|
|||||||
|
|
|
 |
|
|
Strumenti |
22-01-2011, 17:20
|
#861 | |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
Quote:
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. |
|
|
|
|
22-01-2011, 17:21
|
#862 |
|
Senior Member
Iscritto dal: Apr 2000
Città: Vicino a Montecatini(Pistoia) Moto:Kawasaki Ninja ZX-9R Scudetti: 29
Messaggi: 53971
|
Dai quest'altro comando:
ifconfig e posta il risultato |
|
|
|
|
22-01-2011, 17:23
|
#863 | |
|
Senior Member
Iscritto dal: Apr 2000
Città: Vicino a Montecatini(Pistoia) Moto:Kawasaki Ninja ZX-9R Scudetti: 29
Messaggi: 53971
|
Quote:
Allora prova: route del default gw 0.0.0.0 ipoa0 route add default gw 85.xx.xx.61 ipoa0 |
|
|
|
|
|
22-01-2011, 17:29
|
#864 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
BCM96358 xDSL Router
Login: admin Password: > sh BusyBox v1.00 (2010.08.12-01:27+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ipoa0 # route add default gateway 85.xx.xxx.61 ipoa route: SIOC[ADD|DEL]RT: No such device # route add default gw 85.xx.xx.61 # route-n route-n: not found # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 85.xx.xxx.61 0.0.0.0 UG 0 0 0 ipoa0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ipoa0 # provando a dare il comondo add senza ipoa mi ha risposto come sopra |
|
|
|
|
22-01-2011, 17:31
|
#865 |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
dai ifconfig
secondo me il problema è l'IP della ipoa0
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. |
|
|
|
|
22-01-2011, 17:31
|
#866 |
|
Senior Member
Iscritto dal: Apr 2000
Città: Vicino a Montecatini(Pistoia) Moto:Kawasaki Ninja ZX-9R Scudetti: 29
Messaggi: 53971
|
Hai sbagliato a scrivere...è ipoa0 non ipoa0.
Comunque il default gateway te l'ha inserito, ora devi togliere l'ultima riga con: route del default gw 0.0.0.0 o route del default gw 0.0.0.0 ipoa0 |
|
|
|
|
22-01-2011, 17:36
|
#867 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
corretto tutto
BCM96358 xDSL Router Login: admin Password: > sh BusyBox v1.00 (2010.08.12-01:27+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ipoa0 # route add default gateway 85.xx.xxx.61 ipoa route: SIOC[ADD|DEL]RT: No such device # route add default gw 85.xx.xxx.61 # route-n route-n: not found # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 85.xx.xxx.61 0.0.0.0 UG 0 0 0 ipoa0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ipoa0 # route del default gw 0.0.0.0 ipao route: SIOC[ADD|DEL]RT: No such device # route del default gw 0.0.0.0 ipa0 route: SIOC[ADD|DEL]RT: No such device # route del default gw 0.0.0.0 ipoa0 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ipoa0 # route del default gw 0.0.0.0 ipoa0 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 # route add default gw 85.xx.xxx.61 ipoa0 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipoa0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 85.xx.xxx.61 0.0.0.0 UG 0 0 0 ipoa0 # |
|
|
|
|
22-01-2011, 17:39
|
#868 |
|
Senior Member
Iscritto dal: Apr 2000
Città: Vicino a Montecatini(Pistoia) Moto:Kawasaki Ninja ZX-9R Scudetti: 29
Messaggi: 53971
|
Prova a vedere se navighi, se non navighi dacci l'output del comando
ifconfig come diceva Harry |
|
|
|
|
22-01-2011, 17:41
|
#869 | |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
Quote:
il default gateway del router è l'ISP 61, la regola deve essere: manda tutto al default gateway via ipoa0(0.0.0.0 85.xx.xxx.61 0.0.0.0 UG 0 0 0 ipoa0) quindi molto probabilmente non è sbagliato l'IP della ipoa0
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. Ultima modifica di Harry_Callahan : 22-01-2011 alle 17:44. |
|
|
|
|
|
22-01-2011, 17:44
|
#870 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
non navigo
|
|
|
|
|
22-01-2011, 17:45
|
#871 | |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
Quote:
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. |
|
|
|
|
|
22-01-2011, 17:48
|
#872 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
# ifconfig
br0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:04 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7207 errors:0 dropped:0 overruns:0 frame:0 TX packets:2274 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:762149 (744.2 KiB) TX bytes:216731 (211.6 KiB) eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:04 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4620 errors:0 dropped:0 overruns:0 frame:0 TX packets:2275 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:515790 (503.7 KiB) TX bytes:230000 (224.6 KiB) Interrupt:25 Base address:0x5120 ipoa0 Link encap:Point-Point Protocol inet addr:85.xx.xxx.62 P-t-P:85.xx.xxx.62 Mask:255.255.255.252 UP POINTOPOINT RUNNING NOARP ALLMULTI MULTICAST MTU:1500 Metri c:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:506 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:35227 (34.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2875 errors:0 dropped:0 overruns:0 frame:0 TX packets:2875 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:472502 (461.4 KiB) TX bytes:472502 (461.4 KiB) wl0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:04 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:2960 TX packets:0 errors:15 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:39 # |
|
|
|
|
22-01-2011, 17:53
|
#873 |
|
Senior Member
Iscritto dal: Apr 2000
Città: Vicino a Montecatini(Pistoia) Moto:Kawasaki Ninja ZX-9R Scudetti: 29
Messaggi: 53971
|
Mi sembra tutto corretto...
|
|
|
|
|
22-01-2011, 18:04
|
#874 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
almeno possiamo dire che ci abbiamo provato;
posso inserire il link di questa discussione nella mail che sto mandando al supporto della tp-link? |
|
|
|
|
22-01-2011, 18:09
|
#875 |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
cionci, alla fine la riga
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ipoa0 indica manda qualsiasi IP con quasiasi subnet alla ipoa0? che risulta(la ipoa0) correttamente 85.xx.xxx.62 se si, avrebbe dovuto funzionare lo stesso
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. |
|
|
|
|
22-01-2011, 18:14
|
#876 |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
@antonyzz visto che hai modificato il default gateway, prova anche senza NAT e con gli indirizzo LAN
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. |
|
|
|
|
22-01-2011, 18:19
|
#877 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
ora ci provo
|
|
|
|
|
22-01-2011, 18:30
|
#878 |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
ho fatto un altra prova ,
ho rimantato il router d-link che funziona ed ho rimandato gli stessi comandi telnet 192.168.1.1 sh route -n e per finire ifconfig cosi giusto per vedere la differenza tra il d-link che funziona e il tplink che non funziona Note: If you have problem with Backspace key, please make sure you configure you r terminal emulator settings. For instance, from HyperTerminal you would need to use File->Properties->Setting->Back Space key sends. Main Menu 1. ADSL Link State 2. LAN 3. WAN 4. DNS Server 5. Route Setup 6. NAT 7. Firewall 8. Quality Of Service 9. Management 10. Passwords 11. Diag 12. Reset to Default 13. Save and Reboot 14. Exit -> sh app: sh BusyBox v1.00 (2008.01.04-02:23+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 85.xx.xxx.60 0.0.0.0 255.255.255.252 U 0 0 0 ipa_0_8_ 35 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 85.xx.xxx.61 0.0.0.0 UG 0 0 0 ipa_0_8_ 35 # ifconfig br0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:70 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:2299024 errors:0 dropped:0 overruns:0 frame:0 TX packets:1277494 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:364864856 (347.9 MiB) TX bytes:1331658776 (1.2 GiB) eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:70 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2299130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1277069 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:406255831 (387.4 MiB) TX bytes:1337738991 (1.2 GiB) Interrupt:23 Base address:0x2800 ipa_0_8_35 Link encap:Point-Point Protocol inet addr:85.xx.xxx.62 P-t-P:85.xx.xxx.62 Mask:255.255.255.252 UP POINTOPOINT RUNNING NOARP ALLMULTI MULTICAST MTU:1500 Metri c:1 RX packets:1132576 errors:0 dropped:0 overruns:0 frame:0 TX packets:906934 errors:0 dropped:2008 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1290356522 (1.2 GiB) TX bytes:139569654 (133.1 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:11 errors:0 dropped:0 overruns:0 frame:0 TX packets:11 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:920 (920.0 B) TX bytes:920 (920.0 B) # la cosa è incredibile sono uguali allora dove sta il problema???? |
|
|
|
|
22-01-2011, 19:25
|
#879 | |
|
Member
Iscritto dal: Jan 2011
Messaggi: 35
|
Quote:
 
|
|
|
|
|
|
22-01-2011, 19:47
|
#880 | |
|
Senior Member
Iscritto dal: Dec 2006
Messaggi: 9542
|
Quote:
scrivi alla TP-Link e facci sapere, intanto aggiorno i BUGS in prima pagina
__________________
Harry Callahan: We're not just going to let you walk out of here. Crook: Who's "we", sucker? Harry Callahan: Smith, and Wesson, and me. |
|
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 17:03.
