[Ubuntu] HWupgrade Clan

[mnovait]

Originariamente inviato da unnilennium

allora, insisto con dire che la vga ati con i driver propietari, non quelli open, funziona. uscita hdmi provata su fisso con 5430, di cui la 63xx del portatile è una leggera evoluzione, e funzionava senza problemi. (considera che sto usando ancora la 10.10, che la 11.04 non mi piace, e mi ha dato problemi indipendenti dalla config hardware) per il touchpad, synaptics sono quelli che funzionano meglio in assoluto, rispetto agli altri. magari i problemi ci sono con le funzionalità avanzate,come il moultitouch, che magari non fuonzione come sotto windows, ma tutto non si può avere. per ora almeno. credo proprio che il wireless resti l'incognita più grossa, però penso che sul wiki di ubuntu, o sul forum, tu possa trovare sicuramente qualche info in più, se hai questi dubbi.

io sul muletto che ho collegato alla tv ho proprio una ati collegata in hdmi, ho abilitato l'accelerazione hw e guardo video 720p e 1080p con consumo della cpu del 5-10%

[cristian_c]

allora, insisto con dire che la vga ati con i driver propietari, non quelli open, funziona. uscita hdmi provata su fisso con 5430, di cui la 63xx del portatile è una leggera evoluzione, e funzionava senza problemi. (considera che sto usando ancora la 10.10, che la 11.04 non mi piace, e mi ha dato problemi indipendenti dalla config hardware)

vorrei esprimere il mio grazie per il feedback che può risultare molto utile sia per me che per tutti
Facendo delle ricerche ero capitato nel sito di amd, e interrogando il database per le due schede (5470 e 6370), per entrambe era uscito fuori questo risultato: http://support.amd.com/us/gpudownloa...eon_linux.aspx. Ora non so se trarre conseguenze definitive da questo, ma è il massimo che sono riuscito a trovare

per il touchpad, synaptics sono quelli che funzionano meglio in assoluto, rispetto agli altri. magari i problemi ci sono con le funzionalità avanzate,come il moultitouch, che magari non fuonzione come sotto windows, ma tutto non si può avere. per ora almeno.

Finora non mi è mai capitato di dover utilizzare touchpad con le funzioni multitouch. Restando il fatto che inserirei il classico scorrimento delle finestre (lo stesso risultato che si ottiene trascinando il cursore sulle barre laterali o premendo sulle freccette delle stesse) tra le funzioni base, non ho mai puntato ad ottenere prestazioni galattiche e funzioni fantascientifiche da un touchpad, mi basta che faccia le cose normali che hanno sempre fatto i touchpad Più che altro mi riferisco al rischio di gravi malfunzionamenti del touchpad nell'interazione con il sistema, come blocchi, attivazione/disattivazione eccetera, fino ad arrivare al totale non riconoscimento della periferica in questione. I possibili problemi che ho elencato purtroppo esistono (anche per synaptics), guardando le varie discussioni che si possono trovare con una ricerca

credo proprio che il wireless resti l'incognita più grossa, però penso che sul wiki di ubuntu, o sul forum, tu possa trovare sicuramente qualche info in più, se hai questi dubbi.

per sicurezza ora ho controllato rigorosamente sia sul forum italiano che internazionale, sia sul wiki italiano che internazionale, ma purtroppo non ho trovato alcun riferimento al modello di notebook che vorrei acquistare

io sul muletto che ho collegato alla tv ho proprio una ati collegata in hdmi, ho abilitato l'accelerazione hw e guardo video 720p e 1080p con consumo della cpu del 5-10%

grazie molte per l'informazione ;-)

[unnilennium]

vabbè il modello preciso non ci sarà, cmq le possibilità sono limitate, ha una scheda wireless che può essere atheros, ralink, o broadcom. ognuna di queste può funzionare con ubuntu,automaticamente o dopo averci messo mano... i driver ci sono.

[adrianocaprio]

Salve,

anzitutto vorrei unirmi anche io al clan. Inoltre vi scrivo per porvi un problema che ho già presentato su altri forum senza trovare però una valida soluzione:
utilizzo ubuntu 10.10 e da molto tempo mi capita che all'avvio del sistema o durante l'utilizzo di questo compaiano, nel pannello in basso, infinite finestre di apertura di file manager e il sistema diventa inutilizzabile (non apre i programmi non visualizza gli sfondi del desk etc...)...insomma il file manager impazzito e per interrompere questa cosa devo mettere in pausa il sistema anche se dopo questa operazione cmq l'Os rimane poco usabile. Premetto che non ho due monitor, non ho docks e che il sistema è installato su un portatile che ha grafica integrata intel.
Vi posto due file che riportano gli errori presenti nel file xsession.error di cui uno indica quando nascono taluni errori.
Spero di trovare consigli o soluzioni diverse da "cambia user".
Grazie.

[restimaxgraf]

Originariamente inviato da adrianocaprio

Salve,

anzitutto vorrei unirmi anche io al clan. Inoltre vi scrivo per porvi un problema che ho già presentato su altri forum senza trovare però una valida soluzione:
utilizzo ubuntu 10.10 e da molto tempo mi capita che all'avvio del sistema o durante l'utilizzo di questo compaiano, nel pannello in basso, infinite finestre di apertura di file manager e il sistema diventa inutilizzabile (non apre i programmi non visualizza gli sfondi del desk etc...)...insomma il file manager impazzito e per interrompere questa cosa devo mettere in pausa il sistema anche se dopo questa operazione cmq l'Os rimane poco usabile. Premetto che non ho due monitor, non ho docks e che il sistema è installato su un portatile che ha grafica integrata intel.
Vi posto due file che riportano gli errori presenti nel file xsession.error di cui uno indica quando nascono taluni errori.
Spero di trovare consigli o soluzioni diverse da "cambia user".
Grazie.

hai altri sistemi operativi su quel pc?hai fatto un test della ram per vedere se è stabile il pc?

[GeneraleMarkus]

Se passassi ad ubuntu definitivamente che programmi di statistica opensource o freeware troverei?

[adrianocaprio]

Originariamente inviato da restimaxgraf

hai altri sistemi operativi su quel pc?hai fatto un test della ram per vedere se è stabile il pc?

Si ho Vista in dual boot e no, non ho fatto il test della ram....Ram? dagli errori mi sembra più qualche conflitto tra file o librerie o cose simili ma sono una frana in queste cose perciò...
Devo dire che da qualche settimana ho notato che al partire del bios viene rilevato un solo processore al posto di due: il mio laptop è un lenovo c200
con intel dual core 1,8ghz...forse non c'entra con il problema in questione ma potrebbe peggiorare la capacità di calcolo della macchina se è vero quello che leggo.
Se vado in monito di sistema leggo:
Memoria 992 mb
Processore 0 : Intel core duo t2350 1,8ghz
Processore 1: "idem"

[restimaxgraf]

Originariamente inviato da adrianocaprio

Si ho Vista in dual boot e no, non ho fatto il test della ram....Ram? dagli errori mi sembra più qualche conflitto tra file o librerie o cose simili ma sono una frana in queste cose perciò...
Devo dire che da qualche settimana ho notato che al partire del bios viene rilevato un solo processore al posto di due: il mio laptop è un lenovo c200
con intel dual core 1,8ghz...forse non c'entra con il problema in questione ma potrebbe peggiorare la capacità di calcolo della macchina se è vero quello che leggo.
Se vado in monito di sistema leggo:
Memoria 992 mb
Processore 0 : Intel core duo t2350 1,8ghz
Processore 1: "idem"

svista è stabile?
apri un terminale digita dmesg e posta il risultato usando il tag code del forum.

[adrianocaprio]

Originariamente inviato da restimaxgraf

svista è stabile?
apri un terminale digita dmesg e posta il risultato usando il tag code del forum.

[14840.068639] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x43f14001)
[14840.068648] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20050500, writing 0x20090500)
[14840.068660] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007)
[14840.068755] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00005, writing 0x2b80005)
[14840.068875] iwl3945 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[14840.068942] iwl3945 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0000000)
[14840.068956] iwl3945 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[14840.068976] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[14840.069125] 8139too 0000:05:01.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[14840.069157] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xf (was 0x74001ff, writing 0x5c001ff)
[14840.069164] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[14840.069171] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[14840.069178] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[14840.069185] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[14840.069192] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000)
[14840.069199] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000)
[14840.069206] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[14840.069213] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[14840.069220] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0090605)
[14840.069229] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0102000)
[14840.069236] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a810)
[14840.069310] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[14840.069317] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[14840.069339] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[14840.069342] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
[14840.069377] sdhci-pci 0000:05:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[14840.069386] sdhci-pci 0000:05:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[14840.069479] r852 0000:05:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
[14840.070017] PM: early resume of devices complete after 1.957 msecs
[14840.071538] i915 0000:00:02.0: setting latency timer to 64
[14840.073388] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[14840.073424] HDA Intel 0000:00:1b.0: setting latency timer to 64
[14840.073536] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[14840.073644] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[14840.073696] usb usb2: root hub lost power or was reset
[14840.073721] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[14840.073799] usb usb3: root hub lost power or was reset
[14840.073823] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[14840.073890] usb usb4: root hub lost power or was reset
[14840.073914] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[14840.073927] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[14840.073945] usb usb5: root hub lost power or was reset
[14840.073960] pci 0000:00:1e.0: setting latency timer to 64
[14840.073981] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[14840.073990] ata_piix 0000:00:1f.2: setting latency timer to 64
[14840.074020] sdhci-pci 0000:05:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[14840.074024] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[14840.075046] sd 0:0:0:0: [sda] Starting disk
[14840.212165] firewire_core: skipped bus generations, destroying all nodes
[14840.220147] PM: resume of drv:usb dev:usb2 complete after 146.083 msecs
[14840.220191] PM: resume of drv:usb dev:usb3 complete after 146.118 msecs
[14840.220205] PM: resume of drv:hub dev:2-0:1.0 complete after 146.122 msecs
[14840.220229] PM: resume of drv:hub dev:3-0:1.0 complete after 146.149 msecs
[14840.220240] PM: resume of drv:usb dev:usb4 complete after 146.147 msecs
[14840.220253] PM: resume of drv:firewire_ohci dev:0000:05:06.0 complete after 146.240 msecs
[14840.220273] PM: resume of drv:hub dev:4-0:1.0 complete after 146.184 msecs
[14840.220285] PM: resume of drv:usb dev:usb5 complete after 146.182 msecs
[14840.220331] PM: resume of drv:hub dev:5-0:1.0 complete after 146.228 msecs
[14840.244695] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[14840.244699] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[14840.260572] ata2.00: configured for UDMA/33
[14840.409483] PM: resume of drv:battery dev:PNP0C0A:00 complete after 293.099 msecs
[14840.712164] firewire_core: rediscovered device fw0
[14843.153391] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[14843.153402] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[14843.173755] ata1.00: configured for UDMA/100
[14843.190602] PM: resume of drv:sd dev:0:0:0:0 complete after 3115.550 msecs
[14843.190624] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2731.152 msecs
[14843.190654] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3115.571 msecs
[14843.328124] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 137.343 msecs
[14843.328273] PM: resume of devices complete after 3258.077 msecs
[14843.328539] PM: resume devices took 3.260 seconds
[14843.328568] PM: Finishing wakeup.
[14843.328571] Restarting tasks ... done.
[14843.348735] video LNXVIDEO:01: Restoring backlight state
[14843.396121] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[14843.584122] Skipping EDID probe due to cached edid
[14843.629475] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14843.632424] eth0: link down
[14843.633000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[14844.643995] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600
[14844.958839] EXT4-fs (sda6): re-mounted. Opts: commit=600
[14856.492539] wlan0: authenticate with 30:46:9a:40:8f:a0 (try 1)
[14856.494893] wlan0: authenticated
[14856.494955] wlan0: associate with 30:46:9a:40:8f:a0 (try 1)
[14856.548495] wlan0: RX AssocResp from 30:46:9a:40:8f:a0 (capab=0x431 status=0 aid=2)
[14856.548506] wlan0: associated
[14856.550799] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14867.392056] wlan0: no IPv6 routers present
[19093.627065] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[19093.675095] EXT4-fs (sda6): re-mounted. Opts: commit=0
[19094.761109] wlan0: deauthenticating from 30:46:9a:40:8f:a0 by local choice (reason=3)
[19094.809604] cfg80211: All devices are disconnected, going to restore regulatory settings
[19094.809613] cfg80211: Restoring regulatory settings
[19094.809617] cfg80211: Calling CRDA to update world regulatory domain
[19095.092010] cfg80211: World regulatory domain updated:
[19095.092015]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19095.092019]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19095.092023]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19095.092026]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19095.092029]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19095.092033]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19095.743449] PM: Syncing filesystems ... done.
[19095.745193] PM: Preparing system for mem sleep
[19095.952297] Freezing user space processes ... (elapsed 0.01 seconds) done.
[19095.968183] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[19095.984139] PM: Entering mem sleep
[19095.984188] Suspending console(s) (use no_console_suspend to debug)
[19095.984994] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[19095.985820] sd 0:0:0:0: [sda] Stopping disk
[19096.077244] ACPI handle has no context!
[19096.078451] ACPI handle has no context!
[19096.078459] sdhci-pci 0000:05:06.1: PCI INT B disabled
[19096.078465] ACPI handle has no context!
[19096.084059] ACPI handle has no context!
[19096.180094] HDA Intel 0000:00:1b.0: PCI INT A disabled
[19096.196020] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.124 msecs
[19096.479808] PM: suspend of drv:sd dev:0:0:0:0 complete after 494.817 msecs
[19096.479823] PM: suspend of drv:scsi dev:target0:0:0 complete after 494.725 msecs
[19096.479836] PM: suspend of drv:scsi dev:host0 complete after 403.019 msecs
[19096.479959] ata_piix 0000:00:1f.2: PCI INT B disabled
[19096.492021] PM: suspend of drv:ata_piix dev:0000:00:1f.2 complete after 413.454 msecs
[19096.492036] PM: suspend of drv: dev:pci0000:00 complete after 412.847 msecs
[19096.492049] PM: suspend of devices complete after 507.428 msecs
[19096.492052] PM: suspend devices took 0.508 seconds
[19096.508340] PM: late suspend of devices complete after 16.283 msecs
[19096.508616] ACPI: Preparing to enter system sleep state S3
[19096.548067] PM: Saving platform NVS memory
[19096.553644] Disabling non-boot CPUs ...
[19096.660027] CPU 1 is now offline
[19096.660032] SMP alternatives: switching to UP code
[19096.665416] Extended CMOS year: 2000
[19096.665416] Back to C!
[19096.665416] PM: Restoring platform NVS memory
[19096.665416] CPU0: Thermal monitoring handled by SMI
[19096.665416] Extended CMOS year: 2000
[19096.665416] Enabling non-boot CPUs ...
[19096.665416] SMP alternatives: switching to SMP code
[19096.670695] Booting Node 0 Processor 1 APIC 0x1
[19096.664940] Initializing CPU#1
[19096.664940] CPU1: Thermal monitoring handled by SMI
[19096.784510] CPU1 is up
[19096.785497] ACPI: Waking up from system sleep state S3
[19097.068253] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[19097.068298] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x44314421)
[19097.068305] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x44104400)
[19097.068311] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x200000f0, writing 0x3030)
[19097.068317] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[19097.068330] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[19097.068392] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x44514441)
[19097.068400] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0x20004040)
[19097.068414] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[19097.068640] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x43f14001)
[19097.068649] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20050500, writing 0x20090500)
[19097.068661] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007)
[19097.068756] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00005, writing 0x2b80005)
[19097.068876] iwl3945 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[19097.068944] iwl3945 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0000000)
[19097.068958] iwl3945 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[19097.068978] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[19097.069127] 8139too 0000:05:01.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[19097.069158] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xf (was 0x74001ff, writing 0x5c001ff)
[19097.069165] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc)
[19097.069171] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xd (was 0x0, writing 0x2800)
[19097.069178] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc)
[19097.069185] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xb (was 0x0, writing 0x2400)
[19097.069192] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000)
[19097.069199] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000)
[19097.069206] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
[19097.069213] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
[19097.069220] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0090605)
[19097.069229] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0102000)
[19097.069236] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a810)
[19097.069309] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[19097.069317] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[19097.069339] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[19097.069342] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
[19097.069378] sdhci-pci 0000:05:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[19097.069386] sdhci-pci 0000:05:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[19097.069480] r852 0000:05:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
[19097.070019] PM: early resume of devices complete after 1.959 msecs
[19097.071526] i915 0000:00:02.0: setting latency timer to 64
[19097.073374] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[19097.073428] HDA Intel 0000:00:1b.0: setting latency timer to 64
[19097.073549] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[19097.073674] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[19097.073724] usb usb2: root hub lost power or was reset
[19097.073784] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[19097.073861] usb usb3: root hub lost power or was reset
[19097.073875] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[19097.073889] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[19097.073908] usb usb4: root hub lost power or was reset
[19097.073926] usb usb5: root hub lost power or was reset
[19097.073939] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[19097.073955] pci 0000:00:1e.0: setting latency timer to 64
[19097.073975] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[19097.073986] ata_piix 0000:00:1f.2: setting latency timer to 64
[19097.074026] sdhci-pci 0000:05:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[19097.074030] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[19097.075085] sd 0:0:0:0: [sda] Starting disk
[19097.209099] firewire_core: skipped bus generations, destroying all nodes
[19097.217092] PM: resume of drv:usb dev:usb5 complete after 142.016 msecs
[19097.217114] PM: resume of drv:firewire_ohci dev:0000:05:06.0 complete after 143.092 msecs
[19097.217125] PM: resume of drv:hub dev:5-0:1.0 complete after 142.041 msecs
[19097.217154] PM: resume of drv:usb dev:usb4 complete after 142.097 msecs
[19097.217190] PM: resume of drv:hub dev:4-0:1.0 complete after 142.119 msecs
[19097.217206] PM: resume of drv:usb dev:usb2 complete after 143.133 msecs
[19097.217228] PM: resume of drv:usb dev:usb3 complete after 143.144 msecs
[19097.217239] PM: resume of drv:hub dev:2-0:1.0 complete after 143.151 msecs
[19097.217251] PM: resume of drv:hub dev:3-0:1.0 complete after 143.162 msecs
[19097.244569] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[19097.244574] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[19097.260492] ata2.00: configured for UDMA/33
[19097.449400] PM: resume of drv:battery dev:PNP0C0A:00 complete after 341.087 msecs
[19097.712093] firewire_core: rediscovered device fw0
[19100.037299] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[19100.037310] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[19100.061601] ata1.00: configured for UDMA/100
[19100.080479] PM: resume of drv:sd dev:0:0:0:0 complete after 3005.388 msecs
[19100.080502] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2582.101 msecs
[19100.080519] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3005.397 msecs
[19100.220055] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 139.393 msecs
[19100.220199] PM: resume of devices complete after 3150.001 msecs
[19100.220468] PM: resume devices took 3.152 seconds
[19100.220497] PM: Finishing wakeup.
[19100.220499] Restarting tasks ... done.
[19100.221019] video LNXVIDEO:01: Restoring backlight state
[19100.319486] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[19100.373163] Skipping EDID probe due to cached edid
[19100.395028] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19100.399665] eth0: link down
[19100.400274] ADDRCONF(NETDEV_UP): eth0: link is not ready
[19101.096678] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[19101.329923] EXT4-fs (sda6): re-mounted. Opts: commit=0
[19103.047258] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[19103.428110] EXT4-fs (sda6): re-mounted. Opts: commit=0
[19113.148561] wlan0: authenticate with 30:46:9a:40:8f:a0 (try 1)
[19113.151052] wlan0: authenticated
[19113.151112] wlan0: associate with 30:46:9a:40:8f:a0 (try 1)
[19113.204655] wlan0: RX AssocResp from 30:46:9a:40:8f:a0 (capab=0x431 status=0 aid=2)
[19113.204665] wlan0: associated
[19113.206677] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[19122.679236] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[19123.007836] EXT4-fs (sda6): re-mounted. Opts: commit=0
[19123.696023] wlan0: no IPv6 routers present
[19124.188148] wlan0: deauthenticating from 30:46:9a:40:8f:a0 by local choice (reason=3)
[19124.232152] cfg80211: All devices are disconnected, going to restore regulatory settings
[19124.232166] cfg80211: Restoring regulatory settings
[19124.232175] cfg80211: Calling CRDA to update world regulatory domain
[19124.250534] cfg80211: World regulatory domain updated:
[19124.250538]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19124.250542]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19124.250546]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19124.250549]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19124.250553]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19124.250556]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19124.712158] PM: Marking nosave pages: 0000000000002000 - 0000000000010000
[19124.712163] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[19124.712168] PM: Basic memory bitmaps created
[19124.712171] PM: Syncing filesystems ... done.
[19124.836853] Freezing user space processes ... (elapsed 0.01 seconds) done.
[19124.852089] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[19124.868125] PM: Preallocating image memory... done (allocated 155635 pages)
[19129.302845] PM: Allocated 622540 kbytes in 4.43 seconds (140.52 MB/s)
[19129.302848] Suspending console(s) (use no_console_suspend to debug)
[19129.318130] ACPI handle has no context!
[19129.318646] ACPI handle has no context!
[19129.319647] ACPI handle has no context!
[19129.319656] sdhci-pci 0000:05:06.1: PCI INT B disabled
[19129.319663] ACPI handle has no context!
[19129.424173] HDA Intel 0000:00:1b.0: PCI INT A disabled
[19129.440019] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 120.150 msecs
[19129.521014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[19129.521108] PM: freeze of drv:sd dev:0:0:0:0 complete after 203.691 msecs
[19129.521120] PM: freeze of drv:scsi dev:target0:0:0 complete after 203.685 msecs
[19129.521135] PM: freeze of drv:scsi dev:host0 complete after 203.414 msecs
[19129.521260] ata_piix 0000:00:1f.2: PCI INT B disabled
[19129.521265] PM: freeze of drv:ata_piix dev:0000:00:1f.2 complete after 201.527 msecs
[19129.521280] PM: freeze of drv: dev:pci0000:00 complete after 201.185 msecs
[19129.521293] PM: freeze of devices complete after 218.056 msecs
[19129.522265] PM: late freeze of devices complete after 0.968 msecs
[19129.522655] ACPI: Preparing to enter system sleep state S4
[19129.608059] PM: Saving platform NVS memory
[19129.613725] Disabling non-boot CPUs ...
[19129.716017] CPU 1 is now offline
[19129.716021] SMP alternatives: switching to UP code
[19129.721275] Extended CMOS year: 2000
[19129.721375] PM: Creating hibernation image:
[19129.724007] PM: Need to copy 102105 pages
[19129.724007] PM: Normal pages needed: 89209 + 1024, available pages: 144676
[19129.724007] PM: Restoring platform NVS memory
[19129.724007] CPU0: Thermal monitoring handled by SMI
[19129.724007] Extended CMOS year: 2000
[19129.724007] Enabling non-boot CPUs ...
[19129.724007] SMP alternatives: switching to SMP code
[19129.726532] Booting Node 0 Processor 1 APIC 0x1
[19129.720909] Initializing CPU#1
[19129.720909] CPU1: Thermal monitoring handled by SMI
[19129.832502] CPU1 is up
[19129.833503] ACPI: Waking up from system sleep state S4
[19129.960260] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[19129.960612] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20050500, writing 0x20090500)
[19129.960714] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005)
[19129.960909] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[19129.961089] yenta_cardbus 0000:05:04.0: restoring config space at offset 0xf (was 0x74001ff, writing 0x5c001ff)
[19129.961117] yenta_cardbus 0000:05:04.0: restoring config space at offset 0x3 (was 0x24008, writing 0x2a810)
[19129.976022] firewire_ohci 0000:05:06.0: BAR 0: set to [mem 0xd0100800-0xd0100fff] (PCI address [0xd0100800-0xd0100fff]
[19129.976054] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[19129.976062] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[19129.992020] sdhci-pci 0000:05:06.1: BAR 0: set to [mem 0xd0100400-0xd01004ff] (PCI address [0xd0100400-0xd01004ff]
[19129.992052] sdhci-pci 0000:05:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[19129.992060] sdhci-pci 0000:05:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[19129.992154] r852 0000:05:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
[19129.992700] PM: early restore of devices complete after 32.634 msecs
[19130.035215] i915 0000:00:02.0: setting latency timer to 64
[19130.037336] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[19130.037369] HDA Intel 0000:00:1b.0: setting latency timer to 64
[19130.037498] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[19130.037659] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[19130.037723] usb usb2: root hub lost power or was reset
[19130.037751] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[19130.037804] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[19130.037832] usb usb3: root hub lost power or was reset
[19130.037864] usb usb4: root hub lost power or was reset
[19130.037868] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[19130.037894] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[19130.037920] usb usb5: root hub lost power or was reset
[19130.037929] pci 0000:00:1e.0: setting latency timer to 64
[19130.037949] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[19130.037956] ata_piix 0000:00:1f.2: setting latency timer to 64
[19130.037991] sdhci-pci 0000:05:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[19130.037995] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[19130.039102] sd 0:0:0:0: [sda] Starting disk
[19130.039998] usb usb1: root hub lost power or was reset
[19130.043894] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[19130.125061] firewire_core: skipped bus generations, destroying all nodes
[19130.177050] PM: restore of drv:usb dev:usb1 complete after 138.009 msecs
[19130.177059] PM: restore of drv:hub dev:1-0:1.0 complete after 138.015 msecs
[19130.181041] PM: restore of drv:usb dev:usb4 complete after 141.963 msecs
[19130.181064] PM: restore of drv:usb dev:usb2 complete after 142.008 msecs
[19130.181072] PM: restore of drv:hub dev:2-0:1.0 complete after 142.008 msecs
[19130.181092] PM: restore of drv:usb dev:usb5 complete after 142.003 msecs
[19130.181100] PM: restore of drv:hub dev:5-0:1.0 complete after 142.003 msecs
[19130.181120] PM: restore of drv:usb dev:usb3 complete after 142.052 msecs
[19130.181128] PM: restore of drv:hub dev:3-0:1.0 complete after 142.053 msecs
[19130.181136] PM: restore of drv:hub dev:4-0:1.0 complete after 142.050 msecs
[19130.201743] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[19130.201748] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[19130.201824] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[19130.201828] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[19130.217705] ata2.00: configured for UDMA/33
[19130.217838] ata1.00: configured for UDMA/100
[19130.236046] PM: restore of drv:sd dev:0:0:0:0 complete after 196.941 msecs
[19130.236057] PM: restore of drv:scsi_device dev:0:0:0:0 complete after 196.101 msecs
[19130.317246] PM: restore of drv:ac dev:ACPI0003:00 complete after 273.127 msecs
[19130.625053] firewire_core: rediscovered device fw0
[19130.771473] PM: restore of drv:i915 dev:0000:00:02.0 complete after 737.327 msecs
[19131.100400] PM: restore of drv:battery dev:PNP0C0A:00 complete after 783.076 msecs
[19131.284078] PM: restore of drv:pcmcia_socket dev:pcmcia_socket0 complete after 135.945 msecs
[19131.284232] PM: restore of devices complete after 1250.463 msecs
[19131.284516] PM: Image restored successfully.
[19131.284519] Restarting tasks ... done.
[19131.287286] PM: Basic memory bitmaps freed
[19131.287301] video LNXVIDEO:01: Restoring backlight state
[19134.979038] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[19136.585775] Skipping EDID probe due to cached edid
[19147.961285] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19147.995750] eth0: link down
[19147.996439] ADDRCONF(NETDEV_UP): eth0: link is not ready
[19157.171917] wlan0: authenticate with 30:46:9a:40:8f:a0 (try 1)
[19157.174618] wlan0: authenticated
[19157.174680] wlan0: associate with 30:46:9a:40:8f:a0 (try 1)
[19157.228748] wlan0: RX AssocResp from 30:46:9a:40:8f:a0 (capab=0x431 status=0 aid=2)
[19157.228758] wlan0: associated
[19157.230731] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[19158.369391] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[19161.424609] EXT4-fs (sda6): re-mounted. Opts: commit=0
[19167.488045] wlan0: no IPv6 routers present

[restimaxgraf]

l' hai dato a macchina appena avviata?

[adrianocaprio]

Originariamente inviato da restimaxgraf

l' hai dato a macchina appena avviata?

No, è accesa da ieri e ieri sera l'ho ibernata per poi riaccenderla stamane...fa qualcosa?

[restimaxgraf]

Originariamente inviato da adrianocaprio

No, è accesa da ieri e ieri sera l'ho ibernata per poi riaccenderla stamane...fa qualcosa?

te l' ho chiesto apposta, perchè invece di mostrare i log di avvio, mostra in parte quelli dell' uscita dall ibernazione.
i log di avvio servono per vedere se al boot ci son problemi con qualche componente.

[adrianocaprio]

Originariamente inviato da restimaxgraf

te l' ho chiesto apposta, perchè invece di mostrare i log di avvio, mostra in parte quelli dell' uscita dall ibernazione.
i log di avvio servono per vedere se al boot ci son problemi con qualche componente.

[    0.336369] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.336619] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.336869] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.337116] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.337361] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.337483] HEST: Table is not found!
[    0.337657] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.337698] vgaarb: loaded
[    0.338127] SCSI subsystem initialized
[    0.338315] libata version 3.00 loaded.
[    0.338450] usbcore: registered new interface driver usbfs
[    0.338490] usbcore: registered new interface driver hub
[    0.338551] usbcore: registered new device driver usb
[    0.338871] ACPI: WMI: Mapper loaded
[    0.338877] PCI: Using ACPI for IRQ routing
[    0.338884] PCI: pci_cache_line_size set to 64 bytes
[    0.339090] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    0.339098] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.339105] reserve RAM buffer: 000000003f6e0000 - 000000003fffffff 
[    0.339337] NetLabel: Initializing
[    0.339343] NetLabel:  domain hash size = 128
[    0.339347] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.339378] NetLabel:  unlabeled traffic allowed by default
[    0.339457] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.339471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.339485] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.344256] Switching to clocksource tsc
[    0.372639] AppArmor: AppArmor Filesystem Enabled
[    0.372673] pnp: PnP ACPI init
[    0.372714] ACPI: bus type pnp registered
[    0.395333] pnp: PnP ACPI: found 11 devices
[    0.395340] ACPI: ACPI bus type pnp unregistered
[    0.395348] PnPBIOS: Disabled by ACPI PNP
[    0.395388] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.395397] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.395406] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.395414] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.395423] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.395431] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.395440] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.395449] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.395469] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.395478] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.395486] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.395494] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.395502] system 00:06: [io  0x1640-0x164f] has been reserved
[    0.395510] system 00:06: [io  0xfe00-0xfe7f] has been reserved
[    0.395518] system 00:06: [io  0xff00-0xff7f] has been reserved
[    0.395534] system 00:07: [io  0x06a0-0x06af] has been reserved
[    0.395542] system 00:07: [io  0x06b0-0x06ff] has been reserved
[    0.434277] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.434291] pci 0000:00:1c.0: BAR 14: assigned [mem 0x44000000-0x441fffff]
[    0.434300] pci 0000:00:1c.0: BAR 15: assigned [mem 0x44200000-0x443fffff 64bit pref]
[    0.434310] pci 0000:00:1c.1: BAR 15: assigned [mem 0x44400000-0x445fffff 64bit pref]
[    0.434320] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.434329] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.434337] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.434346] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.434359] pci 0000:00:1c.0:   bridge window [mem 0x44000000-0x441fffff]
[    0.434371] pci 0000:00:1c.0:   bridge window [mem 0x44200000-0x443fffff 64bit pref]
[    0.434387] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.434395] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.434408] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.434420] pci 0000:00:1c.1:   bridge window [mem 0x44400000-0x445fffff 64bit pref]
[    0.434440] pci 0000:05:04.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.434449] pci 0000:05:04.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[    0.434458] pci 0000:05:04.0: BAR 0: assigned [mem 0xd0102000-0xd0102fff]
[    0.434472] pci 0000:05:04.0: BAR 0: set to [mem 0xd0102000-0xd0102fff] (PCI address [0xd0102000-0xd0102fff]
[    0.434482] pci 0000:05:04.0: BAR 13: assigned [io  0x2400-0x24ff]
[    0.434490] pci 0000:05:04.0: BAR 14: assigned [io  0x2800-0x28ff]
[    0.434497] pci 0000:05:04.0: CardBus bridge to [bus 06-09]
[    0.434504] pci 0000:05:04.0:   bridge window [io  0x2400-0x24ff]
[    0.434515] pci 0000:05:04.0:   bridge window [io  0x2800-0x28ff]
[    0.434528] pci 0000:05:04.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.434540] pci 0000:05:04.0:   bridge window [mem 0x48000000-0x4bffffff]
[    0.434551] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.434560] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.434573] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.434584] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.434624]   alloc irq_desc for 17 on node -1
[    0.434630]   alloc kstat_irqs on node -1
[    0.434647] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.434660] pci 0000:00:1c.0: setting latency timer to 64
[    0.434680]   alloc irq_desc for 16 on node -1
[    0.434685]   alloc kstat_irqs on node -1
[    0.434696] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.434706] pci 0000:00:1c.1: setting latency timer to 64
[    0.434720] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    0.434733] pci 0000:00:1e.0: setting latency timer to 64
[    0.434754] pci 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.434768] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.434775] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.434783] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.434790] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff]
[    0.434798] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref]
[    0.434806] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.434813] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
[    0.434821] pci_bus 0000:03: resource 2 [mem 0x44400000-0x445fffff 64bit pref]
[    0.434829] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.434836] pci_bus 0000:05: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.434843] pci_bus 0000:05: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.434850] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.434857] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
[    0.434865] pci_bus 0000:06: resource 0 [io  0x2400-0x24ff]
[    0.434872] pci_bus 0000:06: resource 1 [io  0x2800-0x28ff]
[    0.434879] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.434907] pci_bus 0000:06: resource 3 [mem 0x48000000-0x4bffffff]
[    0.434999] NET: Registered protocol family 2
[    0.435174] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.435768] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.437341] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.438134] TCP: Hash tables configured (established 131072 bind 65536)
[    0.438141] TCP reno registered
[    0.438149] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.438176] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.438384] NET: Registered protocol family 1
[    0.438427] pci 0000:00:02.0: Boot video device
[    0.438629] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.438695] Simple Boot Flag at 0x36 set to 0x1
[    0.439178] cpufreq-nforce2: No nForce2 chipset.
[    0.439258] Scanning for low memory corruption every 60 seconds
[    0.439608] audit: initializing netlink socket (disabled)
[    0.439633] type=2000 audit(1310378860.436:1): initialized
[    0.468501] highmem bounce pool size: 64 pages
[    0.468516] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.472671] VFS: Disk quotas dquot_6.5.2
[    0.472835] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.474428] fuse init (API version 7.14)
[    0.474678] msgmni has been set to 1709
[    0.934679] Freeing initrd memory: 10524k freed
[    0.949595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.949605] io scheduler noop registered
[    0.949611] io scheduler deadline registered
[    0.949652] io scheduler cfq registered (default)
[    0.949952] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.950029]   alloc irq_desc for 40 on node -1
[    0.950035]   alloc kstat_irqs on node -1
[    0.950058] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.950278] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.950350]   alloc irq_desc for 41 on node -1
[    0.950355]   alloc kstat_irqs on node -1
[    0.950372] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.950638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.950836] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.951092] intel_idle: MWAIT substates: 0x22220
[    0.951099] intel_idle: does not run on family 6 model 14
[    0.953177] ACPI: AC Adapter [ACAD] (on-line)
[    0.953401] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.953490] ACPI: Lid Switch [LID0]
[    0.953621] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.953633] ACPI: Power Button [PWRB]
[    0.953796] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.953806] ACPI: Power Button [PWRF]
[    0.954289] ACPI: acpi_idle registered with cpuidle
[    0.964234] Marking TSC unstable due to TSC halts in idle
[    0.964354] Switching to clocksource hpet
[    1.006995] ACPI: Invalid active0 threshold
[    1.009328] thermal LNXTHERM:01: registered as thermal_zone0
[    1.009352] ACPI: Thermal Zone [TZ00] (59 C)
[    1.009538] ERST: Table is not found!
[    1.009639] isapnp: Scanning for PnP cards...
[    1.010093] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.014001] brd: module loaded
[    1.015496] loop: module loaded
[    1.015946] ata_piix 0000:00:1f.2: version 2.13
[    1.015978]   alloc irq_desc for 19 on node -1
[    1.015984]   alloc kstat_irqs on node -1
[    1.016024] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.016036] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.097189] ACPI: Battery Slot [BAT1] (battery present)
[    1.176038] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.176189] scsi0 : ata_piix
[    1.176388] scsi1 : ata_piix
[    1.178789] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    1.178798] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    1.179736] Fixed MDIO Bus: probed
[    1.179829] PPP generic driver version 2.4.2
[    1.179934] tun: Universal TUN/TAP device driver, 1.6
[    1.179940] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.180168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.180209]   alloc irq_desc for 23 on node -1
[    1.180215]   alloc kstat_irqs on node -1
[    1.180227] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.180248] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.180257] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.180343] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.180399] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.180421] ehci_hcd 0000:00:1d.7: debug port 1
[    1.184329] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.184479] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[    1.200027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.200321] hub 1-0:1.0: USB hub found
[    1.200334] hub 1-0:1.0: 8 ports detected
[    1.200536] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.200574] uhci_hcd: USB Universal Host Controller Interface driver
[    1.200625] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.200640] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.200648] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.200738] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.200781] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.201080] hub 2-0:1.0: USB hub found
[    1.201092] hub 2-0:1.0: 2 ports detected
[    1.201242] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.201256] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.201264] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.201354] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.201413] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.201715] hub 3-0:1.0: USB hub found
[    1.201727] hub 3-0:1.0: 2 ports detected
[    1.201874]   alloc irq_desc for 18 on node -1
[    1.201879]   alloc kstat_irqs on node -1
[    1.201892] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.201905] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.201914] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.202010] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.202071] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.202375] hub 4-0:1.0: USB hub found
[    1.202386] hub 4-0:1.0: 2 ports detected
[    1.202539] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.202554] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.202562] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.202648] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.202707] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.203014] hub 5-0:1.0: USB hub found
[    1.203025] hub 5-0:1.0: 2 ports detected
[    1.203339] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.221394] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.241432] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.241448] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.241522] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.241587] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.241651] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.241913] mice: PS/2 mouse device common for all mice
[    1.242797] rtc_cmos 00:08: RTC can wake from S4
[    1.242891] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.242942] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.243217] device-mapper: uevent: version 1.0.3
[    1.243471] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[    1.243645] device-mapper: multipath: version 1.1.1 loaded
[    1.243657] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.243948] EISA: Probing bus 0 at eisa.0
[    1.243961] Cannot allocate resource for EISA slot 1
[    1.243967] Cannot allocate resource for EISA slot 2
[    1.243974] Cannot allocate resource for EISA slot 3
[    1.243980] Cannot allocate resource for EISA slot 4
[    1.244031] EISA: Detected 0 cards.
[    1.244336] cpuidle: using governor ladder
[    1.244554] cpuidle: using governor menu
[    1.245366] TCP cubic registered
[    1.245723] NET: Registered protocol family 10
[    1.246724] lo: Disabled Privacy Extensions
[    1.247378] NET: Registered protocol family 17
[    1.248641] Using IPI No-Shortcut mode
[    1.248731] PM: Resume from disk failed.
[    1.248747] registered taskstats version 1
[    1.249099]   Magic number: 3:954:122
[    1.249152] acpi LNXSYBUS:00: hash matches
[    1.249197] rtc_cmos 00:08: setting system clock to 2011-07-11 10:07:41 UTC (1310378861)
[    1.249201] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.249203] EDD information not available.
[    1.258572] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.348783] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850, RB31, max UDMA/33
[    1.348937] ata1.00: ATA-7: HITACHI HTS541612J9SA00, SBDIC7JP, max UDMA/100
[    1.348941] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.363868] isapnp: No Plug & Play device found
[    1.364606] ata1.00: configured for UDMA/100
[    1.364714] ata2.00: configured for UDMA/33
[    1.364863] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54161 SBDI PQ: 0 ANSI: 5
[    1.365019] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.365025] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.365117] sd 0:0:0:0: [sda] Write Protect is off
[    1.365121] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.365262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.365475]  sda:
[    1.367780] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850   RB31 PQ: 0 ANSI: 5
[    1.372487] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.372495] Uniform CD-ROM driver Revision: 3.20
[    1.372711] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.372831] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.385661]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.438890] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.438949] Freeing unused kernel memory: 688k freed
[    1.439432] Write protecting the kernel text: 4944k
[    1.439492] Write protecting the kernel read-only data: 1976k
[    1.458201] udev[79]: starting version 163
[    1.561900] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.561931] 8139cp 0000:05:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.569302] firewire_ohci 0000:05:06.0: enabling device (0000 -> 0002)
[    1.569318]   alloc irq_desc for 22 on node -1
[    1.569321]   alloc kstat_irqs on node -1
[    1.569332] firewire_ohci 0000:05:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.569343] firewire_ohci 0000:05:06.0: setting latency timer to 64
[    1.576841] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.576934] sdhci: Secure Digital Host Controller Interface driver
[    1.576936] sdhci: Copyright(c) Pierre Ossman
[    1.665058] firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[    1.665148]   alloc irq_desc for 21 on node -1
[    1.665156]   alloc kstat_irqs on node -1
[    1.665172] 8139too 0000:05:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.665194] 8139too 0000:05:01.0: setting latency timer to 64
[    1.666609] 8139too 0000:05:01.0: eth0: RealTek RTL8139 at 0x2000, 00:0f:b0:d4:97:0a, IRQ 21
[    1.666643] sdhci-pci 0000:05:06.1: SDHCI controller found [1180:0822] (rev 19)
[    1.666658] sdhci-pci 0000:05:06.1: enabling device (0000 -> 0002)
[    1.666665] sdhci-pci 0000:05:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    1.667689] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.667699] sdhci-pci 0000:05:06.1: setting latency timer to 64
[    1.668732] Registered led device: mmc0::
[    1.669782] mmc0: SDHCI controller on PCI [0000:05:06.1] using DMA
[    2.156248] firewire_core: created device fw0: GUID 00023f73a0406c5f, S400
[    2.519969] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   22.119067] udev[324]: starting version 163
[   22.372958] Adding 1027068k swap on /dev/sda7.  Priority:-1 extents:1 across:1027068k 
[   22.663328] type=1400 audit(1310371682.909:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=524 comm="apparmor_parser"
[   22.664068] type=1400 audit(1310371682.913:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=524 comm="apparmor_parser"
[   22.664461] type=1400 audit(1310371682.913:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=524 comm="apparmor_parser"
[   22.705518] lp: driver loaded but no devices found
[   22.939015] ACPI Warning: _BQC returned an invalid level (20100428/video-640)
[   22.950103] intel_rng: FWH not detected
[   22.956159] acpi device:04: registered as cooling_device2
[   22.956344] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[   22.956414] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   22.967965] Linux agpgart interface v0.103
[   23.001295] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[   23.002015] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   23.005101] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   23.010026] leds_ss4200: no LED devices found
[   23.046780] yenta_cardbus 0000:05:04.0: CardBus bridge found [17aa:3828]
[   23.046811] yenta_cardbus 0000:05:04.0: Using CSCINT to route CSC interrupts to PCI
[   23.046814] yenta_cardbus 0000:05:04.0: Routing CardBus interrupts to PCI
[   23.046822] yenta_cardbus 0000:05:04.0: TI: mfunc 0x01111c12, devctl 0x44
[   23.204353] cfg80211: Calling CRDA to update world regulatory domain
[   23.209974] cfg80211: World regulatory domain updated:
[   23.209978]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.209982]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.209985]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.209989]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.209992]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.209995]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.276863] yenta_cardbus 0000:05:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   23.276869] yenta_cardbus 0000:05:04.0: Socket status: 30000006
[   23.276874] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
[   23.276886] yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[   23.276890] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff 0x2800-0x28ff
[   23.283605] yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge window: [mem 0xd0100000-0xd01fffff]
[   23.283610] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0100000-0xd01fffff: excluding 0xd0100000-0xd010ffff
[   23.283628] yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[   23.283632] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff
[   23.331440] r852 0000:05:06.3: enabling device (0000 -> 0002)
[   23.331451] r852 0000:05:06.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[   23.331460] r852 0000:05:06.3: setting latency timer to 64
[   23.331532] r852: Non dma capable device detected, dma disabled
[   23.331545] r852: driver loaded succesfully
[   23.385090] [drm] Initialized drm 1.1.0 20060810
[   23.546513] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   23.546518] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[   23.546613] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   23.546629] iwl3945 0000:03:00.0: setting latency timer to 64
[   23.600946] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   23.600950] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   23.601085]   alloc irq_desc for 42 on node -1
[   23.601088]   alloc kstat_irqs on node -1
[   23.601122] iwl3945 0000:03:00.0: irq 42 for MSI/MSI-X
[   23.618164] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   23.620297] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   23.621219] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   23.621973] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   23.622779] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xe3fff 0xe8000-0xfffff
[   23.622856] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   23.622928] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   23.623003] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   23.677891] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
[   23.747507] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[   23.764748] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.764755] i915 0000:00:02.0: setting latency timer to 64
[   23.768005] [drm] set up 7M of stolen space
[   23.873866] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   23.874371] [drm] initialized overlay support
[   24.041915] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   24.189073] Skipping EDID probe due to cached edid
[   24.562326] Console: switching to colour frame buffer device 128x48
[   24.566113] fb0: inteldrmfb frame buffer device
[   24.566115] drm: registered panic notifier
[   24.566119] Slow work thread pool: Starting up
[   24.566254] Slow work thread pool: Ready
[   24.566267] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   24.617089] Skipping EDID probe due to cached edid
[   24.898909] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   24.898966]   alloc irq_desc for 43 on node -1
[   24.898969]   alloc kstat_irqs on node -1
[   24.898984] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   24.899021] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   25.169111] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   25.542223] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   27.051838] type=1400 audit(1310371687.297:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=867 comm="apparmor_parser"
[   27.052725] type=1400 audit(1310371687.301:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=867 comm="apparmor_parser"
[   27.495073] type=1400 audit(1310371687.741:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=959 comm="apparmor_parser"
[   27.495405] type=1400 audit(1310371687.741:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=960 comm="apparmor_parser"
[   27.496120] type=1400 audit(1310371687.745:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=960 comm="apparmor_parser"
[   27.496512] type=1400 audit(1310371687.745:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=960 comm="apparmor_parser"
[   27.501253] type=1400 audit(1310371687.749:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=963 comm="apparmor_parser"
[   27.552702] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[   27.640971] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.643213] eth0: link down
[   27.643480] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.696856] ppdev: user-space parallel port driver
[   27.905199] Skipping EDID probe due to cached edid
[   28.225135] Skipping EDID probe due to cached edid
[   31.094621] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   31.136114] Skipping EDID probe due to cached edid
[   31.456104] Skipping EDID probe due to cached edid
[   31.735395] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   31.777155] Skipping EDID probe due to cached edid
[   32.097041] Skipping EDID probe due to cached edid
[   33.631163] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   33.760122] Skipping EDID probe due to cached edid
[   38.099633] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   38.304098] Skipping EDID probe due to cached edid
[   42.795118] wlan0: authenticate with 30:46:9a:40:8f:a0 (try 1)
[   42.797455] wlan0: authenticated
[   42.797950] wlan0: associate with 30:46:9a:40:8f:a0 (try 1)
[   42.851939] wlan0: RX AssocResp from 30:46:9a:40:8f:a0 (capab=0x431 status=0 aid=2)
[   42.851946] wlan0: associated
[   42.853665] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.967881] padlock: VIA PadLock not detected.
[   53.632055] wlan0: no IPv6 routers present

Questo è quanto viene mostrato all'avvio: tieni presente che l'hd ha anche una partizione "DATI" che però non viene montata all'avvio ma solo se ci clicco sopra.

[restimaxgraf]

Originariamente inviato da adrianocaprio

Questo è quanto viene mostrato all'avvio: tieni presente che l'hd ha anche una partizione "DATI" che però non viene montata all'avvio ma solo se ci clicco sopra.

non ci son errori rilevanti.
mentre nei file che hai postato l' errore potrebbe esser un bug.
hai per caso installato temi o set di icone o simili? il problema sè presentato dall' inizio?il sistema è aggiornato?

[adrianocaprio]

Originariamente inviato da restimaxgraf

non ci son errori rilevanti.
mentre nei file che hai postato l' errore potrebbe esser un bug.
hai per caso installato temi o set di icone o simili? il problema sè presentato dall' inizio?il sistema è aggiornato?

Il problema non era sicuramente presente all'inizio ne però posso dire con esattezza quando si è presentato. Certo è, a quanto ho potuto capire, riguarda compiz e la grafica perchè si presenta sopratutto nella riproduzione, in massa, di file in streaming. Agli inizi ho istallato delle dock che però ho subito cancellato e temi attravero l'Art Manager ma ho poi ripristinato le impostazioni iniziali....sinceramente non so dove sbattere la testa. Ho visto sui forum internazionali e il problema sembra essere legato o alla scheda grafica (ma io non ho nvidia anche se il file da quell'errore) o al player gplayer (che non ho) o ad una cattiva configurazione di due monitor (che non ho)...qualcuno sul forum di ubuntu mi ha consigliato di cambiare utente vedendo così anche se l'errore è a livello di sistema o meno ma la trovo una soluzione piuttosto precaria...anche io credevo fosse un bug ed effettivamente con gli ultimi aggiornamenti anche del kernel sebrava che il problema fosse risolto ma invece....

[restimaxgraf]

Originariamente inviato da adrianocaprio

Il problema non era sicuramente presente all'inizio ne però posso dire con esattezza quando si è presentato. Certo è, a quanto ho potuto capire, riguarda compiz e la grafica perchè si presenta sopratutto nella riproduzione, in massa, di file in streaming. Agli inizi ho istallato delle dock che però ho subito cancellato e temi attravero l'Art Manager ma ho poi ripristinato le impostazioni iniziali....sinceramente non so dove sbattere la testa. Ho visto sui forum internazionali e il problema sembra essere legato o alla scheda grafica (ma io non ho nvidia anche se il file da quell'errore) o al player gplayer (che non ho) o ad una cattiva configurazione di due monitor (che non ho)...qualcuno sul forum di ubuntu mi ha consigliato di cambiare utente vedendo così anche se l'errore è a livello di sistema o meno ma la trovo una soluzione piuttosto precaria...anche io credevo fosse un bug ed effettivamente con gli ultimi aggiornamenti anche del kernel sebrava che il problema fosse risolto ma invece....

prova a cercare qualche guida sul forum ufficiale per fare un po' di pulizia e installa il rimuovi pacchetti orfani, presumibilmente hai installato qualcosa che ha creato problemi e non è stata rimossa del tutto.

[Phantom II]

Originariamente inviato da restimaxgraf

prova a cercare qualche guida sul forum ufficiale per fare un po' di pulizia e installa il rimuovi pacchetti orfani, presumibilmente hai installato qualcosa che ha creato problemi e non è stata rimossa del tutto.

Per questo lavoro Ubuntu Tweak dovrebbe andare bene.

[adrianocaprio]

Originariamente inviato da Phantom II

Per questo lavoro Ubuntu Tweak dovrebbe andare bene.

è il primo programma che ho installato dopo il sistema operativo!!!! lo utilizzo spesso e devo dire che è proprio un utilissimo programma...cmq tutto quello che c'era da pulire è stato pulito. Stamattina il problema si è presentato mentre stavo sfogliavo le cartelle, per la prima volta...ho dovuto riavviare la macchina.

[restimaxgraf]

Originariamente inviato da adrianocaprio

è il primo programma che ho installato dopo il sistema operativo!!!! lo utilizzo spesso e devo dire che è proprio un utilissimo programma...cmq tutto quello che c'era da pulire è stato pulito. Stamattina il problema si è presentato mentre stavo sfogliavo le cartelle, per la prima volta...ho dovuto riavviare la macchina.

prova a disattivare tutti gli effetti grafici, e se non risolvi nemmeno così prova effettivamente a creare un' altro utente e a usare il pc da quello e vedi come va, tanto servono pochi secondi per farlo.

[adrianocaprio]

Originariamente inviato da restimaxgraf

prova a disattivare tutti gli effetti grafici, e se non risolvi nemmeno così prova effettivamente a creare un' altro utente e a usare il pc da quello e vedi come va, tanto servono pochi secondi per farlo.

in che modo disattivo tutti gli effetti grafici?