Overclock KT133A

Overclock KT133A

di pubblicata il , alle 08:56 nel canale Uncategorized
 
Overclockers.com ha spiegato, con questo interessante articolo, uno dei problemi che in questi giorni molti overclockers stanno riscontrando con le loro schede madri Socket A basate su chip Via KT133A: in poche parole, nonostante si proceda a sbloccare il moltiplicatore della cpu, al boot il processore utilizza il moltiplicatore di frequenza di default per alcuni millisecondi. Abbinando questo all'elevata frequenza di bus di 133 Mhz è possibile che il sistema si rifiuti del tutto di partire in quanto per pochi millisecondi richiederebbe una frequenza di clock eccessivamente elevata:
Upon a boot, the Duron/Athlon, for several milliseconds, operates at the multiplier provided by the BP/FID pins of the processor, no matter what you've said otherwise through the motherboard.

So, for instance, if you have a 1Ghz TBird, and you are trying to run the processor at 133Mhz, the processor will try to run for a few milliseconds at 10X133. If it can, it then moves on to whatever settings you've used per motherboard BIOS/jumpers. If it can't (which is probably most often the case), then it goes nowhere.

The reason why we haven't noticed this in the past is because we never could run significantly higher bus speeds due to the limitations of the KT133 chipset. All we did was increase the multiplier.

In the case of a high-multiplier TBird/Duron with a KT133A, we are doing the opposite; we are decreasing the multiplier from the original to compensate for the increased bus speed.
0 Commenti
Gli autori dei commenti, e non la redazione, sono responsabili dei contenuti da loro inseriti - info

Devi effettuare il login per poter commentare
Se non sei ancora registrato, puoi farlo attraverso questo form.
Se sei già registrato e loggato nel sito, puoi inserire il tuo commento.
Si tenga presente quanto letto nel regolamento, nel rispetto del "quieto vivere".

La discussione è consultabile anche qui, sul forum.
 
^