Montaggio dischi

[CielitoLindux]

Cia a tutti.
Da stamattina non riesco più a montare l'hd esterno e il FS di win sulla mia Fedora. Venerdì mentre trasferivo dei file su l'hd esterno l'ho notato molto lento. Solitamente trasferiva a 24 Mb/s mentre quel giorno a meno di 1. Googlando ho visto che si poteva provare a risolvere il problema installando ntfs-3g fuse e ntfs-config. Così ho fatto, ho smanettato per cercare di configurare al meglio ma al terminale mi dava alcuni errori. Così ho abbandonato e ho continuato a trasferire lentamente. Stamani all'accensione del pc vedo prima del login l'icona di "problemi d'avvio" e vedo che mi dice che ha avuto problemi a montare un FS ntfs. Ora vedo che se attacco l'hd esterno mi dice che solo root può montarlo. Stessa cosa per il disco di win.
Come posso risolvere? Ho provato e rimuovere ntfs-3g e ntfs-config ma il risultato è lo stesso anche rebootando la macchina.
Grazie a chi mi darà una mano.

[sacarde]

ma ntfs-3g non c'era gia?


che errore vedi da: dmesg
?


p.s.
qui c'e' una vecchia guida
http://www.howtoforge.com/ntfs_3g_fedora7

[niubbone24]

Hai provato a montare il disco su una macchina diversa? Giusto per escludere che sia un disco danneggiato la causa del problema

[CielitoLindux]

Buongiorno e grazie per l'attenzione.
@Sacarde: ntfs-3g in effetti c'era già così come fuse mancava solo ntfs-config. Ho cmq messo nel comando di installazione anche questi due in modo tale che se non c'era lo installasse e se c'era lo aggiornasse se da aggiornare.
dmsg da un sacco di cose (con degli errori):

ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15420), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10 64bit mmio: [0xf0426900-0xf042690f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10 io port: [0x2210-0x2217]
pci 0000:00:03.2: reg 14 io port: [0x2238-0x223b]
pci 0000:00:03.2: reg 18 io port: [0x2218-0x221f]
pci 0000:00:03.2: reg 1c io port: [0x223c-0x223f]
pci 0000:00:03.2: reg 20 io port: [0x21e0-0x21ef]
pci 0000:00:03.3: reg 10 io port: [0x2220-0x2227]
pci 0000:00:03.3: reg 14 32bit mmio: [0xf0424000-0xf0424fff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xf0400000-0xf041ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xf0425000-0xf0425fff]
pci 0000:00:19.0: reg 18 io port: [0x2100-0x211f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x2120-0x213f]
pci 0000:00:1a.1: reg 20 io port: [0x2140-0x215f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0426000-0xf04263ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0420000-0xf0423fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x2160-0x217f]
pci 0000:00:1d.1: reg 20 io port: [0x2180-0x219f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0426400-0xf04267ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0x2228-0x222f]
pci 0000:00:1f.2: reg 14 io port: [0x2240-0x2243]
pci 0000:00:1f.2: reg 18 io port: [0x2230-0x2237]
pci 0000:00:1f.2: reg 1c io port: [0x2244-0x2247]
pci 0000:00:1f.2: reg 20 io port: [0x21f0-0x21ff]
pci 0000:00:1f.2: reg 24 io port: [0x2200-0x220f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf1000000-0xf1ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 24 io port: [0x1100-0x117f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf1000000-0xf31fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xf01fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15420), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0e: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
pnp 00:0e: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
pnp 00:0e: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
pnp 00:0e: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:0e: ioport range 0x400-0x41f has been reserved
system 00:0e: ioport range 0x420-0x43f has been reserved
system 00:0e: ioport range 0x440-0x45f has been reserved
system 00:0e: ioport range 0x460-0x47f has been reserved
system 00:0e: ioport range 0x480-0x48f has been reserved
system 00:0e: ioport range 0xfa00-0xfa3f has been reserved
system 00:0e: ioport range 0xfc00-0xfc7f has been reserved
system 00:0e: ioport range 0xfc80-0xfcff has been reserved
system 00:0e: ioport range 0xfe00-0xfe7f has been reserved
system 00:0e: ioport range 0xfe80-0xfeff has been reserved
system 00:0f: ioport range 0x4d0-0x4d1 has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0x100000-0x7f7fffff could not be reserved
system 00:10: iomem range 0xe4000-0xfffff could not be reserved
system 00:10: iomem range 0xfec01000-0xfecfffff has been reserved
system 00:10: iomem range 0xfed00400-0xfed3ffff has been reserved
system 00:10: iomem range 0xfed45000-0xffffffff has been reserved
system 00:10: iomem range 0xf4000000-0xf7ffffff has been reserved
system 00:10: iomem range 0xd0000-0xe3fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x1000-0x1fff
pci 0000:00:01.0:   MEM window: 0xf1000000-0xf31fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000f01fffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:01: resource 1 mem: [0xf1000000-0xf31fffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf01fffff]
pci_bus 0000:20: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:20: resource 1 mem: [0x80000000-0x801fffff]
pci_bus 0000:20: resource 2 pref mem [0x80200000-0x803fffff]
pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11904k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1269936679.497:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1699
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15420), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c15420), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
vesafb: framebuffer at 0xe0000000, mapped to 0xf7c80000, using 6144k, total 262144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:c600
vesafb: pmi: set display start = c00cc636, set palette = c00cc6a0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 7f7ce68a 00320 (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:0b: 1.2 TPM (device-id 0xB, rev-id 16)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0x2220 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x21f0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x21f8 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0426000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.9-70.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0426400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.9-70.fc12.i686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.9-70.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.9-70.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.9-70.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.9-70.fc12.i686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
  Magic number: 2:698:170
rtc_cmos 00:03: setting system clock to 2010-03-30 08:11:22 UTC (1269936682)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
psmouse serio1: ID: 10 00 64
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: WDC WD2500JS-60MHB5, 10.02E04, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 
ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, HA03, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H653L HA03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 548k freed
Write protecting the kernel text: 3676k
Write protecting the kernel read-only data: 1752k
dracut: dracut-004-4.fc12
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
udev: starting version 145
dracut: Starting plymouth daemon
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
device-mapper: multipath: version 1.1.0 loaded
dracut: Scanning devices sda5  for LVM volume groups 
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_pclinux" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_pclinux" now active
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_pclinux-lv_root
dracut: Loading SELinux policy
type=1404 audit(1269936688.184:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 158931 rules.
SELinux: 8192 avtab hash slots, 158931 rules.
SELinux:  8 users, 11 roles, 3034 types, 150 bools, 1 sens, 1024 cats
SELinux:  77 classes, 158931 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1269936688.461:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0f:fe:5d:79:9d
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1002ff-0ff
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: WMI: Mapper loaded
input: HP WMI hotkeys as /devices/virtual/input/input5
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  190.53  Tue Dec  8 18:51:41 PST 2009
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
EXT4-fs (sda3): mounted filesystem with ordered data mode
SELinux: initialized (dev sda3, type ext4), uses xattr
fuse init (API version 7.13)
SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
Adding 4128760k swap on /dev/dm-1.  Priority:-1 extents:1 across:4128760k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x6f2, pf=0x1, revision=0x56
platform microcode: firmware: requesting intel-ucode/06-0f-02
microcode: CPU1 sig=0x6f2, pf=0x1, revision=0x56
platform microcode: firmware: requesting intel-ucode/06-0f-02
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: CPU0 updated to revision 0x5a, date = 2007-09-26 
microcode: CPU1 updated to revision 0x5a, date = 2007-09-26 
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x280 offMax=0x1db8
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Slow work thread pool: Starting up
Slow work thread pool: Ready
CIFS: Unknown mount option umask
SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
CIFS: Unknown mount option umask
SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
eth0: no IPv6 routers present
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts

@niubbone24: i dischi funzionano perfettamente. Ho anche provato a passare da win per attaccarlo e staccarlo in maniera corretta ma non è cambiato nulla.

Ripeto che sia l'hd esterno che la partizione win interna al pc funzionano bene. Il problema è che solo root può montarle e smontarle cosa che prima non era.

[sacarde]

ma se hai i device in /etc/fstab
hai il parametro:

- user= when mounted the mount point is owned by the user who mounted the partition
- users= when mounted the mount point is owned by the user who mounted the partition and the group users


o e' un errore di permessi



p.s.
per leggere meglio il dmesg usa:
dmesg | grep sd.... (o quello che cerchi)

[CielitoLindux]

Ciao sacarde.
Nel fstab, per queste due partizioni ho:

#Entry for /dev/sdb1 :
UUID=5E5C74705C7444B5	/media/GIACOMO	ntfs-3g	defaults,nosuid,nodev,locale=it_IT.UTF-8	0	0
#Entry for /dev/sda1 :
UUID=48E8E520E8E50CCE	/media/sda1	ntfs	defaults,nls=utf8,umask=0222	0	0

Per la sda1 probabilmente devo sostituire umask=0222 con umask=0777 così come ho per altre partizioni che monto in automatico. In questo modo risolverei il problema della partizione win.
Ma per sdb1 (l'hd esterno)?

[sacarde]

hai aggiornato qualche pacchetto?

tipo il file: /usr/share/polkit-1/actions/org.freedesktop.devicekit.disks.policy


come dice nel post #9 qui:
http://forums.fedoraforum.org/showth...95&language=it

[CielitoLindux]

Io non l'ho modificato. A meno che nella configurazione di ntfs-3g non sia andato a scrivere in questo file.
Cmq aprendolo mi da molte sezioni simili a queste (questa è la prima parte dell'interno del file):

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE policyconfig PUBLIC
 "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/PolicyKit/1.0/policyconfig.dtd">
<policyconfig>
  <vendor>The DeviceKit Project</vendor>
  <vendor_url>http://hal.freedesktop.org/docs/DeviceKit/</vendor_url>
  <icon_name>drive-removable-media</icon_name>

  <action id="org.freedesktop.devicekit.disks.filesystem-mount">
    <description>Mount a device</description>
    <description xml:lang="da">Montér en enhed</description>
    <message>Authentication is required to mount the device</message>
    <message xml:lang="da">Autorisering er påkrævet for at montere et fil system</message>
    <defaults>
      <allow_any>no</allow_any>
      <allow_inactive>no</allow_inactive>
      <allow_active>yes</allow_active>
    </defaults>
  </action>

  <action id="org.freedesktop.devicekit.disks.filesystem-mount-system-internal">
    <description>Mount a system-internal device</description>
    <description xml:lang="da">Montér en intern enhed</description>
    <message>Authentication is required to mount the device</message>
    <message xml:lang="da">Autorisering er påkrævet for at montere et fil system</message>
    <defaults>
      <allow_any>no</allow_any>
      <allow_inactive>no</allow_inactive>
      <allow_active>auth_admin_keep</allow_active>
    </defaults>
  </action>

  <action id="org.freedesktop.devicekit.disks.filesystem-check">
    <description>Check file system on a device</description>
    <description xml:lang="da">Check fil system for en enhed</description>
    <message>Authentication is required to check the file system on the device</message>
    <message xml:lang="da">Autorisering er påkrævet for at checke fil systemet på en enhed</message>
    <defaults>
      <allow_any>no</allow_any>
      <allow_inactive>no</allow_inactive>
      <allow_active>yes</allow_active>
    </defaults>
  </action>

  <action id="org.freedesktop.devicekit.disks.filesystem-check-system-internal">
    <description>Check file system of a system-internal device</description>
    <description xml:lang="da">Check fil system for en intern enhed</description>
    <message>Authentication is required to check the file system on the device</message>
    <message xml:lang="da">Autorisering er påkrævet for at checke fil systemet på en enhed</message>
    <defaults>
      <allow_any>no</allow_any>
      <allow_inactive>no</allow_inactive>
      <allow_active>auth_admin_keep</allow_active>
    </defaults>
  </action>

[CielitoLindux]

Cercando di recuperare quelle poche conoscenze di linux che ho, ho pensato che in fstab ci sono le partizioni che vengono montate in automatico all'avvio della macchina. Io però non voglio che siano montate in automatico queste due partizioni, bensì solo quando richieste (l'hd esterno al momento in cui l'attacco e la partizione win al momento in cui "ci clicko" con relativa richiesta di pwd root). Quindi queste due partizioni in fstab non dovrebbero esserci. Basta eliminarle dal fstab??

[CielitoLindux]

Ho risolto eliminando le partizioni dal montaggio automatico in /etc/fstab. Ora è tutto come prima.

Grazie per la pazienza.

Alla prossima (mia) disavventura.