WD TV HD Media Player

[3nric0]

io avevo il 555 molto bello e completo per 60 € direi che è un ottimo telecomando. Purtroppo dopo un mese mia figlia nel sedersi sul divano l'ha centrato in pieno con un ginocchio ed il display si è crepato. ho dovuto quindi buttarmi su un meliconi light6 ( quasi 40€ ) piu robusto, ma secondo me rapportato all'harmony fa pietà.

[toppino]

Originariamente inviato da cionci

Quell'errore di aggiornamento non so da cosa derivi. L'url funziona perfettamente. Probabilmente non riesci ad accedere ad internet dal WDTV.

Installa nano invece di usare vi.
Per installare nano:

ipkg update
ipkg install nano

nano /percorso/nomefile

Scusa cionci non ho capito a cosa ti riferisci con l'ultima frase

PS: ^ è il tasto Ctrl

Poi come posso essere certo che la connessione sia funzionante ,io ho collegato il wdtv ad uno switch con 5 porte nella altre la connessione e condivisa e funzionante esiste un test ........Thx

[cionci]

Aprendo nano vedrai che io comandi sono scritti così: ^X ^E etc etc, il carattere ^ corrisponde al tasto ctrl, quindi, ad esempio, per uscire dovrai premere Ctrl X.
Per vedere se il WDTV esce su internet puoi ad esempio dare questo comando:

ping -c 4 maya.ngi.it

Hai configurato il WDTV tramite DHCP o manualmente ?

Riporta qui l'output del comando:

ifconfig eth0

[-Mirco-]

Originariamente inviato da 3nric0

io avevo il 555 molto bello e completo per 60 € direi che è un ottimo telecomando. Purtroppo dopo un mese mia figlia nel sedersi sul divano l'ha centrato in pieno con un ginocchio ed il display si è crepato. ho dovuto quindi buttarmi su un meliconi light6 ( quasi 40€ ) piu robusto, ma secondo me rapportato all'harmony fa pietà.

ma l'harmony permette (se hai una porta infrarossi nel pc) anche di gestire il pc tipo mouse e tastiera?

[angelorc]

Originariamente inviato da cionci

E' stato rilasciato il firmware beta 1.02.10 Nessuna grossa novità, almeno per noi.

sono andato sul sito ma non ho trovato l'aggiornamento scusa la mia ignoranza ma dove lo trovo?

[cionci]

http://www.wdc.com/wdtvprerelease/

[V3rcingetorige]

Originariamente inviato da cionci

http://www.wdc.com/wdtvprerelease/

Scusate l'assenza.. Ma mi sono intrippato con altri progetti (ASRock ION 330 e XBMC LIVE... Con tutto il rispetto per il MITICO WDTV, un ALTRO PIANETA...)

Bye!

[DegreeLessNess]

ciao a tutti!

sono passato dalla versione 1.00.01 alla 1.02.07 , prima leggeva quasi tutto (167/178) , e ci metteva pochissimo a far partire un film e a caricare allo startup. vi tengo aggiornati sulle differenze

[toppino]

Addirittura ora non mi vanno più nemmeno le condivisioni che prima funzionavano perfettamente,siccome ho due schede di rete e su di una ho la connesssione condivisa l'altra no ,quindi ho spostato il cavo da una a l'altra cambiando l'ip tipo il primo era 192.168.0.x ora sono passato a 192.168.1.x aggiungendo il gateway per la connessione .

#

# Example net.mounts file to demonstrate auto-mounting
# of network shares


# Mount a windows file share (must be done by IP address)

# xmount //192.168.0.33/ShareName ShareName cifs

#  if your "guest" account is disabled, you must supply username and password
# xmount //192.168.0.34/ShareName ShareName cifs user=username,pass=password


# Mount a NFS share
xmount 192.168.1.1:/home/filippo/Scrivania/musica Musica2 nfs 
xmount 192.168.1.1:/home/filippo/Scrivania/Dvx Dvx2 nfs
# xmount 192.168.0.44:/nfsroot ShareName nfs

# Notice that we no longer need to modprobe, nor create the directory.
# That is handled for us by xmount.

# Also note that if you store a net.mounts file in /conf/ then it will ALSO
# execute on startup.

#
# Network configuration file

#You can override the hostname here:

HOST=wdtv

# if you do not set a hostname,a random one is assigned.


# attempt to set jumbo frames
# MTU=9000
# Your other computers should have same MTU or it will break NFS


#
# Dynamic IP Configuration:

#DHCP=yes

#
# Static IP Configuration:  (only if not DHCP)

DHCP=no
IP=192.168.1.12
GW=192.168.1.1
NM=255.255.255.0
#DNS1=192.168.0.1
#DNS2=205.171.3.65

#
# Optional:  specify time server host:

#NTP=pool.ntp.org
sleep 5

Questo è l'ultimo file message .txt dato dal wdtv

Jan  1 00:00:25 wdtv syslog.info syslogd started: BusyBox v1.10.0
Jan  1 00:00:25 wdtv user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Jan  1 00:00:25 wdtv user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Jan  1 00:00:25 wdtv user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Jan  1 00:00:25 wdtv user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Jan  1 00:00:25 wdtv user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Jan  1 00:00:25 wdtv user.info kernel:  BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Jan  1 00:00:25 wdtv user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Jan  1 00:00:25 wdtv user.warn kernel: CPU revision is: 00019069
Jan  1 00:00:25 wdtv user.warn kernel: Determined physical RAM map:
Jan  1 00:00:25 wdtv user.warn kernel:  memory: 06fe0000 @ 10020000 (usable)
Jan  1 00:00:25 wdtv user.debug kernel: On node 0 totalpages: 94208
Jan  1 00:00:25 wdtv user.debug kernel:   DMA zone: 94208 pages, LIFO batch:31
Jan  1 00:00:25 wdtv user.debug kernel:   DMA32 zone: 0 pages, LIFO batch:0
Jan  1 00:00:25 wdtv user.debug kernel:   Normal zone: 0 pages, LIFO batch:0
Jan  1 00:00:25 wdtv user.debug kernel:   HighMem zone: 0 pages, LIFO batch:0
Jan  1 00:00:25 wdtv user.warn kernel: Built 1 zonelists
Jan  1 00:00:25 wdtv user.notice kernel: Kernel command line: console=ttyS0
Jan  1 00:00:25 wdtv user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 00:00:25 wdtv user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 00:00:25 wdtv user.warn kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 00:00:25 wdtv user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 00:00:25 wdtv user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 00:00:25 wdtv user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 00:00:25 wdtv user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan  1 00:00:25 wdtv user.warn kernel: Using 148.500 MHz high precision timer.
Jan  1 00:00:25 wdtv user.warn kernel: Console: colour dummy device 80x25
Jan  1 00:00:25 wdtv user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 00:00:25 wdtv user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 00:00:26 wdtv user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Jan  1 00:00:26 wdtv user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Jan  1 00:00:26 wdtv user.warn kernel: Mount-cache hash table entries: 512
Jan  1 00:00:26 wdtv user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 00:00:26 wdtv user.notice root: Displaying detected USB devices...
Jan  1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 16
Jan  1 00:00:26 wdtv user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Jan  1 00:00:26 wdtv user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Jan  1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Jan  1 00:00:26 wdtv user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Jan  1 00:00:26 wdtv user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Jan  1 00:00:26 wdtv user.warn kernel: PCI: Region size is 16384KB
Jan  1 00:00:26 wdtv user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Jan  1 00:00:26 wdtv user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usbfs
Jan  1 00:00:26 wdtv user.info kernel: usbcore: registered new driver hub
Jan  1 00:00:26 wdtv user.warn kernel: Created /proc/cpucache_info entry.
Jan  1 00:00:26 wdtv user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Jan  1 00:00:26 wdtv user.warn kernel: fuse init (API version 7.3)
Jan  1 00:00:26 wdtv user.info kernel: Initializing Cryptographic API
Jan  1 00:00:26 wdtv user.info kernel: io scheduler noop registered
Jan  1 00:00:26 wdtv user.info kernel: io scheduler anticipatory registered
Jan  1 00:00:26 wdtv user.info kernel: io scheduler deadline registered
Jan  1 00:00:26 wdtv user.info kernel: io scheduler cfq registered
Jan  1 00:00:26 wdtv user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Jan  1 00:00:26 wdtv user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Jan  1 00:00:26 wdtv user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan  1 00:00:26 wdtv user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Jan  1 00:00:26 wdtv user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Jan  1 00:00:26 wdtv user.info kernel: loop: loaded (max 8 devices)
Jan  1 00:00:26 wdtv user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Jan  1 00:00:26 wdtv user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 00:00:26 wdtv user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:00:26 wdtv user.warn kernel: CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan  1 00:00:26 wdtv user.notice kernel: number of CFI chips: 1
Jan  1 00:00:26 wdtv user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 00:00:26 wdtv user.notice kernel: Using physmap partition definition
Jan  1 00:00:26 wdtv user.notice kernel: Adding partition #1-#5
Jan  1 00:00:26 wdtv user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Jan  1 00:00:26 wdtv user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Jan  1 00:00:26 wdtv user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Jan  1 00:00:26 wdtv user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Jan  1 00:00:26 wdtv user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Jan  1 00:00:26 wdtv user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Jan  1 00:00:26 wdtv user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Jan  1 00:00:26 wdtv user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Jan  1 00:00:26 wdtv user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Jan  1 00:00:26 wdtv user.warn kernel: TangoX USB initializing...
Jan  1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Jan  1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Jan  1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Jan  1 00:00:26 wdtv user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: USB hub foun
Jan  1 00:00:26 wdtv user.info kernel: d
Jan  1 00:00:26 wdtv user.info kernel: hub 1-0:1.0: 2 ports detected
Jan  1 00:00:26 wdtv user.warn kernel: TangoX USB was initialized.
Jan  1 00:00:26 wdtv user.warn kernel: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
Jan  1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Jan  1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Jan  1 00:00:26 wdtv user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Jan  1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: USB hub found
Jan  1 00:00:26 wdtv user.info kernel: hub 2-0:1.0: 2 ports detected
Jan  1 00:00:26 wdtv user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Jan  1 00:00:26 wdtv user.info kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:26 wdtv user.notice root:  [059f:1019] 1-1( 2.00,480m) LaCie Desktop Hard Drive/00E0010A74382
Jan  1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: USB hub found
Jan  1 00:00:26 wdtv user.info kernel: hub 1-2:1.0: 4 ports detected
Jan  1 00:00:26 wdtv user.info kernel: usbcore: registered new driver usb-storage
Jan  1 00:00:26 wdtv user.info kernel: USB Mass Storage support registered.
Jan  1 00:00:26 wdtv user.info kernel: NET: Registered protocol family 2
Jan  1 00:00:26 wdtv user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:26 wdtv user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:00:26 wdtv user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:00:26 wdtv user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan  1 00:00:26 wdtv user.info kernel: TCP reno registered
Jan  1 00:00:26 wdtv user.info kernel: TCP bic registered
Jan  1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 1
Jan  1 00:00:27 wdtv user.info kernel: NET: Registered protocol family 17
Jan  1 00:00:27 wdtv user.info kernel: Freeing unused kernel memory: 252k freed
Jan  1 00:00:27 wdtv user.info kernel: usb 1-2.1: new high speed USB device using tangox-ehci-hcd and address 3
Jan  1 00:00:27 wdtv user.info kernel: usb 1-2.3: new high speed USB device using tangox-ehci-hcd and address 4
Jan  1 00:00:27 wdtv user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 4
Jan  1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 00:00:27 wdtv user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 5
Jan  1 00:00:27 wdtv user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:27 wdtv user.debug kernel: usb-storage: device found at 5
Jan  1 00:00:27 wdtv user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 00:00:27 wdtv user.notice kernel:   Vendor: Sony      Model: Storage Media     Rev: 0100
Jan  1 00:00:27 wdtv user.notice root:  [05e3:0608] 1-2( 2.00,480m) USB2.0 Hub
Jan  1 00:00:27 wdtv user.notice kernel:   Type:   Direct-Access                      ANSI SCSI revision: 00
Jan  1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan  1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan  1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 00:00:27 wdtv user.notice kernel: SCSI device sda: 7831552 512-byte hdwr sectors (4010 MB)
Jan  1 00:00:27 wdtv user.notice kernel: sda: Write Protect is off
Jan  1 00:00:27 wdtv user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan  1 00:00:27 wdtv user.err kernel: sda: assuming drive cache: write through
Jan  1 00:00:27 wdtv user.info kernel:  sda: sda1
Jan  1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan  1 00:00:27 wdtv user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan  1 00:00:27 wdtv user.notice kernel:   Vendor: Hitachi   Model: HDT721010SLA360   Rev:     
Jan  1 00:00:27 wdtv user.notice kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan  1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan  1 00:00:27 wdtv user.notice kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
Jan  1 00:00:27 wdtv user.err kernel: sdb: assuming drive cache: write through
Jan  1 00:00:27 wdtv user.info kernel:  sdb:<6>kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:27 wdtv user.info kernel: EXT3 FS on loop1, internal journal
Jan  1 00:00:27 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 00:00:27 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 00:00:27 wdtv user.warn kernel: llad: module license 'LGPL' taints kernel.
Jan  1 00:00:27 wdtv user.warn kernel:  sdb1
Jan  1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan  1 00:00:27 wdtv user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan  1 00:00:27 wdtv user.debug kernel: usb-storage: device scan complete
Jan  1 00:00:27 wdtv user.warn kernel: em8xxx: no version for "llad_open" found: kernel tainted.
Jan  1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Jan  1 00:00:27 wdtv user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Jan  1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Jan  1 00:00:27 wdtv user.warn kernel: mumk_register_tasklet: (0) tasklet c401e000 status @c938aa24
Jan  1 00:00:27 wdtv user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_07/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Jan  1 00:00:27 wdtv user.notice root:  [0b95:1780] 1-2.1( 2.00,480m) AX178/000572
Jan  1 00:00:28 wdtv user.notice root:  [054c:0243] 1-2.3( 2.00,480m) Storage Media/2A08120809201
Jan  1 00:00:28 wdtv user.notice root:  [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Jan  1 00:00:29 wdtv user.notice root:  [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Jan  1 00:00:29 wdtv daemon.info utelnetd[616]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jan  1 00:00:29 wdtv user.notice root: INIT: mounting app binaries...
Jan  1 00:00:29 wdtv user.notice root: Mounting opt.bin at /opt
Jan  1 00:00:29 wdtv user.info kernel: EXT3 FS on loop0, 
Jan  1 00:00:29 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:29 wdtv user.warn kernel: internal journal
Jan  1 00:00:29 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 00:00:29 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 00:00:30 wdtv user.notice root: Path set to /opt/sbin:/opt/bin:/boot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Jan  1 00:00:31 wdtv user.notice root: vfat: Waiting for 49F8-5E5B to mount
Jan  1 00:00:31 wdtv user.notice root: Polling detected drives...
Jan  1 00:00:32 wdtv user.notice root: xmount.scan: MDEV=sdb1
Jan  1 00:00:32 wdtv user.notice root: /dev/sdb1: UUID="110ee2b3-e557-47ec-ab49-a0ceb329e947" TYPE="ext3" 
Jan  1 00:00:33 wdtv user.notice root: xmount.scan: Will mount /dev/sdb1 sdb1 ext3
Jan  1 00:00:33 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3
Jan  1 00:00:33 wdtv authpriv.info dropbear[754]: Running in background
Jan  1 00:00:34 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan  1 00:00:34 wdtv user.notice root: Waiting for /dev/sda1 to come online (UUID=49F8-5E5B)...
Jan  1 00:00:38 wdtv user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:38 wdtv user.info kernel: Loading wireless extentions module...
Jan  1 00:00:38 wdtv user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:45 wdtv user.warn kernel: mii: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:45 wdtv user.warn kernel: usbnet: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:50 wdtv user.notice root: net.agent: Called for eth0
Jan  1 00:00:50 wdtv user.info kernel: eth0: register 'asix' at usb-tangox-ehci-hcd-2.1, ASIX AX88178 USB 2.0 Ethernet, 00:50:b6:01:85:eb
Jan  1 00:00:50 wdtv user.info kernel: usbcore: registered new driver asix
Jan  1 00:00:50 wdtv user.info kernel: /home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
Jan  1 00:00:50 wdtv user.info kernel: usbcore: registered new driver dm9601
Jan  1 00:00:50 wdtv user.info kernel: usbcore: registered new driver kaweth
Jan  1 00:00:51 wdtv user.info kernel: usbcore: registered new driver MOSCHIP usb-ethernet driver
Jan  1 00:00:51 wdtv user.info kernel: pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
Jan  1 00:00:51 wdtv user.info kernel: usbcore: registered new driver pegasus
Jan  1 00:00:51 wdtv user.info kernel: usbcore: registered new driver catc
Jan  1 00:00:51 wdtv user.info kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
Jan  1 00:00:51 wdtv user.info kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
Jan  1 00:00:51 wdtv user.info kernel: usbcore: registered new driver rtl8150
Jan  1 00:00:51 wdtv user.warn kernel: cdc_ether: No versions for exported symbols. Tainting kernel.
Jan  1 00:00:51 wdtv user.info kernel: usbcore: registered new driver cdc_ether
Jan  1 00:00:52 wdtv user.info kernel: usbcore: registered new driver cdc_subset
Jan  1 00:00:52 wdtv user.info kernel: usbcore: registered new driver net1080
Jan  1 00:00:52 wdtv user.info kernel: usbcore: registered new driver plusb
Jan  1 00:00:52 wdtv user.info kernel: usbcore: registered new driver rndis_host
Jan  1 00:00:52 wdtv user.info kernel: usbcore: registered new driver gl620a
Jan  1 00:00:55 wdtv user.notice root: net.agent: Using /boot/net.config: DHCP=no IP=192.168.1.12 GW=192.168.1.1
Jan  1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 0
Jan  1 00:00:56 wdtv user.notice root: Testing static IP assignment...
Jan  1 00:00:56 wdtv user.warn kernel: eth0: ax8817x - Link Status is: 1
Jan  1 00:00:58 wdtv daemon.notice statd[1362]: Version 1.1.5 Starting
Jan  1 00:00:58 wdtv daemon.notice statd[1362]: statd running as root. chown /tmp/nfs/sm to choose different user
Jan  1 00:01:01 wdtv user.notice root: Ping: 6 packets transmitted, 6 packets received, 0% packet loss
Jan  1 00:01:01 wdtv user.notice root: net.agent: Using pool.ntp.org to set system time
Jan  1 00:01:01 wdtv user.notice root: Device eth0 configged as 192.168.1.12/192.168.1.1/255.255.255.0
Jan  1 00:01:02 wdtv user.notice root: net.mounts: loading /boot/net.mounts
Jan  1 00:01:03 wdtv user.warn kernel: sunrpc: No versions for exported symbols. Tainting kernel.
Jan  1 00:01:03 wdtv user.warn kernel: lockd: No versions for exported symbols. Tainting kernel.
Jan  1 00:01:04 wdtv user.debug kernel: ir: Enable NEC decoder (0x00000000)
Jan  1 00:01:04 wdtv user.debug kernel: ir: Enable RC5 decoder (0x00000000)
Jan  1 00:01:04 wdtv user.notice root: xmount: 192.168.1.1:/home/filippo/Scrivania/musica Musica2 nfs
Jan  1 00:01:04 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan  1 00:01:05 wdtv user.notice root: xmount: 192.168.1.1:/home/filippo/Scrivania/Dvx Dvx2 nfs
Jan  1 00:01:05 wdtv user.notice root: xmount: no /tmp/boot, setting mount.stages
Jan  1 00:01:11 wdtv user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:01:11 wdtv user.info kernel: EXT3 FS on sdb1, 
Jan  1 00:01:11 wdtv user.info kernel: internal journal
Jan  1 00:01:11 wdtv user.info kernel: EXT3-fs: recovery complete.
Jan  1 00:01:11 wdtv user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 00:01:12 wdtv user.notice root: xmounter: entering stage2
Jan  1 00:01:13 wdtv user.notice root: xmount: /dev/sdb1 sdb1 ext3 defaults
Jan  1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan  1 00:01:13 wdtv user.notice root: xmount: 192.168.1.1:/home/filippo/Scrivania/musica Musica2 nfs soft,intr
Jan  1 00:01:13 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan  1 00:01:14 wdtv user.notice root: xmount: 192.168.1.1:/home/filippo/Scrivania/Dvx Dvx2 nfs soft,intr
Jan  1 00:01:14 wdtv user.notice root: xmount: /tmp/boot exists, now mounting...
Jan  1 00:01:16 wdtv user.notice root: Now mounted:
Jan  1 00:01:16 wdtv user.notice root: rootfs on / type rootfs (rw)
Jan  1 00:01:16 wdtv user.notice root: proc on /proc type proc (rw,nodiratime)
Jan  1 00:01:16 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 00:01:16 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 00:01:16 wdtv user.notice root: /dev/sda1 on /boot type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 00:01:16 wdtv user.notice root: /dev/loop1 on / type ext3 (rw,noatime,nodiratime,data=ordered)
Jan  1 00:01:16 wdtv user.notice root: none on /proc type proc (rw,nodiratime)
Jan  1 00:01:16 wdtv user.notice root: usb on /proc/bus/usb type usbfs (rw)
Jan  1 00:01:16 wdtv user.notice root: sysfs on /sys type sysfs (rw)
Jan  1 00:01:16 wdtv user.notice root: mdev on /dev type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: devpts on /dev/pts type devpts (rw)
Jan  1 00:01:16 wdtv user.notice root: none on /tmp type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: none on /apps type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: /dev/loop0 on /opt type ext3 (rw,data=ordered)
Jan  1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB1/110ee2b3-e557-47ec-ab49-a0ceb329e947 type ext3 (rw,data=ordered)
Jan  1 00:01:16 wdtv user.notice root: /dev/sda1 on /tmp/media/usb/USB2/49F8-5E5B type vfat (rw,sync,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
Jan  1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/sdb1 type ext3 (rw,data=ordered)
Jan  1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/sdb1 type ext3 (rw,data=ordered)
Jan  1 00:01:16 wdtv user.notice root: /dev/sdb1 on /tmp/media/usb/USB2/49F8-5E5B/sdb1 type ext3 (rw,data=ordered)
Jan  1 00:01:16 wdtv user.notice root: none on /tmp/media/usb/Musica2 type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Musica2 type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: none on /tmp/media/usb/Dvx2 type tmpfs (rw)
Jan  1 00:01:16 wdtv user.notice root: none on /tmp/media/usb/USB2/49F8-5E5B/Dvx2 type tmpfs (rw)
Jan  1 00:02:00 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:00 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:18 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jan  1 00:02:18 wdtv user.warn kernel: program dmaosd is using a deprecated SCSI ioctl, please convert it to SG_IO

Questo è il mio file /etc/export

# /etc/exports: the access control list for filesystems which may be exported
#		to NFS clients.  See exports(5).
#
# Example for NFSv2 and NFSv3:
# /srv/homes       hostname1(rw,sync) hostname2(ro,sync)
#
# Example for NFSv4:
# /srv/nfs4        gss/krb5i(rw,sync,fsid=0,crossmnt)
# /srv/nfs4/homes  gss/krb5i(rw,sync)
#
/home/filippo/Scrivania/musica 192.168.1.12(rw,sync)
/home/filippo/Scrivania/Dvx 192.168.1.12(rw,sync)
#Garage pc filippo2
/home/filippo/Scrivania/condivisione2 192.168.1.10(rw,sync)
#Garage pc filippo1
/home/filippo/Scrivania/dati 192.168.1.7(rw,sync)

Perche con la scheda che usavo prima a base 0 funzionava e con base 1 no....????

filippo@filippo-desktop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:10:a7:01:2a:60  
          inet addr:192.168.0.3  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000 
          Byte RX:0 (0.0 B)  Byte TX:0 (0.0 B)
          Interrupt:11 Indirizzo base:0xa800 

eth1      Link encap:Ethernet  HWaddr 00:90:27:7b:12:e0  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::290:27ff:fe7b:12e0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1901 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2117 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000 
          Byte RX:1294339 (1.2 MB)  Byte TX:380408 (380.4 KB)

lo        Link encap:Loopback locale  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:856 errors:0 dropped:0 overruns:0 frame:0
          TX packets:856 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:0 
          Byte RX:57582 (57.5 KB)  Byte TX:57582 (57.5 KB)

ppp0      Link encap:Point-to-Point Protocol  
          inet addr:79.16.57.44  P-t-P:217.141.255.48  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:1768 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1910 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:3 
          Byte RX:1243181 (1.2 MB)  Byte TX:318800 (318.8 KB)

Questo penso sia quello che hai chiesto tu Cionci

filippo@filippo-desktop:~$ ssh 192.168.1.12 -l root
root@192.168.1.12's password:


BusyBox v1.10.0 (2009-02-15 05:09:42 CST) built-in shell (msh)
Enter 'help' for a list of built-in commands.

# ping -c 4 maya.ngi.it
ping: bad address 'maya.ngi.it'
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:50:B6:01:85:EB
inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:57296 errors:0 dropped:0 overruns:0 frame:0
TX packets:3084 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:82739092 (78.9 MiB) TX bytes:499931 (488.2 KiB)

Riavviando la condivisione sia dal pc che dal wdtv adesso a caricato bene il tutto e sembra funzionare ma rimane il problema della connessione.....attendo info a riguardo grazie di tutto

[cionci]

Intanto mancano i DNS, sono ancora commentati.

[toppino]

Originariamente inviato da cionci

Intanto mancano i DNS, sono ancora commentati.

Ma basta decomentare questi oppure devo inserire quelli presenti nel pc ,nel file che ora non mi ricordo quale sia

[cionci]

Originariamente inviato da toppino

Ma basta decomentare questi oppure devo inserire quelli presenti nel pc ,nel file che ora non mi ricordo quale sia

Devi decommentarli e mettere i DNS del tuo provider.

[ph4rm4c0n]

ciao a tutti!
Ho da pochi giorni acquistato questo gioiellino (a mio modesto parere!) e volevo sottoporvi un problema. Ieri mi è arrivato il cavo HDMI acquistato sulla baia; lo collego al box e alla tv ma nulla, non mi visualizza niente e mi dice "controllare cavo segnale". Così provo il cavo sul decoder HD di Sky e sull'Xbox360 e in questi due casi funziona regolarmente. Faccio così una controprova: collego il cavo HDMI uscito in dotazione col decoder di Sky al WD TV e tutto funziona regolarmente.
Preciso che ho aggiornato il box all'ultimo firmware originale disponibile; inoltre il cavo che ho acquistato è un cavo HDMI 1.3b con contatti dorati. (vi riporto la specifica della baia)
Confido nella vostra esperienza e nelle vostre competenze per risolvere questo problema se possibile....grazie!

[cionci]

Non puoi far funzionare il decoder di Sky con il cavo nuovo ed il WDTV con l'altro, cosa te lo impedisce ?
Nota che cavi HDMI di qualità eccelsa non servono assolutamente a niente. La trasmissione è digitale, un bit o arriva corretto o arriva sbagliato (in tal caso lo noteresti sicuramente), al contrario in campo analogico i cavi di alta qualità avevano un senso perché garantivano una resistenza più bassa e minori accoppiamenti e quindi una fedeltà maggiore del segnale fra i due capi.

[ph4rm4c0n]

Originariamente inviato da cionci

Non puoi far funzionare il decoder di Sky con il cavo nuovo ed il WDTV con l'altro, cosa te lo impedisce ?

Grazie per l'interessamento! Certo che posso lasciare le cose come stanno (anche alla luce di quanto detto da te circa la qualità eccelsa o meno dei cavi!)...la mia era solo una curiosità del perchè questo "malfunzionamento".

[MaRaUdEr!!!]

Originariamente inviato da -Mirco-

ma l'harmony permette (se hai una porta infrarossi nel pc) anche di gestire il pc tipo mouse e tastiera?

anche io ero indeciso se prendere il 555 (budget sui 60 euro) oppure se fare una mezza pazzia...e passare o allo one (touchscreen, spledido!!!!) oppure all'865.
Alla fine su AV Magazine ho trovato un 865 nuovissimo a 85 euro...e ho preso quello.
Credimi, valgono tutti i soldi che costano. Sono programmabili al 101%...ma non penso possano sostituire la rotellina del mouse.

ciao

[MaRaUdEr!!!]

Originariamente inviato da cionci

Non puoi far funzionare il decoder di Sky con il cavo nuovo ed il WDTV con l'altro, cosa te lo impedisce ?
Nota che cavi HDMI di qualità eccelsa non servono assolutamente a niente. La trasmissione è digitale, un bit o arriva corretto o arriva sbagliato (in tal caso lo noteresti sicuramente), al contrario in campo analogico i cavi di alta qualità avevano un senso perché garantivano una resistenza più bassa e minori accoppiamenti e quindi una fedeltà maggiore del segnale fra i due capi.

quindi cionci...un cavo da 5 euro porta la stessa qualità video/audio da uno da 150 euro?!

[cionci]

Originariamente inviato da MaRaUdEr!!!

quindi cionci...un cavo da 5 euro porta la stessa qualità video/audio da uno da 150 euro?!

A patto che sia a parità di standard e che non dia errori di visualizzazione, assolutamente sì. Alla lunga, ma alla lunga, ci potrà essere un error rate leggermente più alto da parte dell'altro cavo. Ma se non ci sono errori di visualizzazione, per qualsiasi utente non può fare alcuna differenza.

[Gypsy64]

Originariamente inviato da leoben

Non ho mai usato il wd tv per vedere le foto.
Però ho visto che tra le impostazioni c'è pure da impostare l'intervallo (credo sia appunto il tempo fra una foto e l'altra) il cui valore minimo però è 3 secondi...

Grazie per la risposta. Non resta che aspettare e sperare che rendano più veloce il WD tv per guardare le fotografie, (( forse è possibbile farlo con un firmware moddato ?)) perchè assolutamente non capisco questo valore minimo di 3 secondi.

[cionci]

Cioè, per spiegarmi meglio: cavo A da 20€, cavo B da 100€...il primo produce un errore ogni 100 ore di filmato, il secondo un errore ogni 500 ore di filmato...cosa comporta poi alla fine per l'utente ?