il disco sempre collegato al WDTV e accederci via rete con qualche adattatore ti conviene però considerare di formattarlo in ext3. Non è nemmeno leggibile da windows, ma permette prestazioni migliori con il WDTV.

PS. La Pen da 4GB lasciala in fat32, che non hai alcun vantaggio a portarla in ntfs (anzi forse perdi qualcosina in prestazioni).

Il relativo file system dall'HD è NFTS devo cmq formattare scusa la mia ignoranza.

[Andrea0080]

Il relativo file system dall'HD è NFTS devo cmq formattare scusa la mia ignoranza.

Non ce nè bisogno.

[angelorc]

Non ce nè bisogno.

e allora come faccio a passare il file mkv che mi dice che il disco è pieno quando ancora ci sono circa 36GB?

[cionci]

e allora come faccio a passare il file mkv che mi dice che il disco è pieno quando ancora ci sono circa 36GB?
Non è possibile scrivere sulle partizioni NTFS, almeno se non si fanno alcune modifiche.

[Andrea0080]

Scusa cionci, ma una semplice copia di un file, anche se superiore ai 4Gb, te li deve far copiare su hd con file system NTFS.

[cionci]

Tramite FTP, Samba o NFS collegandosi al WDTV attualmente non è possibile scrivere dati sulle partizioni NTFS ;)
Bisogna montare il disco in scrittura manualmente. In ogni caso è sconsigliabile perché le velocità sono veramente minime (se non mi ricordo male intorno ai 400 KByte/s).

[angelorc]

Tramite FTP, Samba o NFS collegandosi al WDTV attualmente non è possibile scrivere dati sulle partizioni NTFS ;)
Bisogna montare il disco in scrittura manualmente. In ogni caso è sconsigliabile perché le velocità sono veramente minime (se non mi ricordo male intorno ai 400 KByte/s).

ho provate con un altro HD maxtor e me lo fa copiare, sul mio mi da sempre spazio insufficiente c'è qualche soluzione?

[Andrea0080]

Tramite FTP, Samba o NFS collegandosi al WDTV attualmente non è possibile scrivere dati sulle partizioni NTFS ;)
Bisogna montare il disco in scrittura manualmente. In ogni caso è sconsigliabile perché le velocità sono veramente minime (se non mi ricordo male intorno ai 400 KByte/s).

Ah ok, avevo capito male io

[cionci]

ho provate con un altro HD maxtor e me lo fa copiare, sul mio mi da sempre spazio insufficiente c'è qualche soluzione?
Il maxtor probabilmente era formattato in fat32.

[Robby Naish]

Ragazzi, sono dei vostri!!

Appena preso!!!

Una sola pregunta: ma è normale che l'ali sia "Asian type" con adattatore per europa?

FW 1.01.02

grazie

Ale

[angelorc]

Il maxtor probabilmente era formattato in fat32.

no Cionci ho controllato come da suggerimento di Parni da gestione disco su risorse e mi da anche il maxtore in NFTS. Col copia e incolla li me lo faceva passare, sul mio mi dice di fare una pulitura disco...spazio insufficiente.......ma ho 36GB liberi. se c'è una soluzione potrei provare.....grazie.

[cionci]

Ah, ma con l'hard disk collegato al PC ? Ah, allora ok, non avevo capito niente.
Devi controllare l'hard disk da Windows con

chkdsk /f x:

con al post di x: la lettera d'unità assegnata al disco.

[Parny]

Tu stai cercando di copiare il file al disco collegato via USB al computer?
O stai cercando di passare il file via rete al disco collegato al WDTV?

[angelorc]

Ah, ma con l'hard disk collegato al PC ? Ah, allora ok, non avevo capito niente.
Devi controllare l'hard disk da Windows con

chkdsk /f x:

con al post di x: la lettera d'unità assegnata al disco.

cioè da start-esegui? scusa ma abbi pazienza grazie non sono così pratico ma riesco a cavarmela....

[Andrea0080]

Ah, ma con l'hard disk collegato al PC ? Ah, allora ok, non avevo capito niente.
Devi controllare l'hard disk da Windows con

chkdsk /f x:

con al post di x: la lettera d'unità assegnata al disco.

Allora avevo capito bene io prima... era una semplice copia di un file superiore a 4GB dal PC all'HD (FilseSystem NTFS).

[angelorc]

Tu stai cercando di copiare il file al disco collegato via USB al computer?
O stai cercando di passare il file via rete al disco collegato al WDTV?

voglio copiare il file al disco collegato via USB al computer

[Andrea0080]

cioè da start-esegui? scusa ma abbi pazienza grazie non sono così pratico ma riesco a cavarmela....

Start-->Esegui e scrici cmd
ti appare la shell Dos e scrivi chkdsk /F nomepartizioneharddisk:

[cionci]

Attenzione perché ti potrebbe anche eliminare dei file, quindi copia prima tutto quello che ti riesce copiare.

[angelorc]

scusate ma è in FAT32 avevo sbagliato. cmq per filesystem intendete il nome che io ho dato all'HD? perchè ho provato mami da percrso non trovato probabilmente sbaglio qlc ma non so cosa....... aiuto.... grazie

[cionci]

Allora se è in fat32 non accetta file più grandi di 4 giga.

[angelorc]

Allora se è in fat32 non accetta file più grandi di 4 giga.

quindi non mi resta che formattare ovviamente in NFTS... giusto?

[Andrea0080]

quindi non mi resta che formattare ovviamente in NFTS... giusto?

Si ti conviene, per file system si intende il modo in cui il sistema operativo gestsce la memorizzazione dei dati (FAT32-NTFS).

[angelorc]

chiedo scusa a tutti per la mia disattenzione e per il tempo che vi ho fatto perdere......

[Andrea0080]

chiedo scusa a tutti per la mia disattenzione e per il tempo che vi ho fatto perdere......

Quali scuse, figurati. I forum sono qui per questo ci aiutiamo a vicenda. Prima avevo chiesto aiuto io e mi hanno risposto ora lo hai chiesto tu e tutto si è risolto. W Internet (usato correttamente).

[angelorc]

grazie a tutti :) :)

[Robby Naish]

Ragazzi, sono dei vostri!!

Appena preso!!!

Una sola pregunta: ma è normale che l'ali sia "Asian type" con adattatore per europa?

FW 1.01.02

grazie

Ale

ragazzi, mi sapete rispondere?

[Andrea0080]

ragazzi, mi sapete rispondere?

Anche quello che ho preso per un amico era così, se posso che zona di Roma lo hai comprato?

[Robby Naish]

92 euro, balduina

Pensavo fosse un modello "Import"

ciao

Ale

[Andrea0080]

92 euro, balduina
Pensavo fosse un modello "Import"
ciao
Ale

Stesso prezzo diverso negozio... penso solo che hanno modificato la confezione.

[Robby Naish]

Quindi il tuo non ha Alimentatore Asian type con adattatore?

Gli altri del forum che tipo di Alimentatore avete?

Grazie

Ale

[Brother Pulene]

Quindi il tuo non ha Alimentatore Asian type con adattatore?

Gli altri del forum che tipo di Alimentatore avete?


Guarda.. io ho un alimentatore "neutro" su cui puoi montare la spina asiatica (tre poli, uno vertical e due orizzontali a sez. rettangolare) o la spina classica "europea" due poli ..Semplicemente sfilando la spina da un binarietto in plastica. A livello di corrente/tensione invece non ho idea se ci siano differenze rispetto alla rete asiatica.

Comprato su Moncl***.

[cionci]

Guarda.. io ho un alimentatore "neutro" su cui puoi montare la spina asiatica (tre poli, uno vertical e due orizzontali a sez. rettangolare) o la spina classica "europea" due poli ..Semplicemente sfilando la spina da un binarietto in plastica. A livello di corrente/tensione invece non ho idea se ci siano differenze rispetto alla rete asiatica.
Idem...

[Robby Naish]

allora è lo stesso.

Pensavo fosse "farlocco" perche aveva già montato l'adattatore Asia, e sul foglietto c'era scritto a caratteri cubitali "ASIAN VERSION"

grazie

Ale

[NETGH0ST]

ciao raga anche io sono dei vostri l'ho preso da computer disount a 99 euri, a parte il telecomando, che non è molto sensibile sono soddisfatto, ho anche fatto il primo aggiormamento firmware perchè era un po vecchiotto....

[cionci]

A me sinceramente il telecomando prende esattamente un comando ogni volta che premo un tasto. L'unica cosa è che deve essere diretto esattamente verso il WDTV, non so se ti riferissi a questo.

Se non fosse così, guarda la seconda parte di questa pagina: http://wdtv.wetpaint.com/page/Remote+Control+Issues

[JACK83]

ma se voglio andare a metà film c'è un modo + veloce che aspettare che scorra avanti a 16x?

[cionci]

ma se voglio andare a metà film c'è un modo + veloce che aspettare che scorra avanti a 16x?
L'abbiamo detto un paio di pagine fa: premi avanti veloce ed a questo punto avanzi di 10 minuti ogni volta che premi Next (>>|).

[JACK83]

L'abbiamo detto un paio di pagine fa: premi avanti veloce ed a questo punto avanzi di 10 minuti ogni volta che premi Next (>>|).

denghiu!!:D cmq ho questo gioiellino da qualche mese e devo dire che sono davvero soddisfatto sopratutto visto il costo;)

[3nric0]

Rieccomi
ho provato a rivedere il file netmount era scritto senza lo 0 ma proprio nn accede alla risorsa condivisa sul disco di rete
anche con putty da wdtv scrivendo
ls /tmp/media/usb/emule dove emule è il nome della cartella condivisa non succede una mazza

altro aiutino?
:mc:

[realtebo]

Se avete frequentato il wdtvforum (http://wdtvforum.com/main/index.php?topic=810.0) ultimamente forse sapete del nuovo plugin OSD: si possono vedere le previsioni del tempo, anche dei COMUNI italiani, direttamente nella home del WDTV

Contemporaneamente un RSS sarà 'scrollato' sul basso del teleschermo ....

... voglio che faccia il caffè ora !

[angelorc]

[QUOTE=cionci;27733267]A me sinceramente il telecomando prende esattamente un comando ogni volta che premo un tasto. L'unica cosa è che deve essere diretto esattamente verso il WDTV, non so se ti riferissi a questo.

Cionci e tutti quelli che hanno problemi col telecomando: ho risolto il problema del telecomando non è un problema di lcd Samsung ma di settare il WD nelle impostazione audio/video su risoluzione schermo a 50HZ e non lasciare auto. Fatto ciò il mio telecomando ha ripreso a funzionare; avevi ragione tu, avevo portato il WD alle impostazioni predefinite e il settaggio di cui sopra è ripartito da auto.... ora è tutto ok!!

[angelorc]

Tu stai cercando di copiare il file al disco collegato via USB al computer?
O stai cercando di passare il file via rete al disco collegato al WDTV?

Scusa Parny non ti avevo risposto voglio copiare il file al disco collegato via USB al computer l'HD è in FAT32.......poi ho capito che devo formattare......grazie ancora

[cionci]

Cionci e tutti quelli che hanno problemi col telecomando: ho risolto il problema del telecomando non è un problema di lcd Samsung ma di settare il WD nelle impostazione audio/video su risoluzione schermo a 50HZ e non lasciare auto. Fatto ciò il mio telecomando ha ripreso a funzionare; avevi ragione tu, avevo portato il WD alle impostazioni predefinite e il settaggio di cui sopra è ripartito da auto.... ora è tutto ok!!
Imho è comunque un problema di interferenza con l'lcd. Quasi tutti gli LCD dovrebbero funzionare almeno a 60 Hz ;)
Prova temporaneamente ad allontanarlo il più possibile o ad interporre qualcosa (una lamina di metallo sarebbe l'ideale fra WDTV e LCD) e riprova con i 60 Hz.

[Robby Naish]

Imho è comunque un problema di interferenza con l'lcd. Quasi tutti gli LCD dovrebbero funzionare almeno a 60 Hz ;)
Prova temporaneamente ad allontanarlo il più possibile o ad interporre qualcosa (una lamina di metallo sarebbe l'ideale fra WDTV e LCD) e riprova con i 60 Hz.

Ciao,

senti, come mai sul mio è fisso su auto e non mi permette il cambio? In pratica non mi da opzioni. FW 1.01.02

Altra domanda: Stavo provando alcuni traile a 720p, e uno mi dice che non è possibile riprodurlo.
Gspot mi da:


Video: Codec : VP62 . Name: On2 VP6 / Flash

Ma che roba è? Kmplayer sul pc lo vede alla grande....

come posso renderlo digeribilo al piccoletto?

grazie e buon WE a tutti

Ale

[cionci]

Sarà il caso di passare al firmware 1.02.07 ? Inutile cercare di risolvere problemi quando magari li hanno già risolti nei firmware successivi ;)

[Robby Naish]

Sarà il caso di passare al firmware 1.02.07 ? Inutile cercare di risolvere problemi quando magari li hanno già risolti nei firmware successivi ;)

E pure te hai ragione :)

Senti, in questo momento sto con un EEE con megamonitor da 7" :), ergo mi sto ciecando.... mi linkeresti il MSG dove spiega come fare l'UPG del FW e del FW stesso? Scusami tanto....

ALtra domandina. esiste un sito dove ci sono raccolte fanarts, poster, banner, trame dei film? Ho solo traovato un sito per le serie

grazie

Ale

[cionci]

Non me ne intendo molto di questi siti...mi spiace.

Riguardo all'upgrade del firmware...è semplice: estrai il frimware ufficiale su una chiavetta o su un hard disk (mi raccomando uso la disconnessione sicura). Lo colleghi al wdtv e nel menu impostazioni ti appare un nuova icona: premi ok su questa e ti si riavvia da solo. Aspetta fino a quando il wdtv tornerà di nuovo all'interfaccia grafica (5-6 minuti).

[Diogene7]

Ciao a tutti, sono nuovo di questo forum :)
Ho appena comprato la wd tv, l'unica cosa che ho fatto è metterci il firmware 1.02.08. Devo fare qualcos'altro? C'è una guida o un riassunto? Mi piacerebbe leggere tutto il topic, ma sono più di 2600 post :D

[Parny]

ALtra domandina. esiste un sito dove ci sono raccolte fanarts, poster, banner, trame dei film? Ho solo traovato un sito per le serie


Per informazioni generiche (in inglese) c'è l'onnipotente http://www.imdb.com/
Poi se vuoi qualche locandina/trama in italiano di solito io vado su http://www.mymovies.it/
Per poster di film c'è questo che è gratuito ed ha parecchia roba (solo recente ed in inglese) http://www.impawards.com/

[Brother Pulene]

Ho appena comprato la wd tv, l'unica cosa che ho fatto è metterci il firmware 1.02.08. Devo fare qualcos'altro? C'è una guida o un riassunto?

Dipende da quello che vuoi farci.. Se volevi un lettore di file audio/video/foto sei a posto fino alla prossima release ufficiale del firmware.

Se invece ti va di giocare un pò con lo scatolotto e perderci un pò di tempo vai qui:
http://wdtvforum.com/main/index.php?board=8.0
o qui:
http://www.wdtvc.com/ (ci sono altri link ma per iniziare..)

fin'ora queste (a grandi linee) sono le funzionalità implementate dai vari plugin:

- connessione alla rete via ethernet (previo acquisto di adattatore ethernet/usb compatibile)
- connessione alla rete via wireless ((previo acquisto di dongle wi-fi compatibile)
- client torrent (rtorrent) + interfaccia web (wtorrent)
- condivisione file da PC (protocolli cifs, nfs...)
- modifica dell'interfaccia (qui non si è sviluppato granchè, ma chissene)
- visione dei trailer apple (direttamente da internet, no download!!)
- visualizzazione in homepage di rss e previsioni del tempo
- possibilità di usare il wdtv come una macchina linux (comandandolo via telnet) sfruttando i vari programmi optware installabili via ipkg

la scena è ancora viva (non so quanto durerà) , per cui c'è margine di miglioramento e nuove applicazioni.. Anche i firmware ufficiali dovrebbero evolversi (per esempio permettendo di navigare nei file .ISO) ma bisogna aspettare e sperare (se non sai programmare :-D )

Spero di esserti stato utile ;-)

[Diogene7]

La uso principalmente per vedere film, allora lascio il firmware 1.02.08 :D
C'è qualche plug'in da mettere? Non mi interessa la connessione ad internet.
Sei stato utilissimo! Grazie :)

[Brother Pulene]

La uso principalmente per vedere film, allora lascio il firmware 1.02.08 :D
C'è qualche plug'in da mettere? Non mi interessa la connessione ad internet.


non devi fare nulla ;-) Installa il fw nuovo di western digital quando uscirà.

[Diogene7]

Perfetto! Grazie tante!

[angelorc]

Imho è comunque un problema di interferenza con l'lcd. Quasi tutti gli LCD dovrebbero funzionare almeno a 60 Hz ;)
Prova temporaneamente ad allontanarlo il più possibile o ad interporre qualcosa (una lamina di metallo sarebbe l'ideale fra WDTV e LCD) e riprova con i 60 Hz.

Hai ragione se imposto il WD a 60HZ il telecomando non funziona più. HO settato il WD a 1080p 50hZ e ha ripreso a funzionare.... lascio così?...... visto che non mi da problemi....

[NETGH0ST]

Ciao a tutti, sono nuovo di questo forum :)
Ho appena comprato la wd tv, l'unica cosa che ho fatto è metterci il firmware 1.02.08. Devo fare qualcos'altro? C'è una guida o un riassunto? Mi piacerebbe leggere tutto il topic, ma sono più di 2600 post :D

ma dove hai preso il 1.02.08 ? a me nel sito ufficiale come ultimo da il 1.02.07

[cionci]

Non mettete l'1.02.08, è un firmware beta e sembra che abbia davvero tanti problemi.

[godai_69]

Non mettete l'1.02.08, è un firmware beta e sembra che abbia davvero tanti problemi.

Io lo sto usando da quando è uscito e mi funziona bene.

Ora riesco a vedere e "sentire" gli .MKV con audio Vorbis.

Quindi non torno indietro. :sofico:

[Robby Naish]

Un nuovo FW Mod...

osdMod v0.4 beta

File info available!

You can select the file info titles language: "es", "en" , "de", "fr", "it", "pt
http://i7.tinypic.com/80zey4x.jpg
http://i4.tinypic.com/86jeck4.jpg
http://i43.tinypic.com/2zj9ick.jpg


Con Cover piu grandi

http://i39.tinypic.com/25i3s7l.jpg

Code:
osdMod v0.4b by juliojs

****************************
* wdtv-osdmod.blogspot.com *
****************************

Based on elmarweber's event-osd

IMPORTANT: It's a BETA version, so USE AT YOUR OWN RISK.

Installation:
- It works with brad's WDLXTV, so install it.
- Copy "event-osd.app.bin" and "osdModv04b.app.event" to a pendrive's root.
- You must always keep pendrive puted in.
- If you turn on WDTV without the pendrive, it will load the default theme.

Functionalities:
- Posibility of view file info and synopsis before play the movie.
- "Photo" menu thumbnails increased to 200x200.
- "Home" menu thumnails are 6x2 at 192x230.
- Some "Home" menu changed.

How to use:
- To show the "file info" go over the folder who contains the file info / movie, and press ENTER like openning it, for exit press BACK.
- The movie info activates when you have a "datos.txt" file on the folder.
- If the folder doesn't have the "datos.txt" file, it shows the normal thumbnail mode.
- The folder must contain a "caratula.jpg" file, the file info will show it at 350x496. (You don't need to resize the images, keep them at the (higher) original resolution, WDTV will resize them without pixelize).
- The file "datos.txt" format:

version # For future versions..., now keep the "1"
language # File language, it can be: "es", "en" , "de", "fr", "it", "pt".
title # Movie title
Genre # Movie Genre/s
Duration # Movie duration
Cast # Movie cast
year # Movie year
synopsis # Movie synopsis



You have the "Prueba" folder to test the "file info", copy it directly to a HDD/pendrive.



- IMPORTANT: Each line represents a parameter, so you must keep each parameter in its own line (do't press intro in a line), if you put same parameter in different lines WDTV will think that it belongs to the next parameter.

- Important DON'T use "", use simple '' instead.

Beta version limitations/issues:
- It takes around 3 sec. in display the file info, beacause it has to generate the xml file.
- The special characters may cause problems on "datos.txt"
- You can put (ñ,á,é,í,ó,ú,ü,ç,ã,õ) nut they will be converted to normal letters eg: ñ->n ç->c
- If you enter to the video menu from the home and it shows directly the last file info viewed you must to press ENTER and when the normal file view is showed, press HOME.
- To avoid this, if you want to go to home menu from a "file info" menu, press BACK and then enter to a folder without the "datos.txt" and then press HOME.
- If you want to show file info, you must keep the movie folder name without spaces, use "_" or "-".

Qui il Blog dell'autore

http://wdtv-osdmod.blogspot.com/

3 versions mod for people who have WDLXTV or ext3-boot:

3 versions (WDLXTV, ext3-boot, Based on official)---> www.mediafire.com/?zzyqwnye5jm

Ciao

Ale

[Diogene7]

ma dove hai preso il 1.02.08 ? a me nel sito ufficiale come ultimo da il 1.02.07

L'ho preso da qui: http://www.wdc.com/wdtvprerelease/ , ora però rimetto la 1.02.07

@ cionci: Grazie, provvedo subito

Ma anche con la 1.02.07 si possono vedere le locandine in modalità miniatura? Sono uno spettacolo! Come faccio a caricarle?

[Radical]

Notevole!
Ma accede a quale sito x le informazioni dei film?

[xterminatorx]

Un nuovo FW Mod...

osdMod v0.4 beta



L'autore ha rimosso la mod per problemi di instabilità quindi vi consiglio di non installarlo

[Robby Naish]

Ad alcuni invece fuzniona benissimo, cmq lo sta fixando e ad ore metterà la nuova rel online

[Parny]

Molto carino quel mod...
Sarebbe proprio quello che sto cercando ma sembra ancora agli inizi.

Vi ricordo che, le cover dei film si possono vedere anche con il fw originale.
Basta salvare nella stessa cartella del file video una jpeg con lo stesso nome.
Per esempio, se il film si chiama NomeFilm.mkv, la cover la salvate come NomeFilm.jpg nella stessa cartella.

[Diogene7]

...
Vi ricordo che, le cover dei film si possono vedere anche con il fw originale.
Basta salvare nella stessa cartella del file video una jpeg con lo stesso nome.
Per esempio, se il film si chiama NomeFilm.mkv, la cover la salvate come NomeFilm.jpg nella stessa cartella.

Ottimo! Avrò un bel lavoro da fare! :D

[Robby Naish]

Ciao a tutti,

ho uno stranissimo problema con una Kingston da 16gb.

Formattata in NTFS, su un pc con una GA-Ma78GM-S2H (quindi Am2+ + 780G), sia con Xp sp2 che Vista, se copio un po di file, o uno un po grande (qualche centinaio di mega), si blocca. E mi da errore dicendo che i dati sono andati persi, e potrebbe essere problema HW o di rete!!.
In lettura va benissimo, ho provato a spostare file di 2GB dalla penna sul pc in oggetto, tutto ok.

La stessa penna funziona perfettamente su altri pc, e altre penne, OCZ, funzionano sul PC in ogetto.

Qualcuno sa di questa antipatica incompatibilità delle Kingston da 16GB con Motherboard Gigabyte 780G? Oppure cosa potrebe essere?
Avevo preso qusta penna per il WD :(

Grazie

ciao

Ale

[Il Castiglio]

ho uno stranissimo problema con una Kingston da 16gb...
Visto che il tuo problema non riguarda il WD, dovresti chiedere qui:
http://www.hwupgrade.it/forum/showthread.php?t=907378 :O

[Robby Naish]

Visto che il tuo problema non riguarda il WD, dovresti chiedere qui:
http://www.hwupgrade.it/forum/showthread.php?t=907378 :O

Infatti lo avevo fatto, appena mi ero accorto di essere palesemente OT (cmq, se sai qlc dimmelo, dai,...)

ciao

Ale

[angelorc]

cosa sono quei quadratini che ci sono in alto a destra nel menu opzioni del WD? avevo letto che si tratta di qualcosa che ha a che con gli mkv. io ne ho scaricato uno (4GB .mkv è possibile?) ma non me li fa selezionare.

[cionci]

Ti permette di accedere alla selezione dei capitoli, se sono presenti. Evidentemente nel tuo non ci sono.

[Diogene7]

Noto un po' di sfarfallio del menu, è normale? Uso la wd tv con una tv a tubo catodico. C'è qualche altro firmware che rende il menù più personalizzabile e un po' più veloce nello scorrere la lista dei film? Mi piacerebbe leggere i titoli dei film in elenco con un carattere un po' più grande.

EDIT: per ora ho messo il 1.02.07

[holly88]

salve a tutti....sn nuovo di hdd player e vorrei sapere se legge gli iso....ho molte immagini iso di dvd e vorrei sapere se è possibile leggerle senza masterizzarle e metterle in un lettore....è possibile??
e poi gli mkv si vedono bene cn il pc??
grazie mille

[3nric0]

Le iso vengono lette senza problemo, l'unico inconveniente è che non hai i menu.

NN capisco la seconda domanda, a cosa ti servirebbe il WDTV con il pc se gia il pc puo farti vedere gli MKV?

[holly88]

ho sbagliato sorry....volevo dire bene come il pc....:D :D :D :D :D :D
cmq se ho un dvd in iso come faccio a cambiare lingua??si può lo stesso anche senza menù??

[guar145]

tasto option sul telecomando e poi il primo quadraino Canali audio finche non trovi quello in ita...

[lellopisello]

Sapete per caso se esiste un telecomando universale capace di "imparare" le funzioni del WD TV ?
Mi sono stancato di avere sul divano 4 telecomandi!!!

[Peronz]

Logitech harmony modello 555;)

Confermo! Come telecomando è eccezionale!
Per il WD TV non c'è bisogno neppure di farli imparare i comandi.
Con la configurazione di default dal database Logitech funziona che è una meraviglia :D

[Peronz]

L'ho preso da qui: http://www.wdc.com/wdtvprerelease/ , ora però rimetto la 1.02.07

Come si fa a rimettere il firmware precedente?

[cionci]

Modifichi il file wdtv.ver e ci scrivi dentro una versione successiva a quella installata.
Ad esempio: 1.02.09

[jakumi]

ragazzi mi aiutatee???

ho comprato da poke ore qst magica scatoletta per vedere nel mio samsung 50"

i film in .mkw a 1080p

ho provato io sono leggenda ma purtroppo ogni 10 minuti la schermata mi si fa tutta verde e spixellata.... per risolvere il problema devo stoppare il film e rimetterlo in play, come posso risolvere a qst inconveniente... ho comprato qst prodotto apposta xke leggeva gli mkv a 1080 p :D:D

help me please

[Noitulove]

Hai aggiornato all'ultimo firmware disponibile, 1.02.07?
In caso negativo scaricalo da qui (http://www.wdc.com/global/webtracking/index.asp?id=1072&url=http://support.wdc.com/download/wdtv/WDTV_FW_1_02_07.zip).
Ciao.

[jakumi]

AGGIORNATO MA IL PROBLEMA PERSISTE HO PROVATO ANKE CN LA VERSIONE 1.02.08 BETA MA NIENTE

[jakumi]

Hai aggiornato all'ultimo firmware disponibile, 1.02.07?


TU AVEVI QST PROBLEMA???

HAI RISOLTO??

[cionci]

Il WDTV non supporta MKV con più di 4 reframe, è una limitazione hardware del chipset. Può essere quello il problema. Quelli più grandi di 10 GB solitamente sono codificati con 5 o 6 reframe. Nessun media player attualmente credo che supporti questo genere di file.

[lellopisello]

Logitech harmony modello 555;)

Ciao

Grazie

[lellopisello]

Confermo! Come telecomando è eccezionale!
Per il WD TV non c'è bisogno neppure di farli imparare i comandi.
Con la configurazione di default dal database Logitech funziona che è una meraviglia :D

Grazie

[prepon]

Grazie al vostro aiuto sono riuscito a far funzionare il wd in rete (per il momento solo in condivisione cifs, poi proverò quella nfs)!

ho installato anche il webserver, il plugin per i trailer apple,le previsioni e il feed rss!

ho installato anche rtorrent dagli optware, solo che non sono riuscito a capire come iìutilizzarlo, visto che dall'interfacciagrafica non appare, deve essere utilizzato per forza da telnet? e come?

grazie mille!

[cionci]

Questo post e il successivo: http://www.hwupgrade.it/forum/showthread.php?p=27653953#post27653953

Per visualizzare lo stato del download puoi accedere via telnet con il comando:

screen -r

Le directory di cui si parla nel primo post le devi creare sulla partizione da cui fai il boot del firmware.
Per trasferire i .torrent lo puoi fare tramite Windows copiando i torrent in /boot/torrent/watch

Per accedere al wdtv immetti questo nella barra degli indirizzi di esplora risorse:

\\indirizzoipdelwdtv\

[spaeter]

dove si trova una guida per inserire il plugin apple trailer? io uso il fw ext-boot3...
grazie
ciao!!

[3nric0]

dove si trova una guida per inserire il plugin apple trailer? io uso il fw ext-boot3...
grazie
ciao!!

anche io lo sto cercando!
grazie
e.

[Robby Naish]

Bellissimo nuovo FW pienamente funzionante

http://wdtv-osdmod.blogspot.com/2009/06/osdmod-v0405-ahora-si.html

http://i12.tinypic.com/89ja60x.jpg

http://i15.tinypic.com/87dy89d.jpg http://i10.tinypic.com/6l9aonl.jpg

http://i17.tinypic.com/73olv7t.jpg http://i10.tinypic.com/720xc8n.jpg
http://i7.tinypic.com/80zey4x.jpg


Installation:
- It works with brad's WDLXTV or zorander's ext3-boot, so install one of them. They are included on this folder.
- Copy "event-osd.app.bin", "osdMod.app.bin" and "osdModv04.app.event" to a pendrive's root.
- You must always keep pendrive puted in.
- If you turn on WDTV without the pendrive, it will load the default theme.

Functionalities:
- Posibility of view file info and synopsis before play the movie.
- "Photo" menu thumbnails increased to 200x200.
- "Home" menu thumnails are 6x2 at 192x230.
- Some "Home" menu changed.

How to use:
- To show the "file info" go over the folder who contains the file info / movie, and press ENTER like openning it, for exit press BACK.
- The movie info activates when you have a "data.txt" or "data.xml" file on the folder.
- Configure "data.txt" is much easy than "data.xml", you only have to use a paremeter for each line, but if you use "data.xml" you will not see the special characters, for example, if you have a "ñ" you will see a "ny", an "á" -> "a", etc...
- If the folder doesn't have the "data.txt" or "data.xml" file, it shows the normal thumbnail mode.
- The folder must contain a "poster.jpg" file, the file info will show it at 350x496. (You don't need to resize the images, keep them at the (higher) original resolution, WDTV will resize them without pixelize).
- The file "data.txt" format:

version # For future versions..., now keep the "1"
language # File language, it can be: "es", "en" , "de", "fr", "it", "pt" or "ru".
title # Movie title
Genre # Movie Genre/s
Duration # Movie duration
Cast # Movie cast
year # Movie year
rating # Movie rating
synopsis # Movie synopsis



You have the "Prueba" folder to test the "file info", copy it directly to a HDD/pendrive.
Also you have a "data.xml" for test it.


- IMPORTANT: Each line represents a parameter, so you must keep each parameter in its own line (do't press intro in a line), if you put same parameter in different lines WDTV will think that it belongs to the next parameter.
- IMPORTANT: DON'T use "", use simple '' instead.

Version limitations/issues:
- If you use the "data.txt" file it takes around 3 sec. in display the file info, beacause it has to generate the xml file.
- The special characters may cause problems on "data.txt"
- You can put (ñ,á,é,í,ó,ú,ü,ç,ã,õ) on the "data.xml" file but they will be converted to normal letters eg: ñ->n ç->c
- If you enter to the video menu from the home and it shows directly the last file info viewed you will see where are you really on the "filename" (down) you can move over the files/directories prerssing up or down arrows, then enter where you want and you will see the normal view again.
- To avoid this problem, if you want to go to home menu from a "file info" menu, press BACK and then, enter to a folder without the "data.txt" or "data.xml" and then press HOME.
- If you want to show file info, you must keep the movie folder name without spaces or special characters, use "_" or "-".

*

[pegasolabs]

Robby Naish potresti cortesemente usare le miniature. Immagini così grandi vanno ben oltre il layout del forum. (e non tutto hanno schermi da 24" :D )

[cionci]

Sarebbe interessante a questo punto fare uno script che recupera automaticamente copertine e informazioni ;)
Non è impossibile, solo che ci vuole molto tempo, ed è quello che mi manca...boh...ci penso un po'.

[Robby Naish]

Robby Naish potresti cortesemente usare le miniature. Immagini così grandi vanno ben oltre il layout del forum. (e non tutto hanno schermi da 24" :D )

hai ragione... è che dove le ho copiate erano piccole, ma poi il link no....

come posso ovviare senza doverle appoggiare su qlc server?

grazie e scusa

Ale

[Robby Naish]

Sarebbe interessante a questo punto fare uno script che recupera automaticamente copertine e informazioni ;)
Non è impossibile, solo che ci vuole molto tempo, ed è quello che mi manca...boh...ci penso un po'.

E' facile.
Usi Movie DB come "Ant movie catalog", poi importi i dati da internet e export su file .txt

ciao

Ale

[cionci]

E' facile.
Usi Movie DB come "Ant movie catalog", poi importi i dati da internet e export su file .txt
Chiarisci entrambi i termini, non sono molto aggiornato su come recuperare le informazioni dei film.
In ogni caso volevo fare qualcosa di automatico sul WDTV ;) Senza l'ausilio di un PC.

[pegasolabs]

hai ragione... è che dove le ho copiate erano piccole, ma poi il link no....

come posso ovviare senza doverle appoggiare su qlc server?

grazie e scusa

Aleimageshack e pctunerup ti danno già la vista a thumbnail.
Devi usare necessariamente hosting esterno.:)

[Robby Naish]

Chiarisci entrambi i termini, non sono molto aggiornato su come recuperare le informazioni dei film.
In ogni caso volevo fare qualcosa di automatico sul WDTV ;) Senza l'ausilio di un PC.

Capisco,

sicuramente si puo fare, ma non sono abile programmatore. Speriamo qlc lo implementi.
Invece, usando il PC, usi un programma tipo Ant Movie catalog, che ti crea una lista dei tuoi film, si scarica le info da internet in automatico, poi exporti i dati in un file .txt. Che è quello che utilizza il FW moddato per farti vedere tutte quelle belle info.

ciao

Ale

[spaeter]

dove si trova una guida per inserire il plugin apple trailer? io uso il fw ext-boot3...
grazie
ciao!!

beh, l'ho trovato e installato (è sufficiente copiare il file scaricato nella root della pennetta usb e fare un reboot del wdtv)

tutto ok a parte che i trailer 720p e 1080p si piantano, vanno a scatti e l'audio si perde...
credo dipenda dalla mia connessione internet... in modalità nfs vedo i film 1080p senza problemi quindi non credo sia la rete interna.

succede la stessa cosa anche a voi?

ciao!

ps: confermo che dipende dalla bontà della linea internet
Which one you can play without hick ups highly depends on your internet connection. Everything up to 480p should work on any "normal" DSL connection with 2-3 Mbit. For 720p you need at least 6Mbit and for 1080p 12Mbit or more should work. Although that is no guarantee. I can only play up to 720p without problems and I have a 16Mbit connection. A friend of mine with a 25Mbit connection on the other hand had no problems with the 1080p =)

[Diogene7]

Voi che firmware usate?? Io ho l'1.02.07.
Vorrei abbellire un po' la wd tv e velocizzarla (soprattutto quando si scorrono i film!) o ingrandire i caratteri quando sono in vista “elenco”.
Per quanto riguarda le locandine, per forza le devo mettere una per una o avere una penna wifi, o c'è un modo per scaricarli in automatico mentre è collegata al computer? Le ho prese da qui: http://www.fuorissimo.com/locandine/ ma sono proprio brutte, e ci metto un'eternità a scaricarle e rinominarle una ad una...

[lellopisello]

Molto carino quel mod...
Sarebbe proprio quello che sto cercando ma sembra ancora agli inizi.

Vi ricordo che, le cover dei film si possono vedere anche con il fw originale.
Basta salvare nella stessa cartella del file video una jpeg con lo stesso nome.
Per esempio, se il film si chiama NomeFilm.mkv, la cover la salvate come NomeFilm.jpg nella stessa cartella.

Ma le immagini si possono vedere solamente nel menù foto oppure si riescono a visualizzare al posto del nome del film o a fianco a questo in modalità video ?

[Parny]

Ma le immagini si possono vedere solamente nel menù foto oppure si riescono a visualizzare al posto del nome del film o a fianco a questo in modalità video ?

In "modalità video" vedi le cover se hai impostato la visualizzazione per miniature (mi sembra si chiami così, vado a memoria). Se lascia la modalità elenco ovviamente non vedi le cover...

Sarebbe interessante a questo punto fare uno script che recupera automaticamente copertine e informazioni ;)
Non è impossibile, solo che ci vuole molto tempo, ed è quello che mi manca...boh...ci penso un po'.

Mi offro per fare il betatester :D

[holly88]

sentite ma il wd tv si deve usare x forza cn un hd esterno....oppure se lo attacco al router posso usare i file del mio pc(naturalmente acceso)??

[jakumi]

Il WDTV non supporta MKV con più di 4 reframe, è una limitazione hardware del chipset
cosaaa? lmitazione hardware... io speravo di risolvere cio cn il prossimo aggiornamento ufficiale :(:( nn ho speranze quindi....

bhe allora c'e qlk altro formato video a 1080p che nn dia problemi cn wd hdtv??

io l'ho comprato apposta x quello ...

[cionci]

sentite ma il wd tv si deve usare x forza cn un hd esterno....oppure se lo attacco al router posso usare i file del mio pc(naturalmente acceso)??
Lo devi per forza utilizzare con un HD esterno o al limite, comprando un adattatore Ethernet->USB (gli Hamlet vanno bene) puoi fare in modo che possa leggere i file dal tuo PC (per i file a 1080p è necessaria la condivisione tramite nfs) o dal tuo NAS (tramite il supporto UPnP).

[cionci]

cosaaa? lmitazione hardware... io speravo di risolvere cio cn il prossimo aggiornamento ufficiale :(:( nn ho speranze quindi....

bhe allora c'e qlk altro formato video a 1080p che nn dia problemi cn wd hdtv??

io l'ho comprato apposta x quello ...
Non hai speranze con qualsiasi media player, che io sappia.
L'unica è ricodificare i filmati nello stesso formato, ma con 4 reframe ;)

[Lio78]

Non hai speranze con qualsiasi media player, che io sappia.
L'unica è ricodificare i filmati nello stesso formato, ma con 4 reframe ;)


Quale software utilizzate per fare le conversioni?
Io ne ho utilizzati diversi ma nessuno mi ha mai entusiasmato.

[prepon]

Questo post e il successivo: http://www.hwupgrade.it/forum/showthread.php?p=27653953#post27653953

Per visualizzare lo stato del download puoi accedere via telnet con il comando:

screen -r

Le directory di cui si parla nel primo post le devi creare sulla partizione da cui fai il boot del firmware.
Per trasferire i .torrent lo puoi fare tramite Windows copiando i torrent in /boot/torrent/watch

Per accedere al wdtv immetti questo nella barra degli indirizzi di esplora risorse:

\\indirizzoipdelwdtv\

Grazie ancora Cionci!
Appena ho un pò di tempo provo!

[holly88]

grazie cionci....il numero 1 :p

[Parny]

cosaaa? lmitazione hardware... io speravo di risolvere cio cn il prossimo aggiornamento ufficiale :(:( nn ho speranze quindi....

bhe allora c'e qlk altro formato video a 1080p che nn dia problemi cn wd hdtv??

io l'ho comprato apposta x quello ...

Sono pochissimi quelli con quel valore di reframe. Io ne ho solo 1 su una 20ina abbondante.

[Radical]

Sarebbe interessante a questo punto fare uno script che recupera automaticamente copertine e informazioni ;)
Non è impossibile, solo che ci vuole molto tempo, ed è quello che mi manca...boh...ci penso un po'.

Così com'era per la Xbox!

[Lio78]

Quale software utilizzate per fare le conversioni?
Io ne ho utilizzati diversi ma nessuno mi ha mai entusiasmato.

Scusate se mi auto quoto, ma sono curioso di sapere cosa utilizzate!

[3nric0]

beh, l'ho trovato e installato (è sufficiente copiare il file scaricato nella root della pennetta usb e fare un reboot del wdtv)



Protresti dirmi dove reperirlo?
grazie

[spaeter]

Protresti dirmi dove reperirlo?
grazie

lo trovi a questo link.
http://www.wdtvc.com/2009/05/09/new-version-of-apple-trailers-application-appletrailerfs-020-beta-released/

[jakumi]

Sono pochissimi quelli con quel valore di reframe. .

mi dici come posso sapere il valore reframe di un film e poi con quale programma convertirlo???

infine se lo converto con qualche programma...che differenza avra??? perde di qualita???

tanks

[jakumi]

nessuno lo sa un programma x vedere i reframe di un film^^^^???

[Il Castiglio]

Il WDTV non supporta MKV con più di 4 reframe, è una limitazione hardware del chipset. Può essere quello il problema. Quelli più grandi di 10 GB solitamente sono codificati con 5 o 6 reframe. Nessun media player attualmente credo che supporti questo genere di file.
Per non creare allarmismi, vorrei precisare che il limite massimo di ref-frame è di 5 (e non 4) per i 1080p
e di 11 o 12 per i 720p ... se ne era parlato a lungo qualche mese fa ;).
Quindi per i 720p praticamente il problema non si pone (solo pochi superano il limite) e per i 1080 ci sono problemi da 6 in su (con 5 si vedono bene).
nessuno lo sa un programma x vedere i reframe di un film^^^^???Io uso avinaptic

Ovviamente questo non è l'unico parametro da guardare, quindi un 1080p a 4-5 ref-frame può non vedersi bene per altre cause :muro:

[spaeter]

nessuno lo sa un programma x vedere i reframe di un film^^^^???

mi pare che questo dia tutte le info che servano.

http://mediainfo.sourceforge.net/it

[jakumi]

questo dia tutte le info che servano.

http://mediainfo.sourceforge.net/it

l'ho aperto con mediainfo.. ma qual e la voce ke mi indica i reframe??? scusate l'ignoranza .. ma nn trovo da nessuna parte reframe

[jakumi]

Per non creare allarmismi, vorrei precisare che il limite massimo di ref-frame è di 5 (e non 4) per i 1080p
e di 11 o 12 per i 720p ...:


ho appea esaminato i file con media info ... ho appena trovato la voce reframes e i film ke ho visto che mi danno la schermata verde sono IO sono leggenda e the island ed entrambi sono a 5 fotogrammi ... allora se tu dici ke a 5 fotogrammi nn deve dare problemi... qual e il problema^^

[Diogene7]

Voi che firmware usate?? Io ho l'1.02.07.
Vorrei abbellire un po' la wd tv e velocizzarla (soprattutto quando si scorrono i film!) o ingrandire i caratteri quando sono in vista “elenco”.
Per quanto riguarda le locandine, per forza le devo mettere una per una o avere una penna wifi, o c'è un modo per scaricarli in automatico mentre è collegata al computer? Le ho prese da qui: http://www.fuorissimo.com/locandine/ ma sono proprio brutte, e ci metto un'eternità a scaricarle e rinominarle una ad una...

Scusate anche a me, mi potete aiutare nella scelta del firmware?

[realtebo]

Ho realizzato personalmente un prototipo di applicazione per il WDTV.

Ho creato una OSD app che però non tocca assolutamente nessun file XML che permette di sfogliare la lista file dei bot di un determinato server irc, scaricandola dal web, e poi raggruppa per bot i file scaricabili. Il tutto via OSD. Quando avete trovato quello che vi interessa, cliccate su OK e il WDTV dice a weechat (client mirc leggerissimo) di scaricare il file in questione. Semplice no?

Per ora non è configurabile. Se volete provarlo dovete impostare come server irc.darksin.net , 'darksin' come nome del server, senza virgolette, e #L3gg3ndar1 come canale.

Tutte le info sono qui (http://weecommand.wordpress.com/): perdonatemi se è in inglese, ma l'idea è di ampliare l'audience. Credo che gli screenshot siano comprensibli in qualunque lingua

[Brother Pulene]

Per ora non è configurabile. Se volete provarlo dovete impostare come server irc.darksin.net , 'darksin' come nome del server, senza virgolette, e #L3gg3ndar1 come canale.

Tutte le info sono qui (http://weecommand.wordpress.com/): perdonatemi se è in inglese, ma l'idea è di ampliare l'audience. Credo che gli screenshot siano comprensibli in qualunque lingua

EDIT: configurato weechat con successo..Per i bug vado su wdtvforum :-)

[lellopisello]

[QUOTE=Parny;27801613]In "modalità video" vedi le cover se hai impostato la visualizzazione per miniature (mi sembra si chiami così, vado a memoria). Se lascia la modalità elenco ovviamente non vedi le cover...

Ok Grazie. Risolto!

[Fantaman]

Ho realizzato personalmente un prototipo di applicazione per il WDTV.

Ho creato una OSD app che però non tocca assolutamente nessun file XML che permette di sfogliare la lista file dei bot di un determinato server irc, scaricandola dal web, e poi raggruppa per bot i file scaricabili. Il tutto via OSD. Quando avete trovato quello che vi interessa, cliccate su OK e il WDTV dice a weechat (client mirc leggerissimo) di scaricare il file in questione. Semplice no?

Per ora non è configurabile. Se volete provarlo dovete impostare come server irc.darksin.net , 'darksin' come nome del server, senza virgolette, e #L3gg3ndar1 come canale.

Tutte le info sono qui (http://weecommand.wordpress.com/): perdonatemi se è in inglese, ma l'idea è di ampliare l'audience. Credo che gli screenshot siano comprensibli in qualunque lingua

Complimenti :ave:

[Lio78]

Io uso avinaptic


mi pare che questo dia tutte le info che servano.

http://mediainfo.sourceforge.net/it

Questi software in effetti sembrano in grado di dare tutte le informazioni per una migliore comprensione dei vari parametri utilizzati durante la creazione del video.
Però nessuno mi ha risposto sul software utilizzato per riconvertire i video in HD x il nostro scatolotto, magari utilizzando il contenitore .MKV.

Purtroppo quelli che ho trovato IO in giro non mi soddisfano, quindi chiedo a voi se avete trovato qualcosa che vi soddisfa!

[Parny]

Questi software in effetti sembrano in grado di dare tutte le informazioni per una migliore comprensione dei vari parametri utilizzati durante la creazione del video.
Però nessuno mi ha risposto sul software utilizzato per riconvertire i video in HD x il nostro scatolotto, magari utilizzando il contenitore .MKV.

Purtroppo quelli che ho trovato IO in giro non mi soddisfano, quindi chiedo a voi se avete trovato qualcosa che vi soddisfa!

Non esiste nulla di user friendly, un click conversione e via.
La quasi totalità di mkv in HD che girano sono compressi in x264.

L'encoder ha veramente tantissime impostazioni e di suo non ha nemmeno un'interfaccia grafica, si usa da linea di comando (penso che la maggior parte di mkv che girano siano encodati così).

Quindi il mio consiglio è lascia perdere. Comprati il WDTV che i film che non girano sono veramente pochissimi. Fare la conversione è solo una grandissima perdita di tempo (si parla di parecchie ore per singolo film), e se non conosci bene i vari codec perdi moltissimo in qualità.

Fai prima a "trovare" un'altra versione che gira.

[toppino]

Ho realizzato personalmente un prototipo di applicazione per il WDTV.

Ho creato una OSD app che però non tocca assolutamente nessun file XML che permette di sfogliare la lista file dei bot di un determinato server irc, scaricandola dal web, e poi raggruppa per bot i file scaricabili. Il tutto via OSD. Quando avete trovato quello che vi interessa, cliccate su OK e il WDTV dice a weechat (client mirc leggerissimo) di scaricare il file in questione. Semplice no?

Per ora non è configurabile. Se volete provarlo dovete impostare come server irc.darksin.net , 'darksin' come nome del server, senza virgolette, e #L3gg3ndar1 come canale.

Tutte le info sono qui (http://weecommand.wordpress.com/): perdonatemi se è in inglese, ma l'idea è di ampliare l'audience. Credo che gli screenshot siano comprensibli in qualunque lingua

Scusa ma una guida che sia più semplice da seguire non è che avresti voglia di postarla .....senza impegno e comunque grazie mille di tutto.........:D

[Il Castiglio]

Non esiste nulla di user friendly, un click conversione e via.
La quasi totalità di mkv in HD che girano sono compressi in x264.

L'encoder ha veramente tantissime impostazioni e di suo non ha nemmeno un'interfaccia grafica, si usa da linea di comando (penso che la maggior parte di mkv che girano siano encodati così).

Quindi il mio consiglio è lascia perdere. Comprati il WDTV che i film che non girano sono veramente pochissimi. Fare la conversione è solo una grandissima perdita di tempo (si parla di parecchie ore per singolo film), e se non conosci bene i vari codec perdi moltissimo in qualità.

Fai prima a "trovare" un'altra versione che gira.
Premetto che io la penso come te, le conversioni spesso sono solo perdite di tempo, pero' per chi fosse interessato consiglio questo 3D:
http://www.hwupgrade.it/forum/showthread.php?t=982617
inoltre nella stessa sezione del forum ci sono anche altre discussioni interessanti.

A volte comunque e' sufficiente una semplice ripassata(senza convertire nulla, semplicemente caricando e risalvando il file) con mkv merge gui per risolvere i problemi del WD ...

[Skeltor85]

Ciao a tutti :)

Sono un felice possessore di questo gioiellino e volevo chiedervi un'informazione:
trovo molto comodo ed esteticamente piacevole poter scegliere il film da vedere usando le miniature, ovvero l'elenco con le immagini delle locandine dei film (se presenti ovviamente).

Se non vado errato la visualizzazione di default prevedere 8 miniature nella schermata, volevo sapere: tale numero è modificabile?
Ci tengo a precisare che vorrei mantenere il firmware originale (naturalmente possiedo l'ultimo, 1.02.07) e non usare firmware custom.

Grazie :D

[cionci]

Senza firmware custom non puoi. Se non sbaglio con i firmware custom si arriva a 6x2, le ultime mod sembrano essere davvero molto interessanti.

[toppino]

Ma volendo utilizzare la versione osmod per i menu con le notizie del film devo eliminare le miniature gia inserite sia per le cartelle che per i file..???
Basta copiare i tre file in questione nella pennetta e poi per ogni file creare una cartella con dentro il film la locandina ed il file data.txt
Grazie dei chiarimenti :D

[Androua]

Dite che sarà possibile che con i prossimi firmware sia supportato l'audio vorbis??

[cionci]

Dite che sarà possibile che con i prossimi firmware sia supportato l'audio vorbis??
Sì, è già supportato nell'ultimo firmware beta.

[Androua]

Sì, è già supportato nell'ultimo firmware beta.

Bene .. attendo una rella stabile allora!!!

[Diogene7]

Una mano anche a me per favore...
Che firmware usate?? Io ho l'1.02.07.
Vorrei abbellire un po' la wd tv e velocizzarla (soprattutto quando si scorrono i film!) o ingrandire i caratteri quando sono in vista “elenco”.
Per quanto riguarda le locandine, per forza le devo mettere una per una o avere una penna wifi, o c'è un modo per scaricarli in automatico mentre è collegata al computer? Le ho prese da qui: http://www.fuorissimo.com/locandine/ ma sono proprio brutte, e ci metto un'eternità a scaricarle e rinominarle una ad una...

[Parny]

Una mano anche a me per favore...
Che firmware usate?? Io ho l'1.02.07.
Vorrei abbellire un po' la wd tv e velocizzarla (soprattutto quando si scorrono i film!) o ingrandire i caratteri quando sono in vista “elenco”.
Per quanto riguarda le locandine, per forza le devo mettere una per una o avere una penna wifi, o c'è un modo per scaricarli in automatico mentre è collegata al computer? Le ho prese da qui: http://www.fuorissimo.com/locandine/ ma sono proprio brutte, e ci metto un'eternità a scaricarle e rinominarle una ad una...

Con il firmware originale non puoi cambiare la dimensione dei font.
Per velocizzarla non si può fare nulla...

Per quanto riguarda le cover, non conosco nulla per scaricarle in automatico. Bisogna aspettare che qualche anima pia scriva uno script che lo faccia...
Poi non capisco il discorso della penna wi-fi. Hai il firmware originale o no?

[lellopisello]

Scusa ma una guida che sia più semplice da seguire non è che avresti voglia di postarla .....senza impegno e comunque grazie mille di tutto.........:D

concordo

[Diogene7]

Con il firmware originale non puoi cambiare la dimensione dei font.
Per velocizzarla non si può fare nulla...

Per quanto riguarda le cover, non conosco nulla per scaricarle in automatico. Bisogna aspettare che qualche anima pia scriva uno script che lo faccia...
Poi non capisco il discorso della penna wi-fi. Hai il firmware originale o no?

Per le locandine non fa niente allora, se è così va bene anche senza internet.
Vorrei dunque un'interfaccia un po' diversa e veloce, rispetto all'attuale 1.02.08. Qual'è il firmware migliore?

[cionci]

Bisogna aspettare che qualche anima pia scriva uno script che lo faccia...
Ci siamo quasi, devo solo risolvere un problemino ;)

[Parny]

Per le locandine non fa niente allora, se è così va bene anche senza internet.
Vorrei dunque un'interfaccia un po' diversa e veloce, rispetto all'attuale 1.02.08. Qual'è il firmware migliore?

A parte lo sfondo, i firmware modificati cambiano veramente poco l'interfaccia. Sul WDLXTV, se non ricordo male, c'è la possibilità di cambiare il numero di miniature che si vedono, in modo da aver le cover più grandi.
In generale i firmware mod ti danno la possibilità di lavorare sull'interfaccia per riuscire a mettere trame, cover e sfondi (cercati qualche screen nelle pagine addietro).
Però sono tutte cose che non velocizzano l'interfaccia, anzi di sicuro la rallentano.

Ci siamo quasi, devo solo risolvere un problemino ;)

Grande Cionci!!
Per curiosità, in cosa lo hai scritto?

[cionci]

Eccomi qua con la prima versione dello script per creare data.txt e poster.jpg per vedere copertina e dati dei film con osdMod 0.4.0.5 !!!
Questa è la versione per Linux desktop:

#!/bin/bash

directory=$1

if [ ${#directory} = 0 ]; then
directory="."
fi

directory=$( echo $directory | sed 's/\/$//' )

echo "Start searching for movies in $directory"
find $directory/* ! -name . -prune -type d > /tmp/movie_data.tmp

cat /tmp/movie_data.tmp |
while read movie; do

movie=$( basename "$movie" )

echo ""
echo "Try searching for $movie"

search_string=$( echo $movie | tr ' ' '+' )
wget -q -O /tmp/movie_data.tmp "http://filmup.leonardo.it/cgi-bin/search.cgi?ps=10&fmt=long&q=$search_string&ul=%25%2Fsc_%25&x=0&y=0&m=all&wf=0020&wm=wrd&sy=0"

movie_url=$( cat /tmp/movie_data.tmp | grep -B 1 -m 1 "FilmUP - Scheda:" | grep -m 1 . | cut -d \" -f 4 )

if [ ${#movie_url} = 0 ]; then
echo "$movie not found"
continue
fi

echo "$movie found at $movie_url"

wget -q -O /tmp/movie_data.tmp "$movie_url"

start_line=$( cat /tmp/movie_data.tmp | grep -B 3 -n "Titolo originale:" | head -n 1 | cut -d - -f 1 )

end_line=$( cat /tmp/movie_data.tmp | tail -n +$start_line | grep -n "<form method=\"POST\" action=\"/cgi-bin/e-card/hamcards.cgi\" target=\"_blank\">" | cut -d : -f 1 )

cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . > /tmp/movie_data.tmp

echo "1" > $directory/$movie/data.txt
echo "it" >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -m 1 . | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Genere:&nbsp;<" | tail -n 1 | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Durata:&nbsp;<" | tail -n 1 | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Regia:&nbsp;<" | tail -n 1 | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Cast:&nbsp;<" | tail -n 1 | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Nazione:&nbsp;<" | tail -n 1 | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Anno:&nbsp;<" | tail -n 1 | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> $directory/$movie/data.txt
echo "*****" >> $directory/$movie/data.txt
cat /tmp/movie_data.tmp | grep -A 1 ">Trama:<br>" | sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' | sed 's/Trama://' | sed '/$/N;s/\n *//' >> $directory/$movie/data.txt

wget -q -O /tmp/movie_data.tmp "http://filmup.leonardo.it/$( cat /tmp/movie_data.tmp | grep -A 2 "<form method=\"POST\" action=\"/cgi-bin/e-card/hamcards.cgi\" target=\"_blank\">" | tail -n 1 | cut -d \" -f 6 )"

poster_url=$( cat /tmp/movie_data.tmp | grep -A 1 "<u>scheda film</u>" | tail -n 1 | cut -d \" -f 2 )

if [ "$poster_url" = "filmup" ]; then
poster_url=$( cat /tmp/movie_data.tmp | grep -A 1 "<u>scheda film</u>" | tail -n 1 | cut -d \" -f 4 )
fi

wget -q -O "$directory/$movie/poster.jpg" "http://filmup.leonardo.it/posters/locp/$poster_url"

done
rm /tmp/movie_data.tmp

E questa è la versione per la shell del wdtv:

#!/opt/bin/bash

directory=$1

if [ ${#directory} = 0 ]; then
directory="."
fi

directory=$( echo $directory | /opt/bin/sed 's/\/$//' )

echo "Start searching for movies in $directory"
find $directory/* ! -name . -prune -type d > /tmp/movie_data.tmp

cat /tmp/movie_data.tmp |
while read movie; do

movie=$( basename "$movie" )

echo ""
echo "Try searching for $movie"

search_string=$( echo $movie | tr ' ' '+' )
/opt/bin/wget -q -O /tmp/movie_data.tmp "http://filmup.leonardo.it/cgi-bin/search.cgi?ps=10&fmt=long&q=$search_string&ul=%25%2Fsc_%25&x=0&y=0&m=all&wf=0020&wm=wrd&sy=0"

movie_url=$( cat /tmp/movie_data.tmp | grep -B 1 -m 1 "FilmUP - Scheda:" | grep -m 1 . | cut -d \" -f 4 )

if [ ${#movie_url} = 0 ]; then
echo "$movie not found"
continue
fi

echo "$movie found at $movie_url"

/opt/bin/wget -q -O /tmp/movie_data.tmp "$movie_url"

start_line=$( cat /tmp/movie_data.tmp | grep -B 3 -n "Titolo originale:" | head -n 1 | cut -d - -f 1 )

end_line=$( cat /tmp/movie_data.tmp | tail -n +$start_line | grep -n "<form method=\"POST\" action=\"/cgi-bin/e-card/hamcards.cgi\" target=\"_blank\">" | cut -d : -f 1 )

echo "1" > "$directory/$movie/data.txt"
echo "it" >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -m 1 . | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Genere:&nbsp;<" | tail -n 1 | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Durata:&nbsp;<" | tail -n 1 | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Regia:&nbsp;<" | tail -n 1 | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Cast:&nbsp;<" | tail -n 1 | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Nazione:&nbsp;<" | tail -n 1 | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Anno:&nbsp;<" | tail -n 1 | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> "$directory/$movie/data.txt"
echo "*****" >> "$directory/$movie/data.txt"
cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 1 ">Trama:<br>" | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' | /opt/bin/sed 's/Trama://' | /opt/bin/sed '/$/N;s/\n *//' >> "$directory/$movie/data.txt"

/opt/bin/wget -q -O /tmp/movie_data.tmp "http://filmup.leonardo.it/$( cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -A 2 "<form method=\"POST\" action=\"/cgi-bin/e-card/hamcards.cgi\" target=\"_blank\">" | tail -n 1 | cut -d \" -f 6 )"

poster_url=$( cat /tmp/movie_data.tmp | grep -A 1 "<u>scheda film</u>" | tail -n 1 | cut -d \" -f 2 )

if [ "$poster_url" = "filmup" ]; then
poster_url=$( cat /tmp/movie_data.tmp | grep -A 1 "<u>scheda film</u>" | tail -n 1 | cut -d \" -f 4 )
fi

/opt/bin/wget -q -O "$directory/$movie/poster.jpg" "http://filmup.leonardo.it/posters/locp/$poster_url"

done
rm /tmp/movie_data.tmp


Per usarlo sul WDTV, i prerequisiti sono:
- Installare osdMod 0.4.0.5
- Spostare ogni film nella sua directory. Il nome della directory deve essere composto da lettere, numeri e spazi, con le varie parole separate da spazi
- Installare gli Optware ed i programmi wget e sed (con le versioni già presenti sul WDTV ho avuto alcuni problemi)

Per creare lo script:
- date il comando

cat > /boot/osd_movie_data.sh

- incollateci lo script per il WDTV e date un invio e premente CTRL+D
- sudo chown +x /boot/osd_movie_data.sh
- il file può essere anche in un'altra posizione, potete crearlo dove volete ovviamente

Esempio d'utilizzo:

/boot/osd_movie_data.sh /tmp/media/usb/USB2/sdb1/film

In questo modo verranno scansionate tutte le directory in /tmp/media/usb/USB2/sdb1/film alla ricerca dei dati.

PS: non l'ho ancora provato con osdMod installato, perché sto scaricando una cosa bella lunga. Quindi preferisco riavviare più in là. Se qualcuno vuole testarlo è il benvenuto ;)

PPS: sono agli inizi con il bash scripting, abbiate pietà.
Tra l'altro ho trovato qualche strano bug sul WDTV, ad esempio questa istruzione produce output, ma se lo redirigo su un file il file risulta vuoto :confused: :mbe:

cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line .

Se la assegno ad una variabile mi dice che è troppo grande. Sembra quasi che si esaurisca lo spazio d'ambiente...
Quindi l'ho dovuta ripetere tutte le volte in pipe :muro:

PPPS: ovviamente funziona solo con i film in italiano, quindi ora non capisco perché ho scritto l'output in inglese :doh:

[Parny]

Grande Cionci, adesso lo provo

un paio di domande.

1) Per modOSD 0.4.5 intendi questo (http://translate.google.com/translate?client=tmpg&hl=en&u=http%3A%2F%2Fwdtv-osdmod.blogspot.com%2F2009%2F06%2Ffaq-y-manual-del-wdtv.html&langpair=es|en) ?

2) Da dove va a pescarsi le vari cover e trame? Tanto per capire che nome mi conviene dare alle cartelle, titolo internazionale o titolo italiano

3) Ho capito bene che ogni film deve avere una sua directory?

[cionci]

1) sì, ho scritto male, ora correggo
2) filmup.leonardo.it
3) sì, ogni film deve avere una sua directory

[Parny]

Allora ho fatto una prova prima prova sul WDTV.

Mi da questo errore:
Start searching for movies in /tmp/media/usb/WDTVdisk/provaOSDmod
osd_movie_data.sh: line 44: syntax error near unexpected token `newline'
osd_movie_data.sh: line 44: ` cat /tmp/movie_data.tmp | tail -n +$start_line | grep -m $end_line . | grep -m 1 . | /opt/bin/sed -e 's/<[^>][^>]*>//g' -e '/^ *$/d' >> '


Dentro la cartella /tmp/media/usb/WDTVdisk/provaOSDmod ci sono altre due cartelle, ognuna contentente un film.

Ho l'ext3-boot.

[cionci]

Ah, c'è un problema con il copia e incolla con nano. Purtroppo mette dei newline automaticamente, aspetta che studio un modo per incollarlo senza problemi ;)

[cionci]

Vai, modificata la modalità di creazione dello script ;)

[Parny]

Ok, sono riuscito a farlo andare. Alla fine ho semplicemente creato il file con gedit e l'ho copiato via ftp nel WDTV.

Lo script funziona. Scarica correttamente poster.jpg e data.txt.

C'è però un problema di visualizzazione sul WDTV, che non so se dipenda da come lo script genera il file data.txt o dal mio WDTV con osdmod che non funziona propriamente.

Ecco cosa si vede invece di trama etc (che comunque sono presenti nel file data.txt, ma forse formattati in modo sbagliato).
http://img7.imageshack.us/img7/598/osdmod1.th.jpg (http://img7.imageshack.us/i/osdmod1.jpg/)

Dopo pranzo provo a vedere se l'OSD mod funziona propriamente per capire che problema è.

PS. Scusate per la foto penosa

[cionci]

Andiamo bene, a me non fa vedere proprio niente, non c'è la locandina nella lista delle miniature e premendo ok mi fa partire il film.

[cionci]

Non è che funzioni molto bene questa mod. Riesce a recuperarmi i dati solo per un film :mbe:
Ora vediamo, magari gli faccio un po' di debug.

[Parny]

Si effettivamente non funziona questo gran che bene.

Te hai provato con le cartelle di prova? Ti funziona?
Le scarichi insieme al mod (American Gangster & c.)

A me quelle funzionano. Quelle in Italiano scaricate con il tuo script no...
Adesso faccio qualche prova e vedo cosa può essere.

Io ho notato un altro bug parecchio fastidioso.
In pratica, se entro nella pagina che visualizza tutte le varie info di un film e dopo torno alla home con il bottone blu del telecomando, o se spengo il WDTV (da telecomando) mentre visualizzo quella pagina, la volta successiva che provo a sfogliare i video salvati mi fa vedere sempre e solo quella pagina di prima.

Non c'è modo di sbloccarlo se non un reboot serio.

[Parny]

Piccolo aggiornamento.

Il bug di cui ho parlato nel post precedente è una cosa nota. C'è pure scritto nel readme. Non c'è soluzione.
Cioè, quando si vede ancora l'ultima descrizione del film vista invece delle varie cartelle da navigare, in realtà si sta comunque navigando per cartelle.
In basso è scritto il nome della cartella che si sta selezionando, ci si muove con le frecce su e giù, e poi si seleziona una cartella senza data.txt e torna tutto normale.

Un bel grande bug, parecchio fastidioso.

Ho notato un altra cosa. Le cartelle con i vari film non possono avere gli spazi. Una directory con gli spazi viene visualizzata come una normalissima directory senza data.txt.

Faccio qualche altra prova per vedere se riusciamo a far caricare sto benedetto file di testo...

EDIT.
Sono riuscito a fare caricare il file di testo scaricato con il tuo script. Basta togliere la riga con il paese e te lo carica.
Peccato che le lettere accentate e i caratteri strani non li legge manco morto.

Adesso vado a studiare che è meglio....

[elettrosciocco]

scusate, ho provato a cercare nel thread ma non ho trovato informazioni che sono riuscito a comprendere completamente

se compro un convertitore usb/lan o usb/wifi riesco con il firmware mod a visualizzare dal wdtv dei file su uno share sul pc o su una nas magari?

che modelli hw di questi convertitori si trovano in vendita nelle comuni catene dei centri commerciali?

a che serve fare il boot da usb? la porta usb non resta occupata poi?

[Parny]

Alla prima domanda la risposta è si. Ci sono alcuni limiti che dipendo dall'adattatore e dal tipo di share da cui il WDTV si prende i film.

Se ne hai la possibilità (cioè si riesci a portare un cavo di rete alla TV), ti conviene prendere un adattatore per rj-45. Rispetto a quelli wi-fi sono di gran lunga più facili da configurare e garantiscono prestazioni migliori.

Qua c'è una lista degli adattatori supportati: http://wiki.wdtv.org/doku.php?id=supported_usb_devices
Nella lista non c'è l'Hamlet HNU2GTX, che funziona benissimo e in Italia dovresti riuscire a trovare.
Io ho il D-Link DUB-E100 H/W Version B1. Funziona perfettamente però devi essere sicuro che sia quella versione di hardware (è scritto fuori anche sulla scatola), altrimenti non funziona.
Poi dovresti riuscire a trovare quello della Wii e quello della Apple.

Per gli adattatori Wi-Fi non mi esprimo che non ne ho provato nemmeno uno.

[toppino]

Jan 1 00:01:14 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:15 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:22 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:22 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:28 wdtv user.notice root: Now mounted:
Jan 1 00:01:28 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:28 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:28 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:28 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:28 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:28 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:28 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:28 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:28 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:28 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:28 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:28 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:28 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/110ee2b3-e557-47ec-ab49-a0ceb329e947 type ext3 (rw,data=ordered)
Jan 1 00:01:28 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:28 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:28 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:28 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:28 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:28 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:44:58 wdtv user.info kernel: usb 1-1: USB disconnect, address 5
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:28 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:28 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:28 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:29 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:29 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:29 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:29 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:29 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:29 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:29 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:29 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:29 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:29 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:29 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:29 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:29 wdtv user.info kernel: sda: sda1
Jan 1 00:00:29 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:29 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:29 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:30 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:30 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:30 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:30 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:30 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:30 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:30 wdtv user.warn kernel: sdb1
Jan 1 00:00:30 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:30 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:30 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:30 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:30 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:30 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:30 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:30 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:30 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0, internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:33 wdtv authpriv.info dropbear[710]: Running in background
Jan 1 00:00:33 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:33 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:34 wdtv user.notice root: /dev/sdb1: UUID="110ee2b3-e557-47ec-ab49-a0ceb329e947" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:44 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:44 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:48 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:50 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:55 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:55 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:55 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:55 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:56 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:57 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv daemon.notice statd[1359]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1359]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:00 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:01:01 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:01:01 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:01 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:01 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:09 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:09 wdtv user.info kernel: internal journal
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:10 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:11 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:18 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:18 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:24 wdtv user.notice root: Now mounted:
Jan 1 00:01:24 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:24 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:24 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:24 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:24 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:24 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:24 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:24 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/110ee2b3-e557-47ec-ab49-a0ceb329e947 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:25 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:25 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:25 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:25 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:25 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:25 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:25 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:25 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:25 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:25 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:25 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:25 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:25 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:25 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:25 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:25 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:25 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:25 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:25 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:25 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:25 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:25 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:25 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:25 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:25 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:25 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:25 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sda: sda1
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:26 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:26 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:26 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:26 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:26 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:26 wdtv user.warn kernel: sdb1
Jan 1 00:00:26 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:26 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:26 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:26 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:28 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:28 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:28 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:31 wdtv authpriv.info dropbear[705]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:32 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:32 wdtv user.notice root: /dev/sdb1: UUID="110ee2b3-e557-47ec-ab49-a0ceb329e947" TYPE="ext3"
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:33 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:33 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:33 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:36 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:42 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:42 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:46 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:47 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:47 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:48 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:48 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:48 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:48 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:52 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:53 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:53 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:53 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:54 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:54 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:55 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:57 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:57 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:57 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:57 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:58 wdtv daemon.notice statd[1401]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1401]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:01 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:01 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:08 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:08 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:08 wdtv user.info kernel: internal journal
Jan 1 00:01:08 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:08 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:09 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:10 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:10 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:10 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:17 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:17 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:23 wdtv user.notice root: Now mounted:
Jan 1 00:01:23 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:23 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:23 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:23 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:23 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:23 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:23 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:23 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:23 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:23 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:23 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:23 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:23 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/110ee2b3-e557-47ec-ab49-a0ceb329e947 type ext3 (rw,data=ordered)
Jan 1 00:01:23 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:23 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:23 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:23 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:23 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:23 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:07:39 wdtv user.info kernel: sdb: Current: sense key=0x0
Jan 1 00:07:39 wdtv user.info kernel: ASC=0x0 ASCQ=0x0
Jan 1 00:07:42 wdtv user.info kernel: sdb: Current: sense key=0x0
Jan 1 00:07:42 wdtv user.info kernel: ASC=0x0 ASCQ=0x0
Jan 1 00:26:03 wdtv user.debug kernel: eth0: header length data is error
Jan 1 00:26:03 wdtv user.debug kernel: eth0: invalid rx length 42052
Jan 1 00:30:28 wdtv user.debug kernel: eth0: header length data is error
Jan 1 00:30:28 wdtv user.debug kernel: eth0: invalid rx length 15971
Jan 1 03:12:04 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:04 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:17 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:17 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:21 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:21 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 03:12:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:25 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:25 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:25 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:25 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:25 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:25 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:25 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:25 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:25 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:25 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:25 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:25 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:25 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:25 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:25 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:25 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:25 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:25 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:25 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:25 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:25 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:25 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:25 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:25 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:25 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:25 wdtv user.info kernel: d
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:25 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:25 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:25 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:27 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:27 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:27 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:27 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:27 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:27 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:27 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:27 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:27 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:27 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:27 wdtv daemon.info utelnetd[568]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:27 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:28 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:28 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:28 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:28 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:28 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:28 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:28 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:28 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:28 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:28 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:28 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:28 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:28 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:28 wdtv user.info kernel: sda: sda1
Jan 1 00:00:28 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:28 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:28 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:28 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:28 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:28 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:28 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:28 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:29 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:29 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:29 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:29 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:29 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:29 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:29 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0, internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:29 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:30 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:30 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:31 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:31 wdtv authpriv.info dropbear[682]: Running in background
Jan 1 00:00:36 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:36 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:47 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:47 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:49 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:55 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:56 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:56 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:56 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:58 wdtv daemon.notice statd[1343]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1343]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:08 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:09 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:09 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:16 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:16 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:22 wdtv user.notice root: Now mounted:
Jan 1 00:01:22 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:22 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:22 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:22 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:22 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:22 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:22 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:22 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:22 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:22 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:22 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:22 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:02:13 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:02 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:03:03 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:03:08 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:03:30 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:36 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:26 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:27 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:27 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:27 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:27 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:27 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[712]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="110ee2b3-e557-47ec-ab49-a0ceb329e947" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:48 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:48 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:49 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:56 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:58 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:58 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:58 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:59 wdtv daemon.notice statd[1406]: Version 1.1.5 Starting
Jan 1 00:00:59 wdtv daemon.notice statd[1406]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:09 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:09 wdtv user.info kernel: internal journal
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:10 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:10 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:10 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:12 wdtv user.notice root: Now mounted:
Jan 1 00:01:12 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:12 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:12 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:12 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:12 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:12 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:12 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:12 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:12 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:12 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:12 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/110ee2b3-e557-47ec-ab49-a0ceb329e947 type ext3 (rw,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:12 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:12 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:12 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:12 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:12 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:12 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:27 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:27 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:38 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:38 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:43 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:43 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:18 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:18 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:25 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:25 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:25 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:25 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:25 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:25 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:25 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:25 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:25 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:25 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:25 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:25 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:25 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:25 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:25 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:25 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:25 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:25 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:25 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:25 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:25 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:25 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:25 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:25 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:25 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:25 wdtv user.info kernel: d
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:25 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.notice root: [152e:1640] 1-1( 2.00,480m) SuperMulti RW /001010164000B0185
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: HL-DT-ST Model: DVDRAM GE20NU10 Rev: EE06
Jan 1 00:00:27 wdtv user.notice kernel: Type: CD-ROM ANSI SCSI revision: 00
Jan 1 00:00:27 wdtv user.notice kernel: 1:0:0:0: Attached scsi generic sg1 type 5
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:28 wdtv daemon.info utelnetd[596]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:28 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:28 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:31 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:31 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:32 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:32 wdtv authpriv.info dropbear[709]: Running in background
Jan 1 00:00:37 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.warn kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 1 00:00:37 wdtv user.info kernel: Uniform CD-ROM driver Revision: 3.20
Jan 1 00:00:38 wdtv user.notice root: cd.agent: CDROM hotplugged -
Jan 1 00:00:38 wdtv user.debug kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 1 00:00:38 wdtv user.info kernel: cdrom: open failed.
Jan 1 00:00:38 wdtv user.notice root: cd.agent: cd-manager starting
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:25 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:25 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:25 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:25 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:25 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:25 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:25 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:25 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:25 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:25 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.notice root: [152e:1640] 1-1( 2.00,480m) SuperMulti RW /001010164000B0185
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sda: sda1
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: HL-DT-ST Model: DVDRAM GE20NU10 Rev: EE06
Jan 1 00:00:26 wdtv user.notice kernel: Type: CD-ROM ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: 1:0:0:0: Attached scsi generic sg1 type 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:26 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:26 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:26 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:26 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:26 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:28 wdtv daemon.info utelnetd[596]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:28 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[687]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:37 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.warn kernel: sr0: scsi3-mmc drive: 37x/37x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 1 00:00:37 wdtv user.info kernel: Uniform CD-ROM driver Revision: 3.20
Jan 1 00:00:38 wdtv user.notice root: cd.agent: CDROM hotplugged -
Jan 1 00:00:38 wdtv user.notice root: cd.agent: cd-manager starting
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sda: sda1
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:26 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:26 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:26 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:26 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:26 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:28 wdtv daemon.info utelnetd[568]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:28 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:28 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:31 wdtv authpriv.info dropbear[657]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:32 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:36 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:47 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:47 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:49 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:55 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:55 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv daemon.notice statd[1317]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1317]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:00:58 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:58 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:58 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:58 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:09 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:09 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:16 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:16 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:22 wdtv user.notice root: Now mounted:
Jan 1 00:01:22 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:22 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:22 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:22 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:22 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:22 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:22 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:22 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:22 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:22 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:22 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:22 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:22 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:01:45 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:01:47 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:01:47 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:01:47 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:01:52 wdtv user.notice kernel: Vendor:
Jan 1 00:01:52 wdtv user.info kernel: H
Jan 1 00:01:52 wdtv user.info kernel: L
Jan 1 00:01:52 wdtv user.info kernel: -
Jan 1 00:01:52 wdtv user.info kernel: D
Jan 1 00:01:52 wdtv user.info kernel: T
Jan 1 00:01:52 wdtv user.info kernel: -
Jan 1 00:01:52 wdtv user.info kernel: S
Jan 1 00:01:52 wdtv user.info kernel: T
Jan 1 00:01:52 wdtv user.info kernel: Model:
Jan 1 00:01:52 wdtv user.info kernel: D
Jan 1 00:01:52 wdtv user.info kernel: V
Jan 1 00:01:52 wdtv user.info kernel: D
Jan 1 00:01:52 wdtv user.info kernel: R
Jan 1 00:01:52 wdtv user.info kernel: AM GE20NU10 Rev: EE06
Jan 1 00:01:52 wdtv user.notice kernel: Type: CD-ROM
Jan 1 00:01:52 wdtv user.info kernel: ANSI SCSI revision: 00
Jan 1 00:01:54 wdtv user.warn kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 1 00:01:54 wdtv user.info kernel: Uniform CD-ROM driver Revision: 3.20
Jan 1 00:01:54 wdtv user.debug kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 1 00:01:54 wdtv user.notice kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Jan 1 00:01:54 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:02:12 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:25 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:25 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:25 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:25 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:25 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:25 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:25 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:25 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:25 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:25 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:25 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:25 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:25 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:25 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:25 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:25 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:25 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:25 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:25 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:25 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:25 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:25 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:25 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:25 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:25 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:25 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:25 wdtv user.info kernel: d
Jan 1 00:00:25 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:25 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:25 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:25 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.notice root: [152e:1640] 1-1( 2.00,480m) SuperMulti RW /001010164000B0185
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sda: sda1
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: HL-DT-ST Model: DVDRAM GE20NU10 Rev: EE06
Jan 1 00:00:26 wdtv user.notice kernel: Type: CD-ROM ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: 1:0:0:0: Attached scsi generic sg1 type 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:26 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:26 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:26 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:26 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:26 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:27 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:28 wdtv daemon.info utelnetd[596]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:28 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:28 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:31 wdtv authpriv.info dropbear[687]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:32 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:36 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:36 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:36 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:36 wdtv user.warn kernel: sr0: scsi3-mmc drive: 37x/37x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 1 00:00:36 wdtv user.info kernel: Uniform CD-ROM driver Revision: 3.20
Jan 1 00:00:36 wdtv user.notice root: cd.agent: CDROM hotplugged -

Jan 1 00:00:28 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:28 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:28 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:28 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:30 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:30 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:33 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:33 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv authpriv.info dropbear[750]: Running in background
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:39 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:39 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:39 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:45 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:46 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:50 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:50 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:52 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:52 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:52 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:53 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:53 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:53 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:56 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:56 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:57 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:57 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:58 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:58 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:59 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:59 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:59 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:59 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:01 wdtv daemon.notice statd[1436]: Version 1.1.5 Starting
Jan 1 00:01:01 wdtv daemon.notice statd[1436]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:05 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:05 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:11 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:11 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:11 wdtv user.info kernel: internal journal
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:12 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:12 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:13 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:20 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:20 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:26 wdtv user.notice root: Now mounted:
Jan 1 00:01:26 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:26 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:26 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:26 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:26 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:26 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:26 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:26 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:26 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:26 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:26 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:26 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:26 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:26 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:27 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[707]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" TYPE="ext3"
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:45 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:45 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:50 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:50 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:51 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:51 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:55 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:56 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:56 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:57 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:57 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:01:00 wdtv daemon.notice statd[1405]: Version 1.1.5 Starting
Jan 1 00:01:00 wdtv daemon.notice statd[1405]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:01 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:01:01 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:02 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:02 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:04 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:04 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:11 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:11 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:11 wdtv user.info kernel: internal journal
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:12 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:12 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:12 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:13 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:14 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:15 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:16 wdtv user.notice root: Now mounted:
Jan 1 00:01:16 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:16 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:16 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:16 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:16 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:16 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:16 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:16 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:16 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:16 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:16 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:16 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:16 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:16 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:16 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:16 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:16 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:00:26 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:26 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:31 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:32 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:32 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" TYPE="ext3"
Jan 1 00:00:32 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:33 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:33 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:33 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:34 wdtv authpriv.info dropbear[774]: Running in background
Jan 1 00:00:39 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:39 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:40 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:45 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:45 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:50 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:50 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:51 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:51 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:51 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:52 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:56 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:56 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:56 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:57 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:58 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:01 wdtv daemon.notice statd[1446]: Version 1.1.5 Starting
Jan 1 00:01:01 wdtv daemon.notice statd[1446]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:04 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:04 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:11 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:11 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:11 wdtv user.info kernel: internal journal
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:12 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:12 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:13 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:14 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:20 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:20 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:27 wdtv user.notice root: Now mounted:
Jan 1 00:01:27 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:27 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:27 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:27 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:27 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:27 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:27 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:27 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:27 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:27 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:00:26 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:26 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:27 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:27 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:28 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[711]: Running in background
Jan 1 00:00:33 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:33 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" SEC_TYPE="ext2" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:44 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:44 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:48 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:48 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:49 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:50 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:55 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:55 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:55 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:55 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:56 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:58 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv daemon.notice statd[1366]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1366]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:01:09 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:09 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:09 wdtv user.info kernel: internal journal
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:10 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:11 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:18 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:18 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:24 wdtv user.notice root: Now mounted:
Jan 1 00:01:24 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:24 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:24 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:24 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:24 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:24 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:24 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:24 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:25 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:25 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:25 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:25 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:25 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:25 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:25 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:25 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:26 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:04:39 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:39 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:05:03 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:05:03 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:06:21 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:06:21 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:06:37 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:06:37 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:06:43 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:06:43 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:20 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:20 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:45 wdtv user.info kernel: sdb: Current: sense key=0x0
Jan 1 00:07:45 wdtv user.info kernel: ASC=0x0 ASCQ=0x0
Jan 1 00:07:55 wdtv user.info kernel: usb 1-1: USB disconnect, address 5
Jan 1 00:00:26 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:26 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sdb: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:28 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[630]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[714]: Running in background
Jan 1 00:00:33 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:33 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:37 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:47 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:47 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:49 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:55 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:56 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:56 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:56 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:58 wdtv daemon.notice statd[1400]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1400]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:08 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:01:08 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:08 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:08 wdtv user.info kernel: internal journal
Jan 1 00:01:08 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:08 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:10 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:10 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:10 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:12 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:12 wdtv user.notice root: Now mounted:
Jan 1 00:01:12 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:12 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:12 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:12 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:12 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:12 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:12 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:12 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:12 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:12 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:12 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:12 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:13 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:41 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:41 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:52 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:52 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:56 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:01:56 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:06 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:06 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:06 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:06 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:06 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:06 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:32 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:34 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:34 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:34 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:34 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:34 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:04:34 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:05:42 wdtv user.info kernel: sdb: Current: sense key=0x0
Jan 1 00:05:42 wdtv user.info kernel: ASC=0x0 ASCQ=0x0
Jan 1 00:05:46 wdtv user.info kernel: usb 1-1: USB disconnect, address 5
Jan 1 00:00:26 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:26 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:27 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:27 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:29 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:29 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:29 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:29 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:29 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:29 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:29 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:29 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:29 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:29 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:29 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:29 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:29 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:29 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:30 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:30 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:30 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:30 wdtv user.info kernel: sda: sda1
Jan 1 00:00:30 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:30 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:30 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:30 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:30 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:30 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:31 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:31 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:31 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:31 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:31 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:32 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:32 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:32 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:32 wdtv user.warn kernel: sdb1
Jan 1 00:00:32 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:32 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:32 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:32 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:32 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:32 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:32 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:32 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:32 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:32 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:32 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:32 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:32 wdtv user.info kernel: EXT3 FS on loop0, internal journal
Jan 1 00:00:32 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:32 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:33 wdtv authpriv.info dropbear[702]: Running in background
Jan 1 00:00:34 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:34 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:34 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" TYPE="ext3"
Jan 1 00:00:35 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:35 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:35 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:35 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:47 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:48 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:49 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:50 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:55 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:56 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:56 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:00:56 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:59 wdtv daemon.notice statd[1366]: Version 1.1.5 Starting
Jan 1 00:00:59 wdtv daemon.notice statd[1366]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:01:09 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:09 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:09 wdtv user.info kernel: internal journal
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:11 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:11 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:12 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:12 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:12 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:14 wdtv user.notice root: Now mounted:
Jan 1 00:01:14 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:15 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:15 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:15 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:15 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:15 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:15 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:15 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:15 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:15 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:15 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:15 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:15 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:15 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:15 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:15 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:15 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:15 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:15 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:15 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:15 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:15 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:15 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:15 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:15 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:16 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:54 wdtv authpriv.info dropbear[1625]: Child connection from 192.168.0.3:38961
Jan 1 00:02:20 wdtv authpriv.notice dropbear[1625]: password auth succeeded for 'root' from 192.168.0.3:38961
Jan 1 00:02:20 wdtv authpriv.warn dropbear[1626]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 00:02:20 wdtv authpriv.warn dropbear[1626]: lastlog_openseek: /var/log/lastlog is not a file or directory!
Jan 1 00:02:20 wdtv authpriv.warn dropbear[1626]: wtmp_write: problem writing /var/log/wtmp: No such file or directory
Jan 1 00:04:41 wdtv authpriv.info dropbear[1625]: exit after auth (root): Exited normally
Jan 1 00:23:05 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:23:05 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:23:15 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:23:15 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:23:18 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:23:18 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:23:25 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:23:25 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:23:36 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:23:36 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:23:46 wdtv user.notice kernel: nfs: server 192.168.0.3 not responding, timed out
Jan 1 00:28:07 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:28:09 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:28:53 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:28:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:29:55 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:29:57 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:31:57 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:31:57 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:32:15 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:32:15 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:32:52 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:32:52 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:04 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:04 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:12 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:12 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:28 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:28 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:37 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:37 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:33:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:26 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:26 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:26 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:26 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:26 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:26 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:26 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:26 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:26 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:26 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:26 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:26 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:26 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:26 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:26 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:27 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:27 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:27 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:27 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:27 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:27 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:27 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:27 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:27 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:27 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:27 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:27 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sda: sda1
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:30 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:30 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:30 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:30 wdtv user.info kernel: internal journal
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:30 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[707]: Running in background
Jan 1 00:00:33 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:33 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="5a6a6188-6f08-4727-a16d-647df7b8bac9" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:37 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:47 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:47 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:47 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:49 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:55 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv daemon.notice statd[1378]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1378]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:00:59 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:01:09 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:09 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:09 wdtv user.info kernel: internal journal
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:10 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:11 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:12 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:13 wdtv user.notice root: Now mounted:
Jan 1 00:01:13 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:13 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:13 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:13 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:13 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:13 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:13 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:13 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:13 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:13 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:13 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:13 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:13 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:13 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/5a6a6188-6f08-4727-a16d-647df7b8bac9 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/musica on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:01:13 wdtv user.notice root: 192.168.0.3:/home/filippo/Scrivania/Dvx on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type nfs (rw,v3,rsize=32768,wsize=32768,soft,intr,lock,proto=udp,addr=192.168.0.3)
Jan 1 00:14:39 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:14:40 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:22:08 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:22:10 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 01:23:13 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 01:23:15 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:26 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:26 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:26 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:26 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sda: sda1
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:27 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:27 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:27 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:27 wdtv user.warn kernel: sdb1
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:27 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:28 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:29 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:31 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[706]: Running in background
Jan 1 00:00:33 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:33 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="110ee2b3-e557-47ec-ab49-a0ceb329e947" SEC_TYPE="ext2" TYPE="ext3"
Jan 1 00:00:34 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:37 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:37 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:37 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:43 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:47 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:48 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:49 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:53 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:54 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:55 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:55 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv daemon.notice statd[1380]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1380]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:00:59 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:00:59 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:59 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:02 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:09 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:09 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:09 wdtv user.info kernel: internal journal
Jan 1 00:01:09 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:10 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:10 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:10 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:11 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan 1 00:01:11 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:18 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan 1 00:01:18 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan 1 00:01:24 wdtv user.notice root: Now mounted:
Jan 1 00:01:24 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:01:24 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan 1 00:01:24 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:24 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:24 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan 1 00:01:24 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan 1 00:01:24 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan 1 00:01:24 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: rpc_pipefs on /tmp/nfs/rpc_pipefs type rpc_pipefs (rw)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/110ee2b3-e557-47ec-ab49-a0ceb329e947 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan 1 00:01:24 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan 1 00:02:59 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:02:59 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:05 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:05 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:09 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:09 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:03:35 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:07:42 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan 1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan 1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan 1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan 1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan 1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan 1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan 1 00:00:25 wdtv user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan 1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan 1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan 1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan 1 00:00:25 wdtv user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Jan 1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan 1 00:00:25 wdtv user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Jan 1 00:00:25 wdtv user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan 1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan 1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan 1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan 1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:25 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan 1 00:00:25 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan 1 00:00:25 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan 1 00:00:25 wdtv user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 00:00:25 wdtv user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:25 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan 1 00:00:25 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan 1 00:00:25 wdtv user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan 1 00:00:25 wdtv user.info kernel: usbcore: registered new driver hub
Jan 1 00:00:25 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan 1 00:00:25 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan 1 00:00:25 wdtv user.warn kernel: fuse init (API version 7.3)
Jan 1 00:00:25 wdtv user.info kernel: Initializing Cryptographic API
Jan 1 00:00:25 wdtv user.info kernel: io scheduler noop registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler anticipatory registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler deadline registered
Jan 1 00:00:25 wdtv user.info kernel: io scheduler cfq registered
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan 1 00:00:25 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan 1 00:00:25 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan 1 00:00:25 wdtv user.notice root: Displaying detected USB devices...
Jan 1 00:00:25 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan 1 00:00:25 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan 1 00:00:25 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:25 wdtv user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:25 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:25 wdtv user.notice kernel: number of CFI chips: 1
Jan 1 00:00:25 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:25 wdtv user.notice kernel: Using physmap partition definition
Jan 1 00:00:25 wdtv user.notice kernel: Adding partition #1-#5
Jan 1 00:00:25 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan 1 00:00:25 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan 1 00:00:25 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan 1 00:00:25 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan 1 00:00:25 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan 1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan 1 00:00:26 wdtv user.info kernel: d
Jan 1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan 1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan 1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan 1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan 1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:26 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan 1 00:00:26 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan 1 00:00:26 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan 1 00:00:26 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device found at 5
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:26 wdtv user.notice root: [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Sony Model: Storage Media Rev: 0100
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan 1 00:00:26 wdtv user.notice kernel: sda: Write Protect is off
Jan 1 00:00:26 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan 1 00:00:26 wdtv user.err kernel: sda: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sda: sda1
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 1 00:00:26 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.notice kernel: Vendor: Hitachi Model: HDT721010SLA360 Rev:
Jan 1 00:00:26 wdtv user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:26 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan 1 00:00:26 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan 1 00:00:26 wdtv user.info kernel: sdb:<6>kjournald starting. Commit interval 5 seconds
Jan 1 00:00:26 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:26 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:26 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:26 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan 1 00:00:26 wdtv user.warn kernel: sdb1
Jan 1 00:00:26 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 1 00:00:26 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 1 00:00:26 wdtv user.debug kernel: usb-storage: device scan complete
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan 1 00:00:26 wdtv user.notice root: [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan 1 00:00:26 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan 1 00:00:26 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan 1 00:00:27 wdtv user.notice root: [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan 1 00:00:27 wdtv user.notice root: [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan 1 00:00:28 wdtv user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan 1 00:00:28 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan 1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan 1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan 1 00:00:29 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:00:29 wdtv user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0,
Jan 1 00:00:29 wdtv user.info kernel: internal journal
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan 1 00:00:32 wdtv authpriv.info dropbear[710]: Running in background
Jan 1 00:00:32 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan 1 00:00:32 wdtv user.notice root: Polling detected drives...
Jan 1 00:00:32 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan 1 00:00:33 wdtv user.notice root: /dev/sdb1: UUID="110ee2b3-e557-47ec-ab49-a0ceb329e947" TYPE="ext3"
Jan 1 00:00:33 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan 1 00:00:33 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan 1 00:00:33 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:00:33 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan 1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan 1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:44 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:44 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:48 wdtv user.notice root: net.agent: Called for eth0
Jan 1 00:00:48 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver asix
Jan 1 00:00:48 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov ([email protected])
Jan 1 00:00:48 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan 1 00:00:49 wdtv user.info kernel: usbcore: registered new driver catc
Jan 1 00:00:49 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan 1 00:00:50 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan 1 00:00:50 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver net1080
Jan 1 00:00:50 wdtv user.info kernel: usbcore: registered new driver plusb
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan 1 00:00:51 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.0.10 GW=
Jan 1 00:00:54 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan 1 00:00:54 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan 1 00:00:55 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan 1 00:00:55 wdtv user.notice root: Device eth0 configged as 192.168.0.10//255.255.255.0
Jan 1 00:00:56 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan 1 00:00:56 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:56 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan 1 00:00:58 wdtv daemon.notice statd[1390]: Version 1.1.5 Starting
Jan 1 00:00:58 wdtv daemon.notice statd[1390]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan 1 00:00:59 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/musica Musica2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:00 wdtv user.notice root: xmount: 192.168.0.3:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan 1 00:01:00 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan 1 00:01:03 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan 1 00:01:11 wdtv user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 00:01:11 wdtv user.info kernel: EXT3 FS on sdb1,
Jan 1 00:01:11 wdtv user.info kernel: internal journal
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan 1 00:01:11 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 00:01:12 wdtv user.notice root: xmounter: entering stage2
Jan 1 00:01:13 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan 1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...

Scusate per come ho postato i file cionci puoi darci un occhiata non riesco a far funzionare il mio masterizzatore della lg esterno
Grazie
Non riesce a fare il boot si blocca al caricamento possibile non trovarne uno che vada.....

[peterasr]

Alla prima domanda la risposta è si. Ci sono alcuni limiti che dipendo dall'adattatore e dal tipo di share da cui il WDTV si prende i film.

Se ne hai la possibilità (cioè si riesci a portare un cavo di rete alla TV), ti conviene prendere un adattatore per rj-45. Rispetto a quelli wi-fi sono di gran lunga più facili da configurare e garantiscono prestazioni migliori.

Qua c'è una lista degli adattatori supportati: http://wiki.wdtv.org/doku.php?id=supported_usb_devices
Nella lista non c'è l'Hamlet HNU2GTX, che funziona benissimo e in Italia dovresti riuscire a trovare.
Io ho il D-Link DUB-E100 H/W Version B1. Funziona perfettamente però devi essere sicuro che sia quella versione di hardware (è scritto fuori anche sulla scatola), altrimenti non funziona.
Poi dovresti riuscire a trovare quello della Wii e quello della Apple.

Per gli adattatori Wi-Fi non mi esprimo che non ne ho provato nemmeno uno.

scusate sono nuovo del sito e nn sò come fare ad aprire una nuova discussione....ho acquistato il wd tv stasera e l ho collegato al tv coi 3 cavi bianco giallo rosso....la tv me lo rileva ma appena gli ho collegato l hd esterno da 1.5 tb mi dice ke nn trova niente!!!!premetto ke l hd è formattato in exfat un evoluzione del fat32 e 64....sapete aiutarmi a capire il xkè nn m legge il dispositivo????ha problemi cn la grandezza dell hd 1.5tb oppure col formato exfat????grazie e scusate se ho sbagliato a scrivere qui invece d aprire una nuova discussione.

[prepon]

scusate sono nuovo del sito e nn sò come fare ad aprire una nuova discussione....ho acquistato il wd tv stasera e l ho collegato al tv coi 3 cavi bianco giallo rosso....la tv me lo rileva ma appena gli ho collegato l hd esterno da 1.5 tb mi dice ke nn trova niente!!!!premetto ke l hd è formattato in exfat un evoluzione del fat32 e 64....sapete aiutarmi a capire il xkè nn m legge il dispositivo????ha problemi cn la grandezza dell hd 1.5tb oppure col formato exfat????grazie e scusate se ho sbagliato a scrivere qui invece d aprire una nuova discussione.

prova ad aggiornare il firmware con l'ultima versione, 1.02.07, la trovi sul sito wd
(in prima pagina ci sono tutti i link), basta decompirmere il file su una penna di memoria, metterla in una porta usb del wd, accedendere e aggiornare.

[xterminatorx]

scusate sono nuovo del sito e nn sò come fare ad aprire una nuova discussione....ho acquistato il wd tv stasera e l ho collegato al tv coi 3 cavi bianco giallo rosso....la tv me lo rileva ma appena gli ho collegato l hd esterno da 1.5 tb mi dice ke nn trova niente!!!!premetto ke l hd è formattato in exfat un evoluzione del fat32 e 64....sapete aiutarmi a capire il xkè nn m legge il dispositivo????ha problemi cn la grandezza dell hd 1.5tb oppure col formato exfat????grazie e scusate se ho sbagliato a scrivere qui invece d aprire una nuova discussione.

Secondo me è un problema di file system
non credo che il wdtv supporti anche l'exfat.
Prova formattando l'HD in NTFS

[Diogene7]

Tralasciando il firmware originale, qual'è il firmware migliore? Ne vorrei uno un po' più veloce soprattutto nello scorrere i film, e magari che mi permetta di aumentare leggermente le dimensioni dei caratteri in vista elenco, visto che non ci si legge niente.

Anche a voi, se non staccate l'alimentazione della wd tv, questa rimane calda?

[Parny]

Secondo me è un problema di file system
non credo che il wdtv supporti anche l'exfat.
Prova formattando l'HD in NTFS
Quoto, prova a formattarlo in NTFS o ext3 (devi aggiornare al firmware 1.02.07). L'exfat subito sia supportato...

Tralasciando il firmware originale, qual'è il firmware migliore? Ne vorrei uno un po' più veloce soprattutto nello scorrere i film, e magari che mi permetta di aumentare leggermente le dimensioni dei caratteri in vista elenco, visto che non ci si legge niente.

Anche a voi, se non staccate l'alimentazione della wd tv, questa rimane calda?

Che io sappia nessun firmware velocizza lo scorrere dei menu.
Ext3-boot e WDLXTV sono praticamente identici dal punto di vista visualizzazione al firmware originale (cambia solo lo sfondo di default).

Sono creati per aggiungere funzionalità tipo la connettività di rete e per installare tutti i software del pacchetto optware.

Esiste qualche mod per l'interfaccia (tipo questo (http://translate.google.com/translate?client=tmpg&hl=en&u=http%3A%2F%2Fwdtv-osdmod.blogspot.com%2F2009%2F06%2Ffaq-y-manual-del-wdtv.html&langpair=es|en)), che serve per vedere la trama e le cover etc...
E' basato su questo pacchetto http://sourceforge.net/apps/trac/wdtvtools/wiki/event-osd che volendo puoi usare per creare la tua interfaccia (devi saperci fare però).

Per quanto riguarda il WDTV caldo è normale. Con il telecomando si spengono solo i led e le uscite video (più eventuali dischi collegati), il resto è acceso.

[leoben]

Confermo! Come telecomando è eccezionale!
Per il WD TV non c'è bisogno neppure di farli imparare i comandi.
Con la configurazione di default dal database Logitech funziona che è una meraviglia :D

Ho appena configurato il mio Harmony 555 per il WD TV.
Funziona alla perfezione per guardare i film!
Ho qualche problema invece nell'ascoltare gli mp3. Non mi funziona il tasto per saltare da un brano all'altro... Mentre l'avanzamento veloce va bene...
Hai dovuto configurare qualcosa manualmente?

[Diogene7]

Ok, allora terrò l'originale, visto che non posso velocizzare l'elenco o aumentare le dimensioni dei caratteri.
Dopo che lo spengo col telecomando, stacco sempre anche l'alimentazione, penso che sia meglio, che ne dite?

[Gypsy64]

Salve a tutti. ho letto quasi tutto il lunghissimo treadh riguardante il wd tv. Molto interessante ed ho trovato alcune risposte che cercavo, come, sapere che il calore prodotto dal WD tv anche da spento è normale.
Sono rimasto soddisfatto del prodotto, "dopo l"aggiornamento del firmware ufficiale", ma un poco meno per quanto riguarda la gestione delle fotografie.
Il fatto è che io vivo in Belgio, ed ho la mia famiglia in Roma. A luglio andro a trovarli ed avevo in mente di mostrare loro alcune fotografie (about 2000 fotografie) delle mie vacanze lavoro etc.
Il punto è che sono rimasto deluso dalla lentezza dell'apparecchio nel mostarre le fotografie in televisione.
al WD tv è collegato un hd WD 250 Mb, il Wd tv é collegato al televisore tramite hdmi; ed il tv è un 40" hd ready.

Ho fatto alcune prove con fotografie a diverse risoluzioni, scalandole fino a 1024 x XXXX pensando che fossero troppo pesanti per il WD tv; ma ottenendo nessun risultato positivo.

La mia domanda da ignorante in materia è : possibile che un chip che maneggia superbamente diversi codec audio video, proiettando film con una freguenza di 25 frame al secondo (credo) , sia cosi lento nella transizione da una foto all'altra ?
per lentezza, intendo il tempo di uno o due secondi.
nel setup ho impostato l'effetto transizione su NORMALE, ma non trovo altri parametri da regolare inerenti il tema fotografie.

Quindi chiedo a voi espaerti; devo rassegnarmi alla lentezza, o esiste qualche rimedio per avere uno step tra una foto e l'altra come si ha normalmente con un computer ?
grazie anticipatamente per qualsiasi risposta.

vi leggo molto volentieri e complimenti per questo sito.

[leoben]

Quindi chiedo a voi espaerti; devo rassegnarmi alla lentezza, o esiste qualche rimedio per avere uno step tra una foto e l'altra come si ha normalmente con un computer ?
grazie anticipatamente per qualsiasi risposta.

vi leggo molto volentieri e complimenti per questo sito.

Non ho mai usato il wd tv per vedere le foto.
Però ho visto che tra le impostazioni c'è pure da impostare l'intervallo (credo sia appunto il tempo fra una foto e l'altra) il cui valore minimo però è 3 secondi...

[peterasr]

Secondo me è un problema di file system
non credo che il wdtv supporti anche l'exfat.
Prova formattando l'HD in NTFS

grazie ho formattato l hd in ntfs e adesso và bene....xrò ho rilevato una cosa strana!!!!sia nei video,nelle foto e nella musica mi dà tutti i file doppi mentre io sull hd ce li ho singoli....esempio se ho 4500 brani nell hd sul wd tv me ne rileva 9000 e cosi x foto o video!!!!da cosa può dipendere????comunque ora vado a comprare un cavo hdmi e faccio pure l aggiornamento a 1.02 sperando ke migliori!!!!!ciao e grazie x l aiuto.

[Peronz]

Ho qualche problema invece nell'ascoltare gli mp3. Non mi funziona il tasto per saltare da un brano all'altro... Mentre l'avanzamento veloce va bene...
Hai dovuto configurare qualcosa manualmente?
Io devo ancora ascoltare gli mp3 con la WD TV.
Proverò anch'io e vediamo cosa succede

[Parny]

grazie ho formattato l hd in ntfs e adesso và bene....xrò ho rilevato una cosa strana!!!!sia nei video,nelle foto e nella musica mi dà tutti i file doppi mentre io sull hd ce li ho singoli....esempio se ho 4500 brani nell hd sul wd tv me ne rileva 9000 e cosi x foto o video!!!!da cosa può dipendere????comunque ora vado a comprare un cavo hdmi e faccio pure l aggiornamento a 1.02 sperando ke migliori!!!!!ciao e grazie x l aiuto.

Ma entrambi i file vengono riprodotti/visualizzati correttamente?

[peterasr]

si vengono visualizzati correttamente anke se m pare ke nelle foto uno sia + grande dell altro se nn sbaglio!!!!poi ho notato ke alcuni video anke se originalmente li ho ognuno cn la sua cartella dentro al wd tv me li mette sparsi vob.1, vob 2. etc etc e in alcuni vob l audio nn si sente????sai dirmi perchè e cosa posso fare????grazie....

[Parny]

Ogni film ha più di un file video separato perchè struttura dei DVD video è così.
Ti conviene lasciare le immagini iso così hai un singolo file (i menu non vengono letti però).

Per quanto riguarda l'audio che non si sente, probabilmente è compresso in qualche formato che non è supportato dal WDTV (DTS ad esempio).

[peterasr]

Ogni film ha più di un file video separato perchè struttura dei DVD video è così.
Ti conviene lasciare le immagini iso così hai un singolo file (i menu non vengono letti però).

Per quanto riguarda l'audio che non si sente, probabilmente è compresso in qualche formato che non è supportato dal WDTV (DTS ad esempio).

ho capito ma c è un modo x farlo sentire l audio????magari riconvertendo il dvd in qualke altro formato????

[Diogene7]

Vorrei mettere il firmware indicato da alcuni: Wdlxtv http://www.wdtvc.com/2009/05/13/wdlxtv-version-0532-available/

Che ne pensate? devo stare attento a qualcosa in particolare visto che è originale?

[Parny]

ho capito ma c è un modo x farlo sentire l audio????magari riconvertendo il dvd in qualke altro formato????

Per i dvd così non ho idea di cosa potresti usare.
Ma non hai provato a cambiare l'audio durante la riproduzione del video? Magari c'è anche una traccia che si sente...

[cionci]

E' stato rilasciato il firmware beta 1.02.10 ;) Nessuna grossa novità, almeno per noi.

[Radical]

E' stato rilasciato il firmware beta 1.02.10 ;) Nessuna grossa novità, almeno per noi.

Cioè?

[peterasr]

Per i dvd così non ho idea di cosa potresti usare.
Ma non hai provato a cambiare l'audio durante la riproduzione del video? Magari c'è anche una traccia che si sente...

se premo il tasto opzioni m rivela solo audio 1 almeno ke nn devo premerlo velocemente + di una volta x evidenziare altri audio????

[angelorc]

E' stato rilasciato il firmware beta 1.02.10 ;) Nessuna grossa novità, almeno per noi.

ciao cionci mi cosigli di provarlo riguardo al fatto che non mi faceva spegnere gli HD? (ho provato oltre che con il mio LaCie, anche con un Maxtor e rimangono acesi sia le lucine che i piatti) grazie, ciao.

[iaio]

scusate una domanda ma questo WD fà pure l'upscaling dei dvd?

[cionci]

ciao cionci mi cosigli di provarlo riguardo al fatto che non mi faceva spegnere gli HD? (ho provato oltre che con il mio LaCie, anche con un Maxtor e rimangono acesi sia le lucine che i piatti) grazie, ciao.
Guarda la lista degli aggiornamenti che trovi insieme al file del firmware ;)

[cionci]

scusate una domanda ma questo WD fà pure l'upscaling dei dvd?
Sì, la risoluzione è fissa, quindi fa l'upscaling o il downscaling a seconda della dimensione del filmato.