WD TV HD Media Player

[NZ]

scusate ma non mi è chiara una cosa:

il WD legge anche i filmati mp4?
supporta i sottotitoli in formato ASS?

grazie mille

[cionci]

Postaci degli esempi e noi te li proviamo.

[Robby Naish]

Non so se qualcuno lo ha evidenziato, ma c'è un nuovo FW MOd su base .10

WDLXTV 0.5.5 Available
B-rad has released his latest custom firmware for the first time in a few weeks. The new version conatains:

* based on firmware 1.02.10
* fixed (finally) optical drive functionality
* USB Hub support for more than one device per slot
* LaurentG's mount.watch to allow disabling of Media Library
* LaurentG's additional thumb browse views
* LaurentG's other assorted patches
* changed selector of thumb views (look at S00custom-options for examples)
* 32 (real) loopback devices now (thx disco)
* techflaws corrected deutsch translation
* NFS & pure-ftp server removed due to size constraints



Poi ci sono le prime immagini del WDTV2

"There’s no information about the new version except for the noticeable network port, video inputs for the standard def, and the DTS downmix."





Ciao

Ale

[cionci]

E' da un bel po' che è uscito quel firmware, se non sbaglio.

[Robby Naish]

Originariamente inviato da cionci

E' da un bel po' che è uscito quel firmware, se non sbaglio.

Non so onestamente, ma al max 1 mese, in quanto è su base .10, quindi l'ultimo FW WD....

ciao

Ale

[LIV60]

ciao ginluca f.

scusatemi se insisto nel chiedere aiuto ma ci sto andando di matto ho meglio inserisco le copertine nelle varie cartelle rinominandole con il nome del film ma su alcune le legge e altre no come avete risolto

ciao e grazie a tutti

così

http://www.wdtvc.com/thumbnail-creator/

mi potresti dire come le devo poi inserire nel wdtv una piccola guida grazie

[3DMark79]

Originariamente inviato da Robby Naish

Poi ci sono le prime immagini del WDTV2

"There’s no information about the new version except for the noticeable network port, video inputs for the standard def, and the DTS downmix."





Ciao

Ale

Dovrebbe avere solo la scheda di rete e qualche miglioramento al DTS o potenzieranno anche il chip?

[cionci]

LIV60: te l'ho già spigato. Per poter vedere le immagini nelle miniature delle cartelle devi inserire l'immagine dentro la cartella con il nome folder.jpg. Se vuoi vedere l'immagine nella miniatura di ogni singolo file devi darle lo stesso nome del file, ma con estensione .jpg e poi la copi nella stessa cartella del file.

Esempio: nella cartella A hai due file chiamati B.avi e C.mov.
Se vuoi vedere la miniatura della cartella e di entrambi i file devi mettere tre immagini dentro la cartella A:

folder.jpg
B.jpg
C.jpg

[oasis90]

Originariamente inviato da 3DMark79

Dovrebbe avere solo la scheda di rete e qualche miglioramento al DTS o potenzieranno anche il chip?

speriamo non ci siano grossi miglioramenti visto che l'ho appena preso

[gianluca.f]

Originariamente inviato da cionci

LIV60: te l'ho già spigato. Per poter vedere le immagini nelle miniature delle cartelle devi inserire l'immagine dentro la cartella con il nome folder.jpg. Se vuoi vedere l'immagine nella miniatura di ogni singolo file devi darle lo stesso nome del file, ma con estensione .jpg e poi la copi nella stessa cartella del file.

Esempio: nella cartella A hai due file chiamati B.avi e C.mov.
Se vuoi vedere la miniatura della cartella e di entrambi i file devi mettere tre immagini dentro la cartella A:

folder.jpg
B.jpg
C.jpg

Originariamente inviato da LIV60

ciao ginluca f.
mi potresti dire come le devo poi inserire nel wdtv una piccola guida grazie

con l'ultimo firmware comunque il primo jpeg della cartella viene usato per
l'anteprima della cartella. Per l'anteprima del file invece rimane che il nome jpeg dev'essere lo stesso del video (estensione esclusa)

comunque il link serve solo per ridimensionare il file immagine ad un icona che sia rapida da leggere per il wd.
esempio mettiamo che tu voglia cercare la copertina del film alien

scrivi alien lui te ne troverà alcune, clicchi sull'icona che preferisci e ti creerà la thumbnail (miniatura)
quella con tasto destro la salvi nella cartella che vuoi.

[Parny]

Originariamente inviato da Robby Naish

Poi ci sono le prime immagini del WDTV2

"There’s no information about the new version except for the noticeable network port, video inputs for the standard def, and the DTS downmix."





Ciao

Ale

Questo sembra interessante.

Se riescono ad aumentare la velocità del trasferimento dei file via rete potrei farci un pensierino.

[gianluca.f]

la lingua predefinita nei dvd si può settare? mi parte sempre l'inglese.

un piccolo ot, voi che programma usate per creare gli avi o gli mkv? ho provato simpleDivx e sembra funzionare bene.
flaskmpeg che usavo ai bei tempi mi va in crash ma conto di sistemarlo il prima possibile.

[aragorn23]

qualcuno sa quanto consuma l'aggeggetto?

vorrei collegarlo alle prese di potenza sul retro dell'ampli così che quando spengo l'audio, spengo anche lui ed evita di continuare a riscaldarsi come una caldaia
le 2 prese reggono in totale 100W e una è già occupata dal sub coi suoi 70W. secondo voi il wd hd tv col suo trasformatorino consuma più di 30W?

[matteo1]

mi pare che qualcuno abbia ipotizzato una 20ina di watt

[smartgatto]

ciao a tutti, ho provato ad installare una d-link dwa140 sul mio wdtv ma non ci riesco...mi potete aiutare?

eccovi il dmesg.txt:

Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #11 PREEMPT Wed Dec 24 17:28:32 CST 2008
Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Valid MEMCFG found at 0x10000fc0.
CPU revision is: 00019069
Determined physical RAM map:
memory: 06fe0000 @ 10020000 (usable)
On node 0 totalpages: 94208
DMA zone: 94208 pages, LIFO batch:31
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: console=ttyS0
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 2048 (order: 11, 32768 bytes)
Using 148.500 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
PCI: Initializing SMP863x/SMP865x PCI host controller
PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
PCI: Region size is 16384KB
PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Created /proc/cpucache_info entry.
NTFS driver 2.1.25 [Flags: R/O].
fuse init (API version 7.3)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
SMP86xx led_rst (253:0): driver loaded.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
loop: loaded (max 8 devices)
physmap flash device CS2: 1000000 at 48000000
CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Using physmap partition definition
Adding partition #1-#5
Creating 5 MTD partitions on "CS2: Physically mapped flash":
0x00000000-0x00060000 : "CS2-Part1"
0x00060000-0x00280000 : "CS2-Part2"
0x00280000-0x00fc0000 : "CS2-Part3"
0x00fc0000-0x00fe0000 : "CS2-Part4"
0x00fe0000-0x01000000 : "CS2-Part5"
physmap flash device CS3: 4000000 at 4c000000
CFI: Found no CS3: Physically mapped flash device at location zero
driver tangox-ehci-hcd, 10 Dec 2004
TangoX USB initializing...
tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
TangoX USB was initialized.
Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using tangox-ehci-hcd and address 2
Initializing USB Mass Storage driver...
usb 1-2: new high speed USB device using tangox-ehci-hcd and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 252k freed
Vendor: Model: USB FLASH DRIVE Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15663104 512-byte hdwr sectors (8020 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15663104 512-byte hdwr sectors (8020 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
cdrom: no version for "struct_module" found: kernel tainted.
cdrom: No versions for exported symbols. Tainting kernel.
llad: module license 'LGPL' taints kernel.
em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
em8xxx0 [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
mumk_register_tasklet: (0) tasklet c403f000 status @c938aa24
em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
loop: No versions for exported symbols. Tainting kernel.
loop: loaded (max 255 devices)
attempt to access beyond end of device
loop0: rw=0, want=68, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
attempt to access beyond end of device
loop0: rw=0, want=12, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
attempt to access beyond end of device
loop0: rw=0, want=12, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1252, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
UDF-fs: No partition found (1)
attempt to access beyond end of device
loop1: rw=0, want=10244, limit=10240
attempt to access beyond end of device
loop1: rw=0, want=10244, limit=10240
UDF-fs: No partition found (1)
EXT3 FS on loop1, internal journal
EXT3-fs: recovery complete.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
wireless_ext: No versions for exported symbols. Tainting kernel.
Loading wireless extentions module...
ir: Enable NEC decoder (0x00000000)
ir: Enable RC5 decoder (0x00000000)


e il messages.txt:

Dec 31 16:00:39 WDTV-0d2c7 syslog.info syslogd started: BusyBox v1.10.0
Dec 31 16:00:39 WDTV-0d2c7 user.notice kernel: klogd started: BusyBox v1.10.0 (2009-02-15 05:09:42 CST)
Dec 31 16:00:39 WDTV-0d2c7 user.notice kernel: Linux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #11 PREEMPT Wed Dec 24 17:28:32 CST 2008
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
Dec 31 16:00:39 WDTV-0d2c7 user.info kernel: SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
Dec 31 16:00:39 WDTV-0d2c7 user.info kernel: BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Valid MEMCFG found at 0x10000fc0.
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: CPU revision is: 00019069
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Determined physical RAM map:
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: memory: 06fe0000 @ 10020000 (usable)
Dec 31 16:00:39 WDTV-0d2c7 user.debug kernel: On node 0 totalpages: 94208
Dec 31 16:00:39 WDTV-0d2c7 user.debug kernel: DMA zone: 94208 pages, LIFO batch:31
Dec 31 16:00:39 WDTV-0d2c7 user.debug kernel: DMA32 zone: 0 pages, LIFO batch:0
Dec 31 16:00:39 WDTV-0d2c7 user.debug kernel: Normal zone: 0 pages, LIFO batch:0
Dec 31 16:00:39 WDTV-0d2c7 user.debug kernel: HighMem zone: 0 pages, LIFO batch:0
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Built 1 zonelists
Dec 31 16:00:39 WDTV-0d2c7 user.notice kernel: Kernel command line: console=ttyS0
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Synthesized TLB refill handler (20 instructions).
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Synthesized TLB load handler fastpath (32 instructions).
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Synthesized TLB store handler fastpath (32 instructions).
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Synthesized TLB modify handler fastpath (31 instructions).
Dec 31 16:00:39 WDTV-0d2c7 user.notice root: 1.02.10.WDLXTV-0.5.5
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Using 148.500 MHz high precision timer.
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Console: colour dummy device 80x25
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 16:00:39 WDTV-0d2c7 user.info kernel: Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Dec 31 16:00:39 WDTV-0d2c7 user.debug kernel: Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Mount-cache hash table entries: 512
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: Checking for 'wait' instruction... available.
Dec 31 16:00:39 WDTV-0d2c7 user.info kernel: NET: Registered protocol family 16
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PCI: Initializing SMP863x/SMP865x PCI host controller
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PCI: Region size is 16384KB
Dec 31 16:00:39 WDTV-0d2c7 user.warn kernel: PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
Dec 31 16:00:39 WDTV-0d2c7 user.notice root: Displaying detected USB devices...
Dec 31 16:00:39 WDTV-0d2c7 user.notice root: [1005:b113] 1-1( 2.00,480m) USB FLASH DRIVE /198B0B1429E4
Dec 31 16:00:40 WDTV-0d2c7 user.notice root: [07d1:3c09] 1-2( 2.00,480m) 802.11 n WLAN/1.0
Dec 31 16:00:40 WDTV-0d2c7 user.notice root: [0000:0000] usb1( 2.00,480m) TangoX USB 2.0/tangox-ehci-hcd
Dec 31 16:00:40 WDTV-0d2c7 user.notice root: [0000:0000] usb2( 1.10,12m) USB Host Controller/TANGOX OHCI
Dec 31 16:00:39 WDTV-0d2c7 user.notice kernel: SCSI subsystem initialized
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: usbcore: registered new driver usbfs
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: usbcore: registered new driver hub
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: Created /proc/cpucache_info entry.
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: NTFS driver 2.1.25 [Flags: R/O].
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: fuse init (API version 7.3)
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: Initializing Cryptographic API
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: io scheduler noop registered
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: io scheduler anticipatory registered
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: io scheduler deadline registered
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: io scheduler cfq registered
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: SMP86xx led_rst (253:0): driver loaded.
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: loop: loaded (max 8 devices)
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: physmap flash device CS2: 1000000 at 48000000
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: number of CFI chips: 1
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: Using physmap partition definition
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: Adding partition #1-#5
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: Creating 5 MTD partitions on "CS2: Physically mapped flash":
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: 0x00000000-0x00060000 : "CS2-Part1"
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: 0x00060000-0x00280000 : "CS2-Part2"
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: 0x00280000-0x00fc0000 : "CS2-Part3"
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: 0x00fc0000-0x00fe0000 : "CS2-Part4"
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: 0x00fe0000-0x01000000 : "CS2-Part5"
Dec 31 16:00:40 WDTV-0d2c7 user.notice kernel: physmap flash device CS3: 4000000 at 4c000000
Dec 31 16:00:40 WDTV-0d2c7 user.debug kernel: CFI: Found no CS3: Physically mapped flash device at location zero
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: driver tangox-ehci-hcd, 10 Dec 2004
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: TangoX USB initializing...
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: hub 1-0:1.0: USB hub found
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: hub 1-0:1.0: 2 ports detected
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: TangoX USB was initialized.
Dec 31 16:00:40 WDTV-0d2c7 user.warn kernel: Initializing Tango
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: X USB OHCI Controller Membase=0xa0021500, irq=47
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: hub 2-0:1.0: USB hub found
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: hub 2-0:1.0: 2 ports detected
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 2
Dec 31 16:00:40 WDTV-0d2c7 user.info kernel: Initializing USB Mass Storage driver...
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: usb 1-2: new high speed USB device using tangox-ehci-hcd and address 3
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Dec 31 16:00:41 WDTV-0d2c7 user.debug kernel: usb-storage: device found at 2
Dec 31 16:00:41 WDTV-0d2c7 user.debug kernel: usb-storage: waiting for device to settle before scanning
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: usbcore: registered new driver usb-storage
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: USB Mass Storage support registered.
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: NET: Registered protocol family 2
Dec 31 16:00:41 WDTV-0d2c7 user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 16:00:41 WDTV-0d2c7 user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Dec 31 16:00:41 WDTV-0d2c7 user.warn kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: TCP reno registered
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: TCP bic registered
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: NET: Registered protocol family 1
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: NET: Registered protocol family 17
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: Freeing unused kernel memory: 252k freed
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: Vendor: Model: USB FLASH DRIVE Rev: PMAP
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: Type: Direct-Access ANSI SCSI revision: 00
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: SCSI device sda: 15663104 512-byte hdwr sectors (8020 MB)
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: sda: Write Protect is off
Dec 31 16:00:41 WDTV-0d2c7 user.debug kernel: sda: Mode Sense: 23 00 00 00
Dec 31 16:00:41 WDTV-0d2c7 user.err kernel: sda: assuming drive cache: write through
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: SCSI device sda: 15663104 512-byte hdwr sectors (8020 MB)
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: sda: Write Protect is off
Dec 31 16:00:41 WDTV-0d2c7 user.debug kernel: sda: Mode Sense: 23 00 00 00
Dec 31 16:00:41 WDTV-0d2c7 user.err kernel: sda: assuming drive cache: write through
Dec 31 16:00:41 WDTV-0d2c7 user.info kernel: sda: sda1
Dec 31 16:00:41 WDTV-0d2c7 user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Dec 31 16:00:42 WDTV-0d2c7 user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 31 16:00:42 WDTV-0d2c7 user.debug kernel: usb-storage: device scan complete
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: cdrom: no version for "struct_module" found: kernel tainted.
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: cdrom: No versions for exported symbols. Tainting kernel.
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: llad: module license 'LGPL' taints kernel.
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: em8xxx0 [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: mumk_register_tasklet: (0) tasklet c403f000 status @c938aa24
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
Dec 31 16:00:42 WDTV-0d2c7 user.warn kernel: loop: No versions for exported symbols. Tainting kernel.
Dec 31 16:00:45 WDTV-0d2c7 user.info kernel: loop: loaded (max 255 devices)
Dec 31 16:00:47 WDTV-0d2c7 user.notice root: crazymounter: mounting devices
Dec 31 16:00:48 WDTV-0d2c7 user.notice root: /dev/mtdblock2: LABEL="PRIMARY_SYSTEM" TYPE="romfs"
Dec 31 16:00:48 WDTV-0d2c7 user.notice root: /dev/mtdblock3: LABEL="Compressed" TYPE="cramfs"
Dec 31 16:00:48 WDTV-0d2c7 user.notice root: /dev/sda1: LABEL="MARCOGIGLIO" UUID="C475-CDD4" TYPE="vfat"
Dec 31 16:00:49 WDTV-0d2c7 user.notice root: crazymount: mounting app binaries...
Dec 31 16:00:49 WDTV-0d2c7 user.notice root: DEVICE /dev/sda1 CONNECTED
Dec 31 16:00:49 WDTV-0d2c7 user.notice root: log-saver app found
Dec 31 16:00:49 WDTV-0d2c7 user.notice root: Mounting /tmp/mnt/sda1/log-saver.app.bin at /apps/log-saver
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=68, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=1028, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=12, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=1028, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=12, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=1252, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop0: rw=0, want=1028, limit=8
Dec 31 16:00:50 WDTV-0d2c7 user.warn kernel: UDF-fs: No partition found (1)
Dec 31 16:00:50 WDTV-0d2c7 user.notice root: wireless-mod-rt app found
Dec 31 16:00:50 WDTV-0d2c7 user.notice root: Mounting /tmp/mnt/sda1/wireless-mod-rt.app.bin at /apps/wireless-mod-rt
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop1: rw=0, want=10244, limit=10240
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: attempt to access beyond end of device
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: loop1: rw=0, want=10244, limit=10240
Dec 31 16:00:50 WDTV-0d2c7 user.warn kernel: UDF-fs: No partition found (1)
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: EXT3 FS on loop1,
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: internal journal
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: EXT3-fs: recovery complete.
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: kjournald starting. Commit interval 5 seconds
Dec 31 16:00:50 WDTV-0d2c7 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 31 16:00:51 WDTV-0d2c7 user.notice root: adjusting LIBPATH
Dec 31 16:00:51 WDTV-0d2c7 user.notice root: adjusting PATH
Dec 31 16:00:51 WDTV-0d2c7 user.notice root: Path set to /apps/wireless-mod-rt/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Dec 31 16:00:57 WDTV-0d2c7 user.notice root: wireless-mod-rt: Starting..
Dec 31 16:00:57 WDTV-0d2c7 user.notice root: wireless-mod-rt: Creating read+write /etc under /tmp/.root
Dec 31 16:00:57 WDTV-0d2c7 user.notice root: wireless-mod-rt: Installing new device configs to /etc/mdev.conf
Dec 31 16:00:57 WDTV-0d2c7 user.warn kernel: wireless_ext: No versions for exported symbols. Tainting kernel.
Dec 31 16:00:57 WDTV-0d2c7 user.info kernel: Loading wireless extentions module...
Dec 31 16:00:58 WDTV-0d2c7 daemon.info utelnetd[1039]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Dec 31 16:01:00 WDTV-0d2c7 user.notice root: Switching to default 120x180 thumb view
Dec 31 16:01:01 WDTV-0d2c7 user.debug kernel: ir: Enable NEC decoder (0x00000000)
Dec 31 16:01:01 WDTV-0d2c7 user.debug kernel: ir: Enable RC5 decoder (0x00000000)

[LIV60]

per cionci & gianluca f :

grazie siete sta chiarissimi ottima spiegazione

[cionci]

Originariamente inviato da smartgatto

ciao a tutti, ho provato ad installare una d-link dwa140 sul mio wdtv ma non ci riesco...mi potete aiutare?

Hai controllato che sia compatibile ?
Sicuramente non è fra quelli compatibili con wireless-mod.app.bin.

[smartgatto]

si, è compatibile! l'ho presa apposta!

[amonRAIII]

Originariamente inviato da cionci

Hai controllato che sia compatibile ?
Sicuramente non è fra quelli compatibili con wireless-mod.app.bin.

guarda ti smentisco prima di subito perchè ho anche io quella chiavetta usb lì e mi funge alla grande con wireless-mod-0.3-sebmod montata sul firmware B-Rad's WDLXTV

per altro ho semplicemente seguito alla lettera le istruzioni di questo link, la sezione a fondo pagina
http://wiki.wdtv.org/doku.php?id=usb...9b5301b63a62f9

[cionci]

Originariamente inviato da amonRAIII

con wireless-mod-0.3-sebmod

Appunto, avevo detto wireless-mod.app.bin che non supporta il chipset rt2870