|
|
|
![]() |
|
Strumenti |
![]() |
#1 |
Senior Member
Iscritto dal: Mar 2005
Città: Bresa (Lago di Garda)
Messaggi: 1885
|
aiuto per tablet pc tc1000
Ho acquistato sul forum questo tablet, e volevo alcune informazioni in quanto credo di avere fatto una cavolata.
Il tablet funzionava ma lo volevo riportarlo come mamma l'ha fatto. Oltre alle istruzioni ci sono i cd di ripristino, disco 1-2-3 in Inglese e 1-2 in francese e tedesco (non so perchè 3 e 2, ma è lo stesso). In tutti i cd ci sono cartelle una restore e l'altra tools. Ho preso un cdrom usb e messo il primo cd, settato da bios l'ordine di boot, e qui accade che il computer legge da cd ma si ferma sulla scritta failed to load usb storage. Mi chiedo se questa è la procrdura corretta per il ripristimo? Preso dallo sconforto un amico è stato a casa mia con il suo windows xp tablet (il suo tablet ha il cd originale ed i driver e non il ripristino) per vedere che succede. Be abbiamo caricato xp tablet partendo da cd senza problemi (per cui il cd rom usb va bene), ma chiaramente non ho i driver (che dovrei nel caso cercarli) ma soprattutto l'ho disinstalalto in quanto non ho la licenza. Cosa potrei fare? Ne mio tablet non c'è l'adesivo con il n di licenza da poter inserire devo usare prorpio i cd di ripristino che non vannp Un aiutino? Grazie |
![]() |
![]() |
![]() |
#2 |
Senior Member
Iscritto dal: Mar 2005
Città: Bresa (Lago di Garda)
Messaggi: 1885
|
strano
la cosa strana è che se metto il cd1 restore nel mio pc fisso, con boot da cd mi entra nel restore, se lo faccio con il cd usb del portatile non entra nel restore ma si inchioda enta nel setup di windows solo nel modo detto sopra ovvero con un cd di xp tablet
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Iscritto dal: Mar 2005
Città: Bresa (Lago di Garda)
Messaggi: 1885
|
un aiuto?
Ho trovato questo in inglese , mi confermate che la procedura che ho seguito è corretta? ( ma non funziona)
Ho creato sull hd del tc1000 una partizione in fat 32, ho creato una cartella restore e copiato e 3 factory (dei 3 cd) e un tools che si trova in uno dei tre cd. Ho creato un cd di boot (non ho un floppy usb) e messo al promt dei comandi C:\TOOLS\PQIMGMB.EXE /CMD=C:\TOOLS\QRESTORE.SCR /IMG=C:\RESTORE\FACTORY.PQI /NRB /ESF=C:\TOOLS\ENSTR.TXT Con "c" chè è lhd fat32. Be vendono numerini strani ma nulla non va Grazie This may not help and may be too technical, but when I owned a TC1000 3 years ago, I always used to restore by copying the contents of the 3 Cds onto a FAT32 partition on the hard drive and booting the TC1000 into DOS using a USB floppy drive and initiating the restore from there. If you're interested, according to some notes I still have, I used the following procedure: Create a FAT32 partition at the end of the hard drive big enough for the contents of the 3 CDs. If you have a working XP installation on the TC1000 you can use Partition Magic or similar - if not you can temporarily remove the hard drive from the TC1000, place it in a USB adapter and use another PC to do this. Copy the folder RESTORE from the 1st CD to the partition and then copy contents of the RESTORE folders from the other 2 CDs to the same RESTORE folder on the partition, also copy the TOOLS folder from any of the CDs to the partition (each CD contains the TOOLS folder - they are identical). On the FAT32 partiton you should now have 2 folders: RESTORE and TOOLS. The RESTORE folder should contain 3 image files: FACTORY.PQI, FACTORY.002, FACTORY.003. Boot into dos and type (or create a batch file!) : C:\TOOLS\PQIMGMB.EXE /CMD=C:\TOOLS\QRESTORE.SCR /IMG=C:\RESTORE\FACTORY.PQI /NRB /ESF=C:\TOOLS\ENSTR.TXT It takes about 4 minutes for the image to copy over to the hard drive, after rebooting, it takes around another 4 minutes for XP to sort itself out. It's a much faster process than using the 3 Cds and a CD drive. There are various ways for booting into DOS including making the FAT32 partition itself bootable - but using an external device such as a USB floppy, CD or memory stick is easier. If you want to keep the FAT 32 partition for future restores (or maybe you have to do this anyway? -I forget) - you'll have to modify the QRESTORE.SCR file - simply open it up with notepad or similar to do this. The original file reads: SELECT DRIVE 1 DELETE ALL SELECT FREESPACE FIRST SELECT IMAGE 1 RESTORE SELECT PARTITION 1 SET ACTIVE modify this to: SELECT DRIVE 1 SELECT PARTITION 1 SELECT IMAGE 1 RESTORE SELECT PARTITION 1 SET ACTIVE As Rob says, it would probably be easier just to buy the HP branded CD drive or perhaps use a XP Tablet CD (or make one) - as most USB CD drives will boot from a XP CD - but don't like the TC1000 restore CDs. |
![]() |
![]() |
![]() |
Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 03:29.