Torna indietro   Hardware Upgrade Forum > Software > Programmazione

Polestar 3 Performance, test drive: comodità e potenza possono convivere
Polestar 3 Performance, test drive: comodità e potenza possono convivere
Abbiamo passato diversi giorni alla guida di Polestar 3, usata in tutti i contesti. Come auto di tutti i giorni è comodissima, ma se si libera tutta la potenza è stupefacente
Qualcomm Snapdragon X2 Elite: l'architettura del SoC per i notebook del 2026
Qualcomm Snapdragon X2 Elite: l'architettura del SoC per i notebook del 2026
In occasione del proprio Architecture Deep Dive 2025 Qualcomm ha mostrato in dettaglio l'architettura della propria prossima generazione di SoC destinati ai notebook Windows for ARM di prossima generazione. Snapdragon X2 Elite si candida, con sistemi in commercio nella prima metà del 2026, a portare nuove soluzioni nel mondo dei notebook sottili con grande autonomia
Recensione DJI Mini 5 Pro: il drone C0 ultra-leggero con sensore da 1 pollice
Recensione DJI Mini 5 Pro: il drone C0 ultra-leggero con sensore da 1 pollice
DJI Mini 5 Pro porta nella serie Mini il primo sensore CMOS da 1 pollice, unendo qualità d'immagine professionale alla portabilità estrema tipica di tutti i prodotti della famiglia. È un drone C0, quindi in un peso estremamente contenuto e che non richiede patentino, propone un gimbal rotabile a 225 gradi, rilevamento ostacoli anche notturno e autonomia fino a 36 minuti. Caratteristiche che rendono il nuovo drone un riferimento per creator e appassionati
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 22-11-2012, 19:25   #1
strasy
Member
 
Iscritto dal: Dec 2005
Città: Sicilia
Messaggi: 63
[C] Costruire albero red-black

Salve a tutti,
sto studiando gli alberi red-black. Sulla teoria ci sono, ma nell'implementazione dei codici in linguaggio C mi sto un pò incartando.

Ho il codice per trovare la b-altezza di un albero. Ma prima devo avere il mio albero costruito con tutte le chiavi e colori al posto giusto. Come faccio a costruirlo? Cioè, se io ho un esempio di albero red-black, come posso costruire questo albero in linguaggio C?

Grazie!!
strasy è offline   Rispondi citando il messaggio o parte di esso
Old 23-11-2012, 13:13   #2
WarDuck
Senior Member
 
L'Avatar di WarDuck
 
Iscritto dal: May 2001
Messaggi: 12869
Devi procedere per passi.

Innanzitutto come rappresenti un albero vuoto.

Dopodiché come rappresenti un albero con un solo nodo, e di che colore è (la radice se non sbaglio deve essere di un determinato colore).

Ti consiglio di partire proprio dall'insert.
WarDuck è offline   Rispondi citando il messaggio o parte di esso
Old 23-11-2012, 14:12   #3
strasy
Member
 
Iscritto dal: Dec 2005
Città: Sicilia
Messaggi: 63
Allora, mi creo il nuovo tipo di dato per il colore del nodo:

typedef
enum {rosso,nero} tipo_colore;

poi mi creo la struttua per rappresentare un nodo:

typedef
struct nodo_rb
{
long chiave;
tipo_colore color;
struct nodo_rb *padre, *sinix, *dex;
}
tipo_nodorb;

e poi mi creo la struttua per rappresentare un albero:

typedef
struct albero_rb
{
tipo_nodorb *radice;
tipo_nodorb *nil;
}
tipo_alberorb;

adesso come faccio a costruire l'albero? ogni volta che inserisco un valore devo prestare attenzione a dove va inserito, al colore e a tutti i collegamenti (padre,sinistro e destro).
da dove devo iniziare?

ad esempio, se faccio:
int main()
{
int k;

printf("Inserisci la chiave di un nodo ");
scanf("%d", &k);
}

come faccio adesso a inserire il valore di k nella radice?e se poi faccio un ciclo, come faccio ogni volta che inserisco un nuovo valore a metterlo al posto giusto con tutti i collegamenti?

Ah, la radice deve essere di colore nero.
strasy è offline   Rispondi citando il messaggio o parte di esso
Old 23-11-2012, 20:07   #4
strasy
Member
 
Iscritto dal: Dec 2005
Città: Sicilia
Messaggi: 63
Sono riuscita a crearmi dei nodi e collegarli tra loro...ora devo assegnare al mio albero il primo nodo, così il mio albero viene riconosciuto dal puntatore al nodo radice (primo nodo)...solo che nn riesco ad effettuare questa assegnazione e non ne capisco il motivo. Riporto qui di seguito il mio codice:



#include <stdio.h>
#include <stdlib.h>

typedef
enum {rosso,nero} tipo_colore;

typedef
struct nodo_rb
{
int chiave;
tipo_colore color;
struct nodo_rb *padre, *sinix, *dex;
}
tipo_nodorb;

typedef
struct albero_rb
{
tipo_nodorb *radice;
tipo_nodorb *nil;
}
tipo_alberorb;

tipo_nodorb* crea_nodo(int val, tipo_colore col)
{
tipo_nodorb *punt;
punt = (tipo_nodorb *)malloc(sizeof(tipo_nodorb));
punt->chiave = val;
punt->color = col;
punt->padre = NULL;
punt->sinix = NULL;
punt->dex = NULL;
return punt;
}

tipo_nodorb* settings(tipo_nodorb *nodo, tipo_nodorb *sx, tipo_nodorb *dx, tipo_nodorb *px)
{
nodo->padre = px;
nodo->sinix = sx;
nodo->dex = dx;
return nodo;
}

int main()
{
tipo_nodorb *p1, *p2, *p3, *p4, *p5, *p6, *p7, *p8, *p9;

p1 = crea_nodo(21,nero);
p2 = crea_nodo(2,rosso);
p3 = crea_nodo(55,nero);
p4 = crea_nodo(1,nero);
p5 = crea_nodo(8,nero);
p6 = crea_nodo(34,rosso);
p7 = crea_nodo(89,rosso);
p8 = crea_nodo(5,rosso);
p9 = crea_nodo(13,rosso);

settings(p1,p2,p3,NULL);
settings(p2,p4,p5,p1);
settings(p3,p6,p7,p1);
settings(p4,NULL,NULL,p2);
settings(p5,p8,p9,p2);
settings(p6,NULL,NULL,p3);
settings(p7,NULL,NULL,p3);
settings(p8,NULL,NULL,p5);
settings(p9,NULL,NULL,p5);

printf("%d\t%d\t%d\t%d\t%d\n", p1->chiave, p1->color, p1->padre, p1->sinix->chiave, p1->dex->chiave);
printf("%d\t%d\t%d\t%d\t%d\n", p2->chiave, p2->color, p2->padre->chiave, p2->sinix->chiave, p2->dex->chiave);
printf("%d\t%d\t%d\t%d\t%d\n", p3->chiave, p3->color, p3->padre->chiave, p3->sinix->chiave, p3->dex->chiave);
printf("%d\t%d\t%d\t%d\t%d\n", p4->chiave, p4->color, p4->padre->chiave, p4->sinix, p4->dex);
printf("%d\t%d\t%d\t%d\t%d\n", p5->chiave, p5->color, p5->padre->chiave, p5->sinix->chiave, p5->dex->chiave);
printf("%d\t%d\t%d\t%d\t%d\n", p6->chiave, p6->color, p6->padre->chiave, p6->sinix, p6->dex);
printf("%d\t%d\t%d\t%d\t%d\n", p7->chiave, p7->color, p7->padre->chiave, p7->sinix, p7->dex);
printf("%d\t%d\t%d\t%d\t%d\n", p8->chiave, p8->color, p8->padre->chiave, p8->sinix, p8->dex);
printf("%d\t%d\t%d\t%d\t%d\n", p9->chiave, p9->color, p9->padre->chiave, p9->sinix, p9->dex);

return 0;
}



Ora se mi dichiaro

tipo_alberorb *b;

e poi assegno

b->radice = p1;

il programma non mi funziona più...perchè?
strasy è offline   Rispondi citando il messaggio o parte di esso
Old 24-11-2012, 17:20   #5
strasy
Member
 
Iscritto dal: Dec 2005
Città: Sicilia
Messaggi: 63
Ho risolto.
Al posto dell'operatore freccia (->) dovevo mettere l'operatore punto (.).
strasy è offline   Rispondi citando il messaggio o parte di esso
Old 24-11-2012, 21:34   #6
Vincenzo1968
Bannato
 
Iscritto dal: Mar 2008
Città: Villabate(PA)
Messaggi: 2515
Questa è l'implementazione dell'algoritmo descritto nel Cormen:



Codice:
#include <stdio.h>
#include <malloc.h>

#define MAX_STACK 100

//int MemoriaAllocata = 0;
//int MemoriaDeallocata = 0;

typedef struct tagTree
{
	int data;
	char color;
	struct tagTree *father;
	struct tagTree *left;
	struct tagTree *right;
} Tree;

Tree *pNil = NULL;

Tree *NewNode(int info);
Tree *InsertNode(Tree *node, int key);
void InsertFixup(Tree **head, Tree **z);
Tree *DeleteNode(Tree *root, Tree *z);
void DeleteFixup(Tree **head, Tree **x);
void FreeTree(Tree *head);

void InitNil(Tree **p);

Tree *TreeRotateLeft(Tree *head, Tree *node);
Tree *TreeRotateRight(Tree *head, Tree *node);
void TreeSuccessor(Tree *current, Tree **result);
void TreePredecessor(Tree *current, Tree **result);

void ReverseInOrder(Tree *head);
void InOrder(Tree *head);
void PreOrder(Tree *head);
void PostOrder(Tree *head);

void SearchFirst(Tree *head, Tree **result, int key);
void SearchNext(Tree *head, Tree **result, int key);
void TreeMinimum(Tree *head, Tree **result);
void TreeMaximum(Tree *head, Tree **result);

int TreeSize(Tree *head);
int TreeDepth(Tree *head);

void InitNil(Tree **p)
{
	*p = NewNode(0);
	if ( *p )
	{
		(*p)->data = 0;
		(*p)->color = 'b';
		(*p)->left = NULL;
		(*p)->right = NULL;
		(*p)->father = NULL;
	}
	else
	{
		printf("Errore nell'inizializzazione di pNil.\n");
	}
}

Tree *NewNode(int info)
{
	Tree *r;

	r = (Tree *) malloc(sizeof(Tree));

	if( !r )
	{
		printf("Memoria insufficiente.\n");
		return pNil;
	}

	//MemoriaAllocata += sizeof(Tree);

	r->data = info;
	r->color = 'b'; // 'b' = Black; 'r' = Red
	r->father = pNil;
	r->left = pNil;
	r->right = pNil;

	return r;
}

Tree *InsertNode(Tree *node, int key)
{
	Tree *z = pNil;
	Tree *y = pNil;
	Tree *pRadice = pNil;

	z = NewNode(key);
	if ( z == pNil )
		return pNil;

	pRadice = node;

	while ( pRadice != pNil )
	{
		y = pRadice;
		if ( z->data < pRadice->data )
			pRadice = pRadice->left;
		else
			pRadice = pRadice->right;
	}

	z->father = y;
	if ( y == pNil )
	{
		printf("Inserisco la radice -> %d\n", key);

		node = z;
	}
	else
	{
		if ( z->data < y->data )
		{
			printf("Inserisco %d a sinistra di %d\n", z->data, y->data);

			y->left = z;
		}
		else
		{
			printf("Inserisco %d a destra di %d\n", z->data, y->data);

			y->right = z;
		}
	}

	z->left = pNil;
	z->right = pNil;
	z->color = 'r'; // Red

	InsertFixup(&node, &z);

	return node;
}

void InsertFixup(Tree **head, Tree **z)
{
	Tree *y = pNil;

	while ( (*z)->father->color == 'r' )
	{
		if ( (*z)->father == (*z)->father->father->left )
		{
			y = (*z)->father->father->right;
			if ( y->color == 'r' )
			{
				(*z)->father->color = 'b';
				y->color = 'b';
				(*z)->father->father->color = 'r';
				*z = (*z)->father->father;
			}
			else 
			{
				if ( *z == (*z)->father->right )
				{
					*z = (*z)->father;
					*head = TreeRotateLeft(*head, *z);
				}
				(*z)->father->color = 'b';
				(*z)->father->father->color = 'r';
				*head = TreeRotateRight(*head, (*z)->father->father);
			}
		}
		else
		{
			y = (*z)->father->father->left;
			if ( y->color == 'r' )
			{
				(*z)->father->color = 'b';
				y->color = 'b';
				(*z)->father->father->color = 'r';
				*z = (*z)->father->father;
			}
			else 
			{
				if ( *z == (*z)->father->left )
				{
					*z = (*z)->father;
					*head = TreeRotateRight(*head, *z);
				}
				(*z)->father->color = 'b';
				(*z)->father->father->color = 'r';
				*head = TreeRotateLeft(*head, (*z)->father->father);
			}
		}
	}

	(*head)->color = 'b';
}

Tree *DeleteNode(Tree *root, Tree *z)
{
	Tree *y = pNil;
	Tree *x = pNil;

	if ( root == pNil || z == pNil )
		return root;

	if ( z->left == pNil || z->right == pNil )
		y = z;
	else
		TreeSuccessor(z, &y);

	if ( y->left != pNil )
		x = y->left;
	else
		x = y->right;

	x->father = y->father;

	if ( y->father == pNil )
	{
		root = x;
	}
	else
	{
		if ( y == y->father->left )
			y->father->left = x;
		else
			y->father->right = x;
	}

	if ( y != z )
		z->data = y->data;

	if ( y->color == 'b' )
		DeleteFixup(&root, &x);

	free(y);
	//MemoriaDeallocata += sizeof(Tree);

	return root;
}

void DeleteFixup(Tree **head, Tree **x)
{
	Tree *w = pNil;

	while ( *x != *head && (*x)->color == 'b' )
	{
		if ( *x == (*x)->father->left )
		{
			w = (*x)->father->right;
			if ( w->color == 'r' )
			{
				w->color = 'b';
				(*x)->father->color = 'r';
				*head = TreeRotateLeft(*head, (*x)->father);
				w = (*x)->father->right;
			}

			if ( w->left->color == 'b' && w->right->color == 'b' )
			{
				w->color = 'r';
				(*x) = (*x)->father;
			}
			else
			{
				if ( w->right->color == 'b' )
				{
					w->left->color = 'b';
					w->color = 'r';
					*head = TreeRotateRight(*head, w);
					w = (*x)->father->right;
				}

				w->color = (*x)->father->color;
				(*x)->father->color = 'b';
				w->right->color = 'b';
				*head = TreeRotateLeft(*head, (*x)->father);
				*x = *head;
			}
		}
		else
		{
			w = (*x)->father->left;
			if ( w->color == 'r' )
			{
				w->color = 'b';
				(*x)->father->color = 'r';
				*head = TreeRotateRight(*head, (*x)->father);
				w = (*x)->father->left;
			}

			if ( w->right->color == 'b' && w->left->color == 'b' )
			{
				w->color = 'r';
				(*x) = (*x)->father;
			}
			else
			{
				if ( w->left->color == 'b' )
				{
					w->right->color = 'b';
					w->color = 'r';
					*head = TreeRotateLeft(*head, w);
					w = (*x)->father->left;
				}

				w->color = (*x)->father->color;
				(*x)->father->color = 'b';
				w->left->color = 'b';
				*head = TreeRotateRight(*head, (*x)->father);
				*x = *head;
			}
		}
	}

	(*x)->color = 'b';
}

void FreeTree(Tree *head)
{
	Tree *temp1, *temp2;

	Tree *stack[MAX_STACK];
	int top;

	top = 0;
 
	if ( head == pNil )
		return;

	temp1 = temp2 = head;

	while ( temp1 != pNil )
	{
		for(; temp1->left != pNil; temp1 = temp1->left)
			stack[top++] = temp1;

		while ( (temp1 != pNil) && (temp1->right == pNil || temp1->right == temp2) )
		{
			temp2 = temp1;
			free(temp2);
			//MemoriaDeallocata += sizeof(Tree);
			if ( top == 0 )
				return;
			temp1 = stack[--top];
		}

		stack[top++] = temp1;
		temp1 = temp1->right;
	}
}

Tree *TreeRotateLeft(Tree *head, Tree *node)
{
	Tree *y;

	if ( head == pNil || node == pNil )
		return head;

	if ( node->right == pNil )
		return head;

	y = node->right;
	node->right = y->left;

	if ( y->left != pNil )
	{
		y->left->father = node;
	}

	y->father = node->father;

	if ( node->father == pNil )
	{
		head = y;
	}
	else
	{
		if ( node == node->father->left )
		{
			node->father->left = y;
		}
		else
		{
			node->father->right = y;
		}
	}

	y->left = node;
	node->father = y;

	return head;
}

Tree *TreeRotateRight(Tree *head, Tree *node)
{
	Tree *y;

	if ( head == pNil || node == pNil )
		return head;

	if ( node->left == pNil )
		return head;

	y = node->left;
	node->left = y->right;

	if ( y->right != pNil )
	{
		y->right->father = node;
	}

	y->father = node->father;

	if ( node->father == pNil )
	{
		head = y;
	}
	else
	{
		if ( node == node->father->right )
		{
			node->father->right = y;
		}
		else
		{
			node->father->left = y;
		}
	}

	y->right = node;
	node->father = y;

	return head;
}

void TreeSuccessor(Tree *current, Tree **result)
{
	Tree *nodo = current;

	*result = pNil;

	if ( nodo == pNil )
		return;

	if ( nodo->right != pNil )
	{
		nodo = nodo->right;
		while ( nodo != pNil )
		{
			*result = nodo;
			nodo = nodo->left;
		}
	}
	else
	{
		*result = nodo->father;
		while ( *result != pNil && nodo == (*result)->right )
		{
			nodo = *result;
			*result = (*result)->father;
		}
	}
}

void TreePredecessor(Tree *current, Tree **result)
{
	Tree *nodo = current;

	*result = pNil;

	if ( nodo == pNil )
		return;

	if ( nodo->left != pNil )
	{
		nodo = nodo->left;
		while ( nodo != pNil )
		{
			*result = nodo;
			nodo = nodo->right;
		}
	}
	else
	{
		*result = nodo->father;
		while ( *result != NULL && nodo == (*result)->left )
		{
			nodo = *result;
			*result = (*result)->father;
		}
	}
}

void ReverseInOrder(Tree *head)
{
	Tree *temp;

	Tree *stack[MAX_STACK];
	int top;
	top = -1;

	if ( head == pNil )
		return;

	temp = head;

	while ( 1 )
	{
		if ( temp != pNil )
		{
			if ( top < MAX_STACK ) 
			{
				stack[++top] = temp; // Push
				temp = temp->right;
			}
			else
			{
				printf("Errore: lo stack e' pieno.\n");
				return;
			}
		}
		else
		{
			if ( top >= 0 )
			{
				temp = stack[top--]; // Pop 
				printf("%d\n", temp->data);			
				temp = temp->left;
			}
			else
			{
				break;
			}
		}
	}
}

void InOrder(Tree *head)
{
	Tree *temp;

	Tree *stack[MAX_STACK];
	int top;
	top = -1;

	if ( head == pNil )
		return;

	temp = head;

	while ( 1 )
	{
		if ( temp != pNil )
		{
			if ( top < MAX_STACK ) 
			{
				stack[++top] = temp; // Push
				temp = temp->left;
			}
			else
			{
				printf("Errore: lo stack e' pieno.\n");
				return;
			}
		}
		else
		{
			if ( top >= 0 )
			{
				temp = stack[top--]; // Pop 
				printf("%d\n", temp->data);			
				temp = temp->right;
			}
			else
			{
				break;
			}
		}
	}
}

void PreOrder(Tree *head)
{
	Tree *temp;

	Tree *stack[MAX_STACK];
	int top;
	top = 0;

	if ( head == pNil )
		return;

	temp = head;

	stack[top++] = temp; // Push

	while ( top != 0 )
	{
		temp = stack[--top]; // Pop

		printf("%d\n", temp->data);

		if ( temp->right != pNil )
			stack[top++] = temp->right;
		if ( temp->left != pNil )
			stack[top++] = temp->left;
	} 
}

void PostOrder(Tree *head)
{
	Tree *temp1, *temp2;

	Tree *stack[MAX_STACK];
	int top;

	top = 0;
 
	if ( head == pNil )
		return;

	temp1 = temp2 = head;

	while ( temp1 != pNil )
	{
		for(; temp1->left != pNil; temp1 = temp1->left)
			stack[top++] = temp1; // Push

		while ( (temp1 != pNil) && (temp1->right == pNil || temp1->right == temp2) )
		{
			printf("%d\n", temp1->data);
			temp2 = temp1;
			if ( top == 0 )
				return;
			temp1 = stack[--top]; // Pop
		}

		stack[top++] = temp1; // Push
		temp1 = temp1->right;
	}
}

void SearchFirst(Tree *head, Tree **result, int key)
{
	Tree *node;

	*result = pNil;
	node = head;

	if ( head == pNil )
		return;

	while( 1 )
	{
		if ( key < node->data )
		{
			if ( node->left == pNil )
				break;
			node = node->left;
		}
		else if ( key > node->data )
		{
			if ( node->right == pNil )
				break;
			node = node->right;
		}
		else // key == node->data
		{
			*result = node;
			break;
		}
	}
}

void SearchNext(Tree *head, Tree **result, int key)
{
	Tree *node;

	*result = pNil;

	if ( head == pNil )
		return;

	node = head->right;
	if ( node == pNil )
		return;

	while( 1 )
	{
		if ( key < node->data )
		{
			if ( node->left == pNil )
				break;
			node = node->left;
		}
		else if ( key > node->data )
		{
			if ( node->right == pNil )
				break;
			node = node->right;
		}
		else // key == node->data
		{
			*result = node;
			break;
		}
	}
}

void TreeMinimum(Tree *head, Tree **result)
{
	Tree *nodo = head;

	*result = pNil;

	if ( nodo == pNil )
		return;

	*result = nodo;

	while ( nodo != pNil )
	{
		*result = nodo;
		nodo = nodo->left;
	}
}

void TreeMaximum(Tree *head, Tree **result)
{
	Tree *nodo = head;

	*result = pNil;

	if ( nodo == pNil )
		return;

	*result = nodo;

	while ( nodo != pNil )
	{
		*result = nodo;
		nodo = nodo->right;
	}
}

int TreeSize(Tree *head)
{
	Tree *temp;
	int sizeLeft, sizeRight;

	Tree *stack[MAX_STACK];
	int top;
	top = -1;

	if ( !head )
		return 0;

	sizeLeft = sizeRight = 0;

	temp = head;

	while ( 1 )
	{
		if ( temp != pNil )
		{
			if ( top < MAX_STACK ) 
			{
				stack[++top] = temp; // Push
				temp = temp->left;
			}
			else
			{
				printf("Errore: lo stack e' pieno.\n");
				return - 1;
			}
		}
		else
		{
			if ( top >= 0 )
			{
				temp = stack[top--]; // Pop 
				if ( temp->data < head->data )
				{
					++sizeLeft;
				}
				else 
				{
					++sizeRight;
				}
				temp = temp->right;
			}
			else
			{
				break;
			}
		}
	}

	//return (sizeLeft + sizeRight + 1);
	return (sizeLeft + sizeRight);
}

int TreeDepth(Tree *head)
{
	Tree *temp1, *temp2;

	int Conta;

	Tree *stack[MAX_STACK];
	int top;

	top = 0;
	Conta = 0;
 
	if ( head == pNil )
	{
		return -1;
	}

	temp1 = temp2 = head;

	while ( temp1 != pNil )
	{
		for(; temp1->left != pNil; temp1 = temp1->left)
		{
			stack[top++] = temp1;
			if ( Conta < top )
				Conta++;
		}

		while ( (temp1 != pNil) && (temp1->right == pNil || temp1->right == temp2) )
		{
			temp2 = temp1;
			if ( top == 0 )
				//return Conta + 1;
				return Conta;
			temp1 = stack[--top];
		}

		stack[top++] = temp1;
		temp1 = temp1->right;
		if ( Conta < top )
			Conta = top;
	}

	//return Conta + 1;
	return Conta + 1;
}

int main()
{
	int k;
	int SearchKey;

	int size;

	int depth;

	Tree *pSearch = NULL;
	Tree *pSuccessor = NULL;
	Tree *pPredecessor = NULL;
	Tree *pTree = NULL;

	InitNil(&pNil);


	pTree = pNil;
	pSearch = pNil;
	pSuccessor = pNil;
	pPredecessor = pNil;

	/*
	pTree = InsertNode(pTree, 21);
	pTree = InsertNode(pTree, 8);
	pTree = InsertNode(pTree, 34);
	pTree = InsertNode(pTree, 55);
	pTree = InsertNode(pTree, 3);
	pTree = InsertNode(pTree, 89);
	pTree = InsertNode(pTree, 5);
	pTree = InsertNode(pTree, 71);
	pTree = InsertNode(pTree, 96);
	*/

	/*
	pTree = InsertNode(pTree, 5);
	pTree = InsertNode(pTree, 4);
	pTree = InsertNode(pTree, 3);
	pTree = InsertNode(pTree, 8);
	pTree = InsertNode(pTree, 34);
	pTree = InsertNode(pTree, 21);
	pTree = InsertNode(pTree, 89);
	//pTree = InsertNode(pTree, 8);
	//pTree = InsertNode(pTree, 8);
	pTree = InsertNode(pTree, 55);
	//pTree = InsertNode(pTree, 8);
	*/

	pTree = InsertNode(pTree, 47);
	pTree = InsertNode(pTree, 59);
	pTree = InsertNode(pTree, 13);
	pTree = InsertNode(pTree, 14);
	pTree = InsertNode(pTree, 15);

	pTree = InsertNode(pTree, 5);
	pTree = InsertNode(pTree, 4);
	pTree = InsertNode(pTree, 3);
	pTree = InsertNode(pTree, 8);
	pTree = InsertNode(pTree, 34);
	pTree = InsertNode(pTree, 21);
	pTree = InsertNode(pTree, 89);
	//pTree = InsertNode(pTree, 8);
	//pTree = InsertNode(pTree, 8);
	pTree = InsertNode(pTree, 55);
	//pTree = InsertNode(pTree, 8);

	pTree = InsertNode(pTree, 27);
	pTree = InsertNode(pTree, 101);
	pTree = InsertNode(pTree, 36);
	pTree = InsertNode(pTree, 102);
	pTree = InsertNode(pTree, 2);

	printf("\nstampa in ordine crescente(inorder):\n");
	InOrder(pTree);

	printf("\nstampa in PreOrder:\n");
	PreOrder(pTree);

	printf("\nstampa in PostOrder:\n");
	PostOrder(pTree);

	printf("\nstampa in ordine decrescente:\n");
	ReverseInOrder(pTree);

	size = TreeSize(pTree);
	printf("\nLa dimensione dell'albero e' -> %d\n", size);

	depth = TreeDepth(pTree);
	printf("\nL'altezza dell'albero e' -> %d\n", depth);


	/*
	printf("\nIl valore della radice, prima della cancellazione e' -> %d\n", pTree->data);
	SearchKey = 21;
	//SearchKey = 5;
	SearchFirst(pTree, &pSearch, SearchKey);
	if ( pSearch != pNil )
	{
		pTree = DeleteNode(pTree, pSearch);
		printf("\nIl valore della radice, dopo la cancellazione e' -> %d\n", pTree->data);
	}
	*/

	//depth = RecursiveTreeDepth(pTree);
	//printf("\nL'altezza dell'albero e' -> %d\n", depth);

	k = -1;
	SearchKey = 8;
	SearchFirst(pTree, &pSearch, SearchKey);
	if ( pSearch != pNil )
		++k;
	while ( pSearch != pNil )
	{
		SearchNext(pSearch, &pSearch, SearchKey);
		++k;
	}
	if ( k < 0)
		k = 0;
	printf("\nTrovate %d occorrenze della chiave %d\n", k, SearchKey);


	pSearch = pNil;
	TreeMinimum(pTree, &pSearch);
	if ( pSearch )
		printf("\nIl valore minimo e' uguale a %d\n", pSearch->data);

	/*
	if ( pSearch->father != pNil )
		printf("\nIl padre del nodo con chiave %d e' il nodo con chiave %d\n", pSearch->data, pSearch->father->data);
	else
		printf("\nIl nodo con chiave %d non ha padre.\n", pSearch->data);
	*/

	pPredecessor = pNil;
	TreePredecessor(pSearch, &pPredecessor);
	if ( pPredecessor != pNil )
		printf("\nIl predecessore del nodo con chiave %d, e' il nodo con chiave %d\n", pSearch->data, pPredecessor->data);
	else
		printf("\nIl nodo con chiave %d non ha predecessore.\n", pSearch->data);

	pSuccessor = pNil;
	TreeSuccessor(pSearch, &pSuccessor);
	if ( pSuccessor != pNil )
		printf("\nIl successore del nodo con chiave %d, e' il nodo con chiave %d\n", pSearch->data, pSuccessor->data);
	else
		printf("\nIl nodo con chiave %d non ha successore.\n", pSearch->data);

	pSearch = pNil;
	TreeMaximum(pTree, &pSearch);
	if ( pSearch )
		printf("\nIl valore massimo e' uguale a %d\n", pSearch->data);

	/*
	if ( pSearch->father != pNil )
		printf("\nIl padre del nodo con chiave %d e' il nodo con chiave %d\n", pSearch->data, pSearch->father->data);
	else
		printf("\nIl nodo con chiave %d non ha padre.\n", pSearch->data);
	*/

	pPredecessor = pNil;
	TreePredecessor(pSearch, &pPredecessor);
	if ( pPredecessor != pNil )
		printf("\nIl predecessore del nodo con chiave %d, e' il nodo con chiave %d\n", pSearch->data, pPredecessor->data);
	else
		printf("\nIl nodo con chiave %d non ha predecessore.\n", pSearch->data);

	pSuccessor = pNil;
	TreeSuccessor(pSearch, &pSuccessor);
	if ( pSuccessor != pNil )
		printf("\nIl successore del nodo con chiave %d, e' il nodo con chiave %d\n", pSearch->data, pSuccessor->data);
	else
		printf("\nIl nodo con chiave %d non ha successore.\n", pSearch->data);

	/*
	SearchKey = 89;
	pSearch = pNil;
	SearchFirst(pTree, &pSearch, SearchKey);
	pTree = DeleteNode(pTree, pSearch);
	printf("\nstampa in ordine crescente dopo la cancellazione del nodo con chiave %d :\n", SearchKey);
	InOrder(pTree);
	*/

	/*
	SearchKey = 5;
	pSearch = pNil;
	SearchFirst(pTree, &pSearch, SearchKey);
	pTree = DeleteNode(pTree, pSearch);
	printf("\nstampa in ordine crescente dopo la cancellazione del nodo con chiave %d :\n", SearchKey);
	InOrder(pTree);
	*/


	/*
	SearchKey = 5;
	pSearch = pNil;
	SearchFirst(pTree, &pSearch, SearchKey);

	if ( pSearch != pNil )
	{
		printf("\nIl valore della radice, prima della rotazione a sinistra, e' -> %d\n", pTree->data);

		printf("\nRotazione a sinistra del nodo con chiave %d\n", pSearch->data);
		pTree = TreeRotateLeft(pTree, pSearch);

		printf("Il valore della radice, dopo la rotazione a sinistra, e' -> %d\n", pTree->data);
		printf("Cancellazione della radice %d\n", pTree->data);
		pTree = DeleteNode(pTree, pTree);
	}
	*/

	/*
	if ( pSearch != pNil )
		printf("\nIl valore della radice, prima della rotazione a destra, e' -> %d\n", pTree->data);

	printf("\nRotazione a destra del nodo con chiave %d\n", pSearch->data);
	pTree = TreeRotateRight(pTree, pSearch);

	if ( pSearch != pNil )
		printf("\nIl valore della radice, dopo la rotazione destra, e' -> %d\n", pTree->data);
	*/

	SearchKey = 55;
	pSearch = pNil;
	SearchFirst(pTree, &pSearch, SearchKey);

	if ( pSearch != pNil )
	{
		printf("\nIl valore della radice, prima della cancellazione, e' -> %d\n", pTree->data);

		printf("Cancellazione della radice %d\n", pTree->data);
		pTree = DeleteNode(pTree, pTree);

		//printf("Cancellazione del nodo %d\n", pSearch->data);
		//pTree = DeleteNode(pTree, pSearch);

		printf("\nIl valore della radice, dopo la cancellazione, e' -> %d\n", pTree->data);
	}


	size = TreeSize(pTree);
	printf("\nLa dimensione dell'albero, dopo le operazioni precedenti, e' -> %d\n", size);

	depth = TreeDepth(pTree);
	printf("\nL'altezza dell'albero, dopo le operazioni precedenti, e' -> %d\n", depth);

	//depth = RecursiveTreeDepth(pTree);
	//printf("\nLa profondita' dell'albero, dopo la rotazione a sinistra, e' -> %d\n", depth);

	printf("\nstampa in ordine crescente(inorder):\n");
	InOrder(pTree);

	FreeTree(pTree);
	FreeTree(pNil);

	//printf("\nMemoria allocata   : %d\nMemoria deallocata : %d\n\n", MemoriaAllocata, MemoriaDeallocata);

	return 0;
}

Ultima modifica di Vincenzo1968 : 24-11-2012 alle 21:43. Motivo: Aggiornato link
Vincenzo1968 è offline   Rispondi citando il messaggio o parte di esso
Old 25-11-2012, 09:52   #7
strasy
Member
 
Iscritto dal: Dec 2005
Città: Sicilia
Messaggi: 63
Grazie per il tuo aiuto.

A me comunque interessava solo la parte in cui bisognava inserire le chiavi dei nodi e tutte le loro info (colore, padre, sinistro e destro)...e poi la parte dei collegamenti tra i nodi...in modo da costruire un albero di base su cui provare le funzioni di inserimento di un nodo, rotazione, rimozione, ecc.

Ma ovviamente non potevo provare le funzioni senza un albero di base costruito...ecco il mio obiettivo.

Non esiste un modo per costruire un albero senza dover inserire le chiavi e i colori all'interno della funzione main(), ma inserendoli di volta in volta durante l'esecuzione del programma? si dovrebbero fare dei cicli...sull'allocazione della memoria dei nodi ci sono, ma mi viene difficile collegare i nodi tra loro...poichè come indico ad esempio il nodo padre?

Comunque, per il momento sono riuscita a provare le mie funzioni...
strasy è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


Polestar 3 Performance, test drive: comodità e potenza possono convivere Polestar 3 Performance, test drive: comodit&agra...
Qualcomm Snapdragon X2 Elite: l'architettura del SoC per i notebook del 2026 Qualcomm Snapdragon X2 Elite: l'architettura del...
Recensione DJI Mini 5 Pro: il drone C0 ultra-leggero con sensore da 1 pollice Recensione DJI Mini 5 Pro: il drone C0 ultra-leg...
ASUS Expertbook PM3: il notebook robusto per le aziende ASUS Expertbook PM3: il notebook robusto per le ...
Test ride con Gowow Ori: elettrico e off-road vanno incredibilmente d'accordo Test ride con Gowow Ori: elettrico e off-road va...
Son quasi regalate: 135€ per le Squier b...
Windows 11: il copia-incolla via IA funz...
La scopa elettrica Mova K30 Mix crolla a...
Violazione in Almaviva, fornitore IT di ...
Amazon avvia un investimento da 3 miliar...
Ci fai tutto e ci giochi bene: a 999€ po...
Snapdragon o Exynos? Un sondaggio svela ...
TP-Link porta Netgear in tribunale: camp...
2 portatili tuttofare a 499€: uno ha 32G...
HONOR prepara il suo top di gamma compat...
Sony WH-1000XM6 a un prezzo senza preced...
Borderlands 4: 2K Games rende gratis il ...
I 7 robot aspirapolvere più venduti del ...
Samsung Galaxy S26: il salto generaziona...
Caso Lo Wen-jen: Intel nega qualsiasi ut...
Chromium
GPU-Z
OCCT
LibreOffice Portable
Opera One Portable
Opera One 106
CCleaner Portable
CCleaner Standard
Cpu-Z
Driver NVIDIA GeForce 546.65 WHQL
SmartFTP
Trillian
Google Chrome Portable
Google Chrome 120
VirtualBox
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 10:14.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Served by www3v