|
|||||||
|
|
|
 |
|
|
Strumenti |
18-04-2009, 22:39
|
#1 |
|
Senior Member
Iscritto dal: Oct 2004
Messaggi: 1603
|
Sostituizione scheda disco rotto
Mi si è appena rotto un WD caviar green da 1tb. Il problema è nella scheda di controllo, in quanto il disco non fa alcun rumore anormale, e i messaggi di errore del sistema sono tutti sul collegamento sata
Codice:
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784457791
Buffer I/O error on device sda1, logical block 223057216
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5d ca 47
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784531527
Buffer I/O error on device sda1, logical block 223066433
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:30:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:30:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:30:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e 55 30
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784567087
Buffer I/O error on device sda1, logical block 223070878
lost page write due to I/O error on sda1
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:08:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e 5b 07
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784568583
Buffer I/O error on device sda1, logical block 223071065
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e 5f 47
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784569671
Buffer I/O error on device sda1, logical block 223071201
lost page write due to I/O error on sda1
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:f8:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:f8:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:f8:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e 66 f7
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784571639
Buffer I/O error on device sda1, logical block 223071447
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e 99 0f
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784584463
Buffer I/O error on device sda1, logical block 223073050
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:07:80:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e a9 7f
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784588671
Buffer I/O error on device sda1, logical block 223073576
lost page write due to I/O error on sda1
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5e bd 1f
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784593695
Buffer I/O error on device sda1, logical block 223074204
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5f 30 f7
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784623351
Buffer I/O error on device sda1, logical block 223077911
lost page write due to I/O error on sda1
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6
ata1.00: BMDMA stat 0x25
ata1: SError: { LinkSeq TrStaTrns }
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out
res 51/84:18:67:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x25
ata1: SError: { Handshk }
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out
res 51/84:16:69:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x25
ata1: SError: { Handshk }
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out
res 51/84:18:67:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6
ata1.00: BMDMA stat 0x25
ata1: SError: { Handshk LinkSeq TrStaTrns }
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out
res 51/84:17:68:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x25
ata1: SError: { Handshk }
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out
res 51/84:17:68:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x25
ata1: SError: { Handshk }
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out
res 51/84:17:68:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 62 32 68
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784820327
Buffer I/O error on device sda1, logical block 223102533
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 223102534
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 223102535
lost page write due to I/O error on sda1
ata1: EH complete
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
6a 5b 92 2f
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 1784386095
Buffer I/O error on device sda1, logical block 223048254
lost page write due to I/O error on sda1
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:3f:67:5c/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:3f:67:5c/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:3f:67:5c/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:3f:67:5c/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
ata1.00: BMDMA stat 0x24
ata1: SError: { Handshk }
ata1.00: cmd 35/00:08:3f:67:5c/00:00:6a:00:00/e0 tag 0 dma 4096 out
res 51/84:08:3f:67:5c/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)
Tuttavia ho una domanda: siccome ho un disco gemello identico. Se stacco la scheda di controllo dal disco buono e la saldo su quello rotto dite che funzionerebbe il disco??? Sarebbe utile per recuperare i dati senza generare errori |
|
|
|
19-04-2009, 11:51
|
#2 |
|
Member
Iscritto dal: Sep 2006
Messaggi: 181
|
Purtroppo non è detto
 (rischi di perdere la garanzia svitando le pcb)
|
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 04:36.
