Reggio Calabria [+sped] - Amplificatore Pioneer A-400

[jok3r87]

Vendo questo ottimo amplificatore a 140€ più spedizione.

Foto del mio amplificatore.

http://img69.imageshack.us/img69/9886/dsc0019vr.jpg
http://img62.imageshack.us/img62/887/dsc0020fq.jpg
http://img94.imageshack.us/img94/19/dsc0021pm.jpg
http://img338.imageshack.us/img338/4930/dsc0024qy.jpg

Pioneer A-400 Integrated Amplifier : Specifications

DIN Continuous power output (both channels driven at 1 kHz)
85W + 85W into 4 Ohms. 1% THD
60W + 60W into 8 Ohms. 1% THD

Continuous power output (both channels driven at 20 Hz to 20kHz)
70W + 70W 4 Ohms, 0.05% THD
50W + 50W 8 Ohms, 0.03% THD

Dynamic power output (on EIA dynamic test signal)
135W/100W/70W into 2 Ohms /4 Ohms /8 Ohms

Total Harmonic Distortion
0.03% at 20Hz-20kHz , 50 W, 8 Ohms
0.05% at 20Hz-20kHz , 70 W, 4 Ohms

Frequency Response
5Hz-100 kHz + 0/- 3 dB (CD, Tuner, Aux, Tape)
20Hz-20 kHz +/- 0.3 dB (Phono MM)
20Hz-20 kHz +/- 0.5 dB (Phono MC)

Signal-to-Noise ratio (IHF short circuit, A network)
108 dB (CD, Tuner, Aux, Tape)
87 dB / 69 dB (Phono MM, 2.5 mV input, Phono MC, 0.2 mV input)

Signal-to-Noise ratio (DIN, continuous power/50 mW)
88 dB / 65 dB (CD, Tuner, Aux, Tape)
74 dB / 63 dB (Phono MM)

Input sensitivity/impedance
CD, Tuner, Aux, Tape: 150mV/ 50 kOhms
Phono (MM): 2.5mV/ 50 kOhms
Phono (MC): 0.2mV/ 100 kOhms

Power supply: 240V AC, 50/60 Hz
Power consumption: 520 Watts

Dimensions:420(W)x352(D)x126(H)mm
Weight: 8.0 Kg