Codividere internet da Linux a Linux

[uovobw]

Ciao a tutti,
sto dientando matto, le ho provate tutte ma non va assolutamente nulla!

Allora:
ho una macchina (linux-FC1) che si connette a internet tramite ppp0, e una macchina linux-deb che si connette alla prima tramite eth0.

In entrambe i dns sono impostati, le reti sono su, una è 192.168.0.1 (la macchina connessa a internet) e l'altra è *.*.*.2 (quella debian) ma non si pingano e mi rispondono che il destination host is unreachable.

Il mio firewall è questo:

#!/bin/bash

#moduli...

/sbin/modprobe ipt_state
/sbin/modprobe ip_conntrack
/sbin/modprobe ipt_limit
/sbin/modprobe ipt_length
/sbin/modprobe iptable_filter
/sbin/modprobe ip_tables
/sbin/modprobe n_hdlc
/sbin/modprobe ip_conntrack_ftp ip_nat_ftp
/sbin/modprobe iptable_nat
/sbin/modprobe ipt_MASQUERADE

# il temibile proc

echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
echo 1 > /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses
echo 1 > /proc/sys/net/ipv4/conf/all/secure_redirects
echo 1 > /proc/sys/net/ipv4/conf/all/send_redirects
echo 1 > /proc/sys/net/ipv4/tcp_syncookies
echo 1 > /proc/sys/net/ipv4/conf/all/accept_source_route
echo 1 > /proc/sys/net/ipv4/conf/all/forwarding
echo 0 > /proc/sys/net/ipv4/conf/all/log_martians
echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter
echo 1 > /proc/sys/net/ipv4/ip_forward

#flusho le regole
/sbin/iptables -F INPUT
/sbin/iptables -F OUTPUT
/sbin/iptables -F FORWARD
/sbin/iptables -t nat -F
/sbin/iptables -t mangle -F

# reimposto le regole
/sbin/iptables -P INPUT DROP
/sbin/iptables -P FORWARD DROP
/sbin/iptables -P OUTPUT ACCEPT
/sbin/iptables -t nat -P PREROUTING DROP
/sbin/iptables -t nat -P POSTROUTING DROP

# ping


#/sbin/iptables -A INPUT -p icmp -i ppp0 -m state --state ESTABLISHED -j ACCEPT
#/sbin/iptables -A INPUT -p icmp -i ppp0 -m state --state RELATED -j ACCEPT
#/sbin/iptables -A INPUT -p icmp -i ppp0 --icmp-type echo-request -m length --length 128:65535 -j DROP
#/sbin/iptables -A INPUT -p icmp -i ppp0 --icmp-type echo-request -m limit --limit 1/s -j ACCEPT
#/sbin/iptables -A INPUT -p icmp -i ppp0 -j REJECT --reject-with icmp-host-unreachable


#/sbin/iptables -A OUTPUT -p icmp -m state --state ESTABLISHED -j LOG --log-level 1
#/sbin/iptables -A OUTPUT -p icmp -m state --state ESTABLISHED -j ACCEPT
#/sbin/iptables -A OUTPUT -p icmp -m state --state RELATED -j LOG --log-level 1
#/sbin/iptables -A OUTPUT -p icmp -m state --state RELATED -j ACCEPT
#/sbin/iptables -A OUTPUT -p icmp --icmp-type echo-request -m length --length 128:65535 -j DROP
#/sbin/iptables -A OUTPUT -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT

# drop INVALID connections
/sbin/iptables -A INPUT -m state --state INVALID -j LOG --log-level 1
/sbin/iptables -A OUTPUT -m state --state INVALID -j LOG --log-level 1
/sbin/iptables -A FORWARD -m state --state INVALID -j LOG --log-level 1
/sbin/iptables -A INPUT -m state --state INVALID -j DROP
/sbin/iptables -A OUTPUT -m state --state INVALID -j DROP
/sbin/iptables -A FORWARD -m state --state INVALID -j DROP

# droppo le spoofing dalla interfaccia di rete
#/sbin/iptables -A INPUT -i ppp0 --source 192.168.0.* -j DROP
#/sbin/iptables -A INPUT -i ppp0 --source 10/8.*.*.* -j DROP
#/sbin/iptables -A INPUT -i ppp0 --source 172.16/12.*.* -j DROP
#/sbin/iptables -A INPUT -i ppp0 --source 192.168/16.*.* -j DROP
#/sbin/iptables -A INPUT -i ppp0 --source 127/8.*.*.* -j DROP

#retina locale
#/sbin/iptables -A INPUT -i eth0 --source 192.168.0.2 -j ACCEPT
#/sbin/iptables -A INPUT --source localhost -p tcp --dport 2009 -j ACCEPT
#/sbin/iptables -A INPUT --source localhost -p udp --dport 2009 -j ACCEPT

# allow all established and related
/sbin/iptables -A INPUT -m state --state ESTABLISHED -j ACCEPT
/sbin/iptables -A INPUT -m state --state RELATED -j ACCEPT
/sbin/iptables -A OUTPUT -m state --state ESTABLISHED -j ACCEPT
/sbin/iptables -A OUTPUT -m state --state RELATED -j ACCEPT

#aMule
#/sbin/iptables -A INPUT -i ppp0 -p tcp --dport 4660 -j ACCEPT
#/sbin/iptables -A INPUT -i ppp0 -p udp --dport 4670 -j ACCEPT
#/sbin/iptables -A INPUT -i ppp0 -p udp --dport 4663 -j ACCEPT
#/sbin/iptables -A INPUT --source 127.0.0.1 -p tcp --dport 1241 -j ACCEPT

#---------------------------------------------------------------
#accendo l'ethernet

#/sbin/ifconfig eth0 192.168.0.1 netmask 255.255.255.0 up

# Attiva il nat (routing)

/sbin/iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE

/sbin/iptables -A FORWARD -i ppp0 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT
/sbin/iptables -A FORWARD -i eth0 -o ppp0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT


e in teoria dovrebbe andare!!!!

ma non lo fa, se sulla macchina debian pingo google.com mi dice host unknown!!

Non so più cosa pensare...
inoltre le due macchine non si piangano a vicenda...
la mia tabella di routing:

1 Kernel IP routing table
2 Destination Gateway Genmask Flags Metric Ref Use Iface
3 c72g1.mo-atm1.n * 255.255.255.255 UH 0 0 0 ppp0
4 192.168.0.0 * 255.255.255.0 U 0 0 0 ppp0
5 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
6 default c72g1.mo-atm1.n 0.0.0.0 UG 0 0 0 ppp0


le righe 3 e 6 servono per la mia adsl USB, le altre 2 (la 4 e la 5) le ho messe io pocciando, e adesso non riesco a eliminarle.

Chi mi può dare una mano??
servono altre info?

grazie ciao

[Psycotic]

posso darti un consiglio? nemmeno ho letto tutto il tuo post.. ma sono sicuro che se lo fai piano piano e lo provi piano piano.. ti funziona tutto..
innanzitutto prova senza nessuna regola e vedi se e' tutto ok.. e dopo ti costruisci il resto