AVM FRITZ!Box 7581: VDSL/EVDSL, 4xGigaLan, 2xUSB3, WiFi ac/n, DECT, NAS, DDNS

[Totix92]

Uscito il fritz!os 7.01 per il repeater 1750E
http://download.avm.de/fritzwlan/fri...34.07.01.image

[strassada]

cut
(avevo letto male la numerazione della buid di una beta)

[Totix92]

E' da un po' che non escono nuove beta per il 7581...

[dalucio]

Uscita versione 7.01 avvio aggiornamento

Inviato dal mio BLA-L09 utilizzando Tapatalk

[Totix92]

Puoi dirmi cortesemente se nel menù WiFi --> Rete wireless, nei client viene mostrato 11v o 11k o entrambi?
Il DECT Eco finalmente funziona?
Hanno fatto il miracolo... l'ultima beta ancora non supportava ne il PMF e ne l'802.11k e 802.11v
Qualcuno può confermare che adesso ci sono?

[dalucio]

Hanno sistemato BufferBloat A+

Il dect eco mi è rimasto disattivato ma non ho avuto tempo per fare un bel reset completo delle impostazioni
Il wifi non trovo le voci 11v o 11k




questi dispositivi dovrebbero essere compatibili con i fritzbox smarthome https://www.smarthome.de/shop/alle-kategorien/smarthome

he update file "FRITZ.Box_7581.152.xx.xx.image" on ftp.avm.de contains the latest FRITZ!OS (Firmware) for the FRITZ!Box 7581.

**Attention:** This update file is only intended for use with FRITZ!Box 7581!
Please follow the instructions at the end of this file to install the update.


```
Product:	FRITZ!Box 7581
 
Version:        FRITZ!OS 7.01

Language: English, French, Italian, Polish, Spanish

Release date: 06.11.2018
```


**New Features:**
-   New functions and improvements for Mesh
-   New features for the FRITZ!  Hotspot
-   MyFRITZ! access to FRITZ!Box via internet now comes without security information in the browser
-   Increased speed when using USB storage media with NTFS data systems
-   Support for DECT-ULE/HAN-FUN, the manufacturer-independent standard for Smart Home devices 
-   New features for FRITZ!Fon devices
-   Schedule for call diversion: configure once so that you can always be reached
-   Transmit telephone numbers to additional FRITZ!Boxes
-   Support for Telekom SIP Trunking


Note: Instructions for configuring and using Mesh functions are presented at en.avm.de/mesh-faq


Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version.

---


# New Features in FRITZ!OS 7.00

##Internet: 
- **NEW** register for regular status updates for your FRITZ!Box (MyFRITZ! report)
- **NEW** MyFRITZ! internet access to the FRITZ!Box without a warning from the browser (SSL certificate from Let's Encrypt)

##Telephony:
- **NEW**  The FRITZ!Box configured as Mesh Master transfers your telephone numbers to an additional FRITZ!Box as a Mesh Repeater.
- **NEW** Scheduling function for call diversion
- **NEW**  Telephone numbers can be blocked or added to your contacts directly from the call list
- **NEW**  Support for Deutsche Telekom SIP Trunking (DeutschlandLAN SIP Trunk / SIP Trunk Pooling)

##DECT: 
- **NEW**  FRITZ!Fon phone number display shows region and country area codes
- **NEW**  Now five different ring tones of your own can be selected for FRITZ!Fon
- **NEW**  FRITZ!Fon start screen event log: received faxes are displayed
- **NEW**  FRITZ!Fon Smart Home start screen now scrollable to display more Smart Home devices
- **NEW**  Expanded registration mode for (re-)registration of all devices known to the FRITZ!Box, for instance, after switching to a new FRITZ!Box
- **NEW**  FRITZ!Box supports software updates for compatible handsets from other manufacturers (CAT-iq SUOTA)
- **NEW**  FRITZ!Fon supports updates for FRITZ!Box (can also be protected with a PIN)
- **NEW**  Separate volume controls for the alarm sound
- **NEW**  FRITZ!Fon media player: save and load playlists as .xsfp files via FRITZ!NAS
- **NEW **  Jump to next/last title when playing podcasts on your FRITZ!Fon
- **NEW**  Support for Speedphone 11 from Deutsche Telekom

##Home network:
- **NEW**  User interface with new Home Network -> "Mesh" menu for all settings concerning Mesh
- **NEW**  Mesh Home Network Overview also shows telephone and Smart Home connections complete with topology and connection quality
- **NEW**  In the ex works settings, a second FRITZ!Box connected via Ethernet becomes a Mesh repeater at the push of a button (WPS)
- **NEW**  Switch for IP client or router operation in the network settings area
- **NEW**  Switch for the function of the FRITZ!Box in the home network (Mesh operating mode) as Mesh Master or Mesh Repeater in the Home Network>Mesh>Mesh Settings and WLAN areas
- **NEW**  Mesh events added to the event messages
- **NEW**  The settings for push services, auto updates and AVM services are applied to the entire Mesh WiFi

More information on the new features for Mesh is presented at "New features for Mesh"
More information on configuration and using Mesh is presented at en.avm.de/mesh-faq

##Wireless: 
- ** NEW**  With a "FRITZ!  Hotspot it's easier than ever to give guests WiFi access in public places such as bars, restaurants, doctor's practices etc.  For details, see Wireless / Guest Access.
- **NEW**  Improved wireless security through support of activated Protected Management Frames (PMF)


##Smart Home: 
- **NEW**   Support for DECT ULE/HAN FUN

------------------------------------------------------------

With each FRITZ!OS update, AVM also updates its security functions.    Therefore we recommend performing the update for all devices. 

------------------------------------------------------------
# Additional improvements in FRITZ!OS 7.01


##DSL: 
- **Fixed** Datarates shown at different places in the user interface have not always been identical

##Internet: 
- **Fixed** Online-Monitor was not showing downloads from Wifi-Guest devices correctly
- **Fixed** On the MyFRITZ!-page of the FRITZ!Box (myfritz.box) changing the user-mail-adress was offered, even if no user was logged in
- **Fixed** wrong display on DSL-Settings after recovering of Powerline-settings
- **Fixed** Importing vpn settings failed in certain scenarios 
- **Fixed** Creating a vpn-user with NAS-rights required double confirmation
- **Changed** global filter settings now include Windows proxy detection

##Home network:
- **Improved** added unique name to FRITZ!Box in Mesh Repeater mode
- **Fixed** wrong display of Mesh-Overview in Edge browser

##Smart Home:
- **Fixed** Smart home devices did not show on a Mesh Repeater's user interface

##System:
- **Fixed** Google authenticator: setup did not work with space in name
- **Fixed** Diagnostic - Security page did not show when language was set to english
- **Fixed** Missing entries in diagnostic page when using UTML-fallback
- **Fixed** missing error message when Smart home device with empty battery detected

##Telephony:
- **Fixed** new voice messages could not be played on myfritz.box when using iOS or macOS 
- **Fixed** when setting up call forwaring the wrong options were greyed out
- **Fixed** when setting up a new telephone number going back was impossible after failed test
- **Fixed** setting up new sip numbers was not possible when country was set to Italy
- **Fixed** it was impossible to edit an existing SIP number
- **Fixed** some IP phones could not register after update to FRITZ!OS 7 ('422 Session Intervall too Small')

##WIFI: 
- **Improved** Connection of Wifi-repeater with activated protected management frames (PMF)
- **Improved** Stability
- **Fixed** When changing operation mode to "repeater" the Wifi LED would continiously flash
- **Fixed** problem when changing WLAN-coexistence setting in Mesh repeater mode
- **Fixed** wrong access type was shown when in Mesh repeater mode
- **Fixed** possible problems when reenabeling 2.4Ghz radio
- **Fixed** in some cases the connection would break, when changing encryption in bridge mode
- **Fixed** after updating to FRITZ!OS 7.00 auto-channel was reactived in some cases
- **Fixed** System - Eventlog did some times show wrong data rate
- **Fixed** guest access did not work on Mesh repeater after Wifi was restarted on the mesh master

##USB/NAS: 
- **Fixed** when playing media via the FRITZ!NAS media player, playback stopped after 20 minutes
- **Fixed** missing error message when trying to play incompatible media file
- **Fixed** in mobile view it was impossible to change or delete shares

##USB/UMTS: 
- **Fixed** wrong DSL status display in fallback mode
- **Fixed** connection status was wrong with activated tethering

##Powerline: 
- **Fixed** wrong presentation while detecting and optimizing powerline interference with VDSL

------------------------------------------------------------


# Additional improvements in FRITZ!OS 7.00

## Powerline:
- **IMPROVED**  Option for checking and, if necessary, remedying detected interference from powerline to VDSL

## DSL 
- **IMPROVED**  Improvements for supervectoring (35b)

## Internet 
 
- **IMPROVED** Display of internet connections on the Overview page also includes WAN connections
- **IMPROVED**  Simplified display for internet connections on the Overview page under Connections
- **IMPROVED**  Function for removing the FRITZ!Box from the MyFRITZ! account (myfritz.net)
- **IMPROVED**  Optimizations for data throughput
- **IMPROVED**  Optimizations for DNS resolution
- **Improved**  Optimized registration with MyFRITZ!  (myfritz.net) also possible without enabling MyFRITZ! internet access, under Internet > MyFRITZ! Account
- *IMPROVED**  SHA-2 support for VPN connections
- **IMPROVED**  Filter for port 25 (unsecured mail sending) also effective for the Guest Access (Wireless LAN/LAN)
- **CHANGE**  Connections to 1&1 lines also with Internet Protocol version 6 (IPv6 and IPv4 Dual Stack)
- **CHANGE**  Connections to Vodafone lines also with Internet Protocol version 6 (IPv6 and IPv4 Dual Stack)
- **CHANGE**  Type of internet connection "existing connection via wireless LAN" also supports non-encrypted wireless LAN
- **CHANGE**  Parental controls no longer differentiate between Windows users
- **CHANGE**  Devices blocked for internet use in the parental controls can be reached via VPN
- **CHANGE**  Internet service provider "GMX" removed
- **CHANGE**  FRITZ!Box devices in IP client mode (as for connection to existing network) can be registered with myfritz.net
- **CHANGE**  Certificate signed by letsencrypt.org (for MyFRITZ! addresses)
- **BUG FIX**  "Default user already exists" message when configuring parental controls
- **BUG FIX**  Possible circumvention of time limits defined in parental controls
- **BUG FIX**  Circumvention of parental controls for certain blocked websites
- **BUG FIX**  The LAN ports  were switched for VPN LAN-LAN linkup
- **BUG FIX** Improved VPN interoperability
- **BUG FIX**  VPN user connections not displayed in the home network overview
- **BUG FIX**  MyFRITZ! FTP links corrected
- **BUG FIX**  MyFRITZ! access or device with MyFRITZ! access could not be deleted under certain circumstances
- **BUG FIX**  Error while entering an already assigned IP address for a new device for port sharing
- **BUG FIX** No IPv4 port sharing for devices with IPv6 interface ID during IPv4 internet connection without IPv6
- **BUG FIX**  IPv6 NAS sharing link could not be used
- **BUG FIX**  Google DynDNS service not supported
- **BUG FIX**  Static IP address with /31 network mask not possible

##Telephony:
- **IMPROVED**  Redesigned administration of call blocks for incoming calls (telephone numbers)
- **IMPROVED**  Optimized management of telephone books

##DECT: 
- **IMPROVED**  Playback of web radio and podcasts with HTTPS addresses on AVM devices (only if contents can be played back without encryption)
- **BUG FIX**  Speedphone 500 could no longer make calls

##Home network:
- **BUG FIX**  Possible error message (Error code 1) when IP address entered manually in the Device Details
- **CHANGE**  Connection Statistics area for the powerline network moved from the Network Device Details to the Contents>FRITZ!Box Support area

##Wireless: 
- **IMPROVED**  DFS wait times in the 5-GHz band optimized
- **IMPROVED**  Display of frequency bands on Wireless LAN / Radio Channel page in the "Other radio networks in your vicinity" list 
- **IMPROVED**  Improved changing of SSID in Wireless Assistant during first configuration
- **BUG FIX**  Selection of DFS channels in the 5 GHz band possible again in repeater mode
- **BUG FIX**  Display of interference sources on Wireless LAN / Radio Channel page in the "Use of the Wireless LAN Channels" list
- **BUG FIX**  The entire network environment of the base station is displayed in repeater mode

##Smart Home: 
- **IMPROVED** Support for external temperature sensor to determine room temperature
- **IMPROVED** Push notification sent when an interrupted DECT connection is restored
- **IMPROVED** Error while saving Smart Home Device names

##Security:
- **CHANGE**  The "Login without password (not recommended) option in the FRITZ!Box user interface now requires pressing a button on the FRITZ!Box

##Diagnostics:
- **IMPROVED**  Function diagnostics shows insufficient memory for saving faxes and voice messages when USB storage is full
- **CHANGE** Display of port for Diagnostics & Maintenance

##System: 
- **NEW**  Additional confirmation for certain changes can now be performed using the Google Authenticator
- **IMPROVED**  Redesigned Auto Update page
- **IMPROVED**  Event protocol on the Mesh Master also contains all events on the other FRITZ! devices in the Mesh WiFi
- **IMPROVED**  Push service sends mail after the update with additional information on the version and update progress
- **IMPROVED**  Push service change notice now also includes information on the registration of a new DECT device
- **IMPROVED**  Push service change notice on new devices in the home network now also includes information on new Mesh repeaters
- **IMPROVED**  "New FRITZ!OS" push service mail now also includes planned time of for auto updates
- **IMPROVED**  Optimized time synchronization (NTP) after internet dial-in
- **IMPROVED**  Consent to "Diagnostics and Maintenance" does not include permission for software updates
- **IMPROVED**  Simplified display for configuration of wireless LAN, LAN and WAN in the Interfaces area of the Overview menu
- **IMPROVED**  Redesigned push services overview
- **CHANGE**  For security reasons, the preconfigured user "ftpuser" can no longer be granted access from the internet 
- **CHANGE**  For FRITZ!Box users who are granted access from the Internet, the password must be different from the user name
- **CHANGE**  The security of new password assignments must be rated at least "medium" or they will be rejected.
- **CHANGE**  Additional confirmation for creating VPN connections

##USB: 
- **IMPROVED**  Message notifying about possible detriment to FRITZ!Box functions when contents deleted from the FRITZ! folder
- **BUG FIX**  System folders no longer indexed for the FRITZ! media server

USB/UMTS: 
- **BUG FIX**  Internet via mobile network not offered for all detected 3G dongles during first configuration

---

##New features for Mesh
-------------------------------------------------------------


General information on Mesh is presented at en.avm.de/mesh-networking.

-------------------------------------------------------------

**Enabling the Mesh Function**

To check whether a FRITZ! product is enabled for Mesh, see the Mesh Overview of the FRITZ!Box (the Mesh Master) under "fritz.box -> Home Network -> Mesh".
Here the products in the Mesh are designated with a corresponding "Mesh active" symbol.

A FRITZ!WLAN Repeater or FRITZ!Powerline Adapter with FRITZ!OS 6.90 or higher installed can be enabled for Mesh in various ways:
- If the product has the ex works settings configured and is being connected with the FRITZ!Box for the first time, it will be automatically enabled for Mesh.
- If the product is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box. On the FRITZ!Box, use the button that initiates WPS (depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS button for 6 seconds)

Detailed instructions, additional information and the answers to frequently asked questions about Mesh are presented at en.avm.de/mesh-faq.

-------------------------------------------------------------

**Telephony Mesh and Smart Home Mesh**

With FRITZ!OS 7.0, telephony and Smart Home are also compatible with the Mesh. 

The connections of cordless telephones and Smart Home products are displayed in the FRITZ!Box Mesh Overview. You can use a second FRITZ!Box as Mesh repeater, and use telephones registered with the second FRITZ!Box with the numbers assigned in the first FRITZ!Box, the "Mesh Master". 

-------------------------------------------------------------

**Configuring a second FRITZ!Box as a Mesh repeater with the press of a button**

Requirements:

- Your existing FRITZ!Box supports Mesh (FRITZ!OS 6.90 or higher). This box is the Mesh Master.
- The FRITZ!Box to be deployed as a Mesh repeater has been updated to FRITZ!OS 7.0 and you have restored its settings ex works. This box is to become the Mesh repeater.

Here's how:

- Connect the LAN1 port of the Mesh repeater with the Master using a LAN cable
- Initiate the Connect function on both boxes (7590: press the "Connect" button briefly; 7490: press and hold down the WLAN/WPS button for 6 seconds) 

After the connection procedure is concluded, the second FRITZ!Box is ready for operation as a Mesh repeater.  (It operates in "IP client" mode and, as a Mesh repeater, adopts the wireless LAN settings and other important settings from the FRITZ!Box). 

Please note that this function can be used only if the second FRITZ!Box is permanently connected with the first box by LAN cable. 

Instructions for configuring a FRITZ!Box connected via wireless LAN as a Mesh repeater are presented at en.avm.de/mesh-faq

------------------------------------------------------------

**Transmit the telephone numbers of a Mesh Master to another FRITZ!Box in the home network**

Once you have added an additional FRITZ!Box to the Mesh, you can configure it so that all telephone numbers are available on each FRITZ!Box. If your FRITZ!Box is connected with a landline, you can use the telephones connected to the second FRITZ!Box to make calls over the internet as well as on the landline. If the latest FRITZ!OS 7.0 is installed on both FRITZ!Boxes, the telephone numbers are transferred automatically in the Mesh once the "Telephony in the Mesh" option is enabled.

If the new FRITZ!Box is already part of the Mesh, or if you have already set up telephone numbers there, these telephone numbers must be deleted and one of the two FRITZ!Boxes must be restarted. 

Then the new FRITZ!Box must be enabled for "Telephony in the Mesh".
To do so proceed as follows:

- Click on "Home Network" in the user interface of the Mesh Master.
- Click on "Mesh" in the "Home Network" menu.
- Click on the "Mesh Settings" tab.
- In the "Use Telephony in the Mesh" section, click on the "Enable" link next to the Mesh repeater in question and then confirm this operation on the Mesh Master as well, if prompted to do so.

The telephone numbers are now distributed in the Mesh and can be assigned to your telephones and other terminal equipment for telephony (for instance, answering machines) on the FRITZ!Box.

Note: Telephony Mesh is not the same thing as DECT repeating, which requires the support of special hardware on the FRITZ!Box deployed as the Mesh Master.
If you would like to use DECT repeating, you can purchase the FRITZ!DECT Repeater 100 from an electronics retailer.

------------------------------------------------------------

**Display of 802.11k and 802.11v support on wireless devices**

FRITZ!OS now displays wireless devices that support the wireless standards 802.11k and 802.11v directly in the user interface. Both standards are already widespread for wireless devices and are important prerequisites for the further development of Mesh WiFi for the fastest, lowest-interference, and most convenient control of wireless devices in Mesh environments To find out whether your wireless devices offer support for the 11k and/or 11v standards, see the "Properties" under the Wireless / Radio Network menu, or use the "Edit" function to display the properties of each wireless device. 


------------------------------------------------------------
------------------------------------------------------------

##Additional Innovations in FRITZ!OS 7.0

------------------------------------------------------------

**What's new for the FRITZ!  Hotspot**

The new FRITZ!OS 7.0 vmakes setting up and using the FRITZ!  Hotspot even easier. It's now even easier for users to choose whether the wireless guest access should be provided as an open hotspot, or encrypted as a private hotspot. If an open hotspot is chosen, the guests do not need to enter a security key. Cafés, doctor's offices and small businesses, as well as all FRITZ!Box users, can provide their customers and visitors an easy-to-use internet access that complies with the current legal regulations. Whether it's private or public hotspot, guests cannot access the home network, but surf using a second wireless LAN provided by the FRITZ!Box. 

Secure and Complete Control

The operator of the hotspot can decide which applications can be used in the guest network and which are prohibited. Daily email messages notify the operator of the hotspot about which devices were registered in the radio network and when. Another advantage is the option to reserve bandwidth. This options allows you to specify how much of the data rate is reserved for their own wireless LAN and how much is available to their guests. 

Individual & Convenient

The Welcome page of the FRITZ! Hotspot offers additional convenience. Cafés or businesses can greet their guests with a short welcome text, photo or logo. If desired, the guests can also be requested to consent to the terms of use for the hotspot. The hotspot is also available in locations where FRITZ!WLAN Repeaters or powerline devices supporting WiFi provide for better coverage. 
------------------------------------------------------------
------------------------------------------------------------

**Increased speed when using USB storage media with NTFS data systems**

If you're using USB sticks or flash drives on your FRITZ!Box that are formatted with the data system NTFS, you can benefit from increased speed during transmission.
You don't have to do anything - just continue to use the existing USB storage media as before.
To check what data system is used, go to Home Network -> USB Storage Media in the FRITZ!Box user interface. 
------------------------------------------------------------
------------------------------------------------------------
**New security feature in the wireless LAN: "Protected Management Frames (PMF)"**

FRITZ!OS now supports additional security during registration of devices with the wireless LAN. "Protected Management Frames" ("PMF" for short) offer additional protection for the wireless connection during the setup phase.
PMF is standardized according to IEEE 802.11w-2009 and is automatically offered to or negotiated with wireless devices that support this technology. The new feature is available in the user interface under Wireless > Security > Additional Security Settings.
------------------------------------------------------------
------------------------------------------------------------
**MyFRITZ! access to your FRITZ!Box via internet now without security messages in the browser**

When you access the user interface of your FRITZ!Box from the internet, a security warning may be displayed in the browser. The new FRITZ!OS version enables your FRITZ!Box to receive a SSL certificate for your MyFRITZ! address from the organization letsencrypt.org. Browser access via the MyFRITZ! address to the interface of FRITZ!Box is no longer accompanied by a security warning, since most browsers trust the certificates from letsencrypt.org.

Proceed as follows:
1. First you need to register your FRITZ!Box with MyFRITZ!  (myfritz.net). 
2. Under "Internet / MyFRITZ!  Account", enable the "Let's encrypt" optLet's Encryption.
3. Confirm by clicking "Apply" and wait for the status "Certificate issued successfully".

Your FRITZ!Box has the certificate created for your MyFRITZ! address and uses it for browser access to this address, for example when you access your FRITZ!Box via your account on https://myfritz.net.

It's also possible to send links for FRITZ!NAS file sharing (for example photos) to third parties, who'll have access without annoying certificate warnings. This way, FRITZ!NAS becomes an even greater alternative to cloud storage services.

Note:
To receive the certificate, the TCP port 443 of your FRITZ!Box is open for a few minutes. 
The certificate is currently valid for 60 days and is then renewed by the FRITZ!Box. 
HTTPS access to your FRITZ!Box via public or local IP address, "fritz.box" in the home network or over a DynDNS provider do not use the certificate from letsencrypt. 
MyFRITZ!App: After activation of the Let's Encrypt certificate in the FRITZ!Box, the MyFRITZ!App notifies you once about the change of the certificate fingerprint. Select "trust" to continue using the new certificate.
------------------------------------------------------------
------------------------------------------------------------

**Option for assessing and, if necessary, remedying detected interference with VDSL from Powerline**

In the Internet / DSL Information / Interference Resistance menu of the FRITZ!Box, any interference with VDSL that may have been caused by FRITZ!Powerline can be minimized. This process of checking and adjusting can take up to ten minutes. During this time, the load on the powerline connection may affect the network quality and internet connection. This procedure can be repeated to optimize the interaction of VDSL with a high-performance powerline installation step by step, and the adjustmented settings can be returned to their original configuration.

This option is available only if VDSL interference was detected that could have been caused by a FRITZ!Powerline product. 
------------------------------------------------------------
------------------------------------------------------------
**Support for DECT ULE/HAN FUN**

DECT-ULE/HAN-FUN is a manufacturer-independent standard for Smart Home devices.

The following sensors passed testing with FRITZ!OS 7.0 to confirm that they work with HAN-FUN:
- SmartHome wall switches (https://www.smarthome.de/geraete/telekom-smarthome-wandtaster) 
- SmartHome door/window sensor (https://www.smarthome.de/geraete/eurotronic-smarthome-tuer-fensterkontakt-optisch) 
- SmartHome motion detector (https://www.smarthome.de/geraete/telekom-smarthome-bewegungsmelder-innen) 
Please note: The HAN-FUN devices are not supported by DECT repeaters. 
Other types of sensors can also be used as long as their manufacturers have declared them to be compatible with DECT-ULE/HAN-FUN. 
Actuators from the Telekom SmartHome product range are not supported at this time (e.g., InDoor/OutDoor adapter plugs, sirens).

Used in combination with a FRITZ!Box and the FRITZ!DECT 200/210 smart plug, they can be used to realize the following scenarios:
- Press wall switch => Outlet is switched => Light on/off 
- Motion sensor triggered => Light on in the home/garage/yard 
- Window sensor open/closed switches FRITZ!DECT 200 => connected humidifier / air purifier switches off/on
Please note during installation: The Telekom app cannot be used to install SmartHome devices to be deployed with a FRITZ!Box. The HAN-FUN devices are connected (paired) with the FRITZ!Box via the DECT button. In addition to the AVM Smart Home devices, a maximum of ten HAN-FUN devices can be registered with a FRITZ!Box.  
After successful DECT pairing, the new devices are listed in the FRITZ!Box user interface (Home Network => Smart Home) as "HAN-FUN function xxx" and their properties can be configured accordingly. 

Disclaimer: Due to the general conditions prevalent in radio technologies, as well as certain special product properties of products, AVM cannot guarantee the complete functionality of devices from other manufacturers. 
------------------------------------------------------------
------------------------------------------------------------
**Support for Speedphone 11 from Deutsche Telekom**

With FRITZ!OS 7.0 it is possible to use a Speedphone 11 with advanced telephone functions with a FRITZ!Box. 
For this the software of the Speedphone 11 must be updated. 

Please note: At the time of publication in July 2018, a corresponding update was forthcoming.
 
If the firmware version 4.01 is installed on your Speedphone 11, perform the following steps: 
1. Register the Speedphone 11 with the FRITZ!Box according to these instructions, during which the expanded security functions of the FRITZ!Box will be disabled briefly:
https://avm.de/service/fritzbox/fritzbox-7590/wissensdatenbank/publication/show/3288_Speedphone-nach-Neustart-der-FRITZ-Box-abgemeldet/ 
2. If a new Speedphone firmware is available for updating, it will be offered automatically. Alterntively, you can perform a manual check via the menu.
3. Once the firmware has been updated (> version 4.01), the security functions disabled in step one should be reactivated in the FRITZ!Box. 
4. Re-register the Speedphone 11 with the FRITZ!Box.
 
The Speedphone 11 is now available for telephone services with DECT encryption enabled. The following features were tested successfully:
- caller ID display
- caller ID
- access to the FRITZ!Box address book
- call list
- use of the FRITZ!Box answering machine

Disclaimer: Due to the general conditions prevalent in radio technologies, as well as certain special product properties of products, AVM cannot guarantee the complete functionality of devices from other manufacturers. 

---

**Instructions for installing the update:**

Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen.

---

(c) AVM GmbH 2004-2018. All rights reserved.

This AVM firmware package contains files that are propagated under different licenses, in particular under a license held by AVM or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt).
The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de. 

AVM grants the non-exclusive right to use this AVM firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use.
AVM reserves all rights that are not expressly granted to the licensee. Without previous approval in writing, and except for in cases permitted by law, it is particularly forbidden for this AVM firmware packet to be
- copied, propagated, or in any other manner made publicly accessible, or
- processed, disassembled, reverse engineered, translated, decompiled or in any other manner "opened" and subsequently copied, propagated or made publicly accessible in any other manner.



DHA 2018-11-06

[Totix92]

Provato... ancora ci sono bug non risolti...
manca ancora ancora il supporto 802.11k ... però almeno il PMF l'hanno messo, meglio di niente.
Il WiFi in generale sembra funzionare un po' meglio.

Bug non risolti:
- Impostazioni linea nel menù Internet --> Informazioni DSL --> Impostazioni di linea, non funziona ancora.
- Monitor uso cpu buggato in Sistema --> Monitor per l'energia --> Statistica
- Supporto 802.11v e 802.11k ancora mancante
- In Internet --> Informazioni DSL --> DSL, non viene ancora visualizzata la "Velocità di trasferimento DSLAM max." e "Velocità di trasferimento DSLAM min."
- In Sistema --> Monitor per l'energia --> Consumo di energia, manca ancora la voce del consumo della rete WiFi, presente invece negli altri modelli.
- Manca ancora la funzione per l'assegnazione di una certa quantità di banda per la rete ospite, funzione presente negli altri modelli.
- La banda 2.4 Ghz del repeater 1750E a volte viene segnalata dal 7581 come non collegata, quando in realtà lo è.

[strassada]

lato dsl c'è un terzo adsldd.ko "Annex A svizzero" (oltre ai 2 Annex a e B), anche lato binario (adsl_phy.bin) se ne genera uno (sempre oltre ai 2 soliti Annex).

una info che non ricordo di essermi segnato dalle vostre esperienze:
questo e altri AVM: come si comportano con le Powerline (anche quelle più potenti con più MHz)? quella features che hanno per ridurre le interferenze, funziona?

[Totix92]

Non ho un Powerline, ma la cosa mi interessa
Spero che rilascino presto un 7.02 con i bugfix mancanti...
Le premesse positive comunque ci sono tutte, devo ancora provare i cordless, se il WiFi continua ad andare bene mi sa che me lo tengo.
Il 7581 a differenza del 7490 non soffre di disturbi da parte delle porte USB 3.0
Edit: Dopo segnalerò tutti i bug rimanenti ad AVM, fatelo anche voi, così magari presto ci mettono mano e avremo un ulteriore bugfix.

[strassada]

Originariamente inviato da Totix92

Non ho un Powerline, ma la cosa mi interessa

idem (per quanto stia cercando di far cablare il più possibile, potrebbe comunque essermi utile per raggiungere un paio posizionamenti di vari device)

proverò a spulciare il relativo thread e cercare online, diciamo che non è nei miei desideri usarla ma trasferitomi al pian terreno devo comunque valutare

[the lizard king]

Eco-dect?

[Totix92]

Originariamente inviato da the lizard king

Eco-dect?

Funziona? Io ancora non ho provato
Edit: sembra funzionare, finalmente!!

[the lizard king]

A me non va ancora eco dect..con un fritz fon..non c'è speranza

[Totix92]

Originariamente inviato da the lizard king

A me non va ancora eco dect..con un fritz fon..non c'è speranza

Hai fatto un reset completo del fritzbox? io ho riconfigurato tutto e funziona, boh.

[Intel-Inside]

Sapete dirmi se è possibile non fare il Reset dopo l'aggiornamento?
Mi viene male a pensare di dover reinserire tutte e 50 piu o meno abilitazioni porte...

[Totix92]

Originariamente inviato da Intel-Inside

Sapete dirmi se è possibile non fare il Reset dopo l'aggiornamento?
Mi viene male a pensare di dover reinserire tutte e 50 piu o meno abilitazioni porte...

Se ti funziona tutto non ce n'è bisogno.

[Intel-Inside]

Ok ottimo, potete dirmi se dopo l'aggiornamento rimane tutto com'era prima? configurazioni, voip, ddns etc... non devo reimpostare nulla giusto?

[scare19]

Bufferbloat A ottenuto mettendo quale prioritizzazione e dove ?

[Totix92]

Originariamente inviato da Intel-Inside

Ok ottimo, potete dirmi se dopo l'aggiornamento rimane tutto com'era prima? configurazioni, voip, ddns etc... non devo reimpostare nulla giusto?

Rimane tutto come prima, ma se noti qualche problema ti consiglio un bel reset, se poi non ne noti meglio così.

[Totix92]

Nulla... il 7581 a me proprio non va bene con il WiFi, non è paragonabile al 7490 e inoltre quest'ultimo mi aggancia sempre almeno 3 Mbits in più, ho rimesso su il 7490... ho fatto provare fino a qualche giorno fa il 7581 ad un amico e a lui invece il WiFi va benissimo... misteri
Inoltre provando meglio il DECT Eco, non funziona ancora correttamente... ma li provano i firmware prima di rilasciarli? Potevano ancora continuare con la fase beta... ancora ci sono diversi bug, tra l'altro noti da tempo.