(ROMA-SP) SAS SCSI 10k 15k LSI 320-2e Adaptec HARD DISK MAX PERC 5/i SATA 2610s

[ILGRECO1974]

Vendo materiale scsi / SAS / SATA (alcuni hd 10k , 15k , schede pci , pcix e pci-e , cavi ) controllers e alcuni cavi SAS , controllers sata :

MATERIALE SCSI :

1) 3 FUJITSU MAW (modelo Fujitsu MAT piu recente) 73gb 10k 10.000 RPM u320 80pin NUOVI OEM Worldisk

37e cad!!!

2) 2 FUJITSU MAW (modelo Fujitsu MAT piu recente) 147gb 10k 10.000 RPM u320 80pin NUOVI OEM Worldisk
77e cad !!!!

b)2 FUJITSU MAW (modelo Fujitsu MAT piu recente) 147gb 10k 10.000 RPM u320 68pin NUOVI OEM Worldisk
87e cad !!!!

MAW 73 / 147gb :
Disco 10.000rpm velocissimo , inudibile a idle !
http://www.storagereview.com/php/ben...bench_sort.php
(MAT3300)
[img=http://img3.imageshack.us/img3/2248/matg.th.jpg]


PHYSICAL SPECIFICATIONS
Formatted storage capacity 73.5 GB
Form Factor 3.5-inch x 1-inch high
Mounting screws 6#32UNC
Seek time (track to track) Read 0.2 / Write 0.4 milliseconds
Seek time (average) 4.5/5.0 milliseconds (read/write)
Seek time (full track) 10.0/11.0 milliseconds (read/write)
Average latency time 2.99 milliseconds
Rotational speed 10,025 RPM
Data Buffer Size 8 MB
Recording code 32/34 MEEPRML
Interface 68 pin (NP Series) U320 SCSI
Head positioning method ROTARY VCM
Spindle start time 30 seconds typical
Spindle stop time 30 seconds typical
Power requirement Idle (ready) 9.5 W (typical)
Height 25.4 millimetres
Width 101.6 millimetres
Depth 146.0 millimetres
Weight 0.75 kg
Ambient temperature (operating) 5 to 55 degrees C
Ambient temperature (non-operating) -40 to 70 degrees C
Maximum DE surface temperature (operating) 55 max deg. C
Gradient 15 degrees C per hour
Relative humidity (operating) 5 to 95 % RH (non-condensing)
Relative humidity (non-operating) 5 to 95 % RH (non-condensing)
Maximum wet bulb 29 degrees C (non-condensing)
Vibration (operating) 0.6mm (5 to 20 Hz)/ 1.0G (20 to 300 Hz)
Vibration (non-operating) 3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz)
Shock (operating) 65G Max (2ms)
Shock (non-operating) 225G Max (2ms)
Altitude (operating) 3,000 metres
Altitude (non-operating) 12,000 metres
Acoustic noise (at 1 metre idle) 3.4 bels
MTBF (Mean Time Between Failures) 1,200,000 power on hours


Unrecoverable errors 1 per 10^15 bits read
Seek errors 10 per 10^8 seek

4)4 FUJITSU MAX (MAU) 147GB 15K 15.OOO RPM 68 PIN NUOVI FUJITSU ORIGINALI CON MANUALE
I dischi 15k piu veloci in giro !!!


Fujitsu 147GB 15000 RPM Ultra320 SCSI 68-pin hard drive MAX3147NP, RoHS Compliant.

Fujitsu's latest generation of Rohs compliant 15K Enterprise SCSI Hard Disk Drives offer capacities of up to 147GB in a 1-inch high, 3.5-inch form factor.
The MAX SCSI series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications.

The MAX (NP) series comes with a 68-pin interface connector, spindle speed of 15K RPM and capacities of 36, 73 and 147GB. Areal density has doubled and internal drive transfer rates have been increased by 24% to 147 MB/s when compared to the previous MAP series. The drive is also equipped with an 8MB multi-segmented data buffer combined with a 32-bit wide internal data path for faster data access.
#

Formatted storage capacity 147.0GB
#

Form Factor 3.5-inch x 1-inch high
#

Mounting screws 6#32UNC
#

Seek time (track to track) Read 0.2 / Write 0.4 milliseconds
#

Seek time (average) 3.3/3.8 milliseconds (read/write)
#

Seek time (full track) 8.0/9.0 milliseconds (read/write)
#

Average latency time 2.00 milliseconds
#

Rotational speed 15,000 RPM
#

Data Buffer Size 8 MB
#

Recording code 32/34 MEEPRML
#

Interface 68 pin (NP Series) U320 SCSI
#

Head positioning method ROTARY VCM
#

Spindle start time 30 seconds typical
#

Spindle stop time 30 seconds typical
#

Power requirement Idle (ready) 11.5 W (typical)
#

Height 25.4 millimetres
#

Width 101.6 millimetres
#

Depth 146.0 millimetres
#

Weight 0.75 kg
#

Ambient temperature (operating) 5 to 55 degrees C
#

Ambient temperature (non-operating) -40 to 70 degrees C
#

Maximum DE surface temperature (operating) 55 max deg. C
#

Gradient 15 degrees C per hour
#

Relative humidity (operating) 5 to 95 % RH (non-condensing)
#

Relative humidity (non-operating) 5 to 95 % RH (non-condensing)
#

Maximum wet bulb 29 degrees C (non-condensing)
#

Vibration (operating) 0.6mm (5 to 20 Hz)/ 1.0G (20 to 300 Hz)
#

Vibration (non-operating) 3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz)
#

Shock (operating) 65G Max (2ms)
#

Shock (non-operating) 250G Max (2ms)
#

Altitude (operating) 3,000 metres
#

Acoustic noise (at 1 metre idle) 3.6 bels
#

MTBF (Mean Time Between Failures) 1,200,000 power on hours
#

Component life (years)
#

Unrecoverable errors 1 per 10^15 bits read
#

Seek errors 10 per 10^8 seeks
125e cad !!!


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++


+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
5)4 cavi scsi LVD/SE U320 con terminatore attivo e 6 connettori 68pin (Si possono collegare fino 4 dischi scsi 68pin oppure 5hds se non viene collegato il terminatore ) . Nuovi mai usati .

13,00e cad


6) 3 adapters u320 80-68pin nuovi
6,00e cad




7) 4 cavi tipo round LVD/SE 2 connettori per solo 1 hd (perfetto per installare un disco sulla 29160N - 2100s - MR 500) . Nuovi mai usati .




6e cad



8) 1 schedea scsi RAID PCI ULTRA160 LSI original megaraid express 500 .
Web bios support .
32mb ram , intel cpu , riconosciuta automaticamente da win xp , vista compatibille .


http://www.lsilogic.com/obsolete/meg...te=1&locale=EN




35e !

9) 1 CONTROLLER SCSI RAID U160 32MB PCI ADAPTEC 2100S ORIGINAL , 32mb ram , intel cpu , riconosciuta automaticamente da win xp compatibile vista 32bit , gia provato , basta caricare il driver x winxp :
http://www.adaptec.com/en-US/speed/r...v_v314_exe.htm


http://www.adaptec.com/en-US/support...aid/ASR-2100S/
La soluzione perfetta per raid su pci ! Il massimo che potete avere dallo slot pci .

35e !

10) 1 scheda scsi RAID PCI DUAL ULTRA160 LSI Elite 1600 128 MB con bateria pci 64bit - 32bit ,
Web bios support 2 canali interni u160 (320mbs total ) , 2 esterni u160
128mbram , intel cpu , riconosciuta automaticamente da win xp e vista .
Compatibile pci 32bit e 64 bit
50.00e

21)CONTROLLER SCSI pci-x (32bit compatibile) ultra320 LSI 20320 HP U320 , 1 canale u320 interno , vista -xp ok , new,mai usato



45e

11)1 LSI PCI 32-64bit (anche PER PCIX) MEGARAID 320-2 128mb + Battery (2 canali int , 2 camali esterni ) u320 LVD
http://www.lsi.com/storage_home/prod...202/index.html


105.00e !!!

12)1 LSI PCI 32-64bit (anche PER PCIX) MEGARAID 320-1 64mb (1 canale int , 1 camale esterno ) u320 LVD (NO DELL-LSI ORIGINAL)115e
http://www.lsi.com/storage_home/prod...201/index.html

Product Description

MegaRAID SCSI 320-1

With support for 64-bit addressing and a full RAID feature set, the MegaRAID® SCSI 320-1

delivers unsurpassed data throughput and fault tolerance for your mid-range server or performance workstation.

Quick installation and setup capabilities along with easy-to-use management utilities make the MegaRAID SCSI 320-1

the first choice of OEMs, system integrators, and value added resellers (VARs) worldwide.

Designed around LSI next-generation I/O technology (Fusion-MPT™), the MegaRAID SCSI 320-1 leverages a streamlined firmware-level programming interface

and advanced hardware designs to offer unequalled I/O efficiency and performance.

The MegaRAID SCSI 320-1 also incorporates a space-saving MD2 (low-profile PCI) form factor, increasing available space,

even in the most limited server and workstation enclosures.

Features

* One single-channel LSI53C1020 Ultra320 SCSI controller
* IA-64 ready
* Intel® GC80302 integrated I/O processor
* 64-bit, 66 MHz PCI
* PCI 2.2 compliant
* Integrated 64MB ECC SDRAM cache memory
* Advanced management and configuration utilities
* Supports up to 40 logical drives per controller
* Auto resume during array reconstruction
* Background initialization for Quick RAID 5 setup
* FlexRAID®:
o Online capacity expansion
o Online RAID level migration

Benefits

* Fast Ultra320 performance
* Intelligent IOP-powered RAID solution
* Array availability in minutes
* FlexRAID support
* Battery backup unit available
* Low profile form factor
* http://www.lsi.com/storage_home/prod...201/index.html
82e !!!!!

13)1 ADAPTEC 29160 u160 , perfetta per installare 1-2 dischi 15k su qualsiasi MOBO !!!!!
25e


14)1 adaptec 39160 2x u160 , doppio canale , ottima come la sorella minore 29160
30e

15)1 DELL LSI MEGARAID 320-2e pci-express 128mb bateria on board ,winxp-vista ready . La soluzione raid perfetta , CONTROLLER POTENTISSIMO, pci express !!!
MEGARAID LSI CONSOLE PLUS COMPATIBILE !

170 euro !

16)1 LSI 320-2x pci-x u320 256mb + BBU

135e !!
Il controller scsi più potente che esiste !

LSI MEGARAID 320-2X + BBU ( BATTERY MODULE)
pci 64bit PCIX 133mhz ( no pci 32 bit !!! )
400MHZ Intel® Xscale® IOP321 integrated I/O processor

BULK ORIGINAL LSI CARD

MEGARAID 320-2x 256mb DDR ECC REG BATTERIA INCLUSA

VISTA 32bit / 64bit compatibile , non occorrono drivers


Controller memorizzazione dati (RAID)

2 Canali u320 interni , 2 u320 canali esterni
Ultra320 SCSI - PCIX - 2x 320 MBps - RAID 0, 1, 5, 10, 50





Scheda scsi potentissima

Perfetta per configurazioni Raid



http://www.lsi.com/storage_home/prod...02x/index.html
http://www.lsi.com/files/docs/market...X_PB-Final.pdf


MATERIALE SAS/SATA

17)1 controller DELL PERC 5/i RAID Controller PCI-E SCSI SAS SATA 256MB CON STAFFA D' AGGANCIO !!!!!!!!!
OEM VERSION OF LSI SAS CARD , SUPPORTA IL SOFTWARE DELLA LSI MEGARAID STORAGE MANAGER :



La scheda e' stata anche testata sulla mia asus p5wdg2 WS PRO , ultimo firmware upgraded !!!

Highlights

* Offers support for RAID levels 0, 1, 5, 10, and 50
* Works with OpenManage Server Assistant to enable online configuration and monitoring of many servers
* Provides maximum bandwidth of 12 Gbps per SAS connector
* OpenManage Server Administrator facilitates monitoring of a single server and online configuration

Overview

Enterprise class PROTECTION and PERFORMANCE

The Dell™ PERC 5/i RAID Controller Card is a PCI Express® based Serial Attached SCSI RAID controller that provides ultimate performance, data protection and scalability for external SAS RAID applications.

With support for RAID levels 0, 1, 5, 10, and 50; the PERC 5/i provides multiple protection options to suit a wide range of applications and non-critical data. It features a high-bandwidth x8 PCI-Express® host interface, 256 MB DDR2 Transportable Battery Backed cache, and 3 Gbps SAS technology. PCI Express® provides a high performance point-to-point link for interconnecting devices and transmitting data. It includes a powerful Intel® IOP333 processor with XScale® Microarchitecture along with a 256 MB DDR2 memory for read and write cache. This product has been tested and validated on Dell™ systems. It is supported by Dell™ Technical Support when used with a Dell™ system.
Tech Specs
Interface Type Port(s) Total ( Free ) / Connector Type
x8 PCI Express® 2 (external SAS x4)
RAID Level Slot(s) Required
0, 1, 5, 10, 50 PCI Express®
Cache / Buffer Size Data Transfer Rate
256 MB Up to 3 Gbps
Device Type
RAID Controller Card

DRIVERS ( winxp , vista, linux ) / SOFTWARE DELL :
http://search.dell.com/results.aspx?...L%20PERC%205/i



>>> 132,00e !!!! <<<<

18a)
2x CAVO SAS PER SATA HD (si possono coleggare 4 hd sata )

16e


18b)
2x cavi sas per dischi sas/sata (si possono coleggare 4 hd sas/sata )



21e cad

18c)2 BBU BATERIA per il PERC 5/I NUOVE




27E CAD

>>>>>> con 3,00e di piu fornisco anche il cavetto di colegamento per la batteria !



19) 5 HARD DISK SAS MAX 36,6gb 15k , ultimo modello fujitsu 15k , disco veramente incredibile , usati pocchissimo , come nuovi ,

45e cad !!!!!!!


36GB MAX3036RC SAS Internal Hard Drive
With the latest advances in interface technology, the MAX3036RC series provides a cost effective storage solution that meets even the most demanding enterprise storage requirements.



* Serial Attached SCSI connector
* 3.3ms Average seek time / Up to 15000rpm performance
* Spindle speed is 15000rpm / Buffer size is 16MB cache



Fujitsu's 36GB MAX3036RC is the latest of compliant 15K enterpirse hard disk drives, offering capicities of up 36GB, and increased transfer rates. The MAX3036RC's interface (Serial Attach SCSI (SAS)) series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications. The MAX (RC) series comes with a dual ported hot-swap SAS interface connector and spindle speeds of 15K RPM. Areal density has doubled and the drive is also equipped with an 8MB multi-segmented data buffer combined with a 32-bit wide internal data path for faster data access.
36GB MAX3036RC SAS Internal Hard Drive
Connectivity
Connector Serial Attached SCSI
Connector Type SAS
General
Enclosure Type Internal
Form Factor 3.5"
Target Use Computer
Performance
Average Seek Time 3.3 ms
Buffer Size, Cache 16 MB
Data Transfer Rate 3 Gbps
Storage
Hard Drive Capacity 36.7 GB
Spindle Speed 15000 rpm
Contents hard drive, documentation
Physical Dimensions 1" h x 4" w x 5.8" d
Ports/Connectors SAS / Serial Attached SCSI 3.0Gb/s port
Power Notes Power Requirements:
Voltage: 5 V ± 5%, 12 V ± 5%
Spin-up: 12 V ± 5% @ 2.5 A (peak)
5 V ± 5% @ 0.7 A (peak)
Idle (typ.) 11.5 W

45e cad !!!!!!!

21) 4 HD sas 2,5" 10k 36,7gb nuovi , mai usati 38e cad !!!!!


Fujitsu MAY SAS Series

Overview

As a point-to-point connection, Fujitsu SAS hard disk drives help enterprises develop new solutions and maintain flexibility. The RoHS compliant, 2.5-inch hard disk drives offer up to 73.5GB of storage and 10K RPM - a perfect combination for high-end, mission-critical applications residing on database servers, storage arrays, and NAS and SAN systems.

With the 2.5-inch form factor, a greater number of SAS drives can be installed in the space previously occupied by conventional 3.5-inch enterprise hard disk drives, resulting in improved input-output (IO) performance. Additionally, lower power consumption helps systems maintain reduced heat levels. The drives are also hot pluggable, so they can be inserted or removed without harming the data or the system while the entire system is still powered on.

The 3Gb SAS interface of the Fujitsu hard disk drives allows customers to take advantage of the increased performance associated with serial attached SCSI, while providing lower heat dissipation and lower acoustics.State-of-the-art hard disk drives for your most demanding enterprise applications

* 2.5-inch RoHS compliant Enterprise Hard Disk Drives offer 10K RPM spindle speed and feature storage capacities up to 73 GB
* Mean-time-between-failure (MTBF) of 1,400,000 power-on hours
* The industry's first 2.5-inch small form factor Serial Attached SCSI (SAS) interface
* Native Command Queuing (NCQ), providing faster execution of operation commands
* Uses smaller connectors and cables than U320, a benefit acknowledged by the SCSI Trade Association (STA)

Drive Features

* Small Form Factor HDD: The adoption of 2.5" form factor to enterprise HDD, the required space is reduced up to 73% in comparison with previous 3.5" form factor enterprise HDD. This enables the installation of more number of HDDs into same area space.
* High Performance: It is possible to install more number of HDD in comparison with 3.5" HDD in same space, IO performance (*1) is improved under the system configuration.
* High Speed Interface: Serial Attached SCSI which is the New serial interface enables the High Speed Interface capability up to 3Gbits per second.
* Low Power Consumption: Power consumption requirement has reduced to 4.5 Watts (Idle). It achieves up to 53% lower power consumption in comparison with 3.5" HDD. (The comparison with Fujitsu products)
* Improvement for Shock Tolerance: FDB (Fluid Dynamic Bearing) spindle motor (*2) and Head Load/Unload mechanism (*3) enable in high shock torelance. The drives withstand up to 400Go-p (duration 1ms) non-operating shock and up to 100Go-p (duration 1ms) operating shock.
* RoHS Compliance (MAY series only): This HDD is designed to meet the requirements of the European Union's RoHS directive.
FUNCTIONAL SPECIFICATIONS
Model MAY2036RC MAY2073RC
Functional Specifications
Storage capacity (formatted) 36.7GB 73.5GB
Disks 1 2
Heads (read/write) 2 4
Bytes/Sector 512
Seek time Track to
track Read: 0.2 ms (typ) / Write: 0.4 ms (typ)
Average Read: 4.0 ms (typ) / Write: 4.5 ms (typ)
Full stroke Read: 8.0 ms (typ) / Write: 9.0 ms (typ)
Average latency 2.99 ms
Rotational speed (RPM) 10,025 rpm
Areal density 70.2 Gbits/sq. in. (max.)
Data transfer rate 3Gbps
Recording code 32/34 MEEPRML
Interface SAS
Head positioning method Rotary VCM
Start time 15 s (typ)
Stop time 15 s (typ)
Buffer size 16 MB

38e cad !!!!!


MATERIALE SATA :

22)1 controller sata RAID 6x SATA HP ADAPTEC 2610SA BOXATO SIGILLATO NELLA SUA CONFEZIONE ORIGINALE
DESCRIPTION:

This is a 6 channel Serial ATA RAID controller card that supports a variety of configurations including 0, 1, 5, 10, and JBOD. Functionally and operationally,

it is identical to the Adaptec 2410SA, except it gives you 2 EXTRA ports (or a 2810SA with 2 less ports). It is running the latest firmware, and is supported by both Adaptec 2x10SA drivers, and HP drivers.

All recent versions of Linux natively support this as an "afa" device. Works in HP& non-HP systems equally well.

Highlights

* Intel Intelligent I/O processor
* 64MB Cache
* RAID 0, 1, 10, 5 and JBOD
* Online Capacity Expansion
* RAID Level Migration
* 48-bit LBA supports large drives & Multi Terabyte Arrays




TECHNICAL SPECIFICATION:

Supported Operating Systems
* Microsoft Windows XP Professional
* Microsoft Windows XP Home Edition
* Microsoft Windows 2000 Advanced Server
* Microsoft Windows 2000 Server
* Microsoft Windows 2000 Professional
* Microsoft Windows Server 2003
* NetWare 6.5 SP 1.1A
* Red Hat Linux
* SuSE Linux
* SCO UnixWare
* Caldera OpenUnix

Benefits
* Advanced RAID features for high-end workstations and entry-level SATA servers.

Key Differentiators
* Optimized Disk Utilization
* RAID Level Migration
* Online capacity expansion
* Background initialization (for immediate RAID availability)
* Enclosure Management ready
* Hot-swap disk drive support for easy replacement
* Hot-spare disk support with automatic rebuild
* Supports bootable arrays

Customer Needs
* Ideal for workstations as well as entry-level servers requiring advanced RAID features and supporting up to four Serial ATA drives

System Environment
* Desktop

Cache Memory
* 64 MByte (onboard)

RAID Levels
* 0, 1, 5, 10, JBOD

Key RAID Features
* Optimized disk utilization
* Online RAID Level Migration
* Online capacity expansion
* Immediate RAID availability (background initialization)
* S.M.A.R.T. support

Number of Devices
* Up to 6 Serial ATA drives

Bus System Interface Type
* 64-bit/66MHz PCI

Internal Connectors
* Six Serial ATA ports

Data Transfer Rate
* Up to 1.5 Gbits/sec
System Requirements
* Available PCI slot meeting PCI 2.2 specification


100,00 euro !!!!!


Rules:
1)Precedenza consegna a mano
2)Precedenza al blocco
3)Vendita anche altrove
4)Pagamento prima della sped, solamente tramite Postepay
5)Tutti i prezzi sono s.s ESCLUSE.
6)Durata massima di una coda 24ore
7)Non mi assumo responsabilità per le spedizioni delle Poste
8)Eventuali proposte sul prezzo solo via pm , prezzo pocco tratabile e SOLO per acquisto al blocco .
__________________
FUJITSU MAU 73gb 15.000 rpm
LSI 320-2e Adaptec 29160 HARD DISK SCSI 10k 15k MAU SAS SATA 2410sa
__________________
Vendo materiale sas/scsi/sata

[ILGRECO1974]

risposto a PMs..
Per quelli che chiedono info per i dischi scsi , i dischi 10k/15k scsi/sas si possono installare a qualsiasi PC normale (per installare un disco scsi basta solo una scheda scsi pci u160 da 25e !!! ) e aumentano le prestazioni del pc , un disco 15k di ultima generazione ha 5,6-5,8ms tempo d' accesso !

[ILGRECO1974]

[ILGRECO1974]

UP

[Andrea87]

ciao, sarei molto interessato all'acquisto di due hdd scsi o sas con il controller. Quello che vorrei ottenre è prestazioni molto bunoe senza spendere troppo e a quanto ho visto sarebbe ampiamente fattibile con due MAW da 73GB. Quale dei controller che vendi potrei abbinare per sfruttarli al massimo? (ovviamente senza spendere troppo )
Tuttavia dato che la capacità non è ciò che mi interessa di più potrei anche essere interessato a due SAS da 36gb, però ho visto che soprattutto il controller mi obbligherebbe a spendere qualcosa in più. Tenuto conto che li userei in raid 0, ho un vantaggio prestazionale molto significativo dei SAS rispetto agli scsi?
E rispetto a una coppia di samsung F1 da 320 in raid 0? (tenuto conto di condizioni ottimali, cio è partizioni non molto grandi, hard disk deframmentati eccecc)

[ILGRECO1974]

Originariamente inviato da Andrea87

ciao, sarei molto interessato all'acquisto di due hdd scsi o sas con il controller. Quello che vorrei ottenre è prestazioni molto bunoe senza spendere troppo e a quanto ho visto sarebbe ampiamente fattibile con due MAW da 73GB. Quale dei controller che vendi potrei abbinare per sfruttarli al massimo? (ovviamente senza spendere troppo )
Tuttavia dato che la capacità non è ciò che mi interessa di più potrei anche essere interessato a due SAS da 36gb, però ho visto che soprattutto il controller mi obbligherebbe a spendere qualcosa in più. Tenuto conto che li userei in raid 0, ho un vantaggio prestazionale molto significativo dei SAS rispetto agli scsi?
E rispetto a una coppia di samsung F1 da 320 in raid 0? (tenuto conto di condizioni ottimali, cio è partizioni non molto grandi, hard disk deframmentati eccecc)

Risposto ,
hai PM

[Andrea87]

Risp anche io, ora vedo quanti € mi vengono dati.

[misterx78]

in coda x HARD DISK SAS MAX 36,6gb 15k FUJITSU modello MAX3036RC a 45€
sono ancora in garanzia?
grazie ^^

[ILGRECO1974]

Non sono in garanzia , non esiste una garanzia diretta da fujitsu per i suoi dischi , ma i dischi sono perfettamente funzionanti e il loro prezzo e' veramente molto basso Quanti te ne servono?
Ciao

[ILGRECO1974]

Originariamente inviato da misterx78

in cosa x HARD DISK SAS MAX 36,6gb 15k FUJITSU modello MAX3036RC a 45€
sono ancora in garanzia?
grazie ^^

PM

[banaz]

coda due max 36gb + cavo per collegarli...

mandami coordinate per ricarica postpay che te la faccio subito

[ILGRECO1974]

Originariamente inviato da banaz

coda due max 36gb + cavo per collegarli...

mandami coordinate per ricarica postpay che te la faccio subito

Hai pm

[banaz]

pagamento effettuato pochi minuti fa
aspetto tracking della spedizione

[ILGRECO1974]

Grazie .
Appena spedisco ti faccio sapere il n. di tracking .
Ciao

[Yota79]

Ma il controller SATA è solo SATA o anche SATA2?

[ILGRECO1974]

Originariamente inviato da Yota79

Ma il controller SATA è solo SATA o anche SATA2?

Ciao
Quale controller ti interessa ?
Il 2610sa adaptec ?
Mi sembra che e'sata2 , devi vedere un attimo le specifiche , ma anche se e' sata1 non influisce sulle prestazioni del disco , visto che la banda sata1 basta e avanza per tutti i dischi sata in giro !

[ILGRECO1974]

[Obelix-it]

Originariamente inviato da ILGRECO1974

21) 4 HD sas 2,5" 10k nuovi , mai usati 38e cad !!!!!

Interessato a questi, ma di che capacita' sono ???

Originariamente inviato da ILGRECO1974

7) 4 cavi tipo round LVD/SE 2 connettori per solo 1 hd (perfetto per installare un disco sulla 29160N - 2100s - MR 500) . Nuovi mai usati .

Questi cavi hanno anche il terminatore? Se si, potrebbero interessarmene un paio..

[ILGRECO1974]

I sas fujitsu may 10k sono da 36,7gb .
I cavi per 1 HD non hanno terminatore (un connettore per la scheda e uno per il disco /back-plate) , con terminatore sono quelli per 2 e r 4 dischi che ho in vendita . Tutti i cavi sono nuovi e u320 .
Ciao .

[ILGRECO1974]

Originariamente inviato da banaz

pagamento effettuato pochi minuti fa
aspetto tracking della spedizione

Spedito oggi .
Hai pm per il tracking .
Ciauzzz