|
|||||||
|
|
|
 |
|
|
Strumenti |
03-12-2005, 18:21
|
#1 |
|
Senior Member
Iscritto dal: Oct 2001
Messaggi: 7906
|
Strano problema con l'hd
Ciao
praticamente ho un problema col mio seagate da 120gb, ma nn sembra il solito problema!quando avvio win, col disco attaccato mi da schermata blu e si riavvia e raramente arriva fino a win con disco staccato tutto parte normalmente il disco è correttamente rilevato dal bios e nn ci sono errori nelle partizioni, xò c'è questa maledetta schermata blu! ho provato a fare una diagnosi con il seatools e nei test il disco sembra singhiozzare, molto. questo è il report SeaTools Desktop v3.02.03 Copyright (c) 2005 Kroll Ontrack Inc. 12/3/2005 @ 4:10 PM The following information has been generated by SeaTools Desktop. Use this information to help you recognize and resolve potential data access problems. System Information: BIOS Date 07/06/05 Conventional Memory size 628 K Extended Memory size 58532 K IO Channel type PCI Drive Information: SIZE MODEL --------- --------------------- 120 GB ST3120026A Serial Number = xxxxxxxxxx Int13 Num = 80, PHYS CHS = 16383x16x63. ParmTable CHS, Rsvd = 14593x255x63 PARTITION CYLINDER SIZE ---------- ------------ ---- # Type Start End MB PRIMARY 1 NTFS 0 21975 112817 EXTENDED 2 Unknown 21976 35972 7224 Diagnostic Results: Seagate DiagATA Quick Test Result: Skipped Recommendation: The "Quick Test" is adequate for most situations. Consider running the "Full Test" which verifies each sector on the drive if you need to run a more comprehensive diagnostic. Results from Seagate's DiagATA/SCSI: ----------------------------------------------------------------- DIAGATA.EXE Version 3.08.50328ML Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved. ----------------------------------------------------------------- Timer Resolution: 0.000122 Short Test Begin: 03-Dec-2005 15:57:05 Cable Test - 0 Errors Buffer Test - 0 Errors Identify Data Model Number: ST3120026A Serial Number: xxxxxxxxxx Firmware Revision: 8.01 Default CHS: 16383-16-63 Current CHS: 16383-16-63 Current Capacity: 16514064 Sectors Total Capacity: 234441648 Sectors Conductor Cable Reported ID Method: CSEL SMART Check: Passed AtaCore Error 2 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData AtaCore Error 11 in SmartReadData Short Test Aborted by End User: 03-Dec-2005 16:08:56 ----------------------------------------------------------------- End results from Seagate's DiagATA/SCSI ATA Full Test Result: Failed Results from Seagate's DiagATA/SCSI: ----------------------------------------------------------------- DIAGATA.EXE Version 3.08.50328ML Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved. ----------------------------------------------------------------- Timer Resolution: 0.000122 Long Test Begin: 03-Dec-2005 16:09:56 Cable Test - 0 Errors Buffer Test - 0 Errors AtaCore Error 11 in Identify Long Test Failed: 03-Dec-2005 16:10:17 ----------------------------------------------------------------- End results from Seagate's DiagATA/SCSI File Structure Test Result: Partition 1 (NTFS (112.8 GB) DATI) Not Tested NOTE: Any report of possible errors in the file system tests are for informational purposes only. We suggest you should consider testing with the official file system diagnostic utilities for your operating system. Seagate is not able to assist with troubleshooting or reviewing file system test results. Partition 2 (Unknown (7.2 GB) No Name) Not Tested NOTE: Any report of possible errors in the file system tests are for informational purposes only. We suggest you should consider testing with the official file system diagnostic utilities for your operating system. Seagate is not able to assist with troubleshooting or reviewing file system test results. ****************************************** Recommendation: If you are not experiencing data loss and SeaTools reports File System Structure errors, they may be caused by a lock-up or failure to shutdown Windows correctly. Many times, these errors may be repaired through normal system maintenance which includes using the Windows provided "Defrag" and "Scandisk / Chkdsk / Error Checking" utilities. If you are experiencing a hardware error, you should isolate the cause and replace the failing component. If you are unsure how to proceed with repairs, contact a computer professional. After completing any maintenance tasks, run SeaTools again to verify that all errors have been repaired. If errors continue to occur, the system may not be stable. Again, contact a computer professional. If you have experienced a data loss, cease drive operation immediately. Professional data recovery service is the best option to recover your data. ======================================================== cosa mi consigliate di fare? ho provato col chkdisk di winxp ma nn sto riuscendo ad avviare il comando, con un floppy di boot posso farlo? ciauz |
|
|
|
03-12-2005, 22:37
|
#2 |
|
Senior Member
Iscritto dal: Nov 1999
Città: Pistoia
Messaggi: 37438
|
Formattazione a basso livello e se fallisce, restituzione in garanzia
|
|
|
|
|
04-12-2005, 08:26
|
#3 |
|
Senior Member
Iscritto dal: Oct 2001
Messaggi: 7906
|
anche se con lentezza sono riuscito a installare ubuntu sullo spazio non partizionato che avevo lasciato(benedetto il giorno in cui l'ho fatto) e ad accedere alla partizione principale del disco!
ora vedo di backuppare a manetta! ps W linux |
|
|
|
|
04-12-2005, 13:21
|
#4 |
|
Senior Member
Iscritto dal: Oct 2001
Messaggi: 7906
|
raga ma come cavolo è che con un raid(fake raid a dire il vero) su nforce4 nn riesco a fargli fare il chkdsk?
io metto il cd di xp, gli faccio caricare i driver raid, faccio partire la console di ripristino e mi dici "installazione non valida" scegliendo l'installazione del disco sul sistema raid dove sbaglio? c'è un altro metodo per farlo? |
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 02:11.
