DFI AM35 PR

Taipei, November 23th, 2000

After launching CM30 and CM35 motherboards that adopt VIA ProSavage PM133/PL133 integrated chipset at the end of August, DFI is going to bring forth a new series of AM 35 motherboard adopting Athlon and Duron CPUs that support Socket A architecture by this November or December.

DFI introduces a series of motherboards supporting the newest CPUs After the success launch of the motherboards adopting ProSavage PM133 integrated chipset that supports Intel Slot 1 and Socket 370 CPU architecture, DFI once again leads its way to introduce the motherboard adopting ProSavage KM133 integrated chipset that supports AMD Socket A CPU architecture. Adopting different north bridge chipsets, DFI’s KM133 motherboards are divided into the following two models: AM35-SC adopting 686A chipset, and AM35-EC adopting 686B chipset.

The series of DFI AM35 motherboards The series of AM35motherboards adopt Socket A processor architecture. The design of microATX supports AMD Athlon 1.2GHz CPU and Duron processor. The supported SDRAM specifications include PC100, PC133, and VCM. AM35 motherboard has a total of two built-in 168-pin DIMM slots; the main memory is expandable up to 1GB. The expandability includes a 4x AGP, two PCI, one AMR, and one ISA expansion slots. The built-in codec audio chip meets AC’97 specification requirements.

Integrating S3 Savage4 high-performance graphics technology The AM35 series of motherboards have integrated 3D and 2D graphic functions of S3 Savage4 graphic chip. It utilizes the Shared Memory Architecture (SMA) to expand the display memory, and also supports additional 4x AGP slot. Users can take advantage of the onboard display function to have a very satisfactory display effect without purchasing additional display card.

AM35-EC motherboard integrating performance and security functions Not only does DFI AM35-EC support ATA/100 high-speed transmission interface, it also provides users with the best safety protection - so-called “Dual Air Bags”. Its function is to prevent damages to the CPU due to the high temperature generated during system operation. Therefore, when the system is started, it provides a double protection to the CPU as to detect the initial temperature. Both the system manufacturers and DIY end-users may take advantage of the new function of AM35-EC to maximize the system performance and meet the future high-speed calculation requirement.

DFI’s CPU protection solution for AMD series The high-end Athlon/Duron microprocessors by AMD generate higher temperature than other CPUs during system operation; as a result, it may cause instability to the system and damage to the CPU. However, for users use DFI exclusive dual air bags solution designated for AMD CPUs can feel easy in mind. DFI dual air bags design comprises the Fan Guardian as the first air bag. It automatically detects the speed of the fan within 5 seconds after system boot. If abnormal speed is detected, which usually means that the fan is not able to provide the optimal heat dispersion for the CPU, the system will automatically shut down in no time to protect the expensive CPU. The second air bag is the Thermal Guardian. The system will check the external environment temperature of the CPU during the time starting from the system boot until the system initialization. If the external environment temperature of the CPU exceeds 60oC, the system will be turned off automatically. Under these double protections, users can easily resolve the problem on the motherboard that adopts Athlon/Duron.

The series of DFI AM35 motherboards passing several certifications DFI AM35 motherboard currently leads other manufacturers in acquiring FCC and CE certifications, and expects to obtain the newest EMI certification issued by BSMI (Bureau of Standards, Metrology and Inspection) Taiwan in December. After acquiring EMI certification, DFI will lead the industry to announce its products in Taiwan. Under a series of strict certifications, the stability of performance and quality of DFI products are reassured for the consumers.

Unveiling the motherboards adopting KM chipsets Since VIA KM133 chipset is still not in mass production, DFI leads the industry to introduce and unveil AM35-BC motherboard that adopts VIA KM100 chipset. AM35-BC has the same specification as that for AM35-SC and AM35-EC except it is unable to support PC133 and ATA/100 hard disks. It is certain that AM35-BC motherboard will be launched in the middle of November and the AM35-EC is expected to be announced at the end of November once VIA KM133 chipset is in mass production and delivery. AM35 motherboards - with the “dual air bags” protective function and the best solution for AMD Athlon and Duron CPUs - are the best solutions for users.