Out of range

DigitalKiller · 03-07-2005, 12:34

Questa mattina è sorto questo problema....

La settimana scorsa ho installato i driver ATI (ho una sapphire 9200 SE). Per qualche giorno tutto ok, poi oggi in fase di avvio, subito dopo il menu di grub mi compare questa scritta .

Il monitor resta nero per tutta la fase di avvio finchè non arriva al login
Che devo fare?

XF86Config-4

Codice:

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   24-80
    VertRefresh 56-75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=5964
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        Modes       "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

XFree86.0.log

Codice:

(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jul  3 13:22:11 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80008d48, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1043,807f rev 80 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10b7,1700 card 1043,80eb rev 12 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1043,80ed rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,80b0 rev 60 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5964 card 174b,7c26 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5d44 card 174b,7c27 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xd7000000 - 0xd7ffffff (0x1000000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd8000000 - 0xefffffff (0x18000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1, Mem @ 0xe8000000/27, 0xd7800000/16, I/O @ 0xd800/8, BIOS @ 0xe7fe0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5d44) rev 1, Mem @ 0xd8000000/27, 0xd7000000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xd6000000 - 0xd60000ff (0x100) MX[b]
	[1] -1	0	0xd6800000 - 0xd6803fff (0x4000) MX[b]
	[2] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[3] -1	0	0xd7000000 - 0xd700ffff (0x10000) MX[b](B)
	[4] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[5] -1	0	0xe7fe0000 - 0xe7ffffff (0x20000) MX[b](B)
	[6] -1	0	0xd7800000 - 0xd780ffff (0x10000) MX[b](B)
	[7] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[8] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[9] -1	0	0x00008000 - 0x0000801f (0x20) IX[b]
	[10] -1	0	0x00008400 - 0x0000841f (0x20) IX[b]
	[11] -1	0	0x00008800 - 0x0000881f (0x20) IX[b]
	[12] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[13] -1	0	0x00009400 - 0x0000940f (0x10) IX[b]
	[14] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[15] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[16] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[b]
	[17] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[b]
	[18] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[19] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[20] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[21] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xd6000000 - 0xd60000ff (0x100) MX[b]
	[1] -1	0	0xd6800000 - 0xd6803fff (0x4000) MX[b]
	[2] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[3] -1	0	0xd7000000 - 0xd700ffff (0x10000) MX[b](B)
	[4] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[5] -1	0	0xe7fe0000 - 0xe7ffffff (0x20000) MX[b](B)
	[6] -1	0	0xd7800000 - 0xd780ffff (0x10000) MX[b](B)
	[7] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[8] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[9] -1	0	0x00008000 - 0x0000801f (0x20) IX[b]
	[10] -1	0	0x00008400 - 0x0000841f (0x20) IX[b]
	[11] -1	0	0x00008800 - 0x0000881f (0x20) IX[b]
	[12] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[13] -1	0	0x00009400 - 0x0000940f (0x10) IX[b]
	[14] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[15] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[16] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[b]
	[17] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[b]
	[18] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[19] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[20] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[21] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0xd6000000 - 0xd60000ff (0x100) MX[b]
	[6] -1	0	0xd6800000 - 0xd6803fff (0x4000) MX[b]
	[7] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[8] -1	0	0xd7000000 - 0xd700ffff (0x10000) MX[b](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[10] -1	0	0xe7fe0000 - 0xe7ffffff (0x20000) MX[b](B)
	[11] -1	0	0xd7800000 - 0xd780ffff (0x10000) MX[b](B)
	[12] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[15] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[16] -1	0	0x00008000 - 0x0000801f (0x20) IX[b]
	[17] -1	0	0x00008400 - 0x0000841f (0x20) IX[b]
	[18] -1	0	0x00008800 - 0x0000881f (0x20) IX[b]
	[19] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[20] -1	0	0x00009400 - 0x0000940f (0x10) IX[b]
	[21] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[22] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[23] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[b]
	[24] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[b]
	[25] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[26] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[27] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[28] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.0.1, module version = 8.14.13
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
	RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
	MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
	RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
	RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
	RADEON X850 XT Platinum Edition (R480 5D4D),
	RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
	MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
	FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
	RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
	RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
	RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
	MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9200 SE (RV280 5964) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0xd6000000 - 0xd60000ff (0x100) MX[b]
	[6] -1	0	0xd6800000 - 0xd6803fff (0x4000) MX[b]
	[7] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[8] -1	0	0xd7000000 - 0xd700ffff (0x10000) MX[b](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[10] -1	0	0xe7fe0000 - 0xe7ffffff (0x20000) MX[b](B)
	[11] -1	0	0xd7800000 - 0xd780ffff (0x10000) MX[b](B)
	[12] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[15] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[16] -1	0	0x00008000 - 0x0000801f (0x20) IX[b]
	[17] -1	0	0x00008400 - 0x0000841f (0x20) IX[b]
	[18] -1	0	0x00008800 - 0x0000881f (0x20) IX[b]
	[19] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[20] -1	0	0x00009400 - 0x0000940f (0x10) IX[b]
	[21] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[22] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[23] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[b]
	[24] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[b]
	[25] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[26] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[27] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[28] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x820b258
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0xd6000000 - 0xd60000ff (0x100) MX[b]
	[6] -1	0	0xd6800000 - 0xd6803fff (0x4000) MX[b]
	[7] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[8] -1	0	0xd7000000 - 0xd700ffff (0x10000) MX[b](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[10] -1	0	0xe7fe0000 - 0xe7ffffff (0x20000) MX[b](B)
	[11] -1	0	0xd7800000 - 0xd780ffff (0x10000) MX[b](B)
	[12] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[13] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[14] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[15] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[18] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[19] -1	0	0x00008000 - 0x0000801f (0x20) IX[b]
	[20] -1	0	0x00008400 - 0x0000841f (0x20) IX[b]
	[21] -1	0	0x00008800 - 0x0000881f (0x20) IX[b]
	[22] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[23] -1	0	0x00009400 - 0x0000940f (0x10) IX[b]
	[24] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[25] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[26] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[b]
	[27] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[b]
	[28] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[29] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[30] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[31] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b](B)
	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 SE (RV280 5964)" (Chipset = 0x5964)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c26)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xd7800000
(--) fglrx(0): ROM-BIOS at 0xe7fe0000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS -------- 
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option: 
	Monitor1--Type AUTO, Monitor2--Type AUTO

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
 Monitor   -- NONE
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- NONE
(II) fglrx(0): Secondary head:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: ABO  Model: 6700  Serial#: 1278
(II) fglrx(0): Year: 2002  Week: 43
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.643 redY: 0.344   greenX: 0.299 greenY: 0.588
(II) fglrx(0): blueX: 0.143 blueY: 0.105   whiteX: 0.312 whiteY: 0.334
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 24  H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: Acer AL722
(II) fglrx(0): Serial No: ET709243004FE
(II) fglrx(0): 
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total 5 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) fglrx(0): *Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) fglrx(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) fglrx(0):  Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) fglrx(0): *Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) fglrx(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.0.1, module version = 8.14.13
	ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x000006a4
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd7800000 - 0xd780ffff (0x10000) MX[b]
	[1] 0	0	0xe8000000 - 0xefffffff (0x8000000) MX[b]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[7] -1	0	0xd6000000 - 0xd60000ff (0x100) MX[b]
	[8] -1	0	0xd6800000 - 0xd6803fff (0x4000) MX[b]
	[9] -1	0	0xf0000000 - 0xefffffff (0x0) MX[b]O
	[10] -1	0	0xd7000000 - 0xd700ffff (0x10000) MX[b](B)
	[11] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[12] -1	0	0xe7fe0000 - 0xe7ffffff (0x20000) MX[b](B)
	[13] -1	0	0xd7800000 - 0xd780ffff (0x10000) MX[b](B)
	[14] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[18] 0	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[21] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[22] -1	0	0x00008000 - 0x0000801f (0x20) IX[b]
	[23] -1	0	0x00008400 - 0x0000841f (0x20) IX[b]
	[24] -1	0	0x00008800 - 0x0000881f (0x20) IX[b]
	[25] -1	0	0x00009000 - 0x0000901f (0x20) IX[b]
	[26] -1	0	0x00009400 - 0x0000940f (0x10) IX[b]
	[27] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[28] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[29] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[b]
	[30] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[b]
	[31] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[32] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[33] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[34] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b](B)
	[35] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[36] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) fglrx(0): UMM area:     0xe8701000 (size=0x078ff000)
(II) fglrx(0): driver needs XFree86 4.3.x
(II) fglrx(0): detected XFree86 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0a24000
(II) fglrx(0): [drm] mapped SAREA 0xe0a24000 to 0x4025a000
(II) fglrx(0): [drm] framebuffer handle = 0xe8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.14.13
(II) fglrx(0):     Date: Jun  8 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.8-2-386
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xd7800000
(II) fglrx(0): [agp] Mode=0x1f000a0f bridge: 0x1106/0x3189
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000b0e
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000302)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe8dd5000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
GetModeLine - scrn: 0 clock: 135000
GetModeLine - hdsp: 1280 hbeg: 1296 hend: 1440 httl: 1688
              vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
GetModeLine - scrn: 0 clock: 135000
GetModeLine - hdsp: 1280 hbeg: 1296 hend: 1440 httl: 1688
              vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5

DigitalKiller · 03-07-2005, 18:43

Up!

Prima di installare i driver ATI ho fatto una copia dell'XF86Config-4. Posso ripristinarlo e tentare di riconfigurare i driver ATI?

DigitalKiller · 04-07-2005, 09:04

Gavrila · 04-07-2005, 10:17

Quote:

Originariamente inviato da DigitalKiller

Up!

Prima di installare i driver ATI ho fatto una copia dell'XF86Config-4. Posso ripristinarlo e tentare di riconfigurare i driver ATI?

qualche dettaglio in piu'? distribuzione? come li hai installati? cmq in linea di massima si'.

DigitalKiller · 04-07-2005, 10:54

Ops...hai ragione, ho dimenticato alcune cose...
Ho una debian sid, fresca di installazione. Per i driver ATI ho seguito questo 3d:
http://www.debianitalia.org/modules/...er=ASC&start=0
Il problema è sorto all'improvviso, da un giorno all'altro senza che io abbia modificato nulla nella configurazione.

Gavrila · 04-07-2005, 12:26

Quote:

Originariamente inviato da DigitalKiller

Ops...hai ragione, ho dimenticato alcune cose...
Ho una debian sid, fresca di installazione. Per i driver ATI ho seguito questo 3d:
http://www.debianitalia.org/modules/...er=ASC&start=0
Il problema è sorto all'improvviso, da un giorno all'altro senza che io abbia modificato nulla nella configurazione.

la linea di comando riesci a visualizzarla? (passa come parametro al boot 'single').
In ogni caso salvati il tuo xorg.conf e poi ripristina quello vecchio e vedi se cambia qualcosa... in ogni caso potrebbe essere stato un qualche aggiornamento. Avevi mica fatto un dist-upgrade prima?

Inoltre io dico: se non hai fatto nulla ed e' stato solo cosi' improvviso... non sara' mica il tuo monitor che e' morto(almeno a quella risoluzione/frequenza) ?

DigitalKiller · 04-07-2005, 13:47

Quote:

Originariamente inviato da Gavrila

la linea di comando riesci a visualizzarla? (passa come parametro al boot 'single').
In ogni caso salvati il tuo xorg.conf e poi ripristina quello vecchio e vedi se cambia qualcosa... in ogni caso potrebbe essere stato un qualche aggiornamento. Avevi mica fatto un dist-upgrade prima?

Inoltre io dico: se non hai fatto nulla ed e' stato solo cosi' improvviso... non sara' mica il tuo monitor che e' morto(almeno a quella risoluzione/frequenza) ?

Se ti riferisci alla linea di comando di grub si, riesco a visualizzarla. Il monitor funziona perfettamente. Riesco ad entrare nel bios ed anche la fase di avvio di windows xp viene visualizzata. Prima di spegnerlo (quando ancora funzionava) ho lanciato un dist-upgrade ed ho installato questi aggiornamenti:

Codice:

eject (2.0.13deb-12) to 2.0.13deb-13
grep (2.5.1.ds1-4) to 2.5.1.ds1-5
hal (0.4.8-2) to 0.4.8-3
libhal-storage0 (0.4.8-2) to 0.4.8-3
libhal0 (0.4.8-2) to 0.4.8-3
librsvg2-2 (2.9.5-3) to 2.9.5-4
librsvg2-common (2.9.5-3) to 2.9.5-4
net-tools (1.60-13) to 1.60-15

Può dipendere da questi?

DigitalKiller · 05-07-2005, 19:39

Oggi ho provato a ripristinare il vecchio XF86Config-4, ma non è cambiato nulla. Ho provato anche a reinstallare sid, stessa cosa!

Cosa devo fare? Buttare il monitor? o la scheda video?

Eppure sotto windows non sembra dare problemi. Un problema simile ce l'ho cercando di entrare nel bios..

DigitalKiller · 05-07-2005, 20:17

Aggiungo altre info.
Il problema del bios (cioè l'immagine disturbata come quella di una tv mal sintonizzata) si è verificato solo 3/4 volte da quando ho questo pc, cioè circa 2 anni.
Oltre a questo problema, ogni volta che accendo il pc (anche prima di installare linux) tutte le scritte che compaiono durante la fase di boot, non sono nitide (sono sempre disturbate), ma questo succede solo finchè la scheda video (o il monitor) non si "scalda".
Tutti questi problemi, non ce l'avevo prima di cambiare il pc. Prima avevo una matrox g400 ed il monitor andava una meraviglia..
Può essere la scheda video?

Alberto_y · 05-07-2005, 20:27

Non so se è stato il dist upgrade, però le cose che dici della scheda video non mi piacciono molto.
Non puoi installare un'altra scheda video?
Se riesci a loggarti lancia da un runlevel senza grafica "sax2 -r" se sono i driver Ati almeno riconfiguri la grafica e il monitor come se fossero da "zero".

DigitalKiller · 05-07-2005, 20:31

No, non riesco a loggarmi..se provo ad aprire un terminale lo schermo rimane nero con la scritta OUT OF RANGE..
Domani porto il mio monitor in ufficio e lo provo su un altro pc con debian (anche se è sarge non dovrebbe cambiare nulla). Se va bene, sicuramente è la scheda video

DigitalKiller · 06-07-2005, 08:10

Ho appena provato il monitor con il mio vecchio pc che ho qui in ufficio. Nessun problema, a parte quello delle scritte che, a monitor freddo, appaiono "mosse" (in un post precedente avevo detto che non lo faceva, ma ricordavo male

).
Conclusione, è la scheda video?

DigitalKiller · 06-07-2005, 08:56

Non ci sto capendo più nulla!!!
Ho provato ad installare sid su un pc a cui ho collegato il mio monitor...va di nuovo in out of range

A questo punto è andato il monitor?

DigitalKiller · 06-07-2005, 19:26

Quote:

Originariamente inviato da DigitalKiller

Non ci sto capendo più nulla!!!
Ho provato ad installare sid su un pc a cui ho collegato il mio monitor...va di nuovo in out of range

A questo punto è andato il monitor?

Correzione...Alla sono riuscito a far andare il monitor con il pc che ho in ufficio. Ho fatto diverse prove, ma nessun problema
Ho provato anche casa, ma proprio non ne vuole sapere. Cercherò di procurarmi un'altra scheda video.
Che scheda mi consigliate?

DigitalKiller · 08-07-2005, 08:53

Ieri ho installato una nuova scheda video nvidia; ho staccato il masterizzatore dvd installato poco prima di installare sid; ho staccato l'hd master (quello con windows) e provato a fare il boot da cd.. Insomma, ho provato di tutto, ma NULLA

Per caso, poi, ho provato a fare il boot lanciano il comando

Codice:

linux26 vga=771

e l'installazione è partita!

Mi spiegate a cosa serve questo parametro?

VegetaSSJ5 · 08-07-2005, 12:05

lancia fglrxconfig

DigitalKiller · 08-07-2005, 12:39

Quote:

Originariamente inviato da VegetaSSJ5

lancia fglrxconfig

Potresti spiegarti meglio?

VegetaSSJ5 · 08-07-2005, 12:52

Quote:

Originariamente inviato da DigitalKiller

Potresti spiegarti meglio?

dalla shell in modalità testuale (tanto da quanto ho capito non ti parte proprio in modalità grafica) devi lanciare il comando fglrxconfig. questo è il comando per la regolazione della configurazione di xorg che viene installato con i drivers ati, ora però siccome ati ha rilasciato drivers che si installano in modalità grafica può darsi che questo comando non venga installato, ma non credo.

mykol · 08-07-2005, 13:02

out of range lascerebbe intendere una risoluzione non supportata. forse si riferiva a quella della console che con "linux26 vga=771" hai corretto.

DigitalKiller · 08-07-2005, 13:33

Quote:

Originariamente inviato da VegetaSSJ5

dalla shell in modalità testuale (tanto da quanto ho capito non ti parte proprio in modalità grafica) devi lanciare il comando fglrxconfig. questo è il comando per la regolazione della configurazione di xorg che viene installato con i drivers ati, ora però siccome ati ha rilasciato drivers che si installano in modalità grafica può darsi che questo comando non venga installato, ma non credo.

Forse sono stato poco chiaro nei miei post. A me la modalità grafica parte, funziona tutto perfettamente. L'unico problema ce l'ho in fase di boot (o in fase di installazione) prima che venga avviato gdm e quindi gnome. Non so se è corretto quello che dico, ma non mi funziona la console, per il resto tutto ok!
Questo problema è sorto da un giorno all'altro. Non posso neppure dire se la colpa è dei driver ATI in quanto per alcuni giorni la console ha funzionato

03-07-2005, 18:43	#2
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Up! Prima di installare i driver ATI ho fatto una copia dell'XF86Config-4. Posso ripristinarlo e tentare di riconfigurare i driver ATI? __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

04-07-2005, 09:04	#3
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	__________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

04-07-2005, 10:54	#5
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Ops...hai ragione, ho dimenticato alcune cose... Ho una debian sid, fresca di installazione. Per i driver ATI ho seguito questo 3d: http://www.debianitalia.org/modules/...er=ASC&start=0 Il problema è sorto all'improvviso, da un giorno all'altro senza che io abbia modificato nulla nella configurazione. __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

05-07-2005, 19:39	#8
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Oggi ho provato a ripristinare il vecchio XF86Config-4, ma non è cambiato nulla. Ho provato anche a reinstallare sid, stessa cosa! Cosa devo fare? Buttare il monitor? o la scheda video? Eppure sotto windows non sembra dare problemi. Un problema simile ce l'ho cercando di entrare nel bios.. __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

05-07-2005, 20:17	#9
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Aggiungo altre info. Il problema del bios (cioè l'immagine disturbata come quella di una tv mal sintonizzata) si è verificato solo 3/4 volte da quando ho questo pc, cioè circa 2 anni. Oltre a questo problema, ogni volta che accendo il pc (anche prima di installare linux) tutte le scritte che compaiono durante la fase di boot, non sono nitide (sono sempre disturbate), ma questo succede solo finchè la scheda video (o il monitor) non si "scalda". Tutti questi problemi, non ce l'avevo prima di cambiare il pc. Prima avevo una matrox g400 ed il monitor andava una meraviglia.. Può essere la scheda video? __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

05-07-2005, 20:27	#10
Alberto_y Senior Member Iscritto dal: Jan 2004 Città: Torino Messaggi: 826	Non so se è stato il dist upgrade, però le cose che dici della scheda video non mi piacciono molto. Non puoi installare un'altra scheda video? Se riesci a loggarti lancia da un runlevel senza grafica "sax2 -r" se sono i driver Ati almeno riconfiguri la grafica e il monitor come se fossero da "zero".

05-07-2005, 20:31	#11
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	No, non riesco a loggarmi..se provo ad aprire un terminale lo schermo rimane nero con la scritta OUT OF RANGE.. Domani porto il mio monitor in ufficio e lo provo su un altro pc con debian (anche se è sarge non dovrebbe cambiare nulla). Se va bene, sicuramente è la scheda video __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

06-07-2005, 08:10	#12
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Ho appena provato il monitor con il mio vecchio pc che ho qui in ufficio. Nessun problema, a parte quello delle scritte che, a monitor freddo, appaiono "mosse" (in un post precedente avevo detto che non lo faceva, ma ricordavo male ). Conclusione, è la scheda video? __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

06-07-2005, 08:56	#13
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Non ci sto capendo più nulla!!! Ho provato ad installare sid su un pc a cui ho collegato il mio monitor...va di nuovo in out of range A questo punto è andato il monitor? __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

08-07-2005, 08:53	#15
DigitalKiller Senior Member Iscritto dal: Aug 2004 Città: Salento Messaggi: 1080	Ieri ho installato una nuova scheda video nvidia; ho staccato il masterizzatore dvd installato poco prima di installare sid; ho staccato l'hd master (quello con windows) e provato a fare il boot da cd.. Insomma, ho provato di tutto, ma NULLA Per caso, poi, ho provato a fare il boot lanciano il comando Codice: linux26 vga=771 e l'installazione è partita! Mi spiegate a cosa serve questo parametro? __________________ Il 90% dei problemi riscontrati sui computer sono localizzabili tra la sedia e la tastiera, il restante 10% nella scopa della donna delle pulizie.

08-07-2005, 12:05	#16
VegetaSSJ5 Senior Member Iscritto dal: Sep 2002 Città: Celano (AQ) Segno_Zodiacale: Leone Ascendente: Cammello Segni_Particolari: Quello Messaggi: 9302	lancia fglrxconfig

08-07-2005, 13:02	#19
mykol Senior Member Iscritto dal: Jan 2001 Messaggi: 3363	out of range lascerebbe intendere una risoluzione non supportata. forse si riferiva a quella della console che con "linux26 vga=771" hai corretto.

Strumenti
Mostra una versione stampabile Invia questa pagina per email