|
|||||||
|
|
|
![]() |
|
|
Strumenti |
|
|
#1 |
|
Senior Member
Iscritto dal: Feb 2010
Città: ROMA
Messaggi: 1813
|
Secondo voi sono normali questi valori per una adsl 2+ ?
Salve, volevo sapere se per la mia Libero adsl2+ 8 mb sono normali questi valori:
SNR Margin (dB): 25.1 Downstream 30.3 Upstream Attenuation (dB): 17.0 Downstream 7.1 Upstream Sotto incollo il resto dei valori in quanto la foto viene gigantesca Con speedtest.net ottengo in download 6.85 e in up 0.43. Com'è? Mode: ADSL2+ Line Coding: Trellis On Status: No Defect Link Power State: L0 Downstream Upstream SNR Margin (dB): 25.1 30.4 Attenuation (dB): 17.0 7.1 Output Power (dBm): 19.2 12.2 Attainable Rate (Kbps): 17608 1213 Rate (Kbps): 8000 509 MSGc (number of bytes in overhead channel message): 59 16 B (number of bytes in Mux Data Frame): 250 15 M (number of Mux Data Frames in FEC Data Frame): 1 1 T (Mux Data Frames over sync bytes): 1 3 R (number of check bytes in FEC Data Frame): 0 0 S (ratio of FEC over PMD Data Frame length): 1.0000 0.9846 L (number of bits in PMD Data Frame): 2008 130 D (interleaver depth): 1 1 Delay (msec): 0 0 Super Frames: 221400 221398 Super Frame Errors: 2 86176 RS Words: 0 0 RS Correctable Errors: 0 0 RS Uncorrectable Errors: 0 N/A HEC Errors: 1 691500 OCD Errors: 0 0 LCD Errors: 0 0 Total Cells: 67882990 1752741933 Data Cells: 400586 738147313 Bit Errors: 0 41172604 Total ES: 1 22869 Total SES: 0 2688 Total UAS: 18 15840101 |
|
|
|
|
|
#2 |
|
Member
Iscritto dal: Sep 2006
Città: Zurich
Messaggi: 132
|
I valori vanno bene, sei vicino alla centrale, potrebbero darti anche più banda mantenendo valori di tutto rispetto.
Ciao |
|
|
|
|
|
#3 | |
|
Senior Member
Iscritto dal: Feb 2010
Città: ROMA
Messaggi: 1813
|
Quote:
p.s da cosa deduci che sono vicino alla centrale? |
|
|
|
|
|
|
#4 |
|
Senior Member
Iscritto dal: Mar 2007
Messaggi: 7863
|
La portante che tu acquisti per contratto, riferisce alla banda di livello fisico ed è un valore puramente teorico. I valori misurati con i test invece si riferiscono alla velocità vista dal livello applicazione (al più trasporto) e sono solitamente in un rapporto dell' 80%, proprio come nel tuo caso.
La distanza della centrale è direttamente proporzionale all' attenuazione, che fino a 30db è buona. |
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 18:05.




















