Nuova versione del Codec Divx (5.03)

raptor · 25-01-2003, 08:18

Disponibile sul sito ufficiale http://www.divx.com la nuova versione del noto codec di compressione.

Queste le novita' e i bug risolti:

New:

Support for interlaced video in the decoder. Preserving the interlaced fields of interlaced video may sometimes result in better video quality during playback.
New de-ringing post-processing algorithm. The new algorithm improves the perceived video quality during playback. It is activated when the post-processing level is set to Level 6.
Video Buffer Verifier (VBV) model (one and two pass encoding). The VBV ensures that the maximum peak bit rate never exceeds either the user's inputted "maximum peak" bit rate value or/and ensures that the encoded stream never violates the buffer of an MPEG-4 compliant decoder. This helps to prevent decoding failure in both hardware and software where memory may be limited yet compliant to the MPEG-4 standard as defined in ISO/IEC 14496-2:2001(E). In order for DivX video to be successfully delivered over a restricted channel in real time to a decoder, the encoder's rate control must ensure that the decoder's buffer is not violated. When this is done properly, then overflow and underflow will never occur and the encoder is said to be "VBV compliant." It makes no difference whether the video is encoded in 1-pass or many, in real-time or offline. It is the encoder's rate control that must ensure compliance. There are three main requirements of a VBV-compliant rate control algorithm, in order of importance:
VBV compliance. When VBV parameters are specified (size, initial occupancy, channel characteristics) the rate control should avoid producing video that is in danger of violating the decoder's buffer. Bitstream stuffing may be used in extreme cases to prevent overflow in true CBR systems. Underflow must be prevented by increasing frame quantiser or by dropping frames.
Target bitrate. We aim to meet the user's requirements as accurately as possible here. This is directly related to filesize.
Good-looking video. Rate control should aim to produce the subjectively best quality video given other constraints. Consistency is important here as changes in quality are very noticeable and video is often judged by the worse quality segment in the whole sequence.
Nth Pass™ encoding. Another new addition to the rate control arsenal, Nth Pass™ encoding takes advantage of information available from previous analysis (or analyses) of the video sequence. Nth Pass encoding uses information garnered from previous passes through the video sequence, which can improve quality with each pass. There are four main steps to Nth Pass encoding:
Analysis (the first pass)
Map generation (where the results of analyses are processed)
Strategy generation (strategist examines map of the video sequence and creates a strategy that will best achieve the three VBV RC requirements)
In-loop nth pass rate control (uses information from the map and strategy to effect rate control that best fulfills the three requirements)
Support for DivX Certified Profiles. With the new DivX Certification program, DivXNetworks is enabling third parties to create "DivX Certified" products that are rigorously tested and fully compatible with the entire suite of DivX® video technologies. There are four levels of official DivX Certified video products: Handheld Video Devices, Portable Video Devices, Home Theater Video Devices and High Definition Video Devices. These levels quickly and clearly communicate what type and size of DivX video are supported on the certified device. Now, when you encode video, you have the option to force your video to comply with one of the DivX Certified Profiles to ensure that your video will play back properly on certified products.
DivX Decoder verification logo. There is a new semi-transparent DivX Logo that will appear by default for a few seconds any time you use the DivX decoder to watch a DivX video. This instantly lets you know you're watching a true DivX® video. You can turn the display of the logo on or off in the codec properties dialog.
New internal application programming interface (API). The internal API of the codec was changed to better accommodate integration with third party partners. This only affects you if you are a DivX licensee and are working directly with the DivX object code. The external API (e.g., DirectShow, etc.) remains unchanged.
Improved:

The motion estimation algorithm is better optimized for High Definition resolutions (up to 1080p, or 1920 x 1080 pixel resolution
The pre-processing performance is now improved with with the IYUY 4:2:0 color space
Changed:

Removed MP4creator and the MPEG-4 file output option due to some compliance issues. This will return in our next release once these issues are resolved.
Removed the Intelligent IVTC functionality due to persistent problems caused by lack of variable frame rate file format support. This technology will be back soon in a new form...
Changed the block skipping threshold for high quantizers, which improves visual quality when high quantizers are used.
Fixed:

Fixed a bunch of little cosmetic bugs in the DirectShow decoder properties page.
Fixed a bug where the last P frame before an I frame was not displayed when Smooth Playback was selected.
Fixed a practically unnoticeable YUV->RGB16 color conversion rounding bug.
Fixed a bug that was the cause of some of VirtualDub's "Cannot Start Video Compression" errors.
Fixed a few issues with DivX 3.11 compatibility.
Modified the decoder to deal with a bug in the old OpenDivX encoder that set the scalability bit incorrectly in certain cases. The DivX decoder can now detect this problem and play the content properly.
Fixed a problem where some rounding operations were not done toward zero, as is required by section 7.4 of the spec. This fixed an intra case in MPEG-2 inverse quantization.
Fixed a bug where some frames would be corrupted by an out-of-range error.
Fixed several rounding issues related to MMX/SSE/SSE2 optimizations.
Fixed an MMX bug in RGB32 color conversion.

diablo69 · 25-01-2003, 08:25

Una traduzione in italiano non è possibile??

Paky · 25-01-2003, 15:32

Speriamo che il supporto video interlacciato funzioni bene , sarebbe una grossa svolta per il DivX

Paky · 25-01-2003, 16:09

Pais il 503 è prodotto dalla stessa casa , l'ultimo upgrada il precedente .

E se vuoi un consiglio lascia stare il Nimo , cosa te ne fai di tutti quei codec quando poi non li usi

Paky · 25-01-2003, 16:27

Il sito del Nimo è http://nimo.everwicked.com/ ma non va .

Il divx 503 lo puoi istallare senza levare il precedente , si sovrascrive

Cmq per vedere i film non serve istallare tutti i codec ma solo i decoder , poi vedi te

pdepon · 25-01-2003, 16:34

X raptor: grazie dell'informazione.
Ciao

Paky · 25-01-2003, 20:58

Il decoder 5.03 solo per visionare lo trovi -> QUI

Se hai gia il 502 messo basta che lo szippi in C:\windows\system (se hai win 98/me)
Se hai 2k o Xp lo devi szippare in C:\windows\system32

Se non hai gia il divx502 dopo aver szippato devi fare START-> ESEGUI e scrivere:

regsvr32 /c Divxdec.ax

diablo69 · 25-01-2003, 22:17

Codec 5.03 pro con adware,ma sto adware è uno spyware??

Ma come per la versione precedente si puo' disattivare??

Ma questo nuovo codec funziona meglio del 5.02 come qualità??

jumperless · 25-01-2003, 22:20

interessato...

Paky · 25-01-2003, 22:20

Dai il tempo di provarlo

Adaware=Spyware

Se ,aheamh, hai la 502 full basta che scarichi l'upgrade e così non hai problemi di spy

diablo69 · 25-01-2003, 22:30

Io ho la 5.02 pro scaricato da www.divax .it e poi con un trucchetto ho disattivato i vari spyware,gator ecc..
se la installo su tale versione non si installa l'adware??

Paky · 25-01-2003, 22:35

si lo istalla , io parlo della full pro Bundle

Non so se il trucchetto per eliminare lo spy funge con la nuova ....
ma perchè dannarsi con lo spy?

capisce a me

fabianfolle · 25-01-2003, 23:41

mi date un link da dove prendere la versione full senza spyware

Paky · 25-01-2003, 23:52

sul sito divx.com

jumperless · 26-01-2003, 08:16

beh ho provato come dire il trucchetto della 5.02 e funzia...
CiaozZ

GhePeU · 26-01-2003, 11:08

Quote:

Originally posted by "jumperless"

beh ho provato come dire il trucchetto della 5.02 e funzia...
CiaozZ

provato anch'io... confermo

cnc76 · 26-01-2003, 11:39

Io ho la 5.02 PRO.... "registrata" ....ma ho visto che ora non è più possibile scaricare la 5.03PRO (quella a pagamento) senza pagare immediatamente....
prima invece pagavi quando ti dava il codice

Vabbè...

Cmq, per le migliorie (se ci sono veramente) dovrebbero stare nell'attivazione dell'opzione INTERLACED direttamente nel codec??????

Lo chiedo perchè non ho capito molto bene le spiegazioni in inglese.

Grazie.

Se qualcuno ha fatto già delle prove potrebbe postare i suoi risultati.
Grazie.

bye by CNC

Paky · 26-01-2003, 11:47

Ti sbagli , ecco il link per scaricare l'upgrade per la 502 gia registrata -> QUI

Per il supporto del formato interlacciato ho provato ma non funziona bene

Paky · 26-01-2003, 11:59

quel pacchetto l'ho fatto io , serve SOLO a riprodurre e non a codificare .

Riproduce Divx 3/5
Xvid
Audio Wma/mp3/ogg/ac3

Paky · 26-01-2003, 12:03

@Pais

Semplice , in riproduzione il video denota le seghettature tipiche del video interlacciato.

Dobbiamo ancora aspettare per avere Divx con supporto decodifica interlacciata

25-01-2003, 08:18	#1
raptor Senior Member Iscritto dal: Jan 2000 Messaggi: 796	Nuova versione del Codec Divx (5.03) Disponibile sul sito ufficiale http://www.divx.com la nuova versione del noto codec di compressione. Queste le novita' e i bug risolti: New: Support for interlaced video in the decoder. Preserving the interlaced fields of interlaced video may sometimes result in better video quality during playback. New de-ringing post-processing algorithm. The new algorithm improves the perceived video quality during playback. It is activated when the post-processing level is set to Level 6. Video Buffer Verifier (VBV) model (one and two pass encoding). The VBV ensures that the maximum peak bit rate never exceeds either the user's inputted "maximum peak" bit rate value or/and ensures that the encoded stream never violates the buffer of an MPEG-4 compliant decoder. This helps to prevent decoding failure in both hardware and software where memory may be limited yet compliant to the MPEG-4 standard as defined in ISO/IEC 14496-2:2001(E). In order for DivX video to be successfully delivered over a restricted channel in real time to a decoder, the encoder's rate control must ensure that the decoder's buffer is not violated. When this is done properly, then overflow and underflow will never occur and the encoder is said to be "VBV compliant." It makes no difference whether the video is encoded in 1-pass or many, in real-time or offline. It is the encoder's rate control that must ensure compliance. There are three main requirements of a VBV-compliant rate control algorithm, in order of importance: VBV compliance. When VBV parameters are specified (size, initial occupancy, channel characteristics) the rate control should avoid producing video that is in danger of violating the decoder's buffer. Bitstream stuffing may be used in extreme cases to prevent overflow in true CBR systems. Underflow must be prevented by increasing frame quantiser or by dropping frames. Target bitrate. We aim to meet the user's requirements as accurately as possible here. This is directly related to filesize. Good-looking video. Rate control should aim to produce the subjectively best quality video given other constraints. Consistency is important here as changes in quality are very noticeable and video is often judged by the worse quality segment in the whole sequence. Nth Pass™ encoding. Another new addition to the rate control arsenal, Nth Pass™ encoding takes advantage of information available from previous analysis (or analyses) of the video sequence. Nth Pass encoding uses information garnered from previous passes through the video sequence, which can improve quality with each pass. There are four main steps to Nth Pass encoding: Analysis (the first pass) Map generation (where the results of analyses are processed) Strategy generation (strategist examines map of the video sequence and creates a strategy that will best achieve the three VBV RC requirements) In-loop nth pass rate control (uses information from the map and strategy to effect rate control that best fulfills the three requirements) Support for DivX Certified Profiles. With the new DivX Certification program, DivXNetworks is enabling third parties to create "DivX Certified" products that are rigorously tested and fully compatible with the entire suite of DivX® video technologies. There are four levels of official DivX Certified video products: Handheld Video Devices, Portable Video Devices, Home Theater Video Devices and High Definition Video Devices. These levels quickly and clearly communicate what type and size of DivX video are supported on the certified device. Now, when you encode video, you have the option to force your video to comply with one of the DivX Certified Profiles to ensure that your video will play back properly on certified products. DivX Decoder verification logo. There is a new semi-transparent DivX Logo that will appear by default for a few seconds any time you use the DivX decoder to watch a DivX video. This instantly lets you know you're watching a true DivX® video. You can turn the display of the logo on or off in the codec properties dialog. New internal application programming interface (API). The internal API of the codec was changed to better accommodate integration with third party partners. This only affects you if you are a DivX licensee and are working directly with the DivX object code. The external API (e.g., DirectShow, etc.) remains unchanged. Improved: The motion estimation algorithm is better optimized for High Definition resolutions (up to 1080p, or 1920 x 1080 pixel resolution The pre-processing performance is now improved with with the IYUY 4:2:0 color space Changed: Removed MP4creator and the MPEG-4 file output option due to some compliance issues. This will return in our next release once these issues are resolved. Removed the Intelligent IVTC functionality due to persistent problems caused by lack of variable frame rate file format support. This technology will be back soon in a new form... Changed the block skipping threshold for high quantizers, which improves visual quality when high quantizers are used. Fixed: Fixed a bunch of little cosmetic bugs in the DirectShow decoder properties page. Fixed a bug where the last P frame before an I frame was not displayed when Smooth Playback was selected. Fixed a practically unnoticeable YUV->RGB16 color conversion rounding bug. Fixed a bug that was the cause of some of VirtualDub's "Cannot Start Video Compression" errors. Fixed a few issues with DivX 3.11 compatibility. Modified the decoder to deal with a bug in the old OpenDivX encoder that set the scalability bit incorrectly in certain cases. The DivX decoder can now detect this problem and play the content properly. Fixed a problem where some rounding operations were not done toward zero, as is required by section 7.4 of the spec. This fixed an intra case in MPEG-2 inverse quantization. Fixed a bug where some frames would be corrupted by an out-of-range error. Fixed several rounding issues related to MMX/SSE/SSE2 optimizations. Fixed an MMX bug in RGB32 color conversion. __________________ FUT Fc Ultimate Team Italian Community I Migliori giovani talenti di FC 24

25-01-2003, 08:25	#2
diablo69 Senior Member Iscritto dal: May 2001 Messaggi: 1694	va bè ma....... Una traduzione in italiano non è possibile?? __________________ Vendo Decoder digitale gold box kenwood, per informazioni contattatemi in pvt

25-01-2003, 16:34	#6
pdepon Senior Member Iscritto dal: Oct 2002 Messaggi: 1446	X raptor: grazie dell'informazione. Ciao __________________ Perché non creare un club Matrox RT&RT.X nella sezione video del forum? spero di non essere l'unico a volerlo ... per chi ci sta sentiamoci °Seti Warrior° PIV 2533@3165 + GA 8pe667u2 + 1GB pc2700 + 19160 + fujitzu MAM3 18GB + ... ; athlon xp2100+ + NF7-s + 512MB pc3200 + raid 1 Maxtor 9 + maxtor 740 80 GB + Seagate barracuda ATA IV + Fortissimo III +RT.X100 ...; Athlon 1333 + GA7DXR + 512 MB PC2100 + Raid 1 Maxtor 9 + ...;

25-01-2003, 22:17	#8
diablo69 Senior Member Iscritto dal: May 2001 Messaggi: 1694	codec Codec 5.03 pro con adware,ma sto adware è uno spyware?? Ma come per la versione precedente si puo' disattivare?? Ma questo nuovo codec funziona meglio del 5.02 come qualità?? __________________ Vendo Decoder digitale gold box kenwood, per informazioni contattatemi in pvt

25-01-2003, 22:30	#11
diablo69 Senior Member Iscritto dal: May 2001 Messaggi: 1694	codec Io ho la 5.02 pro scaricato da www.divax .it e poi con un trucchetto ho disattivato i vari spyware,gator ecc.. se la installo su tale versione non si installa l'adware?? __________________ Vendo Decoder digitale gold box kenwood, per informazioni contattatemi in pvt

25-01-2003, 15:32	#3
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	Speriamo che il supporto video interlacciato funzioni bene , sarebbe una grossa svolta per il DivX

25-01-2003, 16:09	#4
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	Pais il 503 è prodotto dalla stessa casa , l'ultimo upgrada il precedente . E se vuoi un consiglio lascia stare il Nimo , cosa te ne fai di tutti quei codec quando poi non li usi

25-01-2003, 16:27	#5
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	Il sito del Nimo è http://nimo.everwicked.com/ ma non va . Il divx 503 lo puoi istallare senza levare il precedente , si sovrascrive Cmq per vedere i film non serve istallare tutti i codec ma solo i decoder , poi vedi te

25-01-2003, 20:58	#7
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	Il decoder 5.03 solo per visionare lo trovi -> QUI Se hai gia il 502 messo basta che lo szippi in C:\windows\system (se hai win 98/me) Se hai 2k o Xp lo devi szippare in C:\windows\system32 Se non hai gia il divx502 dopo aver szippato devi fare START-> ESEGUI e scrivere: regsvr32 /c Divxdec.ax

25-01-2003, 22:20	#9
jumperless Senior Member Iscritto dal: Oct 2001 Città: Cosenza Messaggi: 2128	interessato...

25-01-2003, 22:20	#10
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	Dai il tempo di provarlo Adaware=Spyware Se ,aheamh, hai la 502 full basta che scarichi l'upgrade e così non hai problemi di spy

25-01-2003, 22:35	#12
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	si lo istalla , io parlo della full pro Bundle Non so se il trucchetto per eliminare lo spy funge con la nuova .... ma perchè dannarsi con lo spy? capisce a me

25-01-2003, 23:41	#13
fabianfolle Senior Member Iscritto dal: Dec 2000 Città: Martinsicuro (TE) Messaggi: 1029	mi date un link da dove prendere la versione full senza spyware __________________ Phenom II 960t@X6 GTX1060,Intel I3 7100,I5 4300U ho concluso nel mercatino con:ronald0,orso232,MORCIAS,topolino2808,Jhon16,marcobak,wolfnyght,CaRmeLiTo'S WaY ecc..

25-01-2003, 23:52	#14
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	sul sito divx.com

26-01-2003, 08:16	#15
jumperless Senior Member Iscritto dal: Oct 2001 Città: Cosenza Messaggi: 2128	beh ho provato come dire il trucchetto della 5.02 e funzia... CiaozZ

26-01-2003, 11:39	#17
cnc76 Senior Member Iscritto dal: Oct 2001 Città: Sarzana [SP] Messaggi: 1409	Io ho la 5.02 PRO.... "registrata" ....ma ho visto che ora non è più possibile scaricare la 5.03PRO (quella a pagamento) senza pagare immediatamente.... prima invece pagavi quando ti dava il codice Vabbè... Cmq, per le migliorie (se ci sono veramente) dovrebbero stare nell'attivazione dell'opzione INTERLACED direttamente nel codec?????? Lo chiedo perchè non ho capito molto bene le spiegazioni in inglese. Grazie. Se qualcuno ha fatto già delle prove potrebbe postare i suoi risultati. Grazie. bye by CNC

26-01-2003, 11:47	#18
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	Ti sbagli , ecco il link per scaricare l'upgrade per la 502 gia registrata -> QUI Per il supporto del formato interlacciato ho provato ma non funziona bene

26-01-2003, 11:59	#19
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	quel pacchetto l'ho fatto io , serve SOLO a riprodurre e non a codificare . Riproduce Divx 3/5 Xvid Audio Wma/mp3/ogg/ac3

26-01-2003, 12:03	#20
Paky Senior Member Iscritto dal: Jun 2001 Città: Codice Amico Sorgenia EmidioM56745 Messaggi: 22166	@Pais Semplice , in riproduzione il video denota le seghettature tipiche del video interlacciato. Dobbiamo ancora aspettare per avere Divx con supporto decodifica interlacciata

Strumenti
Mostra una versione stampabile Invia questa pagina per email