lentezza avvia ubuntu

[trafalguar]

sul portatile ho installato ubuntu 7.10 e xp home.. ma mentre xp ci mette circa un 20ina di secondi a fare il boot, ubuntu dopo averlo selezionato in grub rimane lo schermo nero per circa 2:45 (2 minuti e 45 secondi) prima di partire la schermata del login.. credo non sia normale come posso ovviare al problema?!

[leletop]

Credo che la soluzione sia ricompilandosi per bene il kernel in funzione delle proprie periferiche

[trafalguar]

cioè? lo so a malapena usare linux.. se non mi date delle dritte passo passo la vedo dura

[Barone di Sengir]

ricompilare il kernel è sicuramente un'ottimo modo di velocizzare il sistema, ma credo che il problema sia risolvibile in maniera + "semplice"

magari inizia a postare il risultato del comando dmesg, tutto se possibile, e i log (li trovi in /var/logs).

hai aggiornato ubuntu di recente? che kernel stai usando? (nella shell digita uname -r)

[trafalguar]

allora.. il kernel è 2.6.22-15-generic riguardo gli aggiornamenti faccio tutti gli aggiornamenti che trova ogni volta che ne trova.. il risultato di dmesg lo scrivo ora di seguito, ma riguardo ai log.. nella cartella da te indicata ci sono molti files, alcuni senza estensione, alcuni con estensione .gz, alcuni con estensione .log .log.0 .log.1 .log.2 non saprei nè quali files prendere nè come postare tutti quei files

[ 0.000000] Linux version 2.6.22-15-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Fri Jul 11 19:25:33 UTC 2008 (Ubuntu 2.6.22-15.56-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fea0000 (usable)
[ 0.000000] BIOS-e820: 000000003fea0000 - 000000003feac000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feac000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7c70
[ 0.000000] Entering add_active_range(0, 0, 261792) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261792
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261792
[ 0.000000] On node 0 totalpages: 261792
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32163 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7C40 checksum 0
[ 0.000000] ACPI: RSDP 000F7C40, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FEA472C, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FEABE1A, 0074 (r1 HP Piranha 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 3FEA4760, 76BA (r1 HP 309B 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEACFC0, 0040
[ 0.000000] ACPI: SSDT 3FEABE8E, 00F0 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3FEABF7E, 0046 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 3FEABFC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 259747
[ 0.000000] Kernel command line: root=UUID=c2bb9a56-6356-4929-970e-1683c13e2b52 ro quiet splash locale=it_IT
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1989.853 MHz processor.
[ 6.253196] Console: colour VGA+ 80x25
[ 6.253719] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 6.254588] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.274813] Memory: 1026536k/1047168k available (2016k kernel code, 19912k reserved, 919k data, 364k init, 129664k highmem)
[ 6.274823] virtual kernel memory layout:
[ 6.274824] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 6.274826] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.274827] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 6.274828] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 6.274829] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 6.274830] .data : 0xc02f8046 - 0xc03dde84 ( 919 kB)
[ 6.274832] .text : 0xc0100000 - 0xc02f8046 (2016 kB)
[ 6.274834] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.274873] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 6.354807] Calibrating delay using timer specific routine.. 3983.81 BogoMIPS (lpj=7967622)
[ 6.354838] Security Framework v1.0.0 initialized
[ 6.354845] SELinux: Disabled at boot.
[ 6.354858] Mount-cache hash table entries: 512
[ 6.354985] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 6.354993] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 6.354996] CPU: L2 Cache: 128K (64 bytes/line)
[ 6.354998] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 6.355008] Compat vDSO mapped to ffffe000.
[ 6.355019] Checking 'hlt' instruction... OK.
[ 6.370927] SMP alternatives: switching to UP code
[ 6.371198] Freeing SMP alternatives: 11k freed
[ 6.371512] Early unpacking initramfs... done
[ 6.664216] ACPI: Core revision 20070126
[ 6.664312] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 7.307251] CPU0: AMD Mobile AMD Sempron(tm) Processor 3300+ stepping 02
[ 7.307271] Total of 1 processors activated (3983.81 BogoMIPS).
[ 7.307441] ENABLING IO-APIC IRQs
[ 7.307630] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 7.453588] Brought up 1 CPUs
[ 7.453689] Booting paravirtualized kernel on bare hardware
[ 7.453769] Time: 15:11:31 Date: 07/28/108
[ 7.453793] NET: Registered protocol family 16
[ 7.453880] EISA bus registered
[ 7.453895] ACPI: bus type pci registered
[ 7.454020] PCI: PCI BIOS revision 2.10 entry at 0xfd86c, last bus=8
[ 7.454022] PCI: Using configuration type 1
[ 7.454023] Setting up standard PCI resources
[ 7.455463] ACPI: EC: Look up EC in DSDT
[ 7.456036] ACPI: EC: GPE=0x1a, ports=0x66, 0x62
[ 7.456880] ACPI: Interpreter enabled
[ 7.456883] ACPI: (supports S0 S3 S4 S5)
[ 7.456894] ACPI: Using IOAPIC for interrupt routing
[ 7.498086] ACPI: EC: GPE=0x1a, ports=0x66, 0x62
[ 7.498129] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.498136] PCI: Probing PCI hardware (bus 00)
[ 7.499556] PCI: Transparent bridge - 0000:00:14.4
[ 7.499650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.499771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 7.499861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 7.499954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 7.501443] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 7.501545] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 7.501629] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 7.501713] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 7.501795] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 7.501878] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 7.501961] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 7.502045] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 7.502133] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.502143] pnp: PnP ACPI init
[ 7.502154] ACPI: bus type pnp registered
[ 7.521533] pnp: PnP ACPI: found 10 devices
[ 7.521537] ACPI: ACPI bus type pnp unregistered
[ 7.521541] PnPBIOS: Disabled by ACPI PNP
[ 7.521598] PCI: Using ACPI for IRQ routing
[ 7.521601] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.521607] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 7.521651] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 7.546071] NET: Registered protocol family 8
[ 7.546073] NET: Registered protocol family 20
[ 7.546154] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 7.546157] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 7.546160] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 7.546169] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 7.546172] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 7.546178] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 7.546180] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 7.546183] pnp: 00:08: ioport range 0x870-0x87f has been reserved
[ 7.546188] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 7.546191] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 7.546193] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
[ 7.549451] Time: tsc clocksource has been installed.
[ 7.576408] PCI: Bridge: 0000:00:01.0
[ 7.576410] IO window: 9000-9fff
[ 7.576414] MEM window: c0100000-c01fffff
[ 7.576416] PREFETCH window: c8000000-cfffffff
[ 7.576419] PCI: Bridge: 0000:00:05.0
[ 7.576420] IO window: disabled.
[ 7.576423] MEM window: disabled.
[ 7.576425] PREFETCH window: disabled.
[ 7.576430] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 7.576432] IO window: 0000a400-0000a4ff
[ 7.576437] IO window: 0000a800-0000a8ff
[ 7.576443] PREFETCH window: 50000000-53ffffff
[ 7.576448] MEM window: 54000000-57ffffff
[ 7.576454] PCI: Bridge: 0000:00:14.4
[ 7.576457] IO window: a000-afff
[ 7.576463] MEM window: c0200000-c02fffff
[ 7.576468] PREFETCH window: 50000000-53ffffff
[ 7.576489] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 7.576520] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 7.576537] NET: Registered protocol family 2
[ 7.613423] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 7.613570] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 7.615296] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 7.615875] TCP: Hash tables configured (established 131072 bind 65536)
[ 7.615879] TCP reno registered
[ 7.625488] checking if image is initramfs... it is
[ 8.076863] Switched to high resolution mode on CPU 0
[ 8.197849] Freeing initrd memory: 7047k freed
[ 8.198220] audit: initializing netlink socket (disabled)
[ 8.198231] audit(1219936291.032:1): initialized
[ 8.198287] highmem bounce pool size: 64 pages
[ 8.199713] VFS: Disk quotas dquot_6.5.1
[ 8.199758] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.199845] io scheduler noop registered
[ 8.199847] io scheduler anticipatory registered
[ 8.199849] io scheduler deadline registered
[ 8.199862] io scheduler cfq registered (default)
[ 8.199872] PCI: MSI quirk detected. MSI deactivated.
[ 8.199912] Boot video device is 0000:01:05.0
[ 8.200004] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 8.200024] assign_interrupt_mode Found MSI capability
[ 8.200026] Allocate Port Service[0000:00:05.0cie00]
[ 8.200133] isapnp: Scanning for PnP cards...
[ 8.554231] isapnp: No Plug & Play device found
[ 8.597930] Real Time Clock Driver v1.12ac
[ 8.598006] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 8.598977] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 17
[ 8.598987] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 8.599399] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 8.599597] input: Macintosh mouse button emulation as /class/input/input0
[ 8.599659] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 8.618541] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 8.636466] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.636470] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 8.636473] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 8.636475] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 8.636478] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 8.636659] mice: PS/2 mouse device common for all mice
[ 8.638956] EISA: Probing bus 0 at eisa.0
[ 8.638965] Cannot allocate resource for EISA slot 1
[ 8.638993] Cannot allocate resource for EISA slot 8
[ 8.638995] EISA: Detected 0 cards.
[ 8.639086] TCP cubic registered
[ 8.639097] NET: Registered protocol family 1
[ 8.639118] Using IPI No-Shortcut mode
[ 8.639300] Magic number: 4:324:185
[ 8.639749] Freeing unused kernel memory: 364k freed
[ 8.688850] input: AT Translated Set 2 keyboard as /class/input/input1
[ 9.893446] AppArmor: AppArmor initialized<5>audit(1219936292.532:2): type=1505 info="AppArmor initialized" pid=1197
[ 10.014104] fuse init (API version 7.8)
[ 10.119132] Failure registering capabilities with primary security module.
[ 10.425924] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 10.425930] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.025177] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 11.224901] ACPI: Thermal Zone [THRM] (0 C)
[ 20.058450] usbcore: registered new interface driver usbfs
[ 20.058471] usbcore: registered new interface driver hub
[ 20.058489] usbcore: registered new device driver usb
[ 20.059205] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.059243] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 20.059257] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 20.059452] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 20.059474] ohci_hcd 0000:00:13.0: irq 18, io mem 0xc0000000
[ 20.117919] usb usb1: configuration #1 chosen from 1 choice
[ 20.117949] hub 1-0:1.0: USB hub found
[ 20.117962] hub 1-0:1.0: 4 ports detected
[ 20.221809] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 20.221825] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 20.221845] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 20.221862] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0001000
[ 20.281660] usb usb2: configuration #1 chosen from 1 choice
[ 20.281681] hub 2-0:1.0: USB hub found
[ 20.281691] hub 2-0:1.0: 4 ports detected
[ 20.404956] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 20.404972] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 20.404997] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 20.405051] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0002000
[ 20.405063] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.405138] usb usb3: configuration #1 chosen from 1 choice
[ 20.405160] hub 3-0:1.0: USB hub found
[ 20.405166] hub 3-0:1.0: 8 ports detected
[ 20.416506] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.416512] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.505725] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 20.505748] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[ 20.505760] ATIIXP: chipset revision 0
[ 20.505762] ATIIXP: not 100% native mode: will probe irqs later
[ 20.505771] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hdaMA, hdbio
[ 20.505787] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdcMA, hddio
[ 20.505797] Probing IDE interface ide0...
[ 20.793403] hda: FUJITSU MHV2080AT PL, ATA DISK drive
[ 21.458817] 8139too Fast Ethernet driver 0.9.28
[ 21.464173] hda: selected mode 0x45
[ 22.364212] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 22.743940] Probing IDE interface ide1...
[ 23.478057] hdc: HL-DT-ST DVDRAM GSA-4082N, ATAPI CD/DVD-ROM drive
[ 23.813215] hdc: selected mode 0x22
[ 23.814123] ide1 at 0x170-0x177,0x376 on irq 15
[ 23.823690] SCSI subsystem initialized
[ 23.828723] libata version 2.21 loaded.
[ 23.830902] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 23 (level, low) -> IRQ 20
[ 23.884326] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0209000-c02097ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 23.884571] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 23.885541] eth0: RealTek RTL8139 at 0xf881e400, 00:0f:b0:c5:8b:99, IRQ 21
[ 23.885545] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 23.887630] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 23.895107] hda: max request size: 128KiB
[ 23.895112] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 23.902463] hda: cache flushes supported
[ 23.902518] hda: hda1 hda2 < hda5 hda6 > hda3
[ 23.978793] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
[ 23.978802] Uniform CD-ROM driver Revision: 3.20
[ 25.603275] Attempting manual resume
[ 25.603278] swsusp: Resume From Partition 3:6
[ 25.603280] PM: Checking swsusp image.
[ 25.702841] PM: Resume from disk failed.
[ 26.218258] kjournald starting. Commit interval 5 seconds
[ 26.218271] EXT3-fs: mounted filesystem with ordered data mode.
[ 115.077741] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 115.199474] Netfilter messages via NETLINK v0.30.
[ 115.220052] nf_conntrack version 0.5.0 (8181 buckets, 65448 max)
[ 127.316527] Linux agpgart interface v0.102 (c) Dave Jones
[ 127.341168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 127.404574] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 127.581954] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 129.386263] Yenta: CardBus bridge found at 0000:06:04.0 [103c:30a4]
[ 129.386290] Yenta: Enabling burst memory read transactions
[ 129.386296] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 129.386298] Yenta: Routing CardBus interrupts to ISA
[ 129.386305] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[ 129.405954] ndiswrapper version 1.45 loaded (smp=yes)
[ 129.470009] sdhci: Secure Digital Host Controller Interface driver
[ 129.470012] sdhci: Copyright(c) Pierre Ossman
[ 129.618625] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 129.618631] Socket status: 30000006
[ 129.618635] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 129.618638] cs: IO port probe 0xa000-0xafff: clean.
[ 129.618844] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 129.618847] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 129.914357] input: PC Speaker as /class/input/input2
[ 130.149178] ndiswrapper: driver bcmwl5a (Broadcom,12/22/2004, 3.100.46.0) loaded
[ 130.149426] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
[ 130.157730] ndiswrapper: using IRQ 22
[ 130.561578] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 130.624885] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 130.800051] wlan0: ethernet device 00:14:a5:72:b2:6e using NDIS driver: bcmwl5a, version: 0x3642e00, NDIS version: 0x501, vendor: '', 14E4:4318.5.conf
[ 130.800097] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 130.802969] usbcore: registered new interface driver ndiswrapper
[ 130.803101] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0)
[ 130.803126] ACPI: PCI Interrupt 0000:06:04.4[A] -> GSI 20 (level, low) -> IRQ 16
[ 130.803211] mmc0: SDHCI at 0xc020a000 irq 16 DMA
[ 130.807246] mmc1: SDHCI at 0xc0209c00 irq 16 DMA
[ 130.807299] mmc2: SDHCI at 0xc0209800 irq 16 DMA
[ 130.816599] ACPI: PCI Interrupt 0000:06:04.3[b] -> GSI 23 (level, low) -> IRQ 20
[ 130.820836] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 17
[ 130.840902] tifm_core: MMC/SD card detected in socket 0:3
[ 130.931827] MC'97 0 converters and GPIO not ready (0x1)
[ 130.932641] ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 17
[ 131.325689] cs: IO port probe 0x100-0x3af: clean.
[ 131.328176] cs: IO port probe 0x3e0-0x4ff: clean.
[ 131.329143] cs: IO port probe 0x820-0x8ff: clean.
[ 131.329910] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 131.330783] cs: IO port probe 0xa00-0xaff: clean.
[ 131.371850] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[ 134.014783] lp: driver loaded but no devices found
[ 134.280673] Adding 425648k swap on /dev/hda6. Priority:-1 extents:1 across:425648k
[ 135.617743] EXT3 FS on hda3, internal journal
[ 143.490349] No dock devices found.
[ 144.103409] ACPI: AC Adapter [ACAD] (on-line)
[ 144.874528] input: Power Button (FF) as /class/input/input4
[ 144.878719] ACPI: Power Button (FF) [PWRF]
[ 144.911446] input: Sleep Button (FF) as /class/input/input5
[ 144.915634] ACPI: Sleep Button (FF) [SLPF]
[ 144.947333] input: Lid Switch as /class/input/input6
[ 144.951470] ACPI: Lid Switch [LID]
[ 144.983840] input: Power Button (CM) as /class/input/input7
[ 144.987991] ACPI: Power Button (CM) [PWRB]
[ 145.309477] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 145.925145] ACPI: Battery Slot [BAT1] (battery absent)
[ 148.719735] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3300+ processors (version 2.00.00)
[ 148.719773] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
[ 148.719775] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
[ 148.719778] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe
[ 148.719780] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x13
[ 148.721333] powernow-k8: ph2 null fid transition 0xc
[ 154.660616] Failure registering capabilities with primary security module.
[ 154.834038] eth0: link down
[ 155.383179] apm: BIOS not found.
[ 158.067689] Bluetooth: Core ver 2.11
[ 158.067795] NET: Registered protocol family 31
[ 158.067798] Bluetooth: HCI device and connection manager initialized
[ 158.067802] Bluetooth: HCI socket layer initialized
[ 158.137573] Bluetooth: L2CAP ver 2.8
[ 158.137578] Bluetooth: L2CAP socket layer initialized
[ 158.213689] Bluetooth: RFCOMM socket layer initialized
[ 158.213768] Bluetooth: RFCOMM TTY layer initialized
[ 158.213770] Bluetooth: RFCOMM ver 1.8
[ 162.008000] Marking TSC unstable due to: possible TSC halt in C2.
[ 162.012000] Time: acpi_pm clocksource has been installed.
[ 163.032000] [drm] Initialized drm 1.1.0 20060810
[ 163.048000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 163.048000] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 163.556000] Clocksource tsc unstable (delta = -128735470 ns)
[ 165.144000] [drm] Setting GART location based on new memory map
[ 165.144000] [drm] Loading R300 Microcode
[ 165.144000] [drm] writeback test succeeded in 1 usecs
[ 191.720000] NET: Registered protocol family 17
[ 207.936000] NET: Registered protocol family 10
[ 207.936000] lo: Disabled Privacy Extensions
[ 207.936000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 218.684000] eth1: no IPv6 routers present

[Barone di Sengir]

forse ti conviene provare hardy, la 8.04, ha ampliato il supporto hardware...
magari prima con synaptic attiva il repository backport (impostazioni, archivi dei pacchetti, in aggiornamenti spunti quelli non supportati con scritto gutsy-backports); ricarichi e provi a vedere se trovi un kernel + recente... (hardy adesso usa il 2.6.24-19).

per quanto riguarda i log puoi provare in sistema - amministrazione - registro di sistema, lì c'è tutto

[trafalguar]

ma quindi è un problema di hardware? ha problemi nel riconoscere l'hardware nel mio portatile, perciò questa lentezza? Reinstallare tutto sarà l'ultima spiaggia.. riguardo ai log, dove hai detto tu c'è tutto.. ma manca una funzione per esportare tutto, sono pagine e pagine di roba e non so come postarle..
riguardo synaptic come attivo il repository backport???

[Barone di Sengir]

ti ho scritto la procedura per filo e per segno nel post precedente...

[trafalguar]

ora ho davanti la lista di tutti i pacchetti in ordine alfabetico.. ma che cosa devo cercare esattamente visto che ne sono centinaia?!

[Barone di Sengir]

prova a fare una ricerca inserendo 2.6.24 se esce qualcosa...

[Barone di Sengir]

o segui questa guida
http://www.intilinux.com/linux/563/k...-ubuntu-gutsy/

[danlo8600]

Scusa la domanda idiota, ma che portatile è??? Ti si vede la schermata di caricamento? cioè quella con scritto UBUNTU e la barra di progresso arancione sottostante??? Che scheda video hai?? hai provato a premere durante il boot di ubuntu i tasti ctrl+alt+f1 così facendo vedi cosa succede durante l'avvio e vedi se viene riportato qualche error, accorgersene è facile scrive ERROR o ERR dipende, comunque vedi così dove si pianta per 2 minuti e vediamo cosa è effettivamente. Io ad esempio ho un problema simile sia con ubuntu che con tutte le altre distro dovute al fatto che ho un hardisk un pò malconcio...

[Gimli[2BV!2B]]

Ma hai notato che perde circa 90 secondi tra il mount del filesystem e l'avvio di iptables?

[ 26.218271] EXT3-fs: mounted filesystem with ordered data mode.
[ 115.077741] ip_tables: (C) 2000-2006 Netfilter Core Team

Ipotesi ultra-veloce: non è che hai qualche problema alle regole iptables (numero estremamente elevato, oppure molto complesse, visto che non vengono evidenziati errori)?
Ma potrebbe trattarsi di tutt'altro...

[Gimli[2BV!2B]]

Poi, forse, potresti guadagnare qualche secondo evitando questo:
[ 162.008000] Marking TSC unstable due to: possible TSC halt in C2.
...
[ 163.556000] Clocksource tsc unstable (delta = -128735470 ns)

Per questo aggiungerei notsc in Grub.

Per farlo apri il file /boot/grub/menu.lst da amministratore ed aggiungi notsc in coda alla riga che comincia con # kopt=.
Questa, ad esempio, è parte della mia (aggiungi solo notsc in fondo, nient'altro):

# kopt=root=/dev/hda3 ro notsc

Fatta la modifica occorre applicarla con sudo update-grub

[trafalguar]

non lo so.. prima di morire pazzo ho deciso di installare l'ultima versione di ubuntu e poi vi farò sapere.. spero che venga riconosciuto tutto l'hardware, soprattutto la scheda wireless, perchè mi ricordo che l'altra volta c'ho dovuto smanettare un bel pò per fargliela riconoscere.. e senza connessione mi riesce difficile fare qualsiasi cosa (mi serve di scaricare altre applicazioni, etc.)

[trafalguar]

ok con l'ultima versione di ubuntu ci mette poco più di una 20ina di secondi per uscire la schermata di login.. tutto ok quindi.. una domanda però, perchè i menù sono mezzo in italiano e mezzo in inglese? Cioè.. in alto a sinistra ho le tre voci "Applications", "Places", "System" però le sottovoci sono tutte in italiano.. come posso mettere tutto in italiano? sono andato in Sistema -> Amministrazione -> Supporto Lingue dove mi dice Supported Languages e c'è solo Inglese, più sotto Default Language e c'è Italiano..

[Barone di Sengir]

nell'elenco c'è anche italiano, lo selezioni e diventa tutto italiano

[trafalguar]

come ho già detto, sotto supported languages c'è solo inglese, sotto default language c'è anche italiano.. ma non cambia nulla.. molte cose sono inglese in questo modo.. forse ci vuole la connessione a internet per scaricare altri files??

[patel45]

Originariamente inviato da Gimli[2BV!2B]

Fatta la modifica occorre applicarla con sudo update-grub

Perché ? non è sufficiente la modifica del menu.lst ? update-grub cerca i kernel installati.

[Barone di Sengir]

si infatti, ti scarica i pacchetti in italiano di tutti i software installati...