[PD+SPED] ROUTER ISDN/ADSL CISCO 801/803/1601/1721/2610/2611 CCNA

blacktoffee · 21-10-2008, 17:12

Vendo i seguenti Router Cisco, testati uno ad uno, perfettamente funzionanti.

CISCO 801, ROUTER ISDN: [35 EURO]

TinyROM version 1.0(2)
Mon Nov 02 17:14:21 1998
Copyright (c) 1998 by cisco Systems, Inc.
All rights reserved.

POST ......... OK. 4MB DRAM, 8MB Flash.

Cisco C801 (MPC850) processor (revision 0) with 43384K bytes of virtual memory.
Processor board ID JAD03230537
CPU part number 0x2100
Bridging software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
4M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)

********************************************************************

CISCO 1601: [25 EURO]

System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1997 by cisco Systems, Inc.
C1600 processor with 2048 Kbytes of main memory

cisco 1601 (68360) processor (revision C) with 1536K/512K bytes of memory.
Processor board ID 10541789
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
1 Serial(sync/async) network interface.
System/IO memory with parity disabled
2048K bytes of DRAM onboard
System running from FLASH
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read ONLY)

********************************************************************

CISCO 1601 R: [15 EURO] *** MANCA ALIMENTATORE, E` CMQ IDENTICO AL CISCO 1601 ***
In alternativa vi faccio 15 euro il 1601 senza alimentatore e 25 euro questo 1601 R con l'alimentatore

System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C1600 platform with 8192 Kbytes of main memory

cisco 1601 (68360) processor (revision C) with 6587K/1605K bytes of memory.
Processor board ID 16996923, with hardware revision 00000002
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM
7K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)

********************************************************************

CISCO 2610: [50 EURO] *** MANCA FRONTALINO IN PLASTICA DAVANTI ***

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 24576 Kbytes of main memory

cisco 2610 (MPC860) processor (revision 0x203) with 20480K/4096K bytes of memory.
Processor board ID JAD0508184C (3175395392)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

********************************************************************

CISCO 2611: [80 EURO]

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory

cisco 2611 (MPC860) processor (revision 0x202) with 26624K/6144K bytes of memory.
Processor board ID JAB031408UA (1906906052)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

********************************************************************

ACCESSORI:

WIC-1T 1 Serial(sync/async) network interface(s)
WIC-2T 2 Serial(sync/async) network interface(s)
WIC-??? 4 ISDN Basic Rate interface(s)

********************************************************************

Per eventuali aggiornamenti firmware o configurazioni chiedete pure.

Spese di spedizione non incluse.
Foto su richiesta.

grey.fox · 21-10-2008, 21:28

Hai foto di cisco 803?

blacktoffee · 21-10-2008, 23:59

Quote:

Originariamente inviato da grey.fox

Hai foto di cisco 803?

Certamente, domani te le faccio e le posto qui.

blacktoffee · 22-10-2008, 11:32

Quote:

Originariamente inviato da blacktoffee

Certamente, domani te le faccio e le posto qui.

grey.fox · 22-10-2008, 16:52

ci sono firmware più aggiornati?

blacktoffee · 23-10-2008, 01:58

Quote:

Originariamente inviato da grey.fox

ci sono firmware più aggiornati?

Certo, ad esempio c'è il firmware: C800-K9osy6-Mw 123-3a.bin

blacktoffee · 23-10-2008, 12:21

up!

blacktoffee · 24-10-2008, 09:59

up!

blacktoffee · 25-10-2008, 11:18

up!

blacktoffee · 26-10-2008, 10:31

up!

blacktoffee · 27-10-2008, 14:37

up!

blacktoffee · 28-10-2008, 10:20

up!

blacktoffee · 30-10-2008, 10:10

up!

blacktoffee · 31-10-2008, 12:48

up!

riaw · 02-11-2008, 13:43

prezzi delle wic?

grey.fox · 02-11-2008, 15:29

Mio il Cisco 803.
Attendo pvt.

blacktoffee · 02-11-2008, 16:44

Quote:

Originariamente inviato da grey.fox

Mio il Cisco 803.
Attendo pvt.

Mandato PVT

blacktoffee · 03-11-2008, 17:51

up!

Danyit84 · 06-11-2008, 13:20

Mi servirebbero delle cose per l'827V4, alimentatore e cavo di gestione, posso offrirti alimentatore aps61es-30, fammi sapere...

blacktoffee · 10-11-2008, 21:03

Quote:

Originariamente inviato da Danyit84

Mi servirebbero delle cose per l'827V4, alimentatore e cavo di gestione, posso offrirti alimentatore aps61es-30, fammi sapere...

Ciao, purtroppo non ho nulla per l827V4..... intendevi qualcosa in particolare?

21-10-2008, 17:12	#1
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	[PD+SPED] ROUTER ISDN/ADSL CISCO 801/803/1601/1721/2610/2611 CCNA Vendo i seguenti Router Cisco, testati uno ad uno, perfettamente funzionanti. CISCO 801, ROUTER ISDN: [35 EURO] TinyROM version 1.0(2) Mon Nov 02 17:14:21 1998 Copyright (c) 1998 by cisco Systems, Inc. All rights reserved. POST ......... OK. 4MB DRAM, 8MB Flash. Cisco C801 (MPC850) processor (revision 0) with 43384K bytes of virtual memory. Processor board ID JAD03230537 CPU part number 0x2100 Bridging software. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 1 ISDN Basic Rate interface(s) 4M bytes of physical memory (DRAM) 8K bytes of non-volatile configuration memory 8M bytes of flash on board (4M from flash card) ****************************************************************** CISCO 1601: [25 EURO] System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Copyright (c) 1997 by cisco Systems, Inc. C1600 processor with 2048 Kbytes of main memory cisco 1601 (68360) processor (revision C) with 1536K/512K bytes of memory. Processor board ID 10541789 Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 1 Serial(sync/async) network interface. System/IO memory with parity disabled 2048K bytes of DRAM onboard System running from FLASH 8K bytes of non-volatile configuration memory. 4096K bytes of processor board PCMCIA flash (Read ONLY) **************************************************************** CISCO 1601 R: [15 EURO] * MANCA ALIMENTATORE, E` CMQ IDENTICO AL CISCO 1601 * In alternativa vi faccio 15 euro il 1601 senza alimentatore e 25 euro questo 1601 R con l'alimentatore System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C1600 platform with 8192 Kbytes of main memory cisco 1601 (68360) processor (revision C) with 6587K/1605K bytes of memory. Processor board ID 16996923, with hardware revision 00000002 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) System/IO memory with parity disabled 8192K bytes of DRAM onboard System running from RAM 7K bytes of non-volatile configuration memory. 4096K bytes of processor board PCMCIA flash (Read/Write) **************************************************************** CISCO 2610: [50 EURO] * MANCA FRONTALINO IN PLASTICA DAVANTI * System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 24576 Kbytes of main memory cisco 2610 (MPC860) processor (revision 0x203) with 20480K/4096K bytes of memory. Processor board ID JAD0508184C (3175395392) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) **************************************************************** CISCO 2611: [80 EURO] System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 32768 Kbytes of main memory cisco 2611 (MPC860) processor (revision 0x202) with 26624K/6144K bytes of memory. Processor board ID JAB031408UA (1906906052) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. 2 Ethernet/IEEE 802.3 interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) **************************************************************** ACCESSORI: WIC-1T 1 Serial(sync/async) network interface(s) WIC-2T 2 Serial(sync/async) network interface(s) WIC-??? 4 ISDN Basic Rate interface(s) **************************************************************** Per eventuali aggiornamenti firmware o configurazioni chiedete pure. Spese di spedizione non incluse. Foto su richiesta. __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU** Ultima modifica di blacktoffee : 10-11-2008 alle 21:53.

21-10-2008, 21:28	#2
grey.fox Senior Member Iscritto dal: Mar 2002 Città: Provincia di Rovigo Messaggi: 5256	Hai foto di cisco 803? __________________ Sharkoon Silentstorm CZ 750W - AMD Ryzen 7 5700X - ASRock Fatality B450 Gaming K4 - 16Gb HyperX Predator DDR4 3200 CL16 - Powercolor Red Devil RX6700XT - Crucial P5 NVMe - Acer EG240Y - Logitech G11 + G203 Prodigy - Optiarc AD-5240S - Win 11 Home

22-10-2008, 16:52	#5
grey.fox Senior Member Iscritto dal: Mar 2002 Città: Provincia di Rovigo Messaggi: 5256	ci sono firmware più aggiornati? __________________ Sharkoon Silentstorm CZ 750W - AMD Ryzen 7 5700X - ASRock Fatality B450 Gaming K4 - 16Gb HyperX Predator DDR4 3200 CL16 - Powercolor Red Devil RX6700XT - Crucial P5 NVMe - Acer EG240Y - Logitech G11 + G203 Prodigy - Optiarc AD-5240S - Win 11 Home

23-10-2008, 12:21	#7
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

24-10-2008, 09:59	#8
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

25-10-2008, 11:18	#9
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

26-10-2008, 10:31	#10
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

27-10-2008, 14:37	#11
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

28-10-2008, 10:20	#12
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

30-10-2008, 10:10	#13
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

31-10-2008, 12:48	#14
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

02-11-2008, 13:43	#15
riaw Senior Member Iscritto dal: Sep 2000 Città: lodi-crema-milano. Messaggi: 12337	prezzi delle wic? __________________ La teoria è quando si sa tutto e niente funziona. La pratica è quando tutto funziona e nessuno sa il perché. Noi abbiamo messo insieme la teoria e la pratica: non c'è niente che funzioni... e nessuno sa il perché!

02-11-2008, 15:29	#16
grey.fox Senior Member Iscritto dal: Mar 2002 Città: Provincia di Rovigo Messaggi: 5256	Mio il Cisco 803. Attendo pvt. __________________ Sharkoon Silentstorm CZ 750W - AMD Ryzen 7 5700X - ASRock Fatality B450 Gaming K4 - 16Gb HyperX Predator DDR4 3200 CL16 - Powercolor Red Devil RX6700XT - Crucial P5 NVMe - Acer EG240Y - Logitech G11 + G203 Prodigy - Optiarc AD-5240S - Win 11 Home

03-11-2008, 17:51	#18
blacktoffee Senior Member Iscritto dal: Mar 2008 Città: Padova Messaggi: 4489	up! __________________ VENDO: HUB_SWITCH \| STAMPANTI_LASER \| ALIMENTATORI \| CPU_370/SLOT1 \| ROUTER_CISCO \| PENTIUM_3 \| TEL. D'EPOCA \| MULTIFUNZIONE_LASER \| PENTIUM_4 \| CENTRAL_TEL. \| VECCHIE_CPU

06-11-2008, 13:20	#19
Danyit84 Senior Member Iscritto dal: Aug 2006 Messaggi: 595	Mi servirebbero delle cose per l'827V4, alimentatore e cavo di gestione, posso offrirti alimentatore aps61es-30, fammi sapere...

Strumenti
Mostra una versione stampabile Invia questa pagina per email