[Thread Ufficiale] Router ADSL2\2+ D-Link DSL-G624T

[rdefalco]

Originariamente inviato da master3000

ragazzi io ho il 624 senza t e ne M..quale firmware devo usare?

Mi sembra strano...

i modelli che ho visto in giro sono
DI-624 che è un broadband router
DSL-G624T che ha una sola antenna 54MBPS
DSL-G624M che ha (credo) una doppia antenna e funzioni MIMO

[master3000]

Originariamente inviato da rdefalco

Mi sembra strano...

i modelli che ho visto in giro sono
DI-624 che è un broadband router
DSL-G624T che ha una sola antenna 54MBPS
DSL-G624M che ha (credo) una doppia antenna e funzioni MIMO

il mio ha un antenna a 110 uhm.............

[rdefalco]

Originariamente inviato da master3000

il mio ha un antenna a 110 uhm.............

Compaesano, vedo

Comunque mi sembra strano, sull'etichetta attaccata sotto al router dovrebbe esserci scritto tutto, in ogni caso il modello più diffuso è il DSL-G624T, spesso venduto in un'unica confezione chiamata DSL-924 che include anche la chiavetta USB Wireless...

[lognomo33]

susate,vorrei comprare questo router..il g624t..
Volevo sapere come va con emule..
e cmq come va in generale..
grazie.

[master3000]

Originariamente inviato da rdefalco

Compaesano, vedo

Comunque mi sembra strano, sull'etichetta attaccata sotto al router dovrebbe esserci scritto tutto, in ogni caso il modello più diffuso è il DSL-G624T, spesso venduto in un'unica confezione chiamata DSL-924 che include anche la chiavetta USB Wireless...

si si compaesano

cmq l'eticehtta è qsta:

[rdefalco]

Originariamente inviato da master3000

si si compaesano

cmq l'eticehtta è qsta:
http://immagini.p2pforum.it/out.php/...retichetta.jpg

OK ma tu non appartieni a questo topic

Il tuo è un DI-624 che è un broadband router, praticamente serve quando hai già un dispositivo di connessione a internet da collegare in cascata sul cavo Ethernet. Presumo tu abbia Fastweb, o al limite un modem ADSL con uscita Ethernet.

In tal caso assolutamente non usare tutti i firmware che postiamo qua.

[master3000]

Originariamente inviato da rdefalco

OK ma tu non appartieni a questo topic

Il tuo è un DI-624 che è un broadband router, praticamente serve quando hai già un dispositivo di connessione a internet da collegare in cascata sul cavo Ethernet. Presumo tu abbia Fastweb, o al limite un modem ADSL con uscita Ethernet.

In tal caso assolutamente non usare tutti i firmware che postiamo qua.

ecco si la seconda

[sorva]

Originariamente inviato da lognomo33

susate,vorrei comprare questo router..il g624t..
Volevo sapere come va con emule..
e cmq come va in generale..
grazie.

All'inizio era un disastro. Poi leggendo tutti gli articoli del thread ed alcune guide di emule sono riuscito a settarlo bene. Attualmente non ho alcun problema con emule e ti dirò che non ho dovuto nemmeno ricorrere all'aggiornamento spagnolo del firmware. Speriamo duri......

[rdefalco]

ragazzi ma solo a me si sono bloccati ostinatamente ben due router DSL-G624T con firmware EU di non so quando a causa di una decina di regole di virtualserver/portforwarding?

Aggiungo comunque che li ho poi rischiosamente resuscitati e aggiornati al firmware spagnolo, con il quale non hanno più dato problemi di accettazione regole...

[phoenix2]

Hi. Sorry for not speaking in your native language. I can't even speak a word in Italian.

I'am looking for some information, and hopefully someone can speak english and help me with my questions.

I have DSL-G624T, and I'am pretty happy with that box. Right now i have DSL-G624T_V3.00B01T01.SP-A.20060612. That's because it fix problems with p2p. It's good firmware but it seems to have some bugs too.

I am unable to connect to my box via telnet. I enabled Remote Telnet Management and put 0.0.0.0 as netmask - so it should let me connect from anywhere. Every time when I am trying to connect to my box (outside my LAN), it refuse connection. I even disabled firewall in my box, but still same issue. Can't connect.

Did anyone having some firmware as mine can confirm or deny such problem ?

I have also problem with ssh. I am trying to connect to my computer via ssh. Same problem like with telnet, router refuse my connection.
I set up a rule for Virtual Server - called ssh - port start 22, port end 22, port map 22 - applied this rule to my computer - save and reboot. But router again refuse my connection. Maybe I am doing something wrong ? If so, can anyone tell me how to correctly set up router to redirect any incoming connection on port 22 to my computer?


I found also at the begining of this thread that there is new firmware V3.00B01T02.EU-A.20060720. Can anyone tell me if it is good for p2p?.

Next question is - can anyone heard about cm_cli command line tool ?. Did anyone have some manual for it?.

And one more question about firmware. Can anyone know the site like this one "http://mcmcc.bat.ru/dlinkt/" where i can found some information about building the firmware. On the above page, you can find some usefull information, but building manual is in russian.

Or maybe someone know some places with alternative to original firmware?

Thanks in advice !

[lognomo33]

Originariamente inviato da sorva

All'inizio era un disastro. Poi leggendo tutti gli articoli del thread ed alcune guide di emule sono riuscito a settarlo bene. Attualmente non ho alcun problema con emule e ti dirò che non ho dovuto nemmeno ricorrere all'aggiornamento spagnolo del firmware. Speriamo duri......

mi sono orientato su un netgear 8314..
Leggendo i commenti sui vari forum mi è parso che siano davvero su 2 livelli diversi..e pagherei cmq piu il d-link del netgear.

[DarkWolf]

Originariamente inviato da phoenix2

Hi. Sorry for not speaking in your native language. I can't even speak a word in Italian.

welcome to the forum!!! sorry for my really bad english - remote telnet is no necessary for local connect with telnet in your box!!! are you sure that your firewall not block your request??
- use static ip "no dhcp" and no wireless
1: disable any firewall or software (peerguardian/protowall) and test!!!
2: if you cannot enter reset your router (with the back button) and test!!!
3: eventually test with the original firmware of your country!!!
4: test your router in other pc!!!
5: if your are still problem send your router for change!!!
-----
i know http://mcmcc.bat.ru/dlinkt/ but i dont have english information
no result other people with same problem
PS firmware eu is very bad for p2p!!! the best in this moment is the firmware SP

[rdefalco]

I am unable to connect to my box via telnet. I enabled Remote Telnet Management and put 0.0.0.0 as netmask - so it should let me connect from anywhere. Every time when I am trying to connect to my box (outside my LAN), it refuse connection. I even disabled firewall in my box, but still same issue. Can't connect.

I've V3.00B01T01.SP-A.20060612 firmware and I can connect with the router by using Telnet without problems.

I have also problem with ssh. I am trying to connect to my computer via ssh. Same problem like with telnet, router refuse my connection.
I set up a rule for Virtual Server - called ssh - port start 22, port end 22, port map 22 - applied this rule to my computer - save and reboot. But router again refuse my connection. Maybe I am doing something wrong ? If so, can anyone tell me how to correctly set up router to redirect any incoming connection on port 22 to my computer?

Can you tell us how are you making these tests? If you try using a PC in your internal network, Virtual Server (or Port Forwarding) won't work, because the router detects that the request comes from internal and doesn't route it.

If so, you have to try ssh access from an external PC. However with your same firmware I have many Virtual Server rules, and all of them work flawlessly.

Next question is - can anyone heard about cm_cli command line tool ?. Did anyone have some manual for it?.

Never heard of, I will search for it.

And one more question about firmware. Can anyone know the site like this one "http://mcmcc.bat.ru/dlinkt/" where i can found some information about building the firmware. On the above page, you can find some usefull information, but building manual is in russian.

I think that firmwares on that site are for DSL-G604T only or other older models.

Or maybe someone know some places with alternative to original firmware?

I'm working with this spanish one without a problem, it's online from a week now, I'm using P2P. I had a problem with the original EU firmware (maybe 02-2006?): when I created many Virtual Server rules, the router hanged and I had to reflash the firmware. Now that I'm with this, no more problems.

[DarkWolf]

Originariamente inviato da rdefalco

I've V3.00B01T01.SP-A.20060612 firmware and I can connect with the router by using Telnet without problems.

m'pare ormai siamo a livelli internazionali

[rdefalco]

Originariamente inviato da DarkWolf

m'pare ormai siamo a livelli internazionali

so' putente!

però a pensarci bene c'è tanta conoscenza su questo forum che non ci sarebbe da stupirsi...

[DarkWolf]

Originariamente inviato da rdefalco

so' putente!
però a pensarci bene c'è tanta conoscenza su questo forum che non ci sarebbe da stupirsi...

già... dovremmo fare le guide e i vari pacchetti anke in inglese

[rdefalco]

Originariamente inviato da DarkWolf

già... dovremmo fare le guide e i vari pacchetti anke in inglese

Per me non è un problema tradurre, ma non è che ci saranno già da qualche altra parte?

Sai com'è, nella prima lezione a Informatica insegnano a non reinventare la ruota

[phoenix2]

Originariamente inviato da rdefalco

I've V3.00B01T01.SP-A.20060612 firmware and I can connect with the router by using Telnet without problems.


Can you tell us how are you making these tests? If you try using a PC in your internal network, Virtual Server (or Port Forwarding) won't work, because the router detects that the request comes from internal and doesn't route it.

Port forwarding for telnet isn't necessary as far as I am telneting to router.

I was making 4 types of test.
1). Telnet from internal network (LAN) to router using numeric IP address
result: no problem, connection established
2). Telnet from internal network (LAN) to router using NAME as address. NAME = DDNS name of my computer
result: problem, connection refused
3). Telnet from external network to router using IP address
result: problem, connection refused
4). Telnet from external network to router using NAME as address. NAME = DDNS name of my computer
result: problem, connection refused

I was calling to tech. support - they told me to put in Remote Telnet Management the exact IP address which I am using to telneting from. I other words that mean - if you are using for example 7.7.7.7 and netmask 0.0.0.0 (which supposed to work with any address) it won't work!.
I have not test this method yet, I will try today.

So. If you have no problem with telnet, can you tell me if you telneting from external network or internal?

Originariamente inviato da rdefalco

If so, you have to try ssh access from an external PC. However with your same firmware I have many Virtual Server rules, and all of them work flawlessly.

Same as Telnet. Only ssh from internal network works good. Any try from external causes refusing of connection.

Originariamente inviato da rdefalco

I'm working with this spanish one without a problem, it's online from a week now, I'm using P2P. I had a problem with the original EU firmware (maybe 02-2006?): when I created many Virtual Server rules, the router hanged and I had to reflash the firmware. Now that I'm with this, no more problems.

I am also happy with that firmware, stable Wi-Fi, stable p2p.. but I have problems with ssh and telnet.

According to problems with my ssh connection, tech support suggest to me to download EU firmware, they told me that there is an option (Web Interface) that enables/disables remote ssh. I think that if there is such option in Web Interface, that there should be possible to change it (enable or disable) via telnet. Anyone know how to do it? My guess is to change option in XML file, but which one ?

What can I also do is to FLASH my router one more time, then reset to default values, and after that put again my setting via Web Interface (without using of configuration file).

[rdefalco]

Originariamente inviato da phoenix2

So. If you have no problem with telnet, can you tell me if you telneting from external network or internal?

I've tried to telnet the router only from internal network, using its IP address. You said you tried to telnet using the computer name, what do you mean? As far as I know, my router doesn't have a network name, so I can only try using IP addresses. And yes, I didn't from external network, so I don't know if it works.

Did you check in the ADVANCED - FIREWALL section? There are options to block external Telnet and FTP sessions, including other options to prevent DDOS attacks. Maybe telnet is forbidden there. Sorry if I ask silly questions

[phoenix2]

Originariamente inviato da phoenix2

I was calling to tech. support - they told me to put in Remote Telnet Management the exact IP address which I am using to telneting from. I other words that mean - if you are using for example 7.7.7.7 and netmask 0.0.0.0 (which supposed to work with any address) it won't work!.
I have not test this method yet, I will try today.

Still not working, even when I put exact IP number I am telneting from.

You can try telnet to my router by yourself - ordalicium.no-ip.info