NTLDR Mancante

[Swos]

CDT, ma che cosa puo' essere?

quando accendo il pc mi spunta questo da dos!(è abb. vekkio il pc)

come potrei risolvere?


grazie

[Cimmo]

Originariamente inviato da Swos
CDT, ma che cosa puo' essere?

quando accendo il pc mi spunta questo da dos!(è abb. vekkio il pc)

come potrei risolvere?


grazie

Hai un dischetto o un cd inserito?

[Swos]

disketto no, cd di winXP si, ma ero riuscito a formattare....

uhm.. se mi dici cosi' potrebbe essere il floppy sfottuto?

[Swos]

pero' ora mi esce:


Couldn't Open drive multi(0)disk(0)rdisk(0)partition(1)
NTLDR: impossibile aprire l'unità multi(0)disk(0)rdisk(o)partition(1)


:|

[Cimmo]

Originariamente inviato da Swos
disketto no, cd di winXP si, ma ero riuscito a formattare....

uhm.. se mi dici cosi' potrebbe essere il floppy sfottuto?

No, e' la cosa + banale cioe' quando lasci un dischetto inserito o un cd e fai il boot da cd o da A:, ma se non si accende neanche senza niente inserito e se nel bios come boot sequence c'e' anche c: allora il problema e' altrove...

[Swos]

sicuramente è un fatto hardware nn software :\

[Cimmo]

Originariamente inviato da Swos
sicuramente è un fatto hardware nn software :\

Non ne sarei cosi' sicuro, potrebbe essere l'so che si e' fottuto o l'hard disk...

prova a fare il boot da cd, scegli ripara inst., console e poi digiti fixmbr c:

[Swos]

xo' l'HD riesco a formattarlo.... tranquillamente :\

[Cimmo]

Originariamente inviato da Swos
xo' l'HD riesco a formattarlo.... tranquillamente :\

Ma hai provato a reinstallare l'so?

[Swos]

i file li copia, poi al riavvio quando dovrebbe ripartire l'installazione vera e propria nn va, rimane un trattino in alto a sinistra lampeggiante :\

[Cimmo]

Originariamente inviato da Swos
i file li copia, poi al riavvio quando dovrebbe ripartire l'installazione vera e propria nn va, rimane un trattino in alto a sinistra lampeggiante :\

mmm allora mi puzza di hdd fottuto...hai fatto la formattazione lenta e non quella rapida? L'installazione non dice che ci sono dei settori danneggiati?

[avvelenato]

tratto da http://www.computerhope.com/issues/ch000465.htm :



REFERENCE NUMBER: CH000465

NTLDR is Missing:

Issue:

NTLDR is Missing.

Related errors:

Below are the full error messages that may be seen when the computer is booting.

NTLDR is Missing
Press any key to restart

Boot: Couldn't find NTLDR
Please insert another disk

Additional Information:

See our NTLDR dictionary definition for a complete definition on this term.

Cause:

1. Computer is booting from a non-bootable source.
2. Computer hard disk drive is not properly setup in BIOS.
3. Corrupt NTLDR and/or NTDETECT.COM file.
4. Misconfiguration with the boot.ini file.
5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
6. New hard disk drive being added.
7. Seriously corrupted version of Windows 2000 or Windows XP.
8. Loose or Faulty IDE/EIDE hard disk drive cable.

Solutions:

Computer is booting from a non-bootable source

Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette is in the computer, unless you are attempting to boot from a diskette.

If you are attempting to boot from a floppy diskette and are receiving this error message it is likely that the diskette does not have all the necessary files and/or is corrupt.

If you are attempting to install Windows XP or Windows 2000 and are receiving this error message as the computer is booting verify that your computer BIOS has the proper boot settings. For example, if you are attempting to run the install from the CD-ROM make sure the CD-ROM is the first boot device, and not the hard disk drive. Second, when the computer is booting you should receive the below prompt.

Press any key to boot from the CD

When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again.

Note: If you are not receiving the above message and your BIOS boot options are set properly it's also possible that your CD-ROM drive may not be booting from the CD-ROM properly. Verify the jumpers are set properly on the CD-ROM drive. Additional information about checking the CD-ROM drive connections can be found on document CH000213.

Computer hard disk drive is not properly setup in BIOS.

Verify that your computer hard disk drive is properly setup in the BIOS / CMOS setup. Improper settings can cause this error. Additional information on how to enter the BIOS / CMOS setup can be found in document CH000192.

Corrupt NTLDR and/or NTDETECT.COM file

Windows 2000 users
Windows XP users

Windows 2000 users

If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error. Create the below boot.ini file on the floppy diskette drive.

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect

Copy the NTLDR and NTDETECT.COM files from another computer using the same Operating System. Both of these files are located in the root directory of the primary hard disk drive. For example C:\NTLDR and C:\NTDETECT.COM should be the locations of these files on many computers.

* Please keep in mind that these files are hidden system files, if you need additional help with viewing hidden files in Windows please see document CH000516.

Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive. Below is an example of what commonly should be performed from the A:\> drive.

copy ntldr c:
copy ntdetect.com c:

After the above two files have been copied, remove the floppy diskette and reboot the computer.

Windows XP users

1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.
3. Once in the Windows XP setup menu press the "R" key to repair Windows.
4. Log into your Windows installation by pressing the "1" key and pressing enter.
5. You will then be prompted for your administrator password, enter that password.
6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter "E". This letter may be different on your computer.

copy e:\i386\ntldr c:
copy ntdetect.com c:

7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.

Misconfiguration with the boot.ini file

Edit the boot.ini on the root directory of the hard disk drive and verify that it is pointing to the correct location of your Windows Operating System and that the partitions are properly defined. Additional information about the boot.ini can be found on document CH000492.

Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32

If you are getting this error message while you are attempting to upgrade to Windows 2000 or Windows XP from Windows 95, Windows 98, or Windows ME running FAT32 please try the following recommendations.

1. Boot the computer with a Windows 95, Windows 98 or Windows ME bootable diskette.
2. At the A:\> prompt type:

sys c: <press enter>

3. After pressing enter you should receive the "System Transferred" message. Once this has been completed remove the floppy diskette and reboot the computer.

New hard disk drive being added

If you are attempting to add a new hard disk drive to the computer make sure that drive is a blank drive. Adding a new hard disk drive to a computer that already has Windows installed on it may cause the NTLDR error to occur.

If you are unsure if the new drive is blank or not try booting from a bootable diskette and format the new hard disk drive.

Seriously corrupted version of Windows 2000 or Windows XP

If you have tried each of the above recommendations that apply to your situation and you continue to experience this issue it is possible you may have a seriously corrupted version of Microsoft Windows. Therefore we would recommend you reinstall Microsoft Windows 2000 and Windows XP.

If you are encountering this issue during your setup you may wish to completely erase your computer hard disk drive and all of its existing data and then install Microsoft Windows 2000 / Windows XP.

Loose or Faulty IDE/EIDE hard disk drive cable

This issue has been known to be caused by a loose or fault IDE/EIDE cable. If the above recommendation does not resolve your issue and your computer hard disk drive is using a IDE or EIDE interface. Verify the computer hard disk drive cable is firmly connected by disconnected and reconnecting the cable.

If the issue continues it is also a possibility that the computer has a faulty cable, try replacing the hard disk drive cable with another cable and/or a new cable.

nel mio caso era la 3. Corrupt NTLDR and/or NTDETECT.COM file.


auguri!

[Swos]

come cavolo si entra nel bios di sto pc!

è un COMPAQ PRESARIO 5296 nn è mio ma dell'azienda!

[Methis]

Cmq manca semplicemente il file NTLDR...prova a copiarlo a mano in c: oppure usa la console di ripristino per ricrearti il mbr.
Non ho capito se ti è capitato a caso o mentre stavi reinstallando il so

[Cimmo]

Originariamente inviato da Swos
come cavolo si entra nel bios di sto pc!

è un COMPAQ PRESARIO 5296 nn è mio ma dell'azienda!

Prova con: canc, f1, f2 o f10 cavoli dovrebbe essere uno di questi...

[Swos]

ma sto file NTLDR da dove lo copio? ho formattato...

[Cimmo]

Originariamente inviato da Swos
ma sto file NTLDR da dove lo copio? ho formattato...

ma l'hai letto il post di avvelenato?

[Swos]

Originariamente inviato da Cimmo
ma l'hai letto il post di avvelenato?

ok file copiati fal disco di winXP

ma ancora niente :\

[Cimmo]

Originariamente inviato da Swos
ok file copiati fal disco di winXP

ma ancora niente :\

Ma sei sicuro che il boot nel bios sia settato su c: e non solo sul cd-rom?

[Swos]

l'ho girato tutto il bios e nn trovo quello x il boot