|
|||||||
|
|
|
 |
|
|
Strumenti |
14-10-2005, 16:34
|
#4441 |
|
Senior Member
Iscritto dal: Aug 2002
Città: Trento
Messaggi: 40877
|
allora ricapitolando
leron@linux:~> cd /media leron@linux:/media> ls cdrom floppy FOTO programmi usbdisk xmms_audio_cd leron@linux:/media> di cui vi scrivo a cosa corrispondono: floppy: floppy disk usbdisk: memoria del cellulare cdrom: chiavetta usb programmi: questa cartella compare e prende il nome del cdrom che inserisco, ed è appunto il cdrom |
|
|
14-10-2005, 16:34
|
#4442 | |
|
Senior Member
Iscritto dal: Aug 2002
Città: Trento
Messaggi: 40877
|
Quote:
 arrivo 
|
|
|
|
|
14-10-2005, 16:35
|
#4443 |
|
Senior Member
Iscritto dal: Dec 2001
Città: /dev/rotfl
Messaggi: 7276
|
 c'è qualcosa che non quadra  Codice:
/dev/hda2 /media/cdrom iso9660 ro,user,noauto 0 00 andiamo per gradi su che canale ide hai il cdrom collegato?
__________________
....::::fluxbox è talmente veloce che quando digito startx, il WM aspetta che il server Xorg lo raggiunga - PiloZ::::...
|
|
|
|
14-10-2005, 16:39
|
#4444 | |
|
Senior Member
Iscritto dal: Aug 2002
Città: Trento
Messaggi: 40877
|
Quote:
 corrisponde a questo Codice:
/dev/cdrom /media/cdrom subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 |
|
|
|
|
14-10-2005, 16:44
|
#4445 |
|
Senior Member
Iscritto dal: Dec 2001
Città: /dev/rotfl
Messaggi: 7276
|
sempre in debian postami:
dmesg|grep hda2 ls -al /dev/hda2 mi confermi che il cdrom sta su primary slave?
__________________
....::::fluxbox è talmente veloce che quando digito startx, il WM aspetta che il server Xorg lo raggiunga - PiloZ::::...
|
|
|
|
14-10-2005, 17:12
|
#4446 |
|
Senior Member
Iscritto dal: Aug 2002
Città: Trento
Messaggi: 40877
|
Secondary master (i primary sono dedicati al SATA)
 debian:/home/leron# dmesg|grep hda2 debian:/home/leron# debian:/home/leron# debian:/home/leron# ls -al /dev/hda2 ls: /dev/hda2: No such file or directory debian:/home/leron# |
|
|
|
14-10-2005, 17:15
|
#4447 | |
|
Senior Member
Iscritto dal: Jan 2003
Città: Brianza
Messaggi: 2687
|
Quote:
rieccomi... ieri sera con l'aiuto di Leron ho provato a modificaree il file XF86Config-4, eseguendo le modifiche suggerite per l'installazione manuale. in particolare ho aggiunto i 2 cancelletti alle righe GL... e DRI, e sostituito la scritta "nv" con "nvidia"... risultato: gnome non partiva più e sono stato costretto a ripristinare il file con nano.  allego il file di config di X, anche se è uguale a prima... vorrei allegarvi anche il LOG, ma è un po' grandino e non me lo fa allegare... cosa dite, da molto fastidio se ne copio il contenuto direttamente in un post (usando i tag CODE)? dannazione... ho bisogno di avere una postazione di linux decente al più presto, ma finchè la risoluzione è 800*600 non posso lavorarci...  ps: la soluzione di cambiare distro per il momento non voglio neanche prenderla in considerazione.
__________________
"Le prime giornate di un europeo in America possono essere paragonate alla nascita di un uomo." Franz Kafka
"Don't cry because it's over. Smile because it happened." Theodor Geisel |
|
|
|
|
14-10-2005, 17:21
|
#4448 | |
|
Senior Member
Iscritto dal: Sep 2003
Città: San Mauro Torinese
Messaggi: 5402
|
Quote:
 Vado a scaldare vim...
__________________
Suonare come superamento, anche se per pochi attimi, della realtà costrittiva, come espressione, comunicazione, con modalità proprie, agli altri; http://www.magazzinifranti.it/ |
|
|
|
|
14-10-2005, 17:57
|
#4449 |
|
Senior Member
Iscritto dal: Aug 2002
Città: Trento
Messaggi: 40877
|
può interessare?
Codice:
debian:/etc# dmesg |more
g 'hlt' instruction... OK.
Checking for popad bug... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4616k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 3.00 entry at 0xfba00, last bus=2
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 4 5 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
Simple Boot Flag at 0x7f set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
ACPI wakeup devices:
PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE AC97 AZAL
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4616KiB [1 disk] into ram disk... <6>input: AT Translate
Set 2 keyboard on isa0060/serio0
-
done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 236k freed
Capability LSM initialized
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.11 loaded.
ata_piix version 1.03
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: WDC WD1600JD-00G Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020088k swap on /dev/sda6. Priority:-1 extents:1
EXT3 FS on sda7, internal journal
NTFS driver 2.1.22 [Flags: R/O MODULE].
NTFS volume version 3.1.
logips2pp: Detected unknown logitech mouse model 66
NTFS volume version 3.1.
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: replayed 19 transactions in 0 seconds
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda5: Removing [207 153451 0x0 SD]..done
ReiserFS: sda5: Removing [44827 57067 0x0 SD]..done
ReiserFS: sda5: There were 2 uncompleted unlinks/truncates. Completed
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xf89fa000, 00:50:8d:65:8a:15, IRQ 169
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000bc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
usb 1-1: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000b800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 1 port detected
usb 3-1.1: new full speed USB device using uhci_hcd and address 3
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 201, io mem 0xd2000000
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 5-1: new high speed USB device using ehci_hcd and address 2
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-5: new high speed USB device using ehci_hcd and address 3
hub 5-5:1.0: USB hub found
hub 5-5:1.0: 1 port detected
usb 3-1: USB disconnect, address 2
usb 3-1.1: USB disconnect, address 3
usb 1-1: USB disconnect, address 2
usb 5-5.1: new high speed USB device using ehci_hcd and address 4
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915G Chipset.
agpgart: AGP aperture is 256M @ 0x0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Vendor: Generic Model: USB SD Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0
Vendor: Generic Model: USB CF Reader Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sdc at scsi4, channel 0, id 0, lun 1
Vendor: Generic Model: USB SM Reader Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sdd at scsi4, channel 0, id 0, lun 2
Vendor: Generic Model: USB MS Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
Vendor: USB Model: 2.0 Flash Drive Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sde: 126912 512-byte hdwr sectors (65 MB)
sde: Write Protect is off
sde: Mode Sense: 03 00 00 00
sde: assuming drive cache: write through
SCSI device sde: 126912 512-byte hdwr sectors (65 MB)
sde: Write Protect is off
sde: Mode Sense: 03 00 00 00
sde: assuming drive cache: write through
/dev/scsi/host4/bus0/target0/lun3: p1
Attached scsi removable disk sde at scsi4, channel 0, id 0, lun 3
usb-storage: device scan complete
SCSI device sdf: 2048000 512-byte hdwr sectors (1049 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 06 00 00
sdf: assuming drive cache: write through
SCSI device sdf: 2048000 512-byte hdwr sectors (1049 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 06 00 00
sdf: assuming drive cache: write through
/dev/scsi/host5/bus0/target0/lun0: p1
Attached scsi removable disk sdf at scsi5, channel 0, id 0, lun 0
usb-storage: device scan complete
hw_random hardware driver 1.0.0 loaded
Buffer I/O error on device sdf1, logical block 2047936
Buffer I/O error on device sdf1, logical block 2047937
Buffer I/O error on device sdf1, logical block 2047938
Buffer I/O error on device sdf1, logical block 2047939
Buffer I/O error on device sdf1, logical block 2047940
Buffer I/O error on device sdf1, logical block 2047936
Buffer I/O error on device sdf1, logical block 2047937
Buffer I/O error on device sdf1, logical block 2047938
Buffer I/O error on device sdf1, logical block 2047939
Buffer I/O error on device sdf1, logical block 2047940
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 49655 usecs
intel8x0: clocking to 48000
Real Time Clock Driver v1.12
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
r8169: eth0: link up
NET: Registered protocol family 17
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 248 bytes per conntrack
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 12:58:54 PDT 2005
NET: Registered protocol family 10
Disabled Privacy Extensions on device c030c060(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
usb 2-2: new full speed USB device using uhci_hcd and address 2
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
cdc_acm 2-2:1.1: ttyACM0: USB ACM device
cdc_acm 2-2:1.3: ttyACM1: USB ACM device
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
Vendor: Sony Eri Model: Memory Stick Rev: 0000
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdg: 3895296 512-byte hdwr sectors (1994 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 6a 00 00
sdg: assuming drive cache: write through
SCSI device sdg: 3895296 512-byte hdwr sectors (1994 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 6a 00 00
sdg: assuming drive cache: write through
/dev/scsi/host6/bus0/target0/lun0: p1
Attached scsi removable disk sdg at scsi6, channel 0, id 0, lun 0
usb-storage: device scan complete
Inbound IN=eth0 OUT= MAC=00:50:8d:65:8a:15:00:0f:b5:b5:1c:5c:08:00 SRC=83.81.206.142 DST=192.168.0.2 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=51108 DF PROTO=TCP SPT=4940 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
Inbound IN=eth0 OUT= MAC=00:50:8d:65:8a:15:00:0f:b5:b5:1c:5c:08:00 SRC=83.81.206.142 DST=192.168.0.2 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=51411 DF PROTO=TCP SPT=4940 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
Inbound IN=eth0 OUT= MAC=00:50:8d:65:8a:15:00:0f:b5:b5:1c:5c:08:00 SRC=83.81.206.142 DST=192.168.0.2 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=51910 DF PROTO=TCP SPT=4940 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
|
|
|
|
14-10-2005, 18:16
|
#4450 |
|
Senior Member
Iscritto dal: Sep 2003
Città: San Mauro Torinese
Messaggi: 5402
|
/dev/hdc non lo vede...
prova a caricare il modulo ide-cd ed eventualmente aggiungilo a /etc/modules
__________________
Suonare come superamento, anche se per pochi attimi, della realtà costrittiva, come espressione, comunicazione, con modalità proprie, agli altri; http://www.magazzinifranti.it/ |
|
|
|
14-10-2005, 18:21
|
#4451 | |
|
Senior Member
Iscritto dal: Aug 2004
Città: Mariano Comense (Como)
Messaggi: 5657
|
Quote:
__________________
Acer Aspire 5740G & Microsoft Windows 7 Home Premium 64bit (Client) | Acer Aspire 5310 & Microsoft Windows XP Pro SP3 32bit (Server)
n.2 WD MyBook mirror edition 2TB (RAID 0) | Netgear EVA9150 | Sony 52w4500 | Logitech Z-5500 Digital | Logitech G25 | Homemade F1 Cockpit |
|
|
|
|
14-10-2005, 18:22
|
#4452 |
|
Senior Member
Iscritto dal: Dec 2001
Città: /dev/rotfl
Messaggi: 7276
|
Leron ricordami la versione del kernel che stai usando, sei hai il dvd in secondary master si linux si trasformerebbe in /dev/hdc
di hdc nel tuo output di dmesg non compare niente, potrebbe essere che stia usando l'emulazione scsi. stai usando lilo o grub?....postami anche il file di configurazione del bootloader. tnx
__________________
....::::fluxbox è talmente veloce che quando digito startx, il WM aspetta che il server Xorg lo raggiunga - PiloZ::::...
|
|
|
|
14-10-2005, 18:27
|
#4453 | |
|
Senior Member
Iscritto dal: Aug 2002
Città: Trento
Messaggi: 40877
|
Quote:
sto usando grub questo è il menu.lst di grub Codice:
# menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 30 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specifiv kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro # kopt=root=/dev/hda7 ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,6) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery mode) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.12-1-686-smp root (hd0,6) kernel /boot/vmlinuz-2.6.12-1-686-smp root=/dev/sda7 ro initrd /boot/initrd.img-2.6.12-1-686-smp savedefault boot title Debian GNU/Linux, kernel 2.6.12-1-686-smp (recovery mode) root (hd0,6) kernel /boot/vmlinuz-2.6.12-1-686-smp root=/dev/sda7 ro single initrd /boot/initrd.img-2.6.12-1-686-smp savedefault boot title Debian GNU/Linux, kernel 2.6.12-1-386 root (hd0,6) kernel /boot/vmlinuz-2.6.12-1-386 root=/dev/sda7 ro initrd /boot/initrd.img-2.6.12-1-386 savedefault boot title Debian GNU/Linux, kernel 2.6.12-1-386 (recovery mode) root (hd0,6) kernel /boot/vmlinuz-2.6.12-1-386 root=/dev/sda7 ro single initrd /boot/initrd.img-2.6.12-1-386 savedefault boot title Debian GNU/Linux, kernel 2.4.27-2-386 root (hd0,6) kernel /boot/vmlinuz-2.4.27-2-386 root=/dev/sda7 ro initrd /boot/initrd.img-2.4.27-2-386 savedefault boot title Debian GNU/Linux, kernel 2.4.27-2-386 (recovery mode) root (hd0,6) kernel /boot/vmlinuz-2.4.27-2-386 root=/dev/sda7 ro single initrd /boot/initrd.img-2.4.27-2-386 savedefault boot title SUSE LINUX 10.0 root (hd0,4) kernel /boot/vmlinuz root=/dev/sda5 vga=normal showopts ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off 3 initrd /boot/initrd title Windows root (hd0,0) makeactive chainloader +1 ### END DEBIAN AUTOMAGIC KERNELS LIST PS: la mia scheda madre ha 2 sata e 1 canale eide (un solo "master e slave", dato che gli altri 2 sono sul sata, quindi solo un master e slave, non 2 come solitamente si trova) è possibile che il controller sia lo stesso e nonostante la "fascetta" eide lo veda come sata? Ultima modifica di Leron : 14-10-2005 alle 18:29. |
|
|
|
|
14-10-2005, 18:44
|
#4454 | |
|
Senior Member
Iscritto dal: Aug 2003
Messaggi: 6386
|
Quote:
|
|
|
|
|
14-10-2005, 18:49
|
#4455 | |
|
Senior Member
Iscritto dal: May 2002
Città: somewhere in Europe
Messaggi: 2554
|
Quote:
XF86Config-4 c'è una sezione dove ci sono le varie risoluzioni, tu devi aggiungere come prima risoluzione quella che ti aggrada di +, gnome tenterà di far partire il desktop con quella risoluzione per prima, se non ce la fa prova la seconda. Sul mio pc senza drivers non saliva di frequenza il monitor, e adesso devo ancora vedere epr farlo andare a 100Hz, ma dovrebbe esserci una impostazione sempre in quel file. |
|
|
|
|
14-10-2005, 18:55
|
#4456 |
|
Senior Member
Iscritto dal: Sep 2004
Città: Interamnia Urbs
Messaggi: 2125
|
Buonasera, appena tornato dai monti aquilani
 @Vegeta: il kernel funzia :*
__________________
Un wormhole (buco di tarlo, in italiano), detto anche Ponte di Einstein-Rosen, è una ipotetica caratteristica topologica dello spaziotempo che è essenzialmente una "scorciatoia" da un punto dell'universo a un altro, che permetterebbe di viaggiare tra di essi più velocemente di quanto impiegherebbe la luce a percorrere la distanza attraverso lo spazio normale. Go to a Wormhole |
|
|
|
14-10-2005, 19:00
|
#4457 | |
|
Senior Member
Iscritto dal: Jan 2003
Città: Brianza
Messaggi: 2687
|
Quote:
questa è una buona notizia. più tardi provo a mettere almeno la 1024... visto che la 1280 non la tiene qualche idea su come risolvere il problema dei driver?
__________________
"Le prime giornate di un europeo in America possono essere paragonate alla nascita di un uomo." Franz Kafka
"Don't cry because it's over. Smile because it happened." Theodor Geisel |
|
|
|
|
14-10-2005, 19:00
|
#4458 | |
|
Senior Member
Iscritto dal: Oct 2001
Messaggi: 11471
|
Quote:
ciao 
|
|
|
|
|
14-10-2005, 19:28
|
#4459 | |
|
Senior Member
Iscritto dal: Jan 2003
Città: Brianza
Messaggi: 2687
|
Quote:
forse mi sono spiegato coi piedi le righe le o commentate e il parametro nv l'avevo sostituito con nvidia... il fatto è che poi non partiva più gnome... quindi, riportandolo come prima, sono riuscito a salvarlo e ad allegarlo (manovra probabilmente inutile)... ora l'ho allegato con le modifiche che farei. ecco invece il log: http://neg136.altervista.org/XFree86LOG ps: ho fatto come mi ha consigliato h1jack3r e ora almeno sto a 1024
__________________
"Le prime giornate di un europeo in America possono essere paragonate alla nascita di un uomo." Franz Kafka
"Don't cry because it's over. Smile because it happened." Theodor Geisel |
|
|
|
|
14-10-2005, 19:42
|
#4460 |
|
Senior Member
Iscritto dal: Dec 2001
Città: /dev/rotfl
Messaggi: 7276
|
Leron mi dici che su suse il cdrom funziona, dimmi con che comando lo monti.
tnx
__________________
....::::fluxbox è talmente veloce che quando digito startx, il WM aspetta che il server Xorg lo raggiunga - PiloZ::::...
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 04:56.
