Aiuto problema - no screen found(EE) e xinit: unable to connect to X server

[ander2712]

Salve,

ringrazio in anticipo chi può darmi una mano.
Stavo cercando di riesumare la tavoletta grafica con touchscreen integrata al mio lifebook T730 ma ho fatto più casino che altro :|
Il portatile mi rimane in modalità terminale e non parte il server grafico (ho provato a reinstallare e riconfigurare Xorg ma nada), digitando startx mi esce:


Ogni suggerimento è ben accetto, vorrei evitare di reinstallare ho un botto di SW configurato mannaggia a me!

[Kaya]

te lo dice chiaramente.
alla riga 1 del file ts.conf c'è un // che non è riconoscituo (hai messo un commento?)

verifica quel file

[ander2712]

Originariamente inviato da Kaya

te lo dice chiaramente.
alla riga 1 del file ts.conf c'è un // che non è riconoscituo (hai messo un commento?)

verifica quel file

ok ma il file risulta vuoto, ho provato a ripristinarlo usando QUESTO contenuto,
ora non si avvia nemmeno più in linea di comando ma si pianta al grub, va soltanto la recovery mode ...sento già che l'unica è piallare

[Kaya]

Ma no vai tranquillo che non c'è nulla di cui preoccuparsi.

A naso sembra manchi proprio la definizione dello schermo nel xorg.

Da remoto è difficile ma se riesci ancora ad andare in shell, vai con un
dpkg-reconfigure xserver-xorg

ovviamente prima stacca la tavoletta.
Dovrebbe rigenerarti lo xorg.conf
oppurre https://www.x.org/releases/X11R7.0/d...arting%20point.

[ander2712]

Originariamente inviato da Kaya

Ma no vai tranquillo che non c'è nulla di cui preoccuparsi.

A naso sembra manchi proprio la definizione dello schermo nel xorg.

Da remoto è difficile ma se riesci ancora ad andare in shell, vai con un
dpkg-reconfigure xserver-xorg

ovviamente prima stacca la tavoletta.
Dovrebbe rigenerarti lo xorg.conf
oppurre https://www.x.org/releases/X11R7.0/d...arting%20point.

Grazie, speriamo :|

il dpkg-reconfigure lo avevo già provato ma in una fase precedete allora l'ho rifatto ora e sembra essere andato a buon fine tant'è che ora mi esce lo splash screen che prima non vedovo ...ma solo in reboot (allo spegnimento), mentre all'avvio si pianta più avanti di prima ma si pianta sempre. Passando al terminale e lanciando startx ora il messaggio è cambiato:



P.S. la tavoletta non posso staccarla perchè è integrata nello schermo che è touch e pen...
P.S. 2 ho lanciato anche "echo $DISPLAY" ...è normale che la riga è vuota, senza numero?

[Kaya]

Recupera il file di log di xorg.
E in particolare dove ci sono gli EE che indicano gli errori.

[ander2712]

Originariamente inviato da Kaya

Recupera il file di log di xorg.
E in particolare dove ci sono gli EE che indicano gli errori.

Mi rendo conto che era meglio il testo copiato ma non sono riuscito a duplicare il log su una chiavetta da nano ...lo so è scandaloso

Ecco il contenuto completo di Xorg.0.log

[Kaya]

vedo svariati errori (le righe con EE)
per il modulo void:
https://stackoverflow.com/questions/...ad-module-void

Per il resto sembra proprio che ti manchino i driver
https://askubuntu.com/questions/9986...e-or-directory

[ander2712]

Intanto Kaya grazie per il tuo tempo, ho usato solo in parte i tuoi link e in sostanza non ci sono miglioramenti.
Il primo link da istruzioni per schede invidia ma sul mio c'è una semplice intel integrata.
Il secondo l'ho provato e diciamo che i comandi sembrano andare a buon fine, ma non cambia nulla

[Kaya]

Purtroppo a distanza è difficile..
io ti consiglierei di chiedere sul forum di ubuntu (mi sembra sai una ubunu?)

[Cosmo]

Ma quei driver per il touchscreen che hai trovato su github li hai installati?

[ander2712]

Originariamente inviato da Cosmo

Ma quei driver per il touchscreen che hai trovato su github li hai installati?

installati si, ma non credo funzionino...
...anzi molto probabile che siano stati quelli a farmi casino.

Diciamo che la procedura l'ho seguita e non mi ha restittuito errori,
poi al riavvio s'è piantato... comunque ora ho rimosso tutto ma non riparte uguale.

Potrebbe essere che è rimasto aperto qualcsa col comando vim oppure da qualche parte il server video/display punta ad un file vuoto o errato... boo

[Cosmo]

Sta leggendo il file ts.conf. Comincia con l'eliminare quello.

[ander2712]

Originariamente inviato da Cosmo

Sta leggendo il file ts.conf. Comincia con l'eliminare quello.

fatto

se il problema fosse su X11 e non su xorg, c'è un modo per ripristinare il contenuto della cartella X11 tipo prendendola da CD o da web?

[Cosmo]

Dentro la cartella /etc/X11 ci sono i file di configurazione di una decina di pacchetti, scopri quali sono e reinstallali, ma non credo sia quello il problema.
Ora che hai eliminato il file ts.conf, il file Xorg.0.log cosa dice?
Non fare altre tre foto, basta un
cat /var/log/Xorg.0 > /home/TUA_HOME/xorg.log
e poi caricalo da qualche parte

[ander2712]

Originariamente inviato da Cosmo

Dentro la cartella /etc/X11 ci sono i file di configurazione di una decina di pacchetti, scopri quali sono e reinstallali, ma non credo sia quello il problema.

ok provo a cercarli su un'altra macchina simile che ho

Originariamente inviato da Cosmo

Ora che hai eliminato il file ts.conf, il file Xorg.0.log cosa dice?

c'è un errore in più di prima mi pare

Originariamente inviato da Cosmo

Non fare altre tre foto, basta un
cat /var/log/Xorg.0 > /home/TUA_HOME/xorg.log
e poi caricalo da qualche parte

hai perfettamente ragione non lo faccio quasi mai da fastidio anche a me :|

Ecco il contenuto del log di Xorg che avevo fotografato all'inizio:

[ 143.640]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 143.789] Current Operating System: Linux lifeander-LIFEBOOK-T730 5.15.0-58-generic #64-Ubuntu SMP Thu Jan 5 11:43:13 UTC 2023 x86_64
[ 143.789] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic root=UUID=e5f8863a-e131-4229-99e2-e5a48f790d66 ro quiet splash nomodeset vt.handoff=7
[ 143.903] xorg-server 2:21.1.3-2ubuntu2.5 (For technical support please see http://www.ubuntu.com/support)
[ 143.903] Current version of pixman: 0.40.0
[ 143.903] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 143.903] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 143.903] (==) Log file: "/home/lifeander/.local/share/xorg/Xorg.0.log", Time: Sat Jan 14 19:52:36 2023
[ 143.903] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 143.903] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 143.904] (==) ServerLayout "Default Layout"
[ 143.904] (==) No screen section available. Using defaults.
[ 143.904] (**) |-->Screen "Default Screen Section" (0)
[ 143.904] (**) | |-->Monitor "<default monitor>"
[ 143.904] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 143.904] (**) |-->Input Device "touchscreen"
[ 143.904] (**) |-->Input Device "dummy"
[ 143.904] (==) Automatically adding devices
[ 143.904] (==) Automatically enabling devices
[ 143.904] (==) Automatically adding GPU devices
[ 143.904] (==) Automatically binding GPU devices
[ 143.904] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 143.904] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 143.904] Entry deleted from font path.
[ 143.904] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 143.904] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 143.904] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 143.904] (II) Loader magic: 0x55c34e484020
[ 143.904] (II) Module ABI versions:
[ 143.904] X.Org ANSI C Emulation: 0.4
[ 143.904] X.Org Video Driver: 25.2
[ 143.904] X.Org XInput driver : 24.4
[ 143.904] X.Org Server Extension : 10.0
[ 143.905] (++) using VT number 2

[ 143.908] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 143.912] (--) PCI:*(0@0:2:0) 8086:0046:10cf:1508 rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[ 143.912] (II) LoadModule: "glx"
[ 143.912] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 143.913] (II) Module glx: vendor="X.Org Foundation"
[ 143.913] compiled for 1.21.1.3, module version = 1.0.0
[ 143.913] ABI class: X.Org Server Extension, version 10.0
[ 143.913] (==) Matched modesetting as autoconfigured driver 0
[ 143.913] (==) Matched fbdev as autoconfigured driver 1
[ 143.913] (==) Matched vesa as autoconfigured driver 2
[ 143.913] (==) Assigned the driver to the xf86ConfigLayout
[ 143.913] (II) LoadModule: "modesetting"
[ 143.913] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 143.913] (II) Module modesetting: vendor="X.Org Foundation"
[ 143.913] compiled for 1.21.1.3, module version = 1.21.1
[ 143.913] Module class: X.Org Video Driver
[ 143.913] ABI class: X.Org Video Driver, version 25.2
[ 143.913] (II) LoadModule: "fbdev"
[ 143.914] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 143.914] (II) Module fbdev: vendor="X.Org Foundation"
[ 143.914] compiled for 1.21.1.3, module version = 0.5.0
[ 143.914] Module class: X.Org Video Driver
[ 143.914] ABI class: X.Org Video Driver, version 25.2
[ 143.914] (II) LoadModule: "vesa"
[ 143.914] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 143.914] (II) Module vesa: vendor="X.Org Foundation"
[ 143.914] compiled for 1.21.1.3, module version = 2.5.0
[ 143.914] Module class: X.Org Video Driver
[ 143.914] ABI class: X.Org Video Driver, version 25.2
[ 143.914] (II) LoadModule: "fujitsu"
[ 143.914] (WW) Warning, couldn't open module fujitsu
[ 143.914] (EE) Failed to load module "fujitsu" (module does not exist, 0)
[ 143.914] (II) LoadModule: "void"
[ 143.915] (WW) Warning, couldn't open module void
[ 143.915] (EE) Failed to load module "void" (module does not exist, 0)
[ 143.915] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 143.915] (II) FBDEV: driver for framebuffer: fbdev
[ 143.915] (II) VESA: driver for VESA chipsets: vesa
[ 143.915] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 143.915] (EE) open /dev/dri/card0: No such file or directory
[ 143.915] (WW) Falling back to old probe method for modesetting
[ 143.915] (EE) open /dev/dri/card0: No such file or directory
[ 143.915] (II) Loading sub module "fbdevhw"
[ 143.915] (II) LoadModule: "fbdevhw"
[ 143.916] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 143.916] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 143.916] compiled for 1.21.1.3, module version = 0.0.2
[ 143.916] ABI class: X.Org Video Driver, version 25.2
[ 143.916] (EE) Unable to find a valid framebuffer device
[ 143.916] (WW) Falling back to old probe method for fbdev
[ 143.916] (II) Loading sub module "fbdevhw"
[ 143.916] (II) LoadModule: "fbdevhw"
[ 143.916] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 143.916] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 143.916] compiled for 1.21.1.3, module version = 0.0.2
[ 143.916] ABI class: X.Org Video Driver, version 25.2
[ 143.916] (II) FBDEV(2): using default device
[ 143.916] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 143.916] (EE) Screen 0 deleted because of no matching config section.
[ 143.916] (II) UnloadModule: "modesetting"
[ 143.916] (EE) Screen 0 deleted because of no matching config section.
[ 143.916] (II) UnloadModule: "fbdev"
[ 143.917] (II) UnloadSubModule: "fbdevhw"
[ 143.917] (EE)
Fatal server error:
[ 143.917] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 143.917] (EE)
[ 143.917] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 143.917] (EE) Please also check the log file at "/home/lifeander/.local/share/xorg/Xorg.0.log" for additional information.
[ 143.917] (EE)
[ 144.145] (EE) Server terminated with error (1). Closing log file.

[Cosmo]

Io vorrei vederne uno nuovo

[ander2712]

Originariamente inviato da Cosmo

Io vorrei vederne uno nuovo

no scusa ho scritto male io, volevo dire che questa ultima versione ha ggli stessi (EE), comunque qui il log completo, mi pare un po incasinato e vedo che compare ancora la tavoletta seriale errata che mi ha fatto casino o sbaglio?!

[ 20.542]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 20.542] Current Operating System: Linux lifeander-LIFEBOOK-T730 6.1.0-1004-oem #4-Ubuntu SMP PREEMPT_DYNAMIC Wed Jan 4 15:26:53 UTC 2023 x86_64
[ 20.542] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-1004-oem root=UUID=e5f8863a-e131-4229-99e2-e5a48f790d66 ro recovery nomodeset dis_ucode_ldr
[ 20.542] xorg-server 2:21.1.3-2ubuntu2.5 (For technical support please see http://www.ubuntu.com/support)
[ 20.543] Current version of pixman: 0.40.0
[ 20.543] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.543] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.543] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 16 18:23:26 2023
[ 20.547] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.550] (==) No Layout section. Using the first Screen section.
[ 20.550] (==) No screen section available. Using defaults.
[ 20.550] (**) |-->Screen "Default Screen Section" (0)
[ 20.550] (**) | |-->Monitor "<default monitor>"
[ 20.551] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.551] (==) Automatically adding devices
[ 20.551] (==) Automatically enabling devices
[ 20.551] (==) Automatically adding GPU devices
[ 20.551] (==) Automatically binding GPU devices
[ 20.552] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 20.556] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 20.556] Entry deleted from font path.
[ 20.559] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 20.559] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.559] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.559] (II) Loader magic: 0x560f9abc1020
[ 20.559] (II) Module ABI versions:
[ 20.559] X.Org ANSI C Emulation: 0.4
[ 20.559] X.Org Video Driver: 25.2
[ 20.559] X.Org XInput driver : 24.4
[ 20.559] X.Org Server Extension : 10.0
[ 20.560] (++) using VT number 1

[ 20.708] (EE) systemd-logind: failed to get session: PID 5573 does not belong to any known session
[ 20.712] (--) PCI:*(0@0:2:0) 8086:0046:10cf:1508 rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[ 20.713] (II) LoadModule: "glx"
[ 20.713] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.725] (II) Module glx: vendor="X.Org Foundation"
[ 20.725] compiled for 1.21.1.3, module version = 1.0.0
[ 20.725] ABI class: X.Org Server Extension, version 10.0
[ 20.725] (==) Matched modesetting as autoconfigured driver 0
[ 20.725] (==) Matched fbdev as autoconfigured driver 1
[ 20.725] (==) Matched vesa as autoconfigured driver 2
[ 20.725] (==) Assigned the driver to the xf86ConfigLayout
[ 20.725] (II) LoadModule: "modesetting"
[ 20.727] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.728] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.728] compiled for 1.21.1.3, module version = 1.21.1
[ 20.728] Module class: X.Org Video Driver
[ 20.728] ABI class: X.Org Video Driver, version 25.2
[ 20.728] (II) LoadModule: "fbdev"
[ 20.729] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.729] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.729] compiled for 1.21.1.3, module version = 0.5.0
[ 20.729] Module class: X.Org Video Driver
[ 20.729] ABI class: X.Org Video Driver, version 25.2
[ 20.729] (II) LoadModule: "vesa"
[ 20.729] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.730] (II) Module vesa: vendor="X.Org Foundation"
[ 20.730] compiled for 1.21.1.3, module version = 2.5.0
[ 20.730] Module class: X.Org Video Driver
[ 20.730] ABI class: X.Org Video Driver, version 25.2
[ 20.730] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.730] (II) FBDEV: driver for framebuffer: fbdev
[ 20.730] (II) VESA: driver for VESA chipsets: vesa
[ 20.732] (EE) open /dev/dri/card0: No such file or directory
[ 20.732] (WW) Falling back to old probe method for modesetting
[ 20.732] (EE) open /dev/dri/card0: No such file or directory
[ 20.732] (II) Loading sub module "fbdevhw"
[ 20.732] (II) LoadModule: "fbdevhw"
[ 20.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.732] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.732] compiled for 1.21.1.3, module version = 0.0.2
[ 20.732] ABI class: X.Org Video Driver, version 25.2
[ 20.732] (EE) Unable to find a valid framebuffer device
[ 20.732] (WW) Falling back to old probe method for fbdev
[ 20.732] (II) Loading sub module "fbdevhw"
[ 20.732] (II) LoadModule: "fbdevhw"
[ 20.733] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.733] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.733] compiled for 1.21.1.3, module version = 0.0.2
[ 20.733] ABI class: X.Org Video Driver, version 25.2
[ 20.733] (EE) open /dev/fb0: No such file or directory
[ 20.733] (EE) Screen 0 deleted because of no matching config section.
[ 20.733] (II) UnloadModule: "modesetting"
[ 20.733] (EE) Screen 0 deleted because of no matching config section.
[ 20.733] (II) UnloadModule: "fbdev"
[ 20.733] (II) UnloadSubModule: "fbdevhw"
[ 20.733] (II) Loading sub module "vbe"
[ 20.733] (II) LoadModule: "vbe"
[ 20.733] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 20.734] (II) Module int10: vendor="X.Org Foundation"
[ 20.734] compiled for 1.21.1.3, module version = 1.0.0
[ 20.734] ABI class: X.Org Video Driver, version 25.2
[ 20.734] (II) Loading sub module "int10"
[ 20.734] (II) LoadModule: "int10"
[ 20.734] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 20.734] (II) Module int10: vendor="X.Org Foundation"
[ 20.734] compiled for 1.21.1.3, module version = 1.0.0
[ 20.734] ABI class: X.Org Video Driver, version 25.2
[ 20.734] (II) VESA(0): initializing int10
[ 20.735] (II) VESA(0): Bad V_BIOS checksum
[ 20.735] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 20.735] (II) VESA(0): VESA BIOS detected
[ 20.735] (II) VESA(0): VESA VBE Version 3.0
[ 20.735] (II) VESA(0): VESA VBE Total Mem: 32704 kB
[ 20.735] (II) VESA(0): VESA VBE OEM: Intel(R)Ironlake Mobile Graphics Chipset Accelerated VGA BIOS
[ 20.735] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 20.735] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 20.735] (II) VESA(0): VESA VBE OEM Product: Intel(R)Ironlake Mobile Graphics Controller
[ 20.735] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 20.741] (II) VESA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.741] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[ 20.741] (==) VESA(0): RGB weight 888
[ 20.741] (==) VESA(0): Default visual is TrueColor
[ 20.741] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.741] (II) Loading sub module "ddc"
[ 20.741] (II) LoadModule: "ddc"
[ 20.741] (II) Module "ddc" already built-in
[ 20.742] (II) VESA(0): VESA VBE DDC supported
[ 20.742] (II) VESA(0): VESA VBE DDC Level 2
[ 20.742] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[ 20.754] (II) VESA(0): VESA VBE DDC read successfully
[ 20.754] (II) VESA(0): Manufacturer: SEC Model: 3942 Serial#: 0
[ 20.754] (II) VESA(0): Year: 2008 Week: 0
[ 20.754] (II) VESA(0): EDID Version: 1.3
[ 20.754] (II) VESA(0): Digital Display Input
[ 20.754] (II) VESA(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 20.754] (II) VESA(0): Gamma: 2.20
[ 20.754] (II) VESA(0): No DPMS capabilities specified
[ 20.754] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.754] (II) VESA(0): First detailed timing is preferred mode
[ 20.754] (II) VESA(0): redX: 0.558 redY: 0.336 greenX: 0.356 greenY: 0.594
[ 20.754] (II) VESA(0): blueX: 0.146 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
[ 20.754] (II) VESA(0): Manufacturer's mask: 0
[ 20.754] (II) VESA(0): Supported detailed timing:
[ 20.754] (II) VESA(0): clock: 69.3 MHz Image Size: 261 x 163 mm
[ 20.754] (II) VESA(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1353 h_border: 0
[ 20.754] (II) VESA(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 854 v_border: 0
[ 20.754] (II) VESA(0): Unknown vendor-specific block f
[ 20.754] (II) VESA(0): SAMSUNG
[ 20.754] (II) VESA(0): 121AT09-F01
[ 20.754] (II) VESA(0): EDID (in hex):
[ 20.754] (II) VESA(0): 00ffffffffffff004ca3423900000000
[ 20.754] (II) VESA(0): 00120103801a10780ac4858e565b9825
[ 20.754] (II) VESA(0): 1a505400000001010101010101010101
[ 20.754] (II) VESA(0): 010101010101121b0049502036301030
[ 20.754] (II) VESA(0): 130005a3100000190000000f00000000
[ 20.754] (II) VESA(0): 00000000002387026400000000fe0053
[ 20.754] (II) VESA(0): 414d53554e470a2020202020000000fe
[ 20.754] (II) VESA(0): 00313231415430392d4630310a200064
[ 20.754] (II) VESA(0): EDID vendor "SEC", prod id 14658
[ 20.754] (II) VESA(0): Printing DDC gathered Modelines:
[ 20.754] (II) VESA(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1353 800 801 804 854 -hsync -vsync (51.2 kHz eP)
[ 20.754] (II) VESA(0): Searching for matching VESA mode(s):
[...]
[ 20.770] (II) VESA(0): Total Memory: 511 64KB banks (32704kB)
[ 20.770] (II) VESA(0): <default monitor>: Using hsync value of 51.22 kHz
[ 20.770] (II) VESA(0): <default monitor>: Using vrefresh value of 59.98 Hz
[ 20.770] (WW) VESA(0): Unable to estimate virtual size
[ 20.770] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[ 20.770] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[ 20.770] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[ 20.770] (WW) VESA(0): No valid modes left. Trying less strict filter...
[ 20.770] (II) VESA(0): <default monitor>: Using hsync value of 51.22 kHz
[ 20.770] (II) VESA(0): <default monitor>: Using vrefresh value of 59.98 Hz
[ 20.770] (WW) VESA(0): Unable to estimate virtual size
[ 20.770] (II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
[ 20.770] (II) VESA(0): Not using built-in mode "800x600" (hsync out of range)
[ 20.770] (II) VESA(0): Not using built-in mode "640x480" (hsync out of range)
[ 20.770] (WW) VESA(0): No valid modes left. Trying aggressive sync range...
[ 20.770] (II) VESA(0): <default monitor>: Using hsync range of 31.50-51.22 kHz
[ 20.770] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-59.98 Hz
[ 20.770] (WW) VESA(0): Unable to estimate virtual size
[ 20.770] (II) VESA(0): Not using built-in mode "640x480" (hsync out of range)
[ 20.770] (II) VESA(0): Virtual size is 1024x768 (pitch 1024)
[ 20.770] (**) VESA(0): *Built-in mode "1024x768"
[ 20.770] (**) VESA(0): *Built-in mode "800x600"
[ 20.770] (**) VESA(0): Display dimensions: (260, 160) mm
[ 20.770] (**) VESA(0): DPI set to (100, 121)
[ 20.770] (**) VESA(0): Using "Shadow Framebuffer"
[ 20.770] (II) Loading sub module "shadow"
[ 20.770] (II) LoadModule: "shadow"
[ 20.770] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 20.771] (II) Module shadow: vendor="X.Org Foundation"
[ 20.771] compiled for 1.21.1.3, module version = 1.1.0
[ 20.771] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.771] (II) Loading sub module "fb"
[ 20.771] (II) LoadModule: "fb"
[ 20.771] (II) Module "fb" already built-in
[ 20.771] (II) Loading sub module "int10"
[ 20.771] (II) LoadModule: "int10"
[ 20.771] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 20.771] (II) Module int10: vendor="X.Org Foundation"
[ 20.771] compiled for 1.21.1.3, module version = 1.0.0
[ 20.771] ABI class: X.Org Video Driver, version 25.2
[ 20.771] (II) VESA(0): initializing int10
[ 20.771] (II) VESA(0): Bad V_BIOS checksum
[ 20.771] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 20.771] (II) VESA(0): VESA BIOS detected
[ 20.771] (II) VESA(0): VESA VBE Version 3.0
[ 20.771] (II) VESA(0): VESA VBE Total Mem: 32704 kB
[ 20.771] (II) VESA(0): VESA VBE OEM: Intel(R)Ironlake Mobile Graphics Chipset Accelerated VGA BIOS
[ 20.771] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 20.771] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 20.771] (II) VESA(0): VESA VBE OEM Product: Intel(R)Ironlake Mobile Graphics Controller
[ 20.771] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 20.772] (II) VESA(0): virtual address = 0x7f177e6b5000, VGAbase = 0x7f17807d1000
physical address = 0xd0000000, size = 33488896
[ 20.781] (II) VESA(0): Setting up VESA Mode 0x118 (1024x768)
[ 20.840] (==) VESA(0): Default visual is TrueColor
[ 20.844] (==) VESA(0): Backing store enabled
[ 20.844] (==) VESA(0): DPMS enabled
[ 20.845] (II) Initializing extension Generic Event Extension
[ 20.845] (II) Initializing extension SHAPE
[ 20.845] (II) Initializing extension MIT-SHM
[ 20.845] (II) Initializing extension XInputExtension
[ 20.846] (II) Initializing extension XTEST
[ 20.846] (II) Initializing extension BIG-REQUESTS
[ 20.846] (II) Initializing extension SYNC
[ 20.846] (II) Initializing extension XKEYBOARD
[ 20.846] (II) Initializing extension XC-MISC
[ 20.846] (II) Initializing extension SECURITY
[ 20.847] (II) Initializing extension XFIXES
[ 20.847] (II) Initializing extension RENDER
[ 20.847] (II) Initializing extension RANDR
[ 20.847] (II) Initializing extension COMPOSITE
[ 20.847] (II) Initializing extension DAMAGE
[ 20.847] (II) Initializing extension MIT-SCREEN-SAVER
[ 20.847] (II) Initializing extension DOUBLE-BUFFER
[ 20.848] (II) Initializing extension RECORD
[ 20.848] (II) Initializing extension DPMS
[ 20.848] (II) Initializing extension Present
[ 20.848] (II) Initializing extension DRI3
[ 20.848] (II) Initializing extension X-Resource
[ 20.848] (II) Initializing extension XVideo
[ 20.848] (II) Initializing extension XVideo-MotionCompensation
[ 20.848] (II) Initializing extension SELinux
[ 20.848] (II) SELinux: Disabled on system
[ 20.848] (II) Initializing extension GLX
[ 20.848] (II) AIGLX: Screen 0 is not DRI2 capable
[ 21.165] (II) IGLX: Loaded and initialized swrast
[ 21.165] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 21.165] (II) Initializing extension XFree86-VidModeExtension
[ 21.165] (II) Initializing extension XFree86-DGA
[ 21.165] (II) Initializing extension XFree86-DRI
[ 21.165] (II) Initializing extension DRI2
[ 21.252] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.252] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.252] (II) LoadModule: "libinput"
[ 21.252] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.257] (II) Module libinput: vendor="X.Org Foundation"
[ 21.257] compiled for 1.20.14, module version = 1.2.1
[ 21.257] Module class: X.Org XInput Driver
[ 21.257] ABI class: X.Org XInput driver, version 24.1
[ 21.257] (II) Using input driver 'libinput' for 'Power Button'
[ 21.257] (**) Power Button: always reports core events
[ 21.257] (**) Option "Device" "/dev/input/event3"
[ 21.268] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.268] (II) event3 - Power Button: device is a keyboard
[ 21.268] (II) event3 - Power Button: device removed
[ 21.303] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.303] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.303] (**) Option "xkb_model" "pc105"
[ 21.303] (**) Option "xkb_layout" "it"
[ 21.327] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.327] (II) event3 - Power Button: device is a keyboard
[ 21.328] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event8)
[ 21.328] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 21.328] (**) Fujitsu FUJ02E3: Applying InputClass "libinput keyboard catchall"
[ 21.328] (II) Using input driver 'libinput' for 'Fujitsu FUJ02E3'
[ 21.328] (**) Fujitsu FUJ02E3: always reports core events
[ 21.328] (**) Option "Device" "/dev/input/event8"
[ 21.329] (II) event8 - Fujitsu FUJ02E3: is tagged by udev as: Keyboard
[ 21.329] (II) event8 - Fujitsu FUJ02E3: device is a keyboard
[ 21.329] (II) event8 - Fujitsu FUJ02E3: device removed
[ 21.347] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input15/event8"
[ 21.347] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 21.347] (**) Option "xkb_model" "pc105"
[ 21.347] (**) Option "xkb_layout" "it"
[ 21.348] (II) event8 - Fujitsu FUJ02E3: is tagged by udev as: Keyboard
[ 21.348] (II) event8 - Fujitsu FUJ02E3: device is a keyboard
[ 21.349] (II) config/udev: Adding input device Fujitsu FUJ02BF (/dev/input/event7)
[ 21.349] (**) Fujitsu FUJ02BF: Applying InputClass "evdev keyboard catchall"
[ 21.349] (**) Fujitsu FUJ02BF: Applying InputClass "libinput keyboard catchall"
[ 21.349] (II) Using input driver 'libinput' for 'Fujitsu FUJ02BF'
[ 21.349] (**) Fujitsu FUJ02BF: always reports core events
[ 21.349] (**) Option "Device" "/dev/input/event7"
[ 21.350] (II) event7 - Fujitsu FUJ02BF: is tagged by udev as: Keyboard Switch
[ 21.350] (II) event7 - Fujitsu FUJ02BF: device is a keyboard
[ 21.350] (II) event7 - Fujitsu FUJ02BF: device is a switch device
[ 21.350] (II) event7 - Fujitsu FUJ02BF: device removed
[ 21.363] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/FUJ02BF:00/input/input14/event7"
[ 21.363] (II) XINPUT: Adding extended input device "Fujitsu FUJ02BF" (type: KEYBOARD, id 8)
[ 21.363] (**) Option "xkb_model" "pc105"
[ 21.363] (**) Option "xkb_layout" "it"
[ 21.364] (II) event7 - Fujitsu FUJ02BF: is tagged by udev as: Keyboard Switch
[ 21.364] (II) event7 - Fujitsu FUJ02BF: device is a keyboard
[ 21.364] (II) event7 - Fujitsu FUJ02BF: device is a switch device
[ 21.365] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 21.365] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.365] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.365] (II) Using input driver 'libinput' for 'Power Button'
[ 21.365] (**) Power Button: always reports core events
[ 21.365] (**) Option "Device" "/dev/input/event1"
[ 21.366] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 21.366] (II) event1 - Power Button: device is a keyboard
[ 21.366] (II) event1 - Power Button: device removed
[ 21.379] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 21.379] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 21.379] (**) Option "xkb_model" "pc105"
[ 21.379] (**) Option "xkb_layout" "it"
[ 21.380] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 21.380] (II) event1 - Power Button: device is a keyboard
[ 21.381] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 21.381] (II) No input driver specified, ignoring this device.
[ 21.381] (II) This device may have been added with another device file.
[ 21.381] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 21.381] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.381] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 21.381] (II) Using input driver 'libinput' for 'Sleep Button'
[ 21.381] (**) Sleep Button: always reports core events
[ 21.381] (**) Option "Device" "/dev/input/event2"
[ 21.382] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 21.382] (II) event2 - Sleep Button: device is a keyboard
[ 21.382] (II) event2 - Sleep Button: device removed
[ 21.395] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 21.395] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 21.395] (**) Option "xkb_model" "pc105"
[ 21.395] (**) Option "xkb_layout" "it"
[ 21.396] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 21.396] (II) event2 - Sleep Button: device is a keyboard
[ 21.397] (II) config/udev: Adding input device Mitsumi Electric Apple Optical USB Mouse (/dev/input/event5)
[ 21.397] (**) Mitsumi Electric Apple Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 21.397] (**) Mitsumi Electric Apple Optical USB Mouse: Applying InputClass "libinput pointer catchall"
[ 21.397] (II) Using input driver 'libinput' for 'Mitsumi Electric Apple Optical USB Mouse'
[ 21.397] (**) Mitsumi Electric Apple Optical USB Mouse: always reports core events
[ 21.397] (**) Option "Device" "/dev/input/event5"
[ 21.457] (II) event5 - Mitsumi Electric Apple Optical USB Mouse: is tagged by udev as: Mouse
[ 21.458] (II) event5 - Mitsumi Electric Apple Optical USB Mouse: device is a pointer
[ 21.458] (II) event5 - Mitsumi Electric Apple Optical USB Mouse: device removed
[ 21.487] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:0304.0001/input/input13/event5"
[ 21.487] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Optical USB Mouse" (type: MOUSE, id 11)
[ 21.487] (**) Option "AccelerationScheme" "none"
[ 21.487] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) selected scheme none/0
[ 21.487] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) acceleration factor: 2.000
[ 21.487] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) acceleration threshold: 4
[ 21.549] (II) event5 - Mitsumi Electric Apple Optical USB Mouse: is tagged by udev as: Mouse
[ 21.550] (II) event5 - Mitsumi Electric Apple Optical USB Mouse: device is a pointer
[ 21.552] (II) config/udev: Adding input device Mitsumi Electric Apple Optical USB Mouse (/dev/input/mouse0)
[ 21.552] (II) No input driver specified, ignoring this device.
[ 21.552] (II) This device may have been added with another device file.
[ 21.555] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 21.555] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.555] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.555] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.555] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.555] (**) Option "Device" "/dev/input/event4"
[ 21.557] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.557] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.559] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 21.579] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 21.579] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 21.579] (**) Option "xkb_model" "pc105"
[ 21.579] (**) Option "xkb_layout" "it"
[ 21.581] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.581] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.584] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 21.584] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 21.584] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[ 21.584] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Multitouch Touchpad"
[ 21.584] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 21.584] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 21.584] (II) LoadModule: "synaptics"
[ 21.585] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 21.587] (II) Module synaptics: vendor="X.Org Foundation"
[ 21.587] compiled for 1.20.8, module version = 1.9.1
[ 21.587] Module class: X.Org XInput Driver
[ 21.587] ABI class: X.Org XInput driver, version 24.1
[ 21.587] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 21.587] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 21.587] (**) Option "Device" "/dev/input/event6"
[ 21.623] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000 (res 0)
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400 (res 0)
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 21.623] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 21.623] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 21.623] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 21.655] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event6"
[ 21.655] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[ 21.655] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 21.655] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 21.655] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.082
[ 21.655] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 21.655] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 21.655] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 21.655] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 21.655] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 21.656] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 21.656] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 21.663] (II) config/udev: Adding input device Serial Wacom Tablet FUJ02e7 (/dev/ttyS4)
[ 21.663] (**) Serial Wacom Tablet FUJ02e7: Applying InputClass "Wacom serial class"
[ 21.663] (**) Serial Wacom Tablet FUJ02e7: Applying InputClass "Wacom serial class identifiers"
[ 21.663] (II) LoadModule: "wacom"
[ 21.664] (WW) Warning, couldn't open module wacom
[ 21.664] (EE) Failed to load module "wacom" (module does not exist, 0)
[ 21.664] (EE) No input driver matching `wacom'
[ 21.664] (II) Falling back to input driver `libinput'
[ 21.664] (II) Using input driver 'libinput' for 'Serial Wacom Tablet FUJ02e7'
[ 21.664] (**) Serial Wacom Tablet FUJ02e7: always reports core events
[ 21.664] (**) Option "Device" "/dev/ttyS4"

[Cosmo]

Ci fai leggere anche questo?

/home/lifeander/.local/share/xorg/Xorg.0.log

[ander2712]

Originariamente inviato da Cosmo

Ci fai leggere anche questo?

/home/lifeander/.local/share/xorg/Xorg.0.log

Eccolo:

[ 57.492]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 57.496] Current Operating System: Linux lifeander-LIFEBOOK-T730 6.1.0-1004-oem #4-Ubuntu SMP PREEMPT_DYNAMIC Wed Jan 4 15:26:53 UTC 2023 x86_64
[ 57.496] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-1004-oem root=UUID=e5f8863a-e131-4229-99e2-e5a48f790d66 ro quiet splash nomodeset vt.handoff=7
[ 57.501] xorg-server 2:21.1.3-2ubuntu2.5 (For technical support please see http://www.ubuntu.com/support)
[ 57.502] Current version of pixman: 0.40.0
[ 57.504] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 57.504] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 57.510] (==) Log file: "/home/lifeander/.local/share/xorg/Xorg.0.log", Time: Mon Jan 16 20:40:17 2023
[ 57.511] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 57.512] (==) No Layout section. Using the first Screen section.
[ 57.512] (==) No screen section available. Using defaults.
[ 57.512] (**) |-->Screen "Default Screen Section" (0)
[ 57.512] (**) | |-->Monitor "<default monitor>"
[ 57.512] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.512] (==) Automatically adding devices
[ 57.512] (==) Automatically enabling devices
[ 57.512] (==) Automatically adding GPU devices
[ 57.512] (==) Automatically binding GPU devices
[ 57.512] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 57.512] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 57.512] Entry deleted from font path.
[ 57.512] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 57.512] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 57.512] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.512] (II) Loader magic: 0x56385f7c6020
[ 57.512] (II) Module ABI versions:
[ 57.512] X.Org ANSI C Emulation: 0.4
[ 57.512] X.Org Video Driver: 25.2
[ 57.512] X.Org XInput driver : 24.4
[ 57.512] X.Org Server Extension : 10.0
[ 57.513] (++) using VT number 1

[ 57.515] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 57.519] (--) PCI:*(0@0:2:0) 8086:0046:10cf:1508 rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[ 57.519] (II) LoadModule: "glx"
[ 57.519] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 57.521] (II) Module glx: vendor="X.Org Foundation"
[ 57.521] compiled for 1.21.1.3, module version = 1.0.0
[ 57.521] ABI class: X.Org Server Extension, version 10.0
[ 57.521] (==) Matched modesetting as autoconfigured driver 0
[ 57.521] (==) Matched fbdev as autoconfigured driver 1
[ 57.521] (==) Matched vesa as autoconfigured driver 2
[ 57.521] (==) Assigned the driver to the xf86ConfigLayout
[ 57.521] (II) LoadModule: "modesetting"
[ 57.521] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 57.521] (II) Module modesetting: vendor="X.Org Foundation"
[ 57.521] compiled for 1.21.1.3, module version = 1.21.1
[ 57.521] Module class: X.Org Video Driver
[ 57.521] ABI class: X.Org Video Driver, version 25.2
[ 57.521] (II) LoadModule: "fbdev"
[ 57.521] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 57.522] (II) Module fbdev: vendor="X.Org Foundation"
[ 57.522] compiled for 1.21.1.3, module version = 0.5.0
[ 57.522] Module class: X.Org Video Driver
[ 57.522] ABI class: X.Org Video Driver, version 25.2
[ 57.522] (II) LoadModule: "vesa"
[ 57.522] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 57.522] (II) Module vesa: vendor="X.Org Foundation"
[ 57.522] compiled for 1.21.1.3, module version = 2.5.0
[ 57.522] Module class: X.Org Video Driver
[ 57.522] ABI class: X.Org Video Driver, version 25.2
[ 57.522] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 57.522] (II) FBDEV: driver for framebuffer: fbdev
[ 57.522] (II) VESA: driver for VESA chipsets: vesa
[ 57.522] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 57.522] (EE) open /dev/dri/card0: No such file or directory
[ 57.522] (WW) Falling back to old probe method for modesetting
[ 57.522] (EE) open /dev/dri/card0: No such file or directory
[ 57.522] (II) Loading sub module "fbdevhw"
[ 57.522] (II) LoadModule: "fbdevhw"
[ 57.522] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 57.523] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 57.523] compiled for 1.21.1.3, module version = 0.0.2
[ 57.523] ABI class: X.Org Video Driver, version 25.2
[ 57.523] (EE) Unable to find a valid framebuffer device
[ 57.523] (WW) Falling back to old probe method for fbdev
[ 57.523] (II) Loading sub module "fbdevhw"
[ 57.523] (II) LoadModule: "fbdevhw"
[ 57.523] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 57.523] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 57.523] compiled for 1.21.1.3, module version = 0.0.2
[ 57.523] ABI class: X.Org Video Driver, version 25.2
[ 57.523] (II) FBDEV(2): using default device
[ 57.523] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 57.523] (EE) Screen 0 deleted because of no matching config section.
[ 57.523] (II) UnloadModule: "modesetting"
[ 57.523] (EE) Screen 0 deleted because of no matching config section.
[ 57.523] (II) UnloadModule: "fbdev"
[ 57.523] (II) UnloadSubModule: "fbdevhw"
[ 57.523] (EE)
Fatal server error:
[ 57.523] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 57.523] (EE)
[ 57.523] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 57.523] (EE) Please also check the log file at "/home/lifeander/.local/share/xorg/Xorg.0.log" for additional information.
[ 57.523] (EE)
[ 57.639] (EE) Server terminated with error (1). Closing log file.