Aiuto problema - no screen found(EE) e xinit: unable to connect to X server

[Kaya]

Ho fatto un giro su google per te e sembra che sia un problema di driver mancanti oppure di udev

Fai alcun verifiche con "lspci" e "lspci -vv | grep VGA"
Poi verifica se /dev/dri/card0 (qui potrebbe essere un problema di udev) esiste, perchè banalmente X dice "hey, guarda che non ho alcun device li a cui appoggiarmi".
Altro test è partire con un kernel precedente (magari hai fatto un update?).
Sto dando per scontato che stai usando ubuntu.. (ecco mostraci anche il kernel in uso e quelli possibili).
Hai un apt update/upgrade in "attesa"?

[ander2712]

Originariamente inviato da Kaya

Ho fatto un giro su google per te e sembra che sia un problema di driver mancanti oppure di udev

cioe?

Originariamente inviato da Kaya

Fai alcun verifiche con "lspci" e "lspci -vv | grep VGA"

ecco il risultato di lspci

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation QM57 Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
10:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
48:03.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 01)
48:03.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
48:03.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 02)
48:03.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 07)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)

ed ecco quello di "lspci -vv | grep VGA"

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Originariamente inviato da Kaya

Poi verifica se /dev/dri/card0 (qui potrebbe essere un problema di udev) esiste, perchè banalmente X dice "hey, guarda che non ho alcun device li a cui appoggiarmi".

non esiste nemmeno la cartella dri

Originariamente inviato da Kaya

Altro test è partire con un kernel precedente (magari hai fatto un update?).

qua mi odierete tra i tentativi - mo non ne faccio piu tanto sto peggiorando - ho installato un kernel successivo più che precedente , avevo il 5.15 e ho messo la 6.1 ...sotto la lista...

Originariamente inviato da Kaya

Sto dando per scontato che stai usando ubuntu.. (ecco mostraci anche il kernel in uso e quelli possibili).

sì sì ubuntu ...ecco la lista

ii linux-image-4.15.0-20-generic 4.15.0-20.21 amd64 Signed kernel image generic
ii linux-image-4.15.0-36-generic 4.15.0-36.39 amd64 Signed kernel image generic
rc linux-image-4.15.0-38-generic 4.15.0-38.41 amd64 Signed kernel image generic
rc linux-image-4.15.0-39-generic 4.15.0-39.42 amd64 Signed kernel image generic
rc linux-image-4.15.0-42-generic 4.15.0-42.45 amd64 Signed kernel image generic
rc linux-image-4.15.0-43-generic 4.15.0-43.46 amd64 Signed kernel image generic
rc linux-image-4.15.0-45-generic 4.15.0-45.48 amd64 Signed kernel image generic
rc linux-image-4.15.0-48-generic 4.15.0-48.51 amd64 Signed kernel image generic
rc linux-image-4.15.0-51-generic 4.15.0-51.55 amd64 Signed kernel image generic
rc linux-image-4.15.0-52-generic 4.15.0-52.56 amd64 Signed kernel image generic
rc linux-image-4.15.0-54-generic 4.15.0-54.58 amd64 Signed kernel image generic
rc linux-image-4.15.0-55-generic 4.15.0-55.60 amd64 Signed kernel image generic
rc linux-image-4.15.0-58-generic 4.15.0-58.64 amd64 Signed kernel image generic
rc linux-image-4.15.0-60-generic 4.15.0-60.67 amd64 Signed kernel image generic
rc linux-image-4.15.0-72-generic 4.15.0-72.81 amd64 Signed kernel image generic
rc linux-image-5.0.0-37-generic 5.0.0-37.40 amd64 Signed kernel image generic
rc linux-image-5.15.0-46-generic 5.15.0-46.49 amd64 Signed kernel image generic
rc linux-image-5.15.0-48-generic 5.15.0-48.54 amd64 Signed kernel image generic
rc linux-image-5.15.0-52-generic 5.15.0-52.58 amd64 Signed kernel image generic
rc linux-image-5.15.0-56-generic 5.15.0-56.62 amd64 Signed kernel image generic
rc linux-image-5.15.0-57-generic 5.15.0-57.63 amd64 Signed kernel image generic
ii linux-image-5.15.0-58-generic 5.15.0-58.64 amd64 Signed kernel image generic
rc linux-image-5.3.0-24-generic 5.3.0-24.26 amd64 Signed kernel image generic
rc linux-image-5.3.0-29-generic 5.3.0-29.31 amd64 Signed kernel image generic
rc linux-image-5.3.0-40-generic 5.3.0-40.32 amd64 Signed kernel image generic
rc linux-image-5.3.0-42-generic 5.3.0-42.34 amd64 Signed kernel image generic
rc linux-image-5.3.0-46-generic 5.3.0-46.38 amd64 Signed kernel image generic
rc linux-image-5.3.0-53-generic 5.3.0-53.47 amd64 Signed kernel image generic
rc linux-image-5.4.0-107-generic 5.4.0-107.121 amd64 Signed kernel image generic
rc linux-image-5.4.0-109-generic 5.4.0-109.123 amd64 Signed kernel image generic
rc linux-image-5.4.0-110-generic 5.4.0-110.124 amd64 Signed kernel image generic
rc linux-image-5.4.0-122-generic 5.4.0-122.138 amd64 Signed kernel image generic
rc linux-image-5.4.0-31-generic 5.4.0-31.35 amd64 Signed kernel image generic
rc linux-image-5.4.0-33-generic 5.4.0-33.37 amd64 Signed kernel image generic
rc linux-image-5.4.0-37-generic 5.4.0-37.41 amd64 Signed kernel image generic
rc linux-image-5.4.0-39-generic 5.4.0-39.43 amd64 Signed kernel image generic
rc linux-image-5.4.0-40-generic 5.4.0-40.44 amd64 Signed kernel image generic
rc linux-image-5.4.0-48-generic 5.4.0-48.52 amd64 Signed kernel image generic
rc linux-image-5.4.0-51-generic 5.4.0-51.56 amd64 Signed kernel image generic
rc linux-image-5.4.0-52-generic 5.4.0-52.57 amd64 Signed kernel image generic
rc linux-image-5.4.0-54-generic 5.4.0-54.60 amd64 Signed kernel image generic
rc linux-image-5.4.0-56-generic 5.4.0-56.62 amd64 Signed kernel image generic
rc linux-image-5.4.0-58-generic 5.4.0-58.64 amd64 Signed kernel image generic
rc linux-image-5.4.0-66-generic 5.4.0-66.74 amd64 Signed kernel image generic
rc linux-image-5.4.0-70-generic 5.4.0-70.78 amd64 Signed kernel image generic
rc linux-image-5.4.0-72-generic 5.4.0-72.80 amd64 Signed kernel image generic
rc linux-image-5.4.0-73-generic 5.4.0-73.82 amd64 Signed kernel image generic
rc linux-image-5.4.0-74-generic 5.4.0-74.83 amd64 Signed kernel image generic
rc linux-image-5.4.0-77-generic 5.4.0-77.86 amd64 Signed kernel image generic
rc linux-image-5.4.0-81-generic 5.4.0-81.91 amd64 Signed kernel image generic
rc linux-image-5.4.0-84-generic 5.4.0-84.94 amd64 Signed kernel image generic
rc linux-image-5.4.0-90-generic 5.4.0-90.101 amd64 Signed kernel image generic
rc linux-image-5.4.0-92-generic 5.4.0-92.103 amd64 Signed kernel image generic
rc linux-image-5.4.0-99-generic 5.4.0-99.112 amd64 Signed kernel image generic
ii linux-image-6.1.0-1004-oem 6.1.0-1004.4 amd64 Signed kernel image OEM
ii linux-image-generic 5.15.0.58.56 amd64 Generic Linux kernel image
ii linux-image-oem-22.04c 6.1.0.1004.4 amd64 OEM Linux kernel image

Originariamente inviato da Kaya

Hai un apt update/upgrade in "attesa"?

No in mezzo a queste prove ho pure aggiornato

[ander2712]

poi la cosa assurda è che ogni tanto vedo lo splash screen e ogni tanto no
ora ho riavviato ed è partito per un secondo lo splash screen, allora ho ricopiato il log di /.local/share/xorg/Xorg.1.log

[ 2748.262]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 2748.431] Current Operating System: Linux lifeander-LIFEBOOK-T730 6.1.0-1004-oem #4-Ubuntu SMP PREEMPT_DYNAMIC Wed Jan 4 15:26:53 UTC 2023 x86_64
[ 2748.431] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-1004-oem root=UUID=e5f8863a-e131-4229-99e2-e5a48f790d66 ro quiet splash nomodeset vt.handoff=7
[ 2748.570] xorg-server 2:21.1.3-2ubuntu2.5 (For technical support please see http://www.ubuntu.com/support)
[ 2748.616] Current version of pixman: 0.40.0
[ 2748.708] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2748.708] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2748.892] (==) Log file: "/home/lifeander/.local/share/xorg/Xorg.1.log", Time: Mon Jan 16 21:48:28 2023
[ 2748.940] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2748.940] (==) No Layout section. Using the first Screen section.
[ 2748.940] (==) No screen section available. Using defaults.
[ 2748.940] (**) |-->Screen "Default Screen Section" (0)
[ 2748.940] (**) | |-->Monitor "<default monitor>"
[ 2748.940] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2748.940] (==) Automatically adding devices
[ 2748.940] (==) Automatically enabling devices
[ 2748.940] (==) Automatically adding GPU devices
[ 2748.940] (==) Automatically binding GPU devices
[ 2748.940] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2748.940] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2748.940] Entry deleted from font path.
[ 2748.940] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2748.940] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2748.940] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2748.940] (II) Loader magic: 0x5634cfd34020
[ 2748.940] (II) Module ABI versions:
[ 2748.940] X.Org ANSI C Emulation: 0.4
[ 2748.940] X.Org Video Driver: 25.2
[ 2748.940] X.Org XInput driver : 24.4
[ 2748.940] X.Org Server Extension : 10.0
[ 2748.942] (++) using VT number 1

[ 2748.944] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 2748.948] (--) PCI:*(0@0:2:0) 8086:0046:10cf:1508 rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[ 2748.948] (II) LoadModule: "glx"
[ 2748.948] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2748.950] (II) Module glx: vendor="X.Org Foundation"
[ 2748.950] compiled for 1.21.1.3, module version = 1.0.0
[ 2748.950] ABI class: X.Org Server Extension, version 10.0
[ 2748.950] (==) Matched modesetting as autoconfigured driver 0
[ 2748.950] (==) Matched fbdev as autoconfigured driver 1
[ 2748.950] (==) Matched vesa as autoconfigured driver 2
[ 2748.950] (==) Assigned the driver to the xf86ConfigLayout
[ 2748.950] (II) LoadModule: "modesetting"
[ 2748.950] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2748.950] (II) Module modesetting: vendor="X.Org Foundation"
[ 2748.950] compiled for 1.21.1.3, module version = 1.21.1
[ 2748.950] Module class: X.Org Video Driver
[ 2748.950] ABI class: X.Org Video Driver, version 25.2
[ 2748.950] (II) LoadModule: "fbdev"
[ 2748.950] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2748.950] (II) Module fbdev: vendor="X.Org Foundation"
[ 2748.951] compiled for 1.21.1.3, module version = 0.5.0
[ 2748.951] Module class: X.Org Video Driver
[ 2748.951] ABI class: X.Org Video Driver, version 25.2
[ 2748.951] (II) LoadModule: "vesa"
[ 2748.951] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2748.951] (II) Module vesa: vendor="X.Org Foundation"
[ 2748.951] compiled for 1.21.1.3, module version = 2.5.0
[ 2748.951] Module class: X.Org Video Driver
[ 2748.951] ABI class: X.Org Video Driver, version 25.2
[ 2748.951] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2748.951] (II) FBDEV: driver for framebuffer: fbdev
[ 2748.951] (II) VESA: driver for VESA chipsets: vesa
[ 2748.951] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 2748.951] (EE) open /dev/dri/card0: No such file or directory
[ 2748.951] (WW) Falling back to old probe method for modesetting
[ 2748.951] (EE) open /dev/dri/card0: No such file or directory
[ 2748.951] (II) Loading sub module "fbdevhw"
[ 2748.951] (II) LoadModule: "fbdevhw"
[ 2748.951] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2748.954] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2748.954] compiled for 1.21.1.3, module version = 0.0.2
[ 2748.954] ABI class: X.Org Video Driver, version 25.2
[ 2748.954] (EE) Unable to find a valid framebuffer device
[ 2748.954] (WW) Falling back to old probe method for fbdev
[ 2748.954] (II) Loading sub module "fbdevhw"
[ 2748.954] (II) LoadModule: "fbdevhw"
[ 2748.954] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2748.954] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2748.954] compiled for 1.21.1.3, module version = 0.0.2
[ 2748.954] ABI class: X.Org Video Driver, version 25.2
[ 2748.954] (II) FBDEV(2): using default device
[ 2748.954] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 2748.954] (EE) Screen 0 deleted because of no matching config section.
[ 2748.954] (II) UnloadModule: "modesetting"
[ 2748.954] (EE) Screen 0 deleted because of no matching config section.
[ 2748.954] (II) UnloadModule: "fbdev"
[ 2748.954] (II) UnloadSubModule: "fbdevhw"
[ 2748.954] (EE)
Fatal server error:
[ 2748.954] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 2748.954] (EE)
[ 2748.954] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2748.954] (EE) Please also check the log file at "/home/lifeander/.local/share/xorg/Xorg.1.log" for additional information.
[ 2748.954] (EE)
[ 2749.069] (EE) Server terminated with error (1). Closing log file.

in alcuni casi se riavvio non vedo lo splash e mi sfarfalla il terminale (noiosissimo mentre si danno i comandi) ...macchediavolo!

[Cosmo]

Ora vorrei vedere il contenuto delle dir
/etc/X11/
e
/etc/X11/xorg.conf.d

Grazie

[ander2712]

Originariamente inviato da Cosmo

Ora vorrei vedere il contenuto delle dir
/etc/X11/
e
/etc/X11/xorg.conf.d

Grazie

contr'ordine la X11 non è vuota ... contiene
app-defaults
defaults-display-manager
openbox
xinit
xorg.conf.d
Xreset.d
Xsession
Xsession.options
XvMCConfig
cursors
fonts
rgb.txt
xkb
Xreset
Xresources
Xsession.d
xms
Xwrapper.config

in /etc/X11/xorg.conf.d c'è solo un 00-keyboard.conf

ma scusate l'ignoranza: ho capito bene che i file xorg sono del server grafico e i file x11 del display (driver + risoluzione, ecc) ...o questa mia convinzione è errata?

[Cosmo]

Prova a partire con il vecchio kernel, il 5.19 o quello che è

[Cosmo]

Originariamente inviato da ander2712

ma scusate l'ignoranza: ho capito bene che i file xorg sono del server grafico e i file x11 del display (driver + risoluzione, ecc) ...o questa mia convinzione è errata?

Si, è errata.
La dir X11 è un retaggio di quando il vecchio server grafico era, appunto, X11 (anche detto xfree86.) che è stato sostituito dieci anni fa da xorg.

[Kaya]

Fai anche un
lspci -k
e
lspci -vvv

che vediamo cosa salta fuori.
Sembra quasi colpa di udev che non mappa /dev/dri

Torno a dire che secondo me manca proprio il modulo..mi dici il modello di pc/cpu/scheda video?

[ander2712]

Originariamente inviato da Cosmo

Prova a partire con il vecchio kernel, il 5.19 o quello che è

lo avevo già fatto, provate tutte le presenti in grub ma nulla

[ander2712]

Originariamente inviato da Cosmo

Si, è errata.
La dir X11 è un retaggio di quando il vecchio server grafico era, appunto, X11 (anche detto xfree86.) che è stato sostituito dieci anni fa da xorg.

ah ok capito, grazie

[ander2712]

Originariamente inviato da Kaya

[...]..mi dici il modello di pc/cpu/scheda video?

intanto ecco la mia datasheet:

System:
Kernel: 6.1.0-1004-oem x86_64 bits: 64 compiler: N/A Console: tty 1 DM: LXDM
Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
Machine:
Type: Laptop System: FUJITSU product: LIFEBOOK T730 v: 10601156164 serial: <superuser required>
Chassis: type: 10 v: LIFEBOOK T730 serial: <superuser required>
Mobo: FUJITSU model: FJNB219 v: G2 serial: <superuser required> BIOS: FUJITSU // Phoenix
v: Version 1.08 date: 03/01/2011
Battery:
ID-1: CMB1 charge: 62.6 Wh (100.0%) condition: 62.6/62.6 Wh (100.0%) volts: 12.4 min: 10.8
model: Fujitsu CP422590-02 type: Li-ion serial: <filter> status: Full
CPU:
Info: dual core model: Intel Core i5 M 460 bits: 64 type: MT MCP smt: enabled arch: Westmere
rev: 5 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB
Speed (MHz): avg: 1405 high: 1866 min/max: 1199/2534 boost: enabled cores: 1: 1199 2: 1866
3: 1199 4: 1359 bogomips: 20217
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel Core Processor Integrated Graphics vendor: Fujitsu driver: N/A bus-ID: 00:02.0
chip-ID: 8086:0046 class-ID: 0300
Display: server: X.org v: 1.21.1.3 driver: X: loaded: vesa unloaded: fbdev,modesetting
gpu: N/A tty: 128x48
Message: GL data unavailable in console. Try -G --display
Audio:
Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Fujitsu
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403
Sound Server-1: ALSA v: k6.1.0-1004-oem running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel 82577LM Gigabit Network vendor: Fujitsu driver: e1000e v: kernel port: 1840
bus-ID: 00:19.0 chip-ID: 8086:10ea class-ID: 0200
IF: enp0s25 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel pcie: speed: 2.5 GT/s
lanes: 1 bus-ID: 10:00.0 chip-ID: 8086:4235 class-ID: 0280
IF: wlp16s0 state: down mac: <filter>
IF-ID-1: ham0 state: unknown speed: 10 Mbps duplex: full mac: <filter>
IF-ID-2: lxcbr0 state: down mac: <filter>
IF-ID-3: wwan0 state: down mac: N/A
IF-ID-4: wwan1 state: down mac: <filter>
Drives:
Local Storage: total: 1.13 TiB used: 83.77 GiB (7.2%)
ID-1: /dev/mmcblk0 model: 00000 size: 60 GiB type: SSD serial: <filter> scheme: MBR
ID-2: /dev/sda vendor: Western Digital model: WD10J31X-00U3VT0 size: 931.51 GiB
speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 1A01 scheme: MBR
ID-3: /dev/sdb vendor: OCZ model: AGILITY3 size: 167.68 GiB speed: 3.0 Gb/s type: SSD
serial: <filter> rev: 2.15 scheme: MBR

[Kaya]

ribadisco che sembrano mancare i driver

guarda questo suggerimento
https://forums.linuxmint.com/viewtop...fee4f#p1737618

in effetti il tuo xorg.conf è vuoto e questo è strano..

[ander2712]

Originariamente inviato da Kaya

Fai anche un
lspci -k
e
lspci -vvv

che vediamo cosa salta fuori.
Sembra quasi colpa di udev che non mappa /dev/dri

Torno a dire che secondo me manca proprio il modulo..mi dici il modello di pc/cpu/scheda video?

il -k

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Fujitsu Limited. Core Processor DRAM Controller
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
Subsystem: Fujitsu Limited. Core Processor Integrated Graphics Controller
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset HECI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
Subsystem: Fujitsu Limited. 82577LM Gigabit Network Connection
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset High Definition Audio
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation QM57 Chipset LPC Interface Controller (rev 05)
Subsystem: Fujitsu Limited. QM57 Chipset LPC Interface Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset SMBus Controller
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset Thermal Subsystem
Kernel driver in use: intel ips
Kernel modules: intel_ips
10:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Ultimate N WiFi Link 5300
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
48:03.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 01)
Subsystem: Fujitsu Limited. Cardbus bridge
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
48:03.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
Subsystem: Fujitsu Limited. Integrated MMC/SD Controller
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
48:03.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 02)
Subsystem: Fujitsu Limited. Integrated MS/xD Controller
48:03.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 07)
Subsystem: Fujitsu Limited. Firewire (IEEE 1394)
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Fujitsu Limited. Core Processor QuickPath Architecture Generic Non-core Registers
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Fujitsu Limited. Core Processor QuickPath Architecture System Address Decoder
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Fujitsu Limited. Core Processor QPI Link 0
ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
Subsystem: Fujitsu Limited. 1st Generation Core i3/5/7 Processor QPI Physical 0
ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
Subsystem: Fujitsu Limited. 1st Generation Core i3/5/7 Processor Reserved
ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
Subsystem: Fujitsu Limited. 1st Generation Core i3/5/7 Processor Reserved

il -vvv

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Fujitsu Limited. Core Processor DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Limited. Core Processor Integrated Graphics Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel modules: i915

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset HECI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f2827800 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee08004 Data: 0023
Kernel driver in use: mei_me
Kernel modules: mei_me

00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
Subsystem: Fujitsu Limited. 82577LM Gigabit Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f2800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2825000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee04004 Data: 0022
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e

00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f2828000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset High Definition Audio
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f2820000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee01004 Data: 0022
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE- FLReset+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=02
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Bus: primary=00, secondary=08, subordinate=0f, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: f0000000-f1ffffff [size=32M]
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x0 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset PCI Express Root Port 6
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Bus: primary=00, secondary=10, subordinate=17, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: f2400000-f24fffff [size=1M]
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset PCI Express Root Port 2
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f2828400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=48, subordinate=49, sec-latency=32
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: f2500000-f25fffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Fujitsu Limited. 82801 Mobile PCI Bridge

00:1f.0 ISA bridge: Intel Corporation QM57 Chipset LPC Interface Controller (rev 05)
Subsystem: Fujitsu Limited. QM57 Chipset LPC Interface Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 25
Region 0: I/O ports at 1888 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1880 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1860 [size=32]
Region 5: Memory at f2827000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee02004 Data: 0024
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2828800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801

00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
Subsystem: Fujitsu Limited. 5 Series/3400 Series Chipset Thermal Subsystem
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f2826000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: intel ips
Kernel modules: intel_ips

10:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Ultimate N WiFi Link 5300
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee08004 Data: 0026
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Device Serial Number 00-21-6a-ff-ff-ae-65-da
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

48:03.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 01)
Subsystem: Fujitsu Limited. Cardbus bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=48, secondary=49, subordinate=49, sec-latency=176
Memory window 0: c8000000-cbffffff (prefetchable)
Memory window 1: cc000000-cfffffff
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Bridge: PM- B3+
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

48:03.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) (prog-if 01)
Subsystem: Fujitsu Limited. Integrated MMC/SD Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci

48:03.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 02)
Subsystem: Fujitsu Limited. Integrated MS/xD Controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f2501000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

48:03.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 07) (prog-if 10 [OHCI])
Subsystem: Fujitsu Limited. Firewire (IEEE 1394)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2502000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f2500800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci

ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Fujitsu Limited. Core Processor QuickPath Architecture Generic Non-core Registers
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Fujitsu Limited. Core Processor QuickPath Architecture System Address Decoder
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Fujitsu Limited. Core Processor QPI Link 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
Subsystem: Fujitsu Limited. 1st Generation Core i3/5/7 Processor QPI Physical 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
Subsystem: Fujitsu Limited. 1st Generation Core i3/5/7 Processor Reserved
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
Subsystem: Fujitsu Limited. 1st Generation Core i3/5/7 Processor Reserved
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

[ander2712]

Originariamente inviato da Kaya

ribadisco che sembrano mancare i driver

guarda questo suggerimento
https://forums.linuxmint.com/viewtop...fee4f#p1737618

in effetti il tuo xorg.conf è vuoto e questo è strano..

vero, ecco l'uotput di inxi -G --display

Graphics:
Device-1: Intel Core Processor Integrated Graphics driver: N/A
Display: server: X.org v: 1.21.1.3 driver: X: loaded: vesa unloaded: fbdev,modesetting
gpu: N/A
Message: No GL data found on this system.

[Cosmo]

Originariamente inviato da Kaya

in effetti il tuo xorg.conf è vuoto e questo è strano..

No, non è affatto strano; intel è direttamente coinvolta nello sviluppo dei driver del kernel Linux per le sue schede grafiche, quindi queste sono essenzialmente plug and play: ciò significa che a meno di particolari esigenze - e non è questo il caso - il file xorg.conf non è necessario.

[Kaya]

prova con
dmesg |grep i915
e poi a creare il file xorg.conf e metterci

Section "Device"
   Identifier "Device0"
   Driver "intel"
EndSection

per ultimo dopo un riavvio prova con
sudo apt-get install --install-recommends xserver-xorg-hwe-18.04
sudo apt-get install xserver-xorg-video-intel

e facci sapere

[ander2712]

Originariamente inviato da Kaya

prova con
dmesg |grep i915
e poi a creare il file xorg.conf e metterci

Section "Device"
   Identifier "Device0"
   Driver "intel"
EndSection

Scusa ma in che cartella lo creo?

Originariamente inviato da Kaya

per ultimo dopo un riavvio prova con
sudo apt-get install --install-recommends xserver-xorg-hwe-18.04
sudo apt-get install xserver-xorg-video-intel

e facci sapere

questi li avevo gia provati ma ora li rilancio dopo il nuovo xorg.conf

[Kaya]

in /etc/xorg

mi verifichi anche cosa c'è in
/usr/share/X11/
?

[ander2712]

Originariamente inviato da Kaya

in /etc/xorg

mi verifichi anche cosa c'è in
/usr/share/X11/
?

non ho nessuna delle due cartelle

[Cosmo]

È un lapsus, voleva dire /etc/X11