direct rendering

[uhmuhmuhm]

Ho una scheda video matrox G400 millenium e la slackware 9.0.
Ieri sera ho compilato il kernel 2.4.22 e così mi sono deciso ad attivare il direct rendering seguendo le istruzioni dal sito DRI ( http://dri.sourceforge.net ) il problema è che ogni volta che riavvio il computer il direct rendering non è attivato, e per attivarlo ogni volta devo eseguire il programmino scaricato dal sito DRI in modalità testuale.
E' una cosa piuttosto noiosa farlo sempre, non c'è un modo per fargli ricordare che il direct rendering ce l'ha, e se lo deve tenere?
Grazie.

[AnonimoVeneziano]

Posta il file "/etc/X11/XF86Config"

Ciao

[uhmuhmuhm]

Eccolo... Ho tolto diversi commenti per cercare di ridurlo, se dovessi aver tolto qualcosa di troppo (anche se ci sono stato attento) ditemi che sezioni vi servono in maniera particolare che vi copioncollo sollo quelle









Section "Module"

Load "dbe" # Double buffer extension

SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

Load "type1"
Load "freetype"
Load "speedo"

Load "glx"

Load "dri"

EndSection

Section "dri"
Mode 0666
EndSection

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

EndSection

Section "ServerFlags"

EndSection

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

EndSection

Section "InputDevice"

Identifier "Mouse1"
Driver "mouse"

Option "Protocol" "PS/2"

Option "Device" "/dev/mouse"

EndSection

Section "Monitor"

Identifier "My Monitor"

HorizSync 30-85

VertRefresh 48-150

vendorname "ELSA"
modelname "Ecomo 17H96"
ModeLine "1024x768/60Hz" 65 1024 1032 1176 1344 768 771 777 806 -HSync -VSync
EndSection

Section "Device"
Identifier "VESA Framebuffer"
Driver "mga"
vendorname "Matrox"
boardname "Matrox G400/G450"
EndSection

Section "Screen"
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"

DefaultDepth 16

Subsection "Display"
Depth 8
Modes "1024x768/60Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768/60Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768/60Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768/60Hz" "800x600" "640x480"
Virtual 0 0
EndSubsection

EndSection

Section "ServerLayout"

Identifier "Simple Layout"

Screen "Screen 1"

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection


Section "InputDevice"

Identifier "Keyboard"

Option "XkbModel" "pc104"
Option "XkbLayout" "it"
Driver "keyboard"
EndSection


Section "InputDevice"

Identifier "Mouse"

Option "Protocol" "NetScrollPS/2"
Option "Device" "/dev/psaux"
Driver "mouse"
Option "Emulate3Buttons"
Option "ZAxisMapping" "4 5"
EndSection

[AnonimoVeneziano]

Aggiungi al file queste linee :

Section "DRI"
Mode 0666
EndSection

Dimmi se va, se non va riposta

[uhmuhmuhm]

Ehm... C'è già è la seconda sezione, dopo la sezione modules.
Comunque quello non serve per permettere a tutti gli utenti di sfruttare l'accelerazione? Quando non c'era soltano root l'aveva a disposizione.

[AnonimoVeneziano]

Ops che pirla non l'ho vista

Comunque io avevo fatto questo ragionamento .

Dato che il DRI si installa da ROOT magari tu installi , poi per provarlo attivi X da root e funziona , poi riavvii e avvii da utente e non funza + . Mi sembrava l'unica spiegazione plausibile .

Magari prova a spiegare bene tutti i passaggi , e poi magari posta pure il file /var/log/XFree86.0.log

Ciao

[uhmuhmuhm]

Uhm... Non esattamente, root non ha nemmeno il comando 'startx'.
In modalità testuale faccio installare il pacchetto prese dal sito DRI a root, poi torno a essere utente normale e a quel punto avvio X.
Tutto funziona alla perfezione.

Spengo il computer, riavvio e da utente normale avvio X.
Typo su una shell glxinfo e guarda un pò... Non è più attivo il direct rendering
Per poterlo dirmettere devo:

In modalità testuale faccio installare il pacchetto prese dal sito DRI a root, poi torno a essere utente normale e a quel punto avvio X.

Ecco quel file di log.






XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20 i686 [ELF]
Build Date: 01 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Aug 26 18:34:11 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000002c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0c:0: chip 1073,000c card 8086,5332 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:0e:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 102b,0525 card 102b,2179 rev 04 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf4100000 - 0xf4ffffff (0xf00000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G400 AGP rev 4, Mem @ 0xfc000000/25, 0xf4100000/14, 0xf4800000/23
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf4008000 - 0xf40080ff (0x100) MX[b]
[1] -1 0 0xf4000000 - 0xf4007fff (0x8000) MX[b]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[b]O
[3] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b](B)
[4] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[b](B)
[5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[6] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[7] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[8] -1 0 0x00001420 - 0x0000142f (0x10) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf4008000 - 0xf40080ff (0x100) MX[b]
[1] -1 0 0xf4000000 - 0xf4007fff (0x8000) MX[b]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[b]O
[3] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b](B)
[4] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[b](B)
[5] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[6] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[7] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[8] -1 0 0x00001420 - 0x0000142f (0x10) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xf4008000 - 0xf40080ff (0x100) MX[b]
[6] -1 0 0xf4000000 - 0xf4007fff (0x8000) MX[b]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[b]O
[8] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b](B)
[9] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[14] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[15] -1 0 0x00001420 - 0x0000142f (0x10) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xf4008000 - 0xf40080ff (0x100) MX[b]
[6] -1 0 0xf4000000 - 0xf4007fff (0x8000) MX[b]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[b]O
[8] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b](B)
[9] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[14] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[15] -1 0 0x00001420 - 0x0000142f (0x10) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xf4008000 - 0xf40080ff (0x100) MX[b]
[6] -1 0 0xf4000000 - 0xf4007fff (0x8000) MX[b]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[b]O
[8] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b](B)
[9] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[17] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[18] -1 0 0x00001420 - 0x0000142f (0x10) IX[b]
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) MGA(0): Chipset: "mgag400" (G400)
(II) Loading sub module "mga_hal"
(II) LoadModule: "mga_hal"
(WW) Warning, couldn't open module mga_hal
(II) UnloadModule: "mga_hal"
(EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)
(==) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xFC000000
(--) MGA(0): MMIO registers at 0xF4100000
(--) MGA(0): Pseudo-DMA transfer window at 0xF4800000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xfc000000,0x2000000)
(--) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(==) MGA(0): Write-combining range (0xfc000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x85f7768
(II) MGA(0): Manufacturer: SNY Model: 37b Serial#: 6008803
(II) MGA(0): Year: 2000 Week: 20
(II) MGA(0): EDID Version: 1.2
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) MGA(0): Sync: Separate Composite
(II) MGA(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24
(II) MGA(0): Gamma: 2.50
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): First detailed timing is preferred mode
(II) MGA(0): GTF timings supported
(II) MGA(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.605
(II) MGA(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 720x400@88Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@67Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@87Hz (interlaced)
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@70Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): 1280x1024@75Hz
(II) MGA(0): 1152x870@75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) MGA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(0): #3: hsize: 1152 vsize 864 refresh: 85 vid: 22897
(II) MGA(0): #4: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) MGA(0): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 94.5 MHz Image Size: 312 x 234 mm
(II) MGA(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) MGA(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) MGA(0): Ranges: V min: 48 V max: 120 Hz, H min: 30 H max: 94 kHz, PixClock max 260 MHz
(II) MGA(0): Monitor name: CPD-2403
(II) MGA(0): Serial No: 6008803
(II) MGA(0): end of I2C Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 300 MHz
(WW) MGA(0): config file vrefresh range 48-150Hz not within DDC vrefresh range 48-120Hz
(II) MGA(0): My Monitor: Using hsync range of 30.00-85.00 kHz
(II) MGA(0): My Monitor: Using vrefresh range of 48.00-150.00 Hz
(II) MGA(0): Clock range: 12.00 to 300.00 MHz
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) MGA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) MGA(0): Not using default mode "1280x960" (width too large for virtual size)
(II) MGA(0): Not using default mode "1152x864" (width too large for virtual size)
(II) MGA(0): Not using default mode "1152x768" (width too large for virtual size)
(--) MGA(0): Virtual size is 1024x768 (pitch 1024)
(**) MGA(0): *Mode "1024x768/60Hz": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768/60Hz" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
(**) MGA(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) MGA(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) MGA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) MGA(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) MGA(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync
(**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) MGA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) MGA(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) MGA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) MGA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) MGA(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
(**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) MGA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) MGA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) MGA(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) MGA(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) MGA(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) MGA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) MGA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) MGA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) MGA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) MGA(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) MGA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) MGA(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) MGA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) MGA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(--) MGA(0): Display dimensions: (330, 240) mm
(--) MGA(0): DPI set to (78, 81)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b]
[1] 0 0 0xf4100000 - 0xf4103fff (0x4000) MX[b]
[2] 0 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xf4008000 - 0xf40080ff (0x100) MX[b]
[9] -1 0 0xf4000000 - 0xf4007fff (0x8000) MX[b]
[10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[b]O
[11] -1 0 0xf4800000 - 0xf4ffffff (0x800000) MX[b](B)
[12] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[b](B)
[13] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[20] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
[21] -1 0 0x00001420 - 0x0000142f (0x10) IX[b]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) MGA(0): Write-combining range (0xfc000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "mga"
(II) MGA(0): [drm] drmOpen failed
(EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
(II) MGA(0): Using 7424 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(==) MGA(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
SwitchToMode - scrn: 0 clock: 36000
hdsp: 640 hbeg: 696 hend: 752 httl: 832
vdsp: 480 vbeg: 481 vend: 484 vttl: 509 flags: 10
Checking against clock: 65000 (65000)
hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
Checking against clock: 56300 (56300)
hdsp: 800 hbeg: 832 hend: 896 httl: 1048
vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
Checking against clock: 36000 (36000)
hdsp: 640 hbeg: 696 hend: 752 httl: 832
vdsp: 480 vbeg: 481 vend: 484 vttl: 509 flags: 10
SwitchToMode - Succeeded
SwitchToMode - scrn: 0 clock: 65000
hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
Checking against clock: 65000 (65000)
hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
SwitchToMode - Succeeded

[Icedguardian]

La sparo li anche se non conosco bene la situazione

Non puoi eseguire in automatico il programmino all'avvio del PC così
ti sistema la situazione???

OK, io ci ho provato non lapidatemi

[uhmuhmuhm]

Bhè... Teoricamente sì Però come avvio in automatico un programma coi permessi di root? M'insegni?

[AnonimoVeneziano]

Ohi bho !

Come ho fatto a non pensarci!!

Ma non hai caricato il modulo "mga.o" ?Devi farlo caricare prima dell' avvio di X

Prima di avviare digita da root :

"modprobe mga"

questo caricherà il modulo , poi puoi avviare X .

Per farlo caricare automaticamente ad ogni avvio bisognerebbe sapere che distro usi

Ciao

[Swos]

Originariamente inviato da uhmuhmuhm
Ho una scheda video matrox G400 millenium e la slackware 9.0.

AnonimoVeneziano leggi bene :P

[AnonimoVeneziano]

Originariamente inviato da Swos
AnonimoVeneziano leggi bene :P

Sempre li pronti a tirare le freccette come gli indiani

Comunque la Slack non la conosco , comunque presumo che ci sarà nel file /etc un file di nome "modules" o "modules.autoload" (non modules.conf ) , all' interno ci piazzi il nome del modulo e ad ogni avvio di sistema te lo carica automaticamente .

Oppure c'è un metodo + raffinato usando il file /etc/modules.conf



Ricorda che per caricare il DRI bisogna anke caricare AGPGART

Ciao

[uhmuhmuhm]

Grazie mille
Siamo quasi arrivati alla soluzione .
In /etc, c'è anche modules.conf, ma è completamente vuoto, e ho visto che viene incluso da modules.devfs, cosa ci devo aggiungere di preciso?
mga.o
?
E AGPGART come/dove lo carico?

[AnonimoVeneziano]

allora, fai cosi :

dai da root i comandi :

modprobe agpgart

modprobe mga

poi mi posti l'output dei comandi :

cat /proc/misc

cat /proc/devices

Ciao

[uhmuhmuhm]

Ciò che mi hai detto di fare l'ho fatto ora che il direct rendering non è abilitato. (se ti serve mentre è abilitato lo rifò )

# cat /proc/misc
175 agpgart
135 rtc
1 psaux

# cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
21 sg
29 fb
108 ppp
109 lvm
128 ptm
129 ptm
136 pts
137 pts
162 raw
180 usb
226 drm

Block devices:
1 ramdisk
2 fd
3 ide0
7 loop
8 sd
9 md
22 ide1
58 lvm
65 sd
66 sd

[uhmuhmuhm]

Up