[Thread Ufficiale] Asus DSL-N55U rev. A1 - Modem/Router ADSL Dual-Band Wireless-N600

[Trotto@81]

Non vorrei farlo, ma mi sa che saluto questo glorioso dispositivo dopo sette anni di uso H24. Sulla banda a 5 GHz non riesco mai ad avere bitrate costantemente al massimo, come accade invece sulla banda a 2,4 GHz e sono a tre metri scarsi dal router senza ostacoli frapposti.
Pensavo fosse il mio chip wifi, ma non credo il calo della qualità che ogni tanto compare sulla 5 GHz (con calo drastico del bitrate) sia da imputare al PC, ma alla parte trasmittente. Magari mi sbaglierò, ma una prova con un nuovo dispositivo devo farla.

[Trotto@81]

Niente, medesimo comportamento anche con un Fritz 7590. Il problema non era legato al router wifi, quindi il problema è del chip wifi o dei driver. Scusatemi per l'OT.

[Maxtone]

Ho un problema con questo router, che ho ripreso ieri perchè volevo usarlo come access point per il soggiorno a casa.

Vi racconto tutto, attacco il router ad una porta del FASTGATE mi collego al solito IP 192.168.1.1 e si apre la config del router.
Setto tutto e funziona, differenzio le wifi e setto in router ASUS no DNS.

Stacco tutto e porto in soggiorno il router attacco tutto e non funziona niente.
Vebbè riporto il router asus vicino al fastgare lo riattacco allo stesso cavo di prima.. e non risponde più non riesco a collegarmi più via il 192.168.1.1 all'interfaccia .. niente.
Faccio un collegamento PC ASUS diretto settando IP anche al PC 192.168.1.50 ma niente non va proprio, l'unica cosa che va è il wifi.
Faccio la cappellata di retettare il router e perso le connessioni wifi che avevo creato, adesso mi ritrovo con ASUS e ASUS5G.

La mia domanda qualcuno sa le pwd di queste due LAN??

A qualcuno è capitato che le porte Switch RJ45 non rispondessero più?

Grazie a chi mi aiuta

[Djambe]

Anche a me il dsln55u sta cominciando a perdere i colpi perdendo la connessione quando il firewall ed il NAT sono sotto stress. Ormai la mia rete domestica i è fatta complessa e necessito di creare VLAN.
Voglio prendere il Mikrotik Hap Ac² e utilizzarlo come router+AP.
Come posso utilizzare il dsln55u come solo modem? basta disattivare DHCP?

[diamondlover]

Ciao ragazzi, qualcuno ha ancora il file del firmware 374.158? Nel primo post il link è morto... Mi andrebbe bene anche il 3.0.0.4.364...
Grazie in anticipo!

[Trotto@81]

Lo avevo già messo io il link, bastava una ricerca. Lo trovi qui.

[Maxtone]

Qualcuno mi può aiutare, non mi va più lo switch del router in pratica se attacco un cavo di rete dal PC al router non lo vede.

Questo il log del router dopo il riavvio:

Aug  1 02:00:09 syslogd started: BusyBox v1.17.4
Aug  1 02:00:09 kernel: klogd started: BusyBox v1.17.4 (2016-07-28 21:27:37 CST)
Aug  1 02:00:09 kernel: Linux version 2.6.2219 (root@asus) (gcc version 3.4.2) #10 Thu Jul 28 21:28:12 CST 2016
Aug  1 02:00:09 kernel:  The CPU feqenuce set to 500 MHz
Aug  1 02:00:09 kernel: CPU revision is: 0001974c
Aug  1 02:00:09 kernel: Determined physical RAM map:
Aug  1 02:00:09 kernel:  memory: 08000000 @ 00000000 (usable)
Aug  1 02:00:09 kernel: Built 1 zonelists.  Total pages: 32512
Aug  1 02:00:09 kernel: Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
Aug  1 02:00:09 kernel: Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Aug  1 02:00:09 kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.
Aug  1 02:00:09 kernel: cause = 40808000, status = 11000000
Aug  1 02:00:09 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Aug  1 02:00:09 kernel: calculating r4koff... 001e8480(2000000)
Aug  1 02:00:09 kernel: CPU frequency 500.00 MHz
Aug  1 02:00:09 kernel: Using 250.000 MHz high precision timer.
Aug  1 02:00:09 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug  1 02:00:09 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Aug  1 02:00:09 kernel: Mount-cache hash table entries: 512
Aug  1 02:00:09 kernel: RALINK_PCI_PCICFG_ADDR = 0
Aug  1 02:00:09 kernel: ***** Ralink PCIe RC mode *****
Aug  1 02:00:09 kernel: registering PCI controller with io_map_base unset
Aug  1 02:00:09 kernel: 2->[1][0][0][30]=0
Aug  1 02:00:09 kernel: 5->[1][0][0][30]=fffffffe
Aug  1 02:00:09 kernel: 2->[1][0][0][30]=0
Aug  1 02:00:09 kernel: 5->[1][0][0][30]=0
Aug  1 02:00:09 kernel: BAR0 at slot 0 = 0
Aug  1 02:00:09 kernel: bus=0, slot = 0x0
Aug  1 02:00:09 kernel: P2P(PCI) 0x00 = 08021814
Aug  1 02:00:09 kernel: P2P(PCI) 0x04 = 00100007
Aug  1 02:00:09 kernel: P2P(PCI) 0x08 = 06040001
Aug  1 02:00:09 kernel: P2P(PCI) 0x0c = 00010000
Aug  1 02:00:09 kernel: P2P(PCI) 0x10 = 00000000
Aug  1 02:00:09 kernel: P2P(PCI) 0x14 = 20100000
Aug  1 02:00:09 kernel: P2P(PCI) 0x18 = 00010100
Aug  1 02:00:09 kernel: P2P(PCI) 0x1c = 000000f0
Aug  1 02:00:09 kernel: P2P(PCI) 0x20 = 20002000
Aug  1 02:00:09 kernel: P2P(PCI) 0x24 = 0000fff0
Aug  1 02:00:09 kernel: P2P(PCI) 0x28 = 00000000
Aug  1 02:00:09 kernel: P2P(PCI) 0x2c = 00000000
Aug  1 02:00:09 kernel: P2P(PCI) 0x30 = 00000000
Aug  1 02:00:09 kernel: P2P(PCI) 0x34 = 00000040
Aug  1 02:00:09 kernel: P2P(PCI) 0x38 = 00000000
Aug  1 02:00:09 kernel: P2P(PCI) 0x3c = 000401ff
Aug  1 02:00:09 kernel: res[0]->start = 0
Aug  1 02:00:09 kernel: res[0]->end = 1ffffff
Aug  1 02:00:09 kernel: res[1]->start = 20100000
Aug  1 02:00:09 kernel: res[1]->end = 2010ffff
Aug  1 02:00:09 kernel: res[2]->start = 0
Aug  1 02:00:09 kernel: res[2]->end = 0
Aug  1 02:00:09 kernel: res[3]->start = 0
Aug  1 02:00:09 kernel: res[3]->end = 0
Aug  1 02:00:09 kernel: res[4]->start = 0
Aug  1 02:00:09 kernel: res[4]->end = 0
Aug  1 02:00:09 kernel: res[5]->start = 0
Aug  1 02:00:09 kernel: res[5]->end = 0
Aug  1 02:00:09 kernel: bus=1, slot = 0x0
Aug  1 02:00:09 kernel: dev III(PCIe)  0x00 = 30911814
Aug  1 02:00:09 kernel: dev III(PCIe)  0x04 = 00100000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x08 = 02800000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x0c = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x10 = 20000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x14 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x18 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x1c = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x20 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x24 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x28 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x2c = 30911814
Aug  1 02:00:09 kernel: dev III(PCIe)  0x30 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x34 = 00000040
Aug  1 02:00:09 kernel: dev III(PCIe)  0x38 = 00000000
Aug  1 02:00:09 kernel: dev III(PCIe)  0x3c = 000001ff
Aug  1 02:00:09 kernel: res[0]->start = 20000000
Aug  1 02:00:09 kernel: res[0]->end = 2000ffff
Aug  1 02:00:09 kernel: res[1]->start = 0
Aug  1 02:00:09 kernel: res[1]->end = 0
Aug  1 02:00:09 kernel: res[2]->start = 0
Aug  1 02:00:09 kernel: res[2]->end = 0
Aug  1 02:00:09 kernel: res[3]->start = 0
Aug  1 02:00:09 kernel: res[3]->end = 0
Aug  1 02:00:09 kernel: res[4]->start = 0
Aug  1 02:00:09 kernel: res[4]->end = 0
Aug  1 02:00:09 kernel: res[5]->start = 0
Aug  1 02:00:09 kernel: res[5]->end = 0
Aug  1 02:00:09 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Aug  1 02:00:09 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Aug  1 02:00:09 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Aug  1 02:00:09 kernel: ralink flash device: 0x1000000 at 0x1c000000
Aug  1 02:00:09 kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Aug  1 02:00:09 kernel: number of CFI chips: 1
Aug  1 02:00:09 kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Aug  1 02:00:09 kernel: partion 3: 50000 fb0000
Aug  1 02:00:09 kernel: partion 4: 141140 ebeec0
Aug  1 02:00:09 kernel: Creating 5 MTD partitions on "Ralink SoC physically mapped flash":
Aug  1 02:00:09 kernel: 0x00000000-0x00030000 : "Bootloader"
Aug  1 02:00:09 kernel: 0x00030000-0x00040000 : "nvram"
Aug  1 02:00:09 kernel: 0x00040000-0x00050000 : "Factory"
Aug  1 02:00:09 kernel: 0x00050000-0x01000000 : "linux"
Aug  1 02:00:09 kernel: mtd: partition "linux" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x7b0000
Aug  1 02:00:09 kernel: 0x00141140-0x01000000 : "rootfs"
Aug  1 02:00:09 kernel: mtd: partition "rootfs" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x6beec0
Aug  1 02:00:09 kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Aug  1 02:00:09 kernel: Load Ralink DFS Timer Module
Aug  1 02:00:09 kernel: RT3xxx EHCI/OHCI init.
Aug  1 02:00:09 kernel: pcie_portdrv_probe->Dev[1814:0802] has invalid IRQ. Check vendor BIOS
Aug  1 02:00:09 kernel: assign_interrupt_mode Found MSI capability
Aug  1 02:00:09 kernel: GPIO MODE: 189f
Aug  1 02:00:09 kernel: Ralink gpio driver initialized
Aug  1 02:00:09 kernel: rtl8367r_init...
Aug  1 02:00:09 kernel: switch IC = CHIP_RTL8367R_VB, SDK = V1.2.6
Aug  1 02:00:10 kernel: rdm_major = 254
Aug  1 02:00:10 kernel: GDMA1_MAC_ADRH -- : 0x00000000
Aug  1 02:00:10 kernel: GDMA1_MAC_ADRL -- : 0x00000000
Aug  1 02:00:10 kernel: Ralink APSoC Ethernet Driver Initilization. v2.0  256 rx/tx descriptors allocated, mtu = 1500!
Aug  1 02:00:10 kernel: GDMA1_MAC_ADRH -- : 0x000010bf
Aug  1 02:00:10 kernel: GDMA1_MAC_ADRL -- : 0x488143cc
Aug  1 02:00:10 kernel: PROC INIT OK!
Aug  1 02:00:10 kernel: u32 classifier
Aug  1 02:00:10 kernel:     OLD policer on 
Aug  1 02:00:10 kernel: Netfilter messages via NETLINK v0.30.
Aug  1 02:00:10 kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
Aug  1 02:00:10 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug  1 02:00:10 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug  1 02:00:10 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Aug  1 02:00:10 kernel: Warning: unable to open an initial console.
Aug  1 02:00:10 kernel: phy_tx_ring = 0x00758000, tx_ring = 0xa0758000
Aug  1 02:00:10 kernel: phy_rx_ring = 0x00707000, rx_ring = 0xa0707000
Aug  1 02:00:10 kernel: CDMA_CSG_CFG = 81000007
Aug  1 02:00:10 kernel: GDMA1_FWD_CFG = C0710000
Aug  1 02:00:10 kernel: wan_stb_x=0
Aug  1 02:00:10 kernel: ethernet_wan_x=0
Aug  1 02:00:10 kernel: LAN: P1,P2,P3,P4 DSLWAN: P0
Aug  1 02:00:10 kernel: set switch ic to SVLAN
Aug  1 02:00:10 kernel: error 0
Aug  1 02:00:10 kernel: error 1
Aug  1 02:00:10 kernel: error 2
Aug  1 02:00:10 kernel: configure_dslwan_vlan(1, 01, 01, 01)
Aug  1 02:00:10 kernel: error set svid 1 port membership
Aug  1 02:00:10 kernel: configure_dslwan_vlan(2, 1e, 1e, 1e)
Aug  1 02:00:10 kernel: error set svid 2 port membership
Aug  1 02:00:10 kernel: configure_dslwan_vlan(3, 00, 00, 00)
Aug  1 02:00:10 kernel: error set svid 3 port membership
Aug  1 02:00:10 kernel: configure_dslwan_vlan(4, 00, 00, 00)
Aug  1 02:00:10 kernel: error set svid 4 port membership
Aug  1 02:00:10 kernel: rt2860v2_ap: module license 'unspecified' taints kernel.
Aug  1 02:00:10 kernel: === pAd = c0074000, size = 851864 ===
Aug  1 02:00:10 kernel: <-- RTMPAllocAdapterBlock, Status=0
Aug  1 02:00:10 kernel: register rt2860
Aug  1 02:00:10 kernel: === pAd = c0171000, size = 725984 ===
Aug  1 02:00:10 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Aug  1 02:00:10 kernel: <-- RTMPAllocAdapterBlock, Status=0
Aug  1 02:00:10 kernel: pAd->CSRBaseAddress =0xc0160000, csr_addr=0xc0160000!
Aug  1 02:00:10 kernel: Algorithmics/MIPS FPU Emulator v1.5
Aug  1 02:00:10 kernel: RX DESC a76ce000  size = 2048
Aug  1 02:00:10 kernel: RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5
Aug  1 02:00:10 kernel: NVM is FLASH mode
Aug  1 02:00:10 kernel: 1. Phy Mode = 9
Aug  1 02:00:10 kernel: 2. Phy Mode = 9
Aug  1 02:00:10 kernel: 3. Phy Mode = 9
Aug  1 02:00:10 kernel: ^[[mAntCfgInit: primary/secondary ant 0/1
Aug  1 02:00:10 kernel: ^[[mRTMPSetPhyMode: channel is out of range, use first channel=0 
Aug  1 02:00:10 kernel: MCS Set = ff ff 00 00 01
Aug  1 02:00:10 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:13 kernel: =====================================================
Aug  1 02:00:13 kernel: Channel 1 : Dirty = 0, False CCA = 215, Busy Time = 5750, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 2 : Dirty = 0, False CCA = 218, Busy Time = 6532, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 3 : Dirty = 0, False CCA = 49, Busy Time = 1370, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 4 : Dirty = 0, False CCA = 444, Busy Time = 13703, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 5 : Dirty = 0, False CCA = 94, Busy Time = 2971, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 6 : Dirty = 0, False CCA = 1, Busy Time = 41, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 7 : Dirty = 0, False CCA = 185, Busy Time = 4109, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 8 : Dirty = 0, False CCA = 118, Busy Time = 3145, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 9 : Dirty = 0, False CCA = 210, Busy Time = 6304, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 10 : Dirty = 0, False CCA = 183, Busy Time = 4735, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 11 : Dirty = 0, False CCA = 230, Busy Time = 7039, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 12 : Dirty = 0, False CCA = 129, Busy Time = 3171, Skip Channel = FALSE
Aug  1 02:00:13 kernel: Channel 13 : Dirty = 0, False CCA = 0, Busy Time = 5185, Skip Channel = FALSE
Aug  1 02:00:13 kernel: =====================================================
Aug  1 02:00:13 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 3 
Aug  1 02:00:13 kernel: Min Dirty = 0
Aug  1 02:00:13 kernel: ExChannel = 7 , 0
Aug  1 02:00:13 kernel: BW        = 40
Aug  1 02:00:13 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:13 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:14 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:14 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:14 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:15 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:15 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:15 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:15 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:16 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:16 kernel: Main bssid = 10:bf:48:81:43:c8
Aug  1 02:00:16 kernel: <==== rt28xx_init, Status=0
Aug  1 02:00:16 kernel: 0x1300 = 00064380
Aug  1 02:00:16 kernel: RX DESC a7462000  size = 2048
Aug  1 02:00:17 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Aug  1 02:00:17 kernel: 1. Phy Mode = 8
Aug  1 02:00:17 kernel: 2. Phy Mode = 8
Aug  1 02:00:17 kernel: 3. Phy Mode = 8
Aug  1 02:00:17 kernel: ^[[mAntCfgInit: primary/secondary ant 0/1
Aug  1 02:00:17 kernel: ^[[mRTMPSetPhyMode: channel is out of range, use first channel=0 
Aug  1 02:00:17 kernel: MCS Set = ff ff ff 00 01
Aug  1 02:00:17 kernel: SYNC - BBP R4 to 20MHz.l
Aug  1 02:00:18 kernel: =====================================================
Aug  1 02:00:18 kernel: Channel 36 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug  1 02:00:18 kernel: Channel 40 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug  1 02:00:18 kernel: Channel 44 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug  1 02:00:18 kernel: Channel 48 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug  1 02:00:18 kernel: =====================================================
Aug  1 02:00:18 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 36 
Aug  1 02:00:18 kernel: Min Dirty = 0
Aug  1 02:00:18 kernel: ExChannel = 0 , 0
Aug  1 02:00:18 kernel: BW        = 40
Aug  1 02:00:18 kernel: Main bssid = 10:bf:48:81:43:cc
Aug  1 02:00:18 kernel: <==== rt28xx_init, Status=0
Aug  1 02:00:18 kernel: 0x1300 = 00064380
Aug  1 02:00:18 stop_nat_rules: apply the redirect_rules!
Aug  1 02:00:18 WAN Connection: Ethernet link down.
Aug  1 02:00:18 DSL-N55U: start httpd
Aug  1 02:00:19 kernel: set watchdog pid as: 251
Aug  1 02:00:19 kernel: set watchdog pid as: 251
Aug  1 02:00:19 disk monitor: be idle
Aug  1 02:00:19 hour monitor: daemon is starting
Aug  1 02:00:19 hour monitor: daemon terminates
Aug  1 02:00:19 miniupnpd[275]: version 1.9 started
Aug  1 02:00:19 miniupnpd[275]: HTTP listening on port 56401
Aug  1 02:00:19 miniupnpd[275]: Listening for NAT-PMP/PCP traffic on port 5351
Aug  1 02:00:20 kernel: eth2.1.1: Setting MAC address to  10 bf 48 81 43 c8.
Aug  1 02:00:20 kernel: VLAN (eth2.1.1):  Setting underlying device (eth2.1) to promiscious mode.
Aug  1 02:00:20 pppd[290]: pppd 2.4.7 started by admin, uid 0
Aug  1 02:00:20 kernel: SCSI subsystem initialized
Aug  1 02:00:21 kernel: ufsd: driver 8.5 (NTFS4LINUX_U85_022_S[2011-11-29-13:37:54]) LBD=ON with ioctl loaded at c04e3000
Aug  1 02:00:21 kernel: NTFS support included
Aug  1 02:00:21 kernel: Built_for__asus_n56u_2011-11-22
Aug  1 02:00:30 rc_service: zcip 373:notify_rc start_firewall
Aug  1 02:00:30 zcip client: configured 169.254.223.117
Aug  1 02:00:31 kernel: nf_conntrack_rtsp v0.6.21 loading
Aug  1 02:00:31 kernel: nf_nat_rtsp v0.6.21 loading
Aug  1 02:00:55 pppd[290]: Timeout waiting for PADO packets

come si setta l'orario al router correttamente poi??

Premessa non è il router principale, lo vorrei usare come access point per il soggiorno.

[razziadacqua]

Salve a tutti!

Ho collegato il modem ASUS in cascata con l'HUB TIM FIBRA. Pare che da solo sia andato da solo in Bridge e distribuisca rete via WIFi e ethernet.

Il problema è che non riesco in alcun modo a capire quale indirizzo IP acquisisca il modem e nemmeno se mi collego direttamente al suo WiFi, riesco ad interrogare il DOWNLOAD MASTER. Io vorrei tenerlo acceso in cascata solo per il client Torrent e relativo disco fisso collegato.

Qualcuno può darmi un aiutino? Devo prima scollegare, ricollegarlo da solo e configurare a mano gli indirizzi?

Ho provato a scansionare la rete con power shell e mobaxterm ma non c'è verso di trovare questo IP.

Il bello è che se mi collego via cell al suo wifi, il cellulare compare in rete sotto ethernet con un suo IP...

[Djambe]

Originariamente inviato da razziadacqua

Il bello è che se mi collego via cell al suo wifi, il cellulare compare in rete sotto ethernet con un suo IP...

Se ti colleghi al wifi dell'asus con il cell, il default gateway della connessione è l'IP dell'asus

[Giorgio87]

Buongiorno ragazzi
Ho un problema con il mio Router Asus dsl N55U

Una volta che accedo al pannello, non mi carica praticamente nulla della grafica
Icone ecc ecc
mi dice file not found su alcuni sezioni e nulla

La connessione internet funziona
Ho provato a ravviare ma nulla

Che faccio?

[Giorgio87]

[Trotto@81]

Prova con un reset, ma potrebbe non ripartire più.

[Djambe]

Originariamente inviato da Giorgio87

Prova a cancellare la cache oppure ad utilizzare una finestra in incognito

[Giorgio87]

Originariamente inviato da Djambe

Prova a cancellare la cache oppure ad utilizzare una finestra in incognito

niente da fare

[\_Davide_/]

Originariamente inviato da Trotto@81

Prova con un reset, ma potrebbe non ripartire più.

Quoto!

[czame]

Originariamente inviato da Giorgio87

Buongiorno ragazzi
Ho un problema con il mio Router Asus dsl N55U

Una volta che accedo al pannello, non mi carica praticamente nulla della grafica
Icone ecc ecc
mi dice file not found su alcuni sezioni e nulla

La connessione internet funziona
Ho provato a ravviare ma nulla

Che faccio?

Prova ad usare un altro browser per accedere al router (esempio Chrome, Firefox, Opera, etc.); se non funzionerà, possibilmente, prova ad usare un altro PC...

[Trotto@81]

Originariamente inviato da czame

Prova ad usare un altro browser per accedere al router (esempio Chrome, Firefox, Opera, etc.); se non funzionerà, possibilmente, prova ad usare un altro PC...

Oppure a spostarlo su un'altra utenza?

[Giorgio87]

Nulla da fare, non cambia nulla 😪

[andbad]

Originariamente inviato da Giorgio87

Nulla da fare, non cambia nulla 😪

C'è la procedura di recovery. Prova quella se non l'hai già fatto.

By(t)e

[czame]

Originariamente inviato da Giorgio87

Nulla da fare, non cambia nulla ��

...allora prova col reset... Il mio si è guastato solo qualche settimana fa... Vanno a tempo...
È durato da maggio 2014 a ottobre 2019.