Blocco di Fedora 4 lanciando in esecuzione Eclipse

[natasha]

Buonasera a tutti,
ho installato Fedora Core 4 su VMware Workstation 5.0, e tutto sembra funzionare, ma quando lancio in esecuzione Eclipse, arrivati alla schermata di scelta (tutorial, esempi ecc.), Fedora Core 4 si blocca, senza che sia possibile sbloccarlo nemmeno con CTRL+ALT+INS (che sarebbe CTRL+ALT+CANC inviato alla macchina virtuale).
Qualche suggerimento?
Kisses,

Nat

P.S. Qualcuno ha l'URL del forum ufficiale di Fedora?

[kingv]

per "si blocca" intendi proprio un freeze del sistema operativo?

quando riavvii guarda (e posta) il contenuto di /var/log/messages prima del blocco

[natasha]

Sì, intendo proprio un freeze.
Adesso non sono nelle vicinanze della workstation, sarà mia premura postare il contenuto quanto prima.

[AleLinuxBSD]

Originariamente inviato da natasha

Qualcuno ha l'URL del forum ufficiale di Fedora?

Ciao Natasha!
Eccoti dei link:
http://www.fedoraforum.org : in inglese
http://www.fedoraonline.it : in italiano
http://www.fedoraitalia.org : in italiano
Spero ti siano d'aiuto.

Baci Ale

[natasha]

Originariamente inviato da kingv

per "si blocca" intendi proprio un freeze del sistema operativo?

quando riavvii guarda (e posta) il contenuto di /var/log/messages prima del blocco

ciao kingv,
questo è il contenuto di /var/log/messages dall'avvio fino ad immediatamente prima del blocco:

Dec 14 18:55:56 localhost syslogd 1.4.1: restart.
Dec 14 18:55:56 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Dec 14 18:55:56 localhost kernel: Linux version 2.6.11-1.1369_FC4 (bhcompile@decompose.build.redhat.com) (gcc version 4.0.0 20050525 (Red Hat 4.0.0-9)) #1 Thu Jun 2 22:55:56 EDT 2005
Dec 14 18:55:56 localhost kernel: BIOS-provided physical RAM map:
Dec 14 18:55:56 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 000000001fef0000 - 000000001fefc000 (ACPI data)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 000000001fefc000 - 000000001ff00000 (ACPI NVS)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 000000001ff00000 - 0000000020000000 (usable)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Dec 14 18:55:56 localhost kernel: BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
Dec 14 18:55:56 localhost kernel: 0MB HIGHMEM available.
Dec 14 18:55:56 localhost kernel: 512MB LOWMEM available.
Dec 14 18:55:56 localhost kernel: Using x86 segment limits to approximate NX protection
Dec 14 18:55:56 localhost kernel: DMI present.
Dec 14 18:55:56 localhost kernel: ACPI: PM-Timer IO Port: 0x1008
Dec 14 18:55:56 localhost kernel: Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Dec 14 18:55:56 localhost kernel: Built 1 zonelists
Dec 14 18:55:56 localhost kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Dec 14 18:55:56 localhost kernel: Initializing CPU#0
Dec 14 18:55:56 localhost kernel: CPU 0 irqstacks, hard=c0457000 soft=c0456000
Dec 14 18:55:56 localhost kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Dec 14 18:55:56 localhost kernel: Detected 1860.585 MHz processor.
Dec 14 18:55:56 localhost kernel: Using pmtmr for high-res timesource
Dec 14 18:55:56 localhost kernel: Console: colour VGA+ 80x25
Dec 14 18:55:56 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Dec 14 18:55:56 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 14 18:55:56 localhost kernel: Memory: 513196k/524288k available (2518k kernel code, 10508k reserved, 690k data, 180k init, 0k highmem)
Dec 14 18:55:56 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dec 14 18:55:56 localhost kernel: Security Framework v1.0.0 initialized
Dec 14 18:55:56 localhost kernel: SELinux: Initializing.
Dec 14 18:55:56 localhost kernel: SELinux: Starting in permissive mode
Dec 14 18:55:56 localhost kernel: selinux_register_security: Registering secondary module capability
Dec 14 18:55:56 localhost kernel: Capability LSM initialized as secondary
Dec 14 18:55:56 localhost kernel: Mount-cache hash table entries: 512
Dec 14 18:55:56 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 14 18:55:56 localhost kernel: CPU: L2 cache: 2048K
Dec 14 18:55:56 localhost kernel: Intel machine check architecture supported.
Dec 14 18:55:56 localhost kernel: Intel machine check reporting enabled on CPU#0.
Dec 14 18:55:56 localhost kernel: CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Dec 14 18:55:56 localhost kernel: Enabling fast FPU save and restore... done.
Dec 14 18:55:56 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Dec 14 18:55:56 localhost kernel: Checking 'hlt' instruction... OK.
Dec 14 18:55:56 localhost kernel: ACPI: setting ELCR to 0200 (from 0e00)
Dec 14 18:55:56 localhost kernel: checking if image is initramfs... it is
Dec 14 18:55:56 localhost kernel: Freeing initrd memory: 1780k freed
Dec 14 18:55:56 localhost kernel: softlockup thread 0 started up.
Dec 14 18:55:56 localhost kernel: NET: Registered protocol family 16
Dec 14 18:55:56 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
Dec 14 18:55:56 localhost kernel: PCI: Using configuration type 1
Dec 14 18:55:56 localhost kernel: mtrr: v2.0 (20020519)
Dec 14 18:55:56 localhost kernel: ACPI: Subsystem revision 20050309
Dec 14 18:55:56 localhost kernel: ACPI: Interpreter enabled
Dec 14 18:55:56 localhost kernel: ACPI: Using PIC for interrupt routing
Dec 14 18:55:56 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Dec 14 18:55:56 localhost kernel: PCI: Probing PCI hardware (bus 00)
Dec 14 18:55:56 localhost rpc.statd[1903]: Version 1.0.7 Starting
Dec 14 18:55:56 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
Dec 14 18:55:56 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
Dec 14 18:55:56 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
Dec 14 18:55:56 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
Dec 14 18:55:56 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Dec 14 18:55:56 localhost kernel: pnp: PnP ACPI init
Dec 14 18:55:56 localhost kernel: pnp: PnP ACPI: found 12 devices
Dec 14 18:55:56 localhost kernel: usbcore: registered new driver usbfs
Dec 14 18:55:56 localhost kernel: usbcore: registered new driver hub
Dec 14 18:55:56 localhost kernel: PCI: Using ACPI for IRQ routing
Dec 14 18:55:56 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Dec 14 18:55:56 localhost kernel: PCI: Cannot allocate resource region 4 of device 0000:00:07.1
Dec 14 18:55:56 localhost kernel: Simple Boot Flag at 0x36 set to 0x1
Dec 14 18:55:56 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Dec 14 18:55:56 localhost kernel: apm: overridden by ACPI.
Dec 14 18:55:56 localhost kernel: audit: initializing netlink socket (disabled)
Dec 14 18:55:56 localhost kernel: audit(1134586509.024:1): initialized
Dec 14 18:55:56 localhost kernel: Total HugeTLB memory allocated, 0
Dec 14 18:55:56 localhost kernel: VFS: Disk quotas dquot_6.5.1
Dec 14 18:55:56 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dec 14 18:55:56 localhost kernel: SELinux: Registering netfilter hooks
Dec 14 18:55:56 localhost kernel: Initializing Cryptographic API
Dec 14 18:55:56 localhost kernel: ksign: Installing public key data
Dec 14 18:55:56 localhost kernel: Loading keyring
Dec 14 18:55:57 localhost kernel: - Added public key 42BD35A990375F72
Dec 14 18:55:57 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Dec 14 18:55:57 localhost kernel: Limiting direct PCI/PCI transfers.
Dec 14 18:55:57 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Dec 14 18:55:57 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Dec 14 18:55:57 localhost kernel: isapnp: Scanning for PnP cards...
Dec 14 18:55:57 localhost kernel: isapnp: No Plug & Play device found
Dec 14 18:55:57 localhost kernel: Real Time Clock Driver v1.12
Dec 14 18:55:57 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Dec 14 18:55:57 localhost kernel: agpgart: Detected an Intel 440BX Chipset.
Dec 14 18:55:57 localhost kernel: agpgart: AGP aperture is 64M @ 0xe8000000
Dec 14 18:55:57 localhost kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
Dec 14 18:55:57 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 14 18:55:57 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 14 18:55:57 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
Dec 14 18:55:57 localhost auditd[1917]: Init complete, audit pid set to: 1917
Dec 14 18:55:57 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 14 18:55:57 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Dec 14 18:55:57 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 14 18:55:57 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Dec 14 18:55:57 localhost kernel: io scheduler noop registered
Dec 14 18:55:57 localhost kernel: io scheduler anticipatory registered
Dec 14 18:55:57 localhost kernel: io scheduler deadline registered
Dec 14 18:55:57 localhost kernel: io scheduler cfq registered
Dec 14 18:55:57 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Dec 14 18:55:57 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Dec 14 18:55:57 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Dec 14 18:55:57 localhost kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1
Dec 14 18:55:57 localhost kernel: PIIX4: chipset revision 1
Dec 14 18:55:57 localhost kernel: PIIX4: not 100% native mode: will probe irqs later
Dec 14 18:55:57 localhost kernel: ide1: BM-DMA at 0x1478-0x147f, BIOS settings: hdcMA, hddio
Dec 14 18:55:57 localhost kernel: hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
Dec 14 18:55:57 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 14 18:55:57 localhost kernel: hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Dec 14 18:55:57 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Dec 14 18:55:57 localhost kernel: ide-floppy driver 0.99.newide
Dec 14 18:55:57 localhost kernel: usbcore: registered new driver hiddev
Dec 14 18:55:57 localhost kernel: usbcore: registered new driver usbhid
Dec 14 18:55:57 localhost kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Dec 14 18:55:57 localhost kernel: mice: PS/2 mouse device common for all mice
Dec 14 18:55:58 localhost kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Dec 14 18:55:58 localhost kernel: NET: Registered protocol family 2
Dec 14 18:55:58 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Dec 14 18:55:58 localhost kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Dec 14 18:55:58 localhost kernel: IP: routing cache hash table of 1024 buckets, 32Kbytes
Dec 14 18:55:58 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 14 18:55:58 localhost kernel: TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
Dec 14 18:55:58 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Dec 14 18:55:58 localhost kernel: Initializing IPsec netlink socket
Dec 14 18:55:58 localhost kernel: NET: Registered protocol family 1
Dec 14 18:55:58 localhost kernel: NET: Registered protocol family 17
Dec 14 18:55:58 localhost kernel: ACPI wakeup devices:
Dec 14 18:55:58 localhost kernel: USB
Dec 14 18:55:58 localhost kernel: ACPI: (supports S0 S1 S5)
Dec 14 18:55:58 localhost kernel: Freeing unused kernel memory: 180k freed
Dec 14 18:55:58 localhost kernel: SCSI subsystem initialized
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Dec 14 18:55:58 localhost kernel: PCI: setting IRQ 11 as level-triggered
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Dec 14 18:55:58 localhost kernel: scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
Dec 14 18:55:58 localhost kernel: scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
Dec 14 18:55:58 localhost kernel: scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
Dec 14 18:55:58 localhost kernel: scsi0: Firmware Version: 5.07B, I/O Address: 0x1440, IRQ Channel: 11/Level
Dec 14 18:55:58 localhost kernel: scsi0: PCI Bus: 0, Device: 16, Address: 0xEC800000, Host Adapter SCSI ID: 7
Dec 14 18:55:58 localhost kernel: scsi0: Parity Checking: Enabled, Extended Translation: Enabled
Dec 14 18:55:58 localhost kernel: scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
Dec 14 18:55:58 localhost kernel: scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Dec 14 18:55:58 localhost kernel: scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
Dec 14 18:55:58 localhost kernel: scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
Dec 14 18:55:58 localhost kernel: scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Dec 14 18:55:58 localhost kernel: scsi0: *** BusLogic BT-958 Initialized Successfully ***
Dec 14 18:55:58 localhost kernel: scsi0 : BusLogic BT-958
Dec 14 18:55:58 localhost kernel: Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Dec 14 18:55:58 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Dec 14 18:55:58 localhost kernel: SCSI device sda: 13631488 512-byte hdwr sectors (6979 MB)
Dec 14 18:55:58 localhost kernel: sda: asking for cache data failed
Dec 14 18:55:58 localhost kernel: sda: assuming drive cache: write through
Dec 14 18:55:58 localhost kernel: SCSI device sda: 13631488 512-byte hdwr sectors (6979 MB)
Dec 14 18:55:58 localhost kernel: sda: asking for cache data failed
Dec 14 18:55:58 localhost kernel: sda: assuming drive cache: write through
Dec 14 18:55:58 localhost kernel: sda: sda1 sda2
Dec 14 18:55:58 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Dec 14 18:55:58 localhost kernel: device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Dec 14 18:55:58 localhost kernel: scsi0: Tagged Queuing now active for Target 0
Dec 14 18:55:58 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Dec 14 18:55:58 localhost kernel: EXT3-fs: write access will be enabled during recovery.
Dec 14 18:55:58 localhost kernel: cfq: depth 4 reached, tagging now on
Dec 14 18:55:58 localhost kernel: scsi0: Allocated 7 additional CCBs (total now 35)
Dec 14 18:55:58 localhost kernel: kjournald starting. Commit interval 5 seconds
Dec 14 18:55:58 localhost kernel: EXT3-fs: recovery complete.
Dec 14 18:55:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 14 18:55:58 localhost kernel: security: 3 users, 6 roles, 764 types, 87 bools
Dec 14 18:55:58 localhost kernel: security: 55 classes, 180131 rules
Dec 14 18:55:58 localhost kernel: SELinux: Completing initialization.
Dec 14 18:55:58 localhost kernel: SELinux: Setting up existing superblocks.
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev dm-0, type ext3), uses xattr
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev devpts, type devpts), uses transition SIDs
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev proc, type proc), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: Floppy drive(s): fd0 is 1.44M
Dec 14 18:55:58 localhost kernel: FDC 0 is a post-1991 82077
Dec 14 18:55:58 localhost kernel: pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Dec 14 18:55:58 localhost kernel: PCI: setting IRQ 10 as level-triggered
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Dec 14 18:55:58 localhost kernel: pcnet32: PCnet/PCI II 79C970A at 0x1080, 00 0c 29 75 f1 1f assigned IRQ 10.
Dec 14 18:55:58 localhost kernel: eth0: registered as PCnet/PCI II 79C970A
Dec 14 18:55:58 localhost kernel: pcnet32: 1 cards_found.
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Dec 14 18:55:58 localhost kernel: PCI: setting IRQ 9 as level-triggered
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Dec 14 18:55:58 localhost kernel: piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Dec 14 18:55:58 localhost kernel: piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
Dec 14 18:55:58 localhost kernel: shpchp: shpc_init : shpc_cap_offset == 0
Dec 14 18:55:58 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Dec 14 18:55:58 localhost kernel: USB Universal Host Controller Interface driver v2.2
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Dec 14 18:55:58 localhost kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
Dec 14 18:55:58 localhost kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Dec 14 18:55:58 localhost kernel: uhci_hcd 0000:00:07.2: irq 9, io base 0x00001060
Dec 14 18:55:58 localhost kernel: hub 1-0:1.0: USB hub found
Dec 14 18:55:58 localhost kernel: hub 1-0:1.0: 2 ports detected
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: NET: Registered protocol family 10
Dec 14 18:55:58 localhost kernel: Disabled Privacy Extensions on device c03e6820(lo)
Dec 14 18:55:58 localhost kernel: IPv6 over IPv4 tunneling driver
Dec 14 18:55:58 localhost kernel: mtrr: your processor doesn't support write-combining
Dec 14 18:55:58 localhost kernel: ACPI: Power Button (FF) [PWRF]
Dec 14 18:55:58 localhost kernel: ibm_acpi: ec object not found
Dec 14 18:55:58 localhost kernel: md: Autodetecting RAID arrays.
Dec 14 18:55:58 localhost kernel: md: autorun ...
Dec 14 18:55:58 localhost kernel: md: ... autorun DONE.
Dec 14 18:55:58 localhost kernel: audit(1134582947.196:2): avc: denied { write } for pid=1446 comm="fsck" name=rhgb-console dev=ramfs ino=4944 scontext=system_u:system_r:fsadm_t tcontext=system_u:object_r:ramfs_t tclass=fifo_file
Dec 14 18:55:58 localhost kernel: EXT3 FS on dm-0, internal journal
Dec 14 18:55:58 localhost kernel: kjournald starting. Commit interval 5 seconds
Dec 14 18:55:58 localhost kernel: EXT3 FS on sda1, internal journal
Dec 14 18:55:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev sda1, type ext3), uses xattr
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Dec 14 18:55:58 localhost kernel: Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Dec 14 18:55:58 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team
Dec 14 18:55:58 localhost kernel: ip_conntrack version 2.1 (4096 buckets, 32768 max) - 272 bytes per conntrack
Dec 14 18:55:58 localhost kernel: SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Dec 14 18:55:59 localhost hcid[1958]: Bluetooth HCI daemon
Dec 14 18:55:59 localhost kernel: Bluetooth: Core ver 2.7
Dec 14 18:55:59 localhost kernel: NET: Registered protocol family 31
Dec 14 18:55:59 localhost kernel: Bluetooth: HCI device and connection manager initialized
Dec 14 18:55:59 localhost kernel: Bluetooth: HCI socket layer initialized
Dec 14 18:55:59 localhost kernel: Bluetooth: L2CAP ver 2.7
Dec 14 18:55:59 localhost kernel: Bluetooth: L2CAP socket layer initialized
Dec 14 18:55:59 localhost sdpd[1964]: Bluetooth SDP daemon
Dec 14 18:55:59 localhost kernel: Bluetooth: RFCOMM ver 1.5
Dec 14 18:55:59 localhost kernel: Bluetooth: RFCOMM socket layer initialized
Dec 14 18:55:59 localhost kernel: Bluetooth: RFCOMM TTY layer initialized
Dec 14 18:55:59 localhost hcid[1958]: Unable to get on D-BUS
Dec 14 18:56:00 localhost kernel: SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Dec 14 18:56:00 localhost kernel: SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Dec 14 18:56:03 localhost kernel: parport: PnPBIOS parport detected.
Dec 14 18:56:03 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Dec 14 18:56:03 localhost kernel: lp0: using parport0 (interrupt-driven).
Dec 14 18:56:03 localhost kernel: lp0: console ready
Dec 14 18:56:05 localhost xinetd[2270]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Dec 14 18:56:05 localhost xinetd[2270]: Started working: 0 available services
Dec 14 18:56:05 localhost gpm[2302]: *** info [startup.c(95)]:
Dec 14 18:56:05 localhost gpm[2302]: Started gpm successfully. Entered daemon mode.
Dec 14 18:56:05 localhost gpm[2302]: *** info [mice.c(1766)]:
Dec 14 18:56:05 localhost gpm[2302]: imps2: Auto-detected intellimouse PS/2
Dec 14 18:56:08 localhost fstab-sync[2379]: removed all generated mount points
Dec 14 18:56:09 localhost fstab-sync[2388]: added mount point /media/floppy for /dev/fd0
Dec 14 18:56:09 localhost fstab-sync[2391]: added mount point /media/cdrecorder for /dev/hdc
Dec 14 18:56:18 localhost kernel: mtrr: your processor doesn't support write-combining
Dec 14 18:56:29 localhost gdm(pam_unix)[2619]: session opened for user root by (uid=0)
Dec 14 18:56:30 localhost gconfd (root-2718): Inizializzazione (versione 2.10.0), pid 2718, utente 'root'
Dec 14 18:56:30 localhost gconfd (root-2718): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una fonte di configurazione in sola lettura in posizione 0
Dec 14 18:56:30 localhost gconfd (root-2718): L'indirizzo "xml:readwrite:/root/.gconf" è stato risolto ad una fonte di configurazione scrivibile in posizione 1
Dec 14 18:56:30 localhost gconfd (root-2718): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 2
Dec 14 18:56:37 localhost gconfd (root-2718): L'indirizzo "xml:readwrite:/root/.gconf" è stato risolto ad una fonte di configurazione scrivibile in posizione 0

Spero sia d'aiuto....

Nat

[kingv]

non vedo nessun indizio.

io però proprio su fedora core 4 (che installa dall'inizio una jvm) non sono riuscito ad usare eclipse fino a che non ho installato la jvm scaricata da Sun (1.4.2) e non ho utilizzato quella per far girare Eclipse.

se hai 10 minuti fai la prova di scaricarla e installarla in una directory (non rimuovere quella di fedora) e prova a eseguire eclipse anteponendo nel path la nuova jvm.

[natasha]

Originariamente inviato da kingv

se hai 10 minuti fai la prova di scaricarla e installarla in una directory (non rimuovere quella di fedora) e prova a eseguire eclipse anteponendo nel path la nuova jvm.

Ho scaricato la JVM, ma ho poca pratica con Linux a riga di comando, come si fa ad anteporre la nuova JVM nel path?

[natasha]

ti chiedo scusa, un'altra domanda: Fedora Core 4 non riconosce automaticamente la mia chiave USB. Qual è il comando da terminale per effettuarne il mount/umount?

[kingv]

Originariamente inviato da natasha

Ho scaricato la JVM, ma ho poca pratica con Linux a riga di comando, come si fa ad anteporre la nuova JVM nel path?

mettiamo che tu l'abbia installata in /opt/j2sdk1.4.2


da console:
>export PATH=/opt/j2sdk1.4.2/bin:$PATH
ora se digiti:
>java -version
dovresti vedere la jvm che hai appena installato.
poi lancia eclipse sempre da riga comando con qualcosa del tipo:
>/opt/eclipse/eclipse

e vedi se era quello il problema.

[kingv]

Originariamente inviato da natasha

ti chiedo scusa, un'altra domanda: Fedora Core 4 non riconosce automaticamente la mia chiave USB. Qual è il comando da terminale per effettuarne il mount/umount?

>mount -t vfat (o altro filesystem) dispositivo /mount_point

dove dispositivo se non hai dischi scsi sulla macchina generalmente è /dev/sda1

>umount /mount_point

per smontarlo

[natasha]

Originariamente inviato da kingv

dove dispositivo se non hai dischi scsi sulla macchina generalmente è /dev/sda1

purtroppo sulla mia macchina /dev/sda1 è già occupato (/boot).
Comunque, ho provato con un'altra chiave, e la riconosce in automatico: problema della mia (forse una chiave da 1Gb non arriva a riconoscerla).

Ad ogni buon conto, ho un altro problema.
Quando lancio l'rpm con il buon vecchio

rpm -i jdk.......rpm,

mi dice che la JVM in questione è già installata.
Esisterà sicuramente uno switch per installare in un'altra directory, ma quale?

[kingv]

per curiosità dai un
>rpm -qa |grep -i j*dk

per vedere che package del jdk hai installato



per l'rpm esiste maniera di rilocare i file del package ma in questo caso sarebbe un po' un casino, è meglio se scarichi il "bin" che si scompatta nella directory in cui lo esegui.

[natasha]

Originariamente inviato da kingv

per curiosità dai un
>rpm -qa |grep -i j*dk

per vedere che package del jdk hai installato

per l'rpm esiste maniera di rilocare i file del package ma in questo caso sarebbe un po' un casino, è meglio se scarichi il "bin" che si scompatta nella directory in cui lo esegui.

Ho installata l'ultima versione, la 1.5.0 Update 6, che è anche quella che ho scaricato da java.sun.com.
Ho scaricato, per l'appunto, il bin; da terminale, nella directory in cui ho copiato il bin, ho eseguito uno splendido

./jdk-......bin,

mi estrae appunto l'rpm, lo vado ad eseguire con

rpm -i jdk........rpm e mi dice che il pacchetto è già installato....
Ho provato anche a lanciare Eclipse da terminale con ./eclipse, e stavolta, curiosamente, ha un comportamento diverso: non manda in freeze il sistema, ma il processo rimane bloccato sulla splashscreen iniziale (quella con l'eclissi, appunto).
Strano, nevvero?

[natasha]

Reputo sia opportuno inviarti il file /usr/share/eclipse/configuration/config.ini

[kingv]

no non e' strano e' lo stesso malfunzionamento che avevo io.

tu hai scaricato questo:
jdk-1_5_0_06-linux-i586-rpm.bin
mentre io intendevo quest'altro:
jdk-1_5_0_06-linux-i586.bin

che quando lo lanci non fa altro che scompattarsi in una directory all'interno di quella corrente, poi sistema il path.

se puoi scarica quella che ti ho indicato (che non essendo un rpm non ti genera conflitti), mentre se non ti interessa "sporcare un po' " la tua installazione allora rimuovi il jdk che hai ora (rpm -e --nodeps nomepacchetto) e poi installa quello che hai già scaricato.

fammi sapere.

[natasha]

beh, non posso che farti i miei complimenti: ho scompattato il binario, estratto in /opt, modificato il PATH ed ora riesco a lanciare Eclipse da riga di comando
Certo, continua a bloccarsi se lo lancio da Gnome, e questo è un bel mistero......
Grazie :-*

Nat

[kingv]

Originariamente inviato da natasha

Certo, continua a bloccarsi se lo lancio da Gnome, e questo è un bel mistero......

evidentemente lo lanci con l'environment originale (quello che non funziona).

se non vuoi modificare le impostazioni della jvm per tutti i programmi crati un file myeclipse.sh nella directory di eclipse che contiene qualcosa tipo:

export JAVA_HOME=/opt/j2sdk1.4.2_04/
export PATH=$JAVA_HOME/bin:$PATH
/opt/eclipse/eclipse &

e modifica il link dell'icona facendolo puntare a quello.

non e' elegantissimo ma....