xroastcd non va

supermarchino · 01-11-2004, 14:43

Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "ATA:1,0,0" gracetime=2 fs=1914k -v -useinfo speed=3 -dao -pad -immed -data "/home/marco/Desktop/warty-release-live-i386.iso" ...

scsidev: 'ATA:1,0,0'
devname: 'ATA'
scsibus: 1 target: 0 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.81 04/04/18 Copyright 1997 J. Schilling').
Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
SCSI buffer size: 64512
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <[email protected]>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R2102'
Revision : '1015'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1312768 = 1282 KB
FIFO size : 1959936 = 1914 KB
pregap1: -1
Track 01: data 642 MB padsize: 30 KB
Total size: 738 MB (73:09.21) = 329191 sectors
Lout start: 738 MB (73:11/16) = 329191 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 8159
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
trackno=0
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 0C 1C 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 200s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.

cdrecord: fifo had 129 puts and 101 gets.
write track data: error after 6348800 bytes
cdrecord: fifo was 0 times empty and 58 times full, min fill was 86%.
Writing time: 15.459s

supermarchino · 02-11-2004, 16:47

up

Al Azif · 03-11-2004, 13:10

Boh, prova ad aumentare il fifo nelle opzioni, ma non sono sicuro, non ho capito l'errore.

supermarchino · 07-11-2004, 16:14

Quote:

Originariamente inviato da Al Azif
Boh, prova ad aumentare il fifo nelle opzioni, ma non sono sicuro, non ho capito l'errore.

dove trovo i settaggi di xroastcd per eventualmente cancellarli e reinstallare daccapo? (se reinstallo e basta li mantiene...)

wubby · 07-11-2004, 16:27

Quote:

Originariamente inviato da supermarchino
dove trovo i settaggi di xroastcd per eventualmente cancellarli e reinstallare daccapo?
(se reinstallo e basta li mantiene...)

Probabilmente scrive su .xroastcd nella tua home.

supermarchino · 07-11-2004, 18:09

non è lì

wubby · 07-11-2004, 18:20

Quote:

Originariamente inviato da supermarchino
non è lì

updatedb

e poi

locate xroastcd

supermarchino · 15-11-2004, 00:42

Quote:

Originariamente inviato da wubby
updatedb

e poi

locate xroastcd

l'ulitmo comando non mi dà nessun output ...

01-11-2004, 14:43	#1
supermarchino Senior Member Iscritto dal: Dec 2001 Città: 'Torturato da un Ideale, non ne portava ancóra ben distinta in cima de' pensieri l'imagine.' * ** (Firenze, Rive Gauche, quartiere S. Niccolò) Messaggi: 6122	xroastcd non va Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "ATA:1,0,0" gracetime=2 fs=1914k -v -useinfo speed=3 -dao -pad -immed -data "/home/marco/Desktop/warty-release-live-i386.iso" ... scsidev: 'ATA:1,0,0' devname: 'ATA' scsibus: 1 target: 0 lun: 0 Warning: Using badly designed ATAPI via /dev/hd* interface. Linux sg driver version: 3.5.27 cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.81 04/04/18 Copyright 1997 J. Schilling'). Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling SCSI buffer size: 64512 Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <[email protected]>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'TOSHIBA ' Identifikation : 'DVD-ROM SD-R2102' Revision : '1015' Device seems to be: Generic mmc2 DVD-ROM. Current: 0x000A Profile: 0x0010 Profile: 0x0008 Profile: 0x0009 Profile: 0x000A (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R Drive buf size : 1312768 = 1282 KB FIFO size : 1959936 = 1914 KB pregap1: -1 Track 01: data 642 MB padsize: 30 KB Total size: 738 MB (73:09.21) = 329191 sectors Lout start: 738 MB (73:11/16) = 329191 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 0 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 337350 (75:00/00) Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 8159 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. cdrecord: WARNING: Drive returns wrong startsec (0) using -150 trackno=0 Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 0C 1C 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.000s timeout 200s cdrecord: A write error occured. cdrecord: Please properly read the error message above. cdrecord: fifo had 129 puts and 101 gets. write track data: error after 6348800 bytes cdrecord: fifo was 0 times empty and 58 times full, min fill was 86%. Writing time: 15.459s __________________ 'Sotto il grigio diluvio democratico odierno, che molte belle cose e rare sommerge miseramente...' \| powered by Ubuntu Gutsy + eLawOffice 1. XCCube EZ65II white: Prescott [email protected]. SM173P white \| 2. Aspire 1203xc@P3-S 1.4 512k L2 \| 3. Barton M 2.6+@2,33GHz \| 4. Sony Clié TJ37 wifi \| 5. BB8100 Pearl

02-11-2004, 16:47	#2
supermarchino Senior Member Iscritto dal: Dec 2001 Città: 'Torturato da un Ideale, non ne portava ancóra ben distinta in cima de' pensieri l'imagine.' * ** (Firenze, Rive Gauche, quartiere S. Niccolò) Messaggi: 6122	up __________________ 'Sotto il grigio diluvio democratico odierno, che molte belle cose e rare sommerge miseramente...' \| powered by Ubuntu Gutsy + eLawOffice 1. XCCube EZ65II white: Prescott [email protected]. SM173P white \| 2. Aspire 1203xc@P3-S 1.4 512k L2 \| 3. Barton M 2.6+@2,33GHz \| 4. Sony Clié TJ37 wifi \| 5. BB8100 Pearl

07-11-2004, 18:09	#6
supermarchino Senior Member Iscritto dal: Dec 2001 Città: 'Torturato da un Ideale, non ne portava ancóra ben distinta in cima de' pensieri l'imagine.' * ** (Firenze, Rive Gauche, quartiere S. Niccolò) Messaggi: 6122	non è lì __________________ 'Sotto il grigio diluvio democratico odierno, che molte belle cose e rare sommerge miseramente...' \| powered by Ubuntu Gutsy + eLawOffice 1. XCCube EZ65II white: Prescott [email protected]. SM173P white \| 2. Aspire 1203xc@P3-S 1.4 512k L2 \| 3. Barton M 2.6+@2,33GHz \| 4. Sony Clié TJ37 wifi \| 5. BB8100 Pearl

03-11-2004, 13:10	#3
Al Azif Senior Member Iscritto dal: Jul 2002 Città: Potenza Messaggi: 1137	Boh, prova ad aumentare il fifo nelle opzioni, ma non sono sicuro, non ho capito l'errore.

Strumenti
Mostra una versione stampabile Invia questa pagina per email