Torna indietro   Hardware Upgrade Forum > Software > Linux, Unix, OS alternativi

Intervista a Stop Killing Games: distruggere videogiochi è come bruciare la musica di Mozart
Intervista a Stop Killing Games: distruggere videogiochi è come bruciare la musica di Mozart
Mentre Ubisoft vorrebbe chiedere agli utenti, all'occorrenza, di distruggere perfino le copie fisiche dei propri giochi, il movimento Stop Killing Games si sta battendo per preservare quella che l'Unione Europea ha già riconosciuto come una forma d'arte. Abbiamo avuto modo di parlare con Daniel Ondruska, portavoce dell'Iniziativa Europa volta a preservare la conservazione dei videogiochi
Samsung Galaxy S25 Edge: il top di gamma ultrasottile e leggerissimo. La recensione
Samsung Galaxy S25 Edge: il top di gamma ultrasottile e leggerissimo. La recensione
Abbiamo provato il nuovo Galaxy S25 Edge, uno smartphone unico per il suo spessore di soli 5,8 mm e un peso super piuma. Parliamo di un device che ha pro e contro, ma sicuramente si differenzia dalla massa per la sua portabilità, ma non senza qualche compromesso. Ecco la nostra prova completa.
HP Elitebook Ultra G1i 14 è il notebook compatto, potente e robusto
HP Elitebook Ultra G1i 14 è il notebook compatto, potente e robusto
Pensato per il professionista sempre in movimento, HP Elitebook Ultra G1i 14 abbina una piattaforma Intel Core Ultra 7 ad una costruzione robusta, riuscendo a mantenere un peso contenuto e una facile trasportabilità. Ottime prestazioni per gli ambiti di produttività personale con un'autonomia lontano dalla presa di corrente che permette di lavorare per tutta la giornata
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 27-08-2005, 22:47   #1
bighni
Junior Member
 
L'Avatar di bighni
 
Iscritto dal: May 2005
Messaggi: 1
ACPI Suse 9.3

Ciao a tutti,
è la prima volta che scrivo qui e che mi cimento con Linux...
Ho da poco messo su la Suse 9.3 ed ho un problemino:
il mio portatile (Toshiba M40-193) non ne vuole sapere di spegnersi...
Quando spengo, esce da X, killa tutto e rimane come ultima scritta:"The system will be halted immediately" e rimane lì...

Ho appreso qua e là che è un problema di ACPI ma non so dove mettere le mani, vi allego il "boot.msg" nel caso potesse esservi di aiuto per aiutarmi a risolvere questo fastidio !!!

Codice:
Inspecting /boot/System.map-2.6.11.4-20a-default
Loaded 22815 symbols from /boot/System.map-2.6.11.4-20a-default.
Symbols match kernel version 2.6.11.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.11.4-20a-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Wed Mar 23 21:52:37 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003ffdfffc (usable)
<4> BIOS-e820: 000000003ffdfffc - 000000003fffffc0 (ACPI data)
<4> BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>On node 0 totalpages: 262111
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 225280 pages, LIFO batch:16
<7>  HighMem zone: 32735 pages, LIFO batch:7
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 TOSINV                                ) @ 0x000e5010
<7>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x3fff89f7
<7>ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x3ffffb30
<7>ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x3ffffbc0
<7>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3fff8be5
<7>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3fff8a2b
<7>ACPI: DSDT (v001 TOSINV SONOMA   0x00001004 INTL 0x02002036) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x1008
<6>ACPI: local apic disabled
<4>Allocating PCI resources starting at 40000000 (gap: 40000000:bff00000)
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/sda8 vga=0x317 selinux=0  splash=0 resume=/dev/sda7
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 1995.828 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1034136k/1048444k available (1865k kernel code, 13600k reserved, 659k data, 204k init, 130940k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Disabled at boot.
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
<7>CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<7>CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1429k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 0c20)
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6
<6>PCI: Using MMCONFIG
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050211
<4>    ACPI-0216: *** Warning: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK
<4>    ACPI-0216: *** Warning: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK
<4>    ACPI-0216: *** Warning: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK
<4>    ACPI-0216: *** Warning: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK
<4>    ACPI-0216: *** Warning: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
<6>ACPI: Embedded Controller [EC0] (gpe 16)
<6>ACPI: Power Resource [PFA1] (off)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 10 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<3>PCI: Cannot allocate resource region 0 of device 0000:06:06.0
<4>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<3>audit(1125184956.728:0): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 11 (level, low) -> IRQ 11
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[pcie00]
<7>Allocate Port Service[pcie03]
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<4>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 10 (level, low) -> IRQ 10
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[pcie00]
<7>Allocate Port Service[pcie02]
<7>Allocate Port Service[pcie03]
<6>ACPI: PCI interrupt 0000:00:1c.1[b] -> GSI 11 (level, low) -> IRQ 11
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[pcie00]
<7>Allocate Port Service[pcie02]
<7>Allocate Port Service[pcie03]
<6>vesafb: framebuffer at 0x90000000, mapped to 0xf8880000, using 6144k, total 131008k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
<6>vesafb: protected mode interface info at c000:5a29
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 57135 bytes,<6>...found (1024x768, 36789 bytes, v3).
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
<4>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI interrupt 0000:00:1e.3[b] -> GSI 5 (level, low) -> IRQ 5
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>NET: Registered protocol family 1
<7>PM: Checking swsusp image.
<7>PM: Resume from disk failed.
<4>ACPI wakeup devices: 
<4>LID0 RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 MODM PS2K 
<6>ACPI: (supports S0 S3 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<5>SCSI subsystem initialized
<7>libata version 1.10 loaded.
<7>ahci version 1.10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:1f.2[b] -> GSI 11 (level, low) -> IRQ 11
<4>ahci: probe of 0000:00:1f.2 failed with error -12
<7>ata_piix version 1.03
<6>ACPI: PCI interrupt 0000:00:1f.2[b] -> GSI 11 (level, low) -> IRQ 11
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
<7>ata1: dev 0 cfg 49:2b00 82:346b 83:5b29 84:6003 85:3468 86:1a09 87:6003 88:203f
<6>ata1: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA
<6>ata1(0): applying bridge limits
<6>ata1: dev 0 configured for UDMA/100
<6>scsi0 : ata_piix
<5>  Vendor: ATA       Model: FUJITSU MHU2100A  Rev: 0000
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
<5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<6>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
<6>Synaptics Touchpad, model: 1
<6> Firmware: 5.9
<6> 180 degree mounted touchpad
<6> Sensor: 37
<6> new absolute packet format
<6> Touchpad has extended capability bits
<6> -> multifinger detection
<6> -> palm detection
<6>synaptics: Toshiba Satellite detected, limiting rate to 40pps.
<6>input: SynPS/2 Synaptics TouchPad on isa0060/serio1
<7>ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
<6>ata2: dev 0 ATAPI, max UDMA/33
<6>ata2(0): applying bridge limits
<6>ata2: dev 0 configured for UDMA/33
<6>scsi1 : ata_piix
<5>  Vendor: MATSHITA  Model: DVD-RAM UJ-831S   Rev: 1.02
<5>  Type:   CD-ROM                             ANSI SCSI revision: 05
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>Attempting manual resume
<7>PM: Checking swsusp image.
<3>swsusp: Suspend partition has wrong signature?
<7>PM: Resume from disk failed.
<5>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda8: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sda8: checking transaction log (sda8)
<4>reiserfs: disabling flush barriers on sda8
<5>ReiserFS: sda8: Using r5 hash to sort names
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 1044184k swap on /dev/sda7.  Priority:42 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
<6>cdrom: open failed.
<6>NTFS driver 2.1.22 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sat Aug 27 23:22:52 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 2355
Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon-1) [ /usr/bin/dbus-daemon-1 --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon-1 ]
done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=0 ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=0 ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
Loading keymap qwerty/it.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
Setting up network interfaces:
done    lo        
    lo        IP address: 127.0.0.1/8   
done    eth0      device: Marvell Technology Group Ltd. Fast Ethernet Controller (rev 10)
    eth0      configuration: eth-id-00:a0:d1:be:49:33
    eth0      (DHCP) . <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
. . . . no IP address yet... backgrounding. 
done    eth1      device: Intel Corporation PRO/Wireless 2200BG (rev 05)
    eth1      configuration: wlan-bus-pci-0000:06:04.0
    eth1      warning: using NO encryption
    eth1      IP address: 192.168.10.166/24   
done    modem0    
    modem0    Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
Initializing random number generatordone
Starting resource managerdone
Starting mdnsd<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Starting fnfxd ...()...missing /proc/acpi/toshibaskipped
Importing Net File System (NFS)unused
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Loading ACPI modules () done
Starting acpid done
Starting nfsboot (sm-notify) done
Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting sound driverStarting cupsddone
done
:  intel8x0done
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
acpid already running, but should be started by powersaved.
Please set acpid service to off or stop it manuallyskipped
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 INIT=/sbin/init KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG= LANG=it_IT.UTF-8 ROOTFS_REALDEV=/lib/klibc//dev/sda8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=it_IT.UTF-8 splash=0 SPLASH=no LC_TIME= ROOTFS_BLKDEV=/dev/sda8 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting service kdmdone
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: fnfxd nfs powersaved smbfs
<notice>killproc: kill(4139,3)
__________________
Nessuna impresa è mai stata compiuta da un uomo ragionevole.
bighni è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


Intervista a Stop Killing Games: distruggere videogiochi è come bruciare la musica di Mozart Intervista a Stop Killing Games: distruggere vid...
Samsung Galaxy S25 Edge: il top di gamma ultrasottile e leggerissimo. La recensione Samsung Galaxy S25 Edge: il top di gamma ultraso...
HP Elitebook Ultra G1i 14 è il notebook compatto, potente e robusto HP Elitebook Ultra G1i 14 è il notebook c...
Microsoft Surface Pro 12 è il 2 in 1 più compatto e silenzioso Microsoft Surface Pro 12 è il 2 in 1 pi&u...
Recensione REDMAGIC Astra Gaming Tablet: che spettacolo di tablet! Recensione REDMAGIC Astra Gaming Tablet: che spe...
Le 18 offerte Amazon del weekend, senza ...
Galaxy S25 Ultra 512GB sotto i 1.000€ su...
Vi piace l'iPhone nero? Su Amazon sono s...
MacBook Air M4 16GB/256GB e 16GB/512GB s...
4 portatili per risparmiare tanto ed ess...
San Marino multa TikTok: non controllano...
Dreame e Roborock in saldo su Amazon: ro...
Pazzesco su Amazon: crollano i prezzi de...
La Corea del Sud vorrebbe costruire una ...
Rilasciati i primi risultati delle anali...
Robot umanoidi low cost? Unitree ci prov...
Non solo Rocket Lab, anche Avio potrebbe...
Chips Act UE: 41,5 milioni di euro a Eph...
Ryzen Threadripper 9000 al debutto il 31...
Nuovi coupon nascosti Amazon (aggiorname...
Chromium
GPU-Z
OCCT
LibreOffice Portable
Opera One Portable
Opera One 106
CCleaner Portable
CCleaner Standard
Cpu-Z
Driver NVIDIA GeForce 546.65 WHQL
SmartFTP
Trillian
Google Chrome Portable
Google Chrome 120
VirtualBox
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 11:27.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Served by www3v