Mdk 8.2 con driver NVidia...

[Plain]

Questo problemino mi assilla da diverso tempo...
In pratica ho scaricato gli ultimi driver da sito di NVidia (2802) e li ho installati.
Prima ho utilizzato il comando make install e poi editato XF86Config-4:

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom

# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.
Load "dbe"

# This loads the Video for Linux module.
Load "v4l"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection

# This loads the Type1 and FreeType font modules

Load "type1"
Load "freetype"
Load "glx"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Generic|SVGA alta frequenza, 1024x768 a 70 Hz"
VendorName "Unknown"
ModelName "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-57.0


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection

Section "Device"
Identifier "NVIDIA GeForce2 DDR (generic)"
VendorName "Unknown"
BoardName "Unknown"
Driver "nvidia"
# VideoRam 65536
# Clock lines


# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"

Option "DPMS" "on"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
Identifier "screen1"
Device "NVIDIA GeForce2 DDR (generic)"
Monitor "Generic|SVGA alta frequenza, 1024x768 a 70 Hz"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection


Section "ServerLayout"
Identifier "layout1"
Screen "screen1"

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard"

Ma non mi partiva più X.

Quindi ho utilizzato gli rpm e rieditato XF86Config-4 nello stesso modo.
Ora: X mi è ripartito regolarmente ma non ho visto nessun logo di NVidia all'avvio, cosa che succedeva con MDK 8.1, e poi non mi parte Tux Racer... Come posso verificare che siano correttamente installati 'sti benedetti driver?

Bye.

[HLM]

ho dato un'occhiata al file di configurazione di x che hai postato e mi sembra a posto... (bisogna fare un paio di modifiche, nulla di che).

anche io ho i driver 2802 di nvidia e ogni volta che parte x mi viene mostrato il logo (fastidioso, quindi prontamente disattivato).

per una prova del nove dai /sbin/lsmod e guarda se tra i moduli caricati trovi NVdriver

per tuxracer, lancialo da console così puoi vedere che messaggio di errore da.

ciao!

[Plain]

Direi che è a posto:

[plain@localhost plain]$ /sbin/lsmod
Module Size Used by Tainted: P
isofs 25792 0 (autoclean)
inflate_fs 19328 0 (autoclean) [isofs]
n_hdlc 6112 1 (autoclean)
ppp_synctty 5120 1 (autoclean)
ppp_generic 19880 3 (autoclean) [ppp_synctty]
slhc 5056 0 (autoclean) [ppp_generic]
opl3 11784 0
sb 7776 1
agpgart 31552 3 (autoclean)
NVdriver 945280 10 (autoclean)
sr_mod 15160 0 (autoclean) (unused)
sb_lib 33888 0 [sb]
uart401 6336 0 [sb_lib]
sound 57292 1 [opl3 sb_lib uart401]
soundcore 4068 5 [sb_lib sound]
af_packet 12488 0 (autoclean)
ip_vs 65400 0 (autoclean)
usb-uhci 21668 0 (unused)
usbcore 59072 1 [usb-uhci]
supermount 62180 3 (autoclean)
ide-scsi 8032 0
scsi_mod 92488 2 [sr_mod ide-scsi]
rtc 5912 0 (autoclean)
ext3 62092 2
jbd 39356 2 [ext3]

Per Tuxracer da root:
[root@localhost plain]# tuxracer
Tux Racer 0.61 -- a Sunspire Studios Production (http://www.sunspirestudios.com)
(c) 1999-2000 Jasmin F. Patry <jfpatry@sunspirestudios.com>
"Tux Racer" is a trademark of Jasmin F. Patry
Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions.
See http://www.gnu.org/copyleft/gpl.html for details.

mcop warning: user defined signal handler found for SIG_PIPE, overriding
/tmp/mcop-plain is not owned by user

Da user Plain:
[plain@localhost plain]$ tuxracer
Tux Racer 0.61 -- a Sunspire Studios Production (http://www.sunspirestudios.com)
(c) 1999-2000 Jasmin F. Patry <jfpatry@sunspirestudios.com>
"Tux Racer" is a trademark of Jasmin F. Patry
Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions.
See http://www.gnu.org/copyleft/gpl.html for details.

Error: Could not open /dev/nvidiactl because the permissions
are too resticitive. Please see the FREQUENTLY ASKED QUESTIONS
section of /usr/share/doc/NVIDIA_GLX-1.0/README for steps
to correct.

[HLM]

dagli un'occhiata
Please see the FREQUENTLY ASKED QUESTIONS
section of /usr/share/doc/NVIDIA_GLX-1.0/README