IDE.EXE

[controguerra]

Ragazzi mi sono ritrovato un file di nome IDE.EXE
Ogni volta che riavvio il pc il desktop mi si riempie di file di testo che aprendoli mi da:


===================================================================
Maxtor's Diamond Max OEM Drive
3.5" EIDE Drives Model Numbers
83209A5
===================================================================

KEY FEATURES:
* 10 ms average seek * ATA-3 Compliant
* Low power consumption * PIO mode 4 / DMA 2 interface
* ATA power saving commands * Zone density recording
* Supports EPA Energy star * S.M.A.R.T. Capability
standards (Green PC friendly) * Superior data throughput
* >500,000 hours MTBF * 256k Cache with MaxCache manager
Algorithms
SPECIFICATIONS:
+---------+-----------+---------+-----------+--------------+
| Model | Capacity | Disks | Surfaces | Sectors per |
| Number | | | & Heads | Drive |
+---------+-----------+---------+-----------+--------------+
| 83209A5 | 3,209 MB | 3 | 5 | 6,267,744 |
+---------+-----------+---------+-----------+--------------+



Bytes per block :........................... 512
Integrated Controller/Interface: ........... ATA-3
Actuator type: ............................. Rotary Voice Coil
Data Zones per Surface: .................... 16
Servo: ..................................... Embedded
Tracks Per surface: ........................ 6,569 Clyinders
Track Density: ............................. 6,461 tpi
Flux Density: .............................. 155.0 kfci
Recording Density: ......................... 137.8 kbpi
Encoding Method: ........................... RLL 8,9
Buffer Size: ............................... 256 k
Interleave: ................................ 1:1

PERFORMANCE:
Seek performance (including settling time and servo overhead)

Seek times :
Track to track: ....................... 1 ms
Average: .............................. 10 ms
Maximum: .............................. 21 ms

Spindle speed (+-0.1%): .................... 5,400 RPM
Average latency: ........................... 5.56 ms
Controller overhead: ....................... 0.5 ms

Data transfer rate:
To/From Media: ........................... 8 - 13.42 MBs
To/from Host (without I/O CHRDY): ........ PIO Mode 3, 11.1 MBs
To/from Host (with I/O CHRDY): ........... PIO Mode 4, 16.7 MBs
DMA Transfers ............................ Mode 2, 16.7 MBs

Start time (0 - Drive Ready)
Average .................................. <= 20.0 sec
Stop Time/Power Down:
Average .................................. <= 5.0 sec

Power Requirements(Average)

Mode +12VDC +-8% +5VDC +-5% Power/Duration
---- ----------- ---------- --------------
Active 260 mA 420 mA 5.00 W
Idle 260 mA 250 mA 4.50 W
Read/Write 260 mA 450 mA 5.30 W
Spin-up 1100 mA 450 mA 12.4 W
Sleep 2.00 mA 115 mA 0.60 W
Standby 2.00 mA 154 mA 0.80 W


Power Mode Definitions:
-----------------------
Active The drive is spinning and most circuitry is powered on.
The drive is capable of responding to read commands in
the shortest possible time. Read/Write heads are positioned
over the data area.

Idle The drive is spinning., the actuator is parked and powered
off, and all other circuitry is powered on. The drive is
capable of responding to read commands within 40 ms.

Read/Write Data is being read from or written to the drive.

Spin-up The drive is spinning up following initial application
of power and has yet not reached full speed. Maximum
current draw lasts one second.

Sleep This is the lowest power state. The interface becomes
inactive. A software or hardware reset is required to
return the drive to Standby.

Standby The spin motor is not spinning. The drive will leave this
mode upon receipt of a command that requires disk access.
The time-out value for this mode is programmable. The
buffer is active to accept write data.




Physical:

Height: 1.00" 25.4 mm
Length: 5.75" 146.1 mm
Width: 4.00" 101.6 mm
Weight: 1.2 lb. 0.5 kg

Environmental:

Temperature
Operating (stabilized).................. 5 C to 55 C
Non-operating/Storage .................. -40 C to 71 C
MIL-STD-810E Method 501.3
Humidity
Operating .............................. 5% to 95% non-condensing
Non-operating/Storage .................. 5% to 95% non-condensing

Wet Bulb ................................... 27 C Maximum

Altitude (relative to sea level)
Operating .............................. -200 to 10,000 feet
Non-operating .......................... MIL-STD-810E Method 500.3

Reliability and Maintenance:

MTBF ................................... >500,000 hours
AFR .................................... <=1.7%
Preventative Maintenance ............... None
Component design life .................. 5 years (minimum)
Error Rate ............................. <1 per 10^13 bits read
Start/Stop Cycles....................... >50,000
Quality Acceptance Rate ................ 99.5% (<1,500 DPPM)

Shock & Vibration (typical):

Operating Shock ........................ 20 Gs, 2ms (no errors)
Non-Operating Shock .................... 150 Gs, 2ms (no damage)

Operating Vibration (without non-recoverable errors)
Per MIL-STD-810E Method 514.4
10Hz ................................. 0.0125 G^2/Hz
40Hz ................................. 0.0125 G^2/Hz
500Hz ................................. 0.000125 G^2/hz

Per MIL-STD-810E Method 514.4
Non-operating Vibration (without non-recoverable errors)
10Hz ................................. 0.015 G^2/Hz
40Hz ................................. 0.015 G^2/Hz
500Hz ................................. 0.00015 G^2/Hz

Operating Swept Sine Vibration (1 octave/minute)
5-20 Hz .............................. 0.049" (double amplitude)
21-300 Hz ............................ 1.0 G peak amplitude

Acoustic Noise:
Sound power (per ISO 7779) ............. 36 dBA (typical)


JUMPER DESIGNATION
|J50|J48|J46|J44|J42|
+-------------------------------------+---+---+---+---+---+
| Master/Slave | | | | | |
| Only Drive in single drive system* | J | | | | |
| Master in a dual drive system* | J | | | | |
| Slave in a dual drive system | 0 | | | | |
+-------------------------------------+---+---+---+---+---+
| Cable Select | | | | | |
| Disabled* | | O | | | |
| Enabled | | J | | | |
+-------------------------------------+---+---+---+---+---+
| 4092 Cylinder Option | | | | | |
| Disabled* | | | O | | |
| Enabled | | | J | | |
+-------------------------------------+---+---+---+---+---+
| Factory Reserved | | | | O | |
+-------------------------------------+---+---+---+---+---+
| Factory Reserved | | | | | O |
+-------------------------------------+---+---+---+---+---+

J=Jumpered O=Open *=Default
Pin 1
J1 IDE Connector | J2 Power
___________ ________|_________________________
| .................... || @ * * o |/ \
| .......... ......... || @ o o o o || O O O O |
|______________________||___________||_________|
| | | | | | | | |
| | | | | | | | |
J50 Master/Slave -----' | | | | | | | `-+12V (Yellow)
J48 Cable Select -------' | | | | | `---+12V Return (Black)
J46 4092 Cyl Limitation---' | | | `----- +5V Return (Black)
J44 Factory Reserved -------' | `------- +5V (Red)
J42 Factory Reserved ---------'

@ = Default Jumped Positions
* = "Spare" Jumper Position
o = Default Open Positions




CMOS Configuration:
+---------+-----------+-------+------+---------+-----------+
| Model | Cylinders | Heads | Wp | Sectors | Capacity |
| Number | | | & LZ | | |
+---------+-----------+-------+------+---------+-----------+
| 83209A5 | 6,218 | 16 | 0 | 63 | 3,209 MB |
+---------+-----------+-------+------+---------+-----------+


83209A5 is a
trademarks of Maxtor Corporation
AT is a registered trademark of IBM Corporation
Specifications subject to change without notice
Copyright 1996 Maxtor Corporation
Rev A 5/30/97 T. Gilmer



Se provo ad eliminare il file IDE.EXE mi dice che non si può perchè è in esecuzione......
cosa devo fare per toglierlo?
Ciao e grazie.

[wizard1993]

Originariamente inviato da controguerra

Ragazzi mi sono ritrovato un file di nome IDE.EXE
Ogni volta che riavvio il pc il desktop mi si riempie di file di testo che aprendoli mi da:


===================================================================
Maxtor's Diamond Max OEM Drive
3.5&quot; EIDE Drives Model Numbers
83209A5
===================================================================

KEY FEATURES:
* 10 ms average seek * ATA-3 Compliant
* Low power consumption * PIO mode 4 / DMA 2 interface
* ATA power saving commands * Zone density recording
* Supports EPA Energy star * S.M.A.R.T. Capability
standards (Green PC friendly) * Superior data throughput
* >500,000 hours MTBF * 256k Cache with MaxCache manager
Algorithms
SPECIFICATIONS:
+---------+-----------+---------+-----------+--------------+
| Model | Capacity | Disks | Surfaces | Sectors per |
| Number | | | & Heads | Drive |
+---------+-----------+---------+-----------+--------------+
| 83209A5 | 3,209 MB | 3 | 5 | 6,267,744 |
+---------+-----------+---------+-----------+--------------+



Bytes per block :........................... 512
Integrated Controller/Interface: ........... ATA-3
Actuator type: ............................. Rotary Voice Coil
Data Zones per Surface: .................... 16
Servo: ..................................... Embedded
Tracks Per surface: ........................ 6,569 Clyinders
Track Density: ............................. 6,461 tpi
Flux Density: .............................. 155.0 kfci
Recording Density: ......................... 137.8 kbpi
Encoding Method: ........................... RLL 8,9
Buffer Size: ............................... 256 k
Interleave: ................................ 1:1

PERFORMANCE:
Seek performance (including settling time and servo overhead)

Seek times :
Track to track: ....................... 1 ms
Average: .............................. 10 ms
Maximum: .............................. 21 ms

Spindle speed (+-0.1%): .................... 5,400 RPM
Average latency: ........................... 5.56 ms
Controller overhead: ....................... 0.5 ms

Data transfer rate:
To/From Media: ........................... 8 - 13.42 MBs
To/from Host (without I/O CHRDY): ........ PIO Mode 3, 11.1 MBs
To/from Host (with I/O CHRDY): ........... PIO Mode 4, 16.7 MBs
DMA Transfers ............................ Mode 2, 16.7 MBs

Start time (0 - Drive Ready)
Average .................................. <= 20.0 sec
Stop Time/Power Down:
Average .................................. <= 5.0 sec

Power Requirements(Average)

Mode +12VDC +-8% +5VDC +-5% Power/Duration
---- ----------- ---------- --------------
Active 260 mA 420 mA 5.00 W
Idle 260 mA 250 mA 4.50 W
Read/Write 260 mA 450 mA 5.30 W
Spin-up 1100 mA 450 mA 12.4 W
Sleep 2.00 mA 115 mA 0.60 W
Standby 2.00 mA 154 mA 0.80 W


Power Mode Definitions:
-----------------------
Active The drive is spinning and most circuitry is powered on.
The drive is capable of responding to read commands in
the shortest possible time. Read/Write heads are positioned
over the data area.

Idle The drive is spinning., the actuator is parked and powered
off, and all other circuitry is powered on. The drive is
capable of responding to read commands within 40 ms.

Read/Write Data is being read from or written to the drive.

Spin-up The drive is spinning up following initial application
of power and has yet not reached full speed. Maximum
current draw lasts one second.

Sleep This is the lowest power state. The interface becomes
inactive. A software or hardware reset is required to
return the drive to Standby.

Standby The spin motor is not spinning. The drive will leave this
mode upon receipt of a command that requires disk access.
The time-out value for this mode is programmable. The
buffer is active to accept write data.




Physical:

Height: 1.00" 25.4 mm
Length: 5.75" 146.1 mm
Width: 4.00" 101.6 mm
Weight: 1.2 lb. 0.5 kg

Environmental:

Temperature
Operating (stabilized).................. 5 C to 55 C
Non-operating/Storage .................. -40 C to 71 C
MIL-STD-810E Method 501.3
Humidity
Operating .............................. 5% to 95% non-condensing
Non-operating/Storage .................. 5% to 95% non-condensing

Wet Bulb ................................... 27 C Maximum

Altitude (relative to sea level)
Operating .............................. -200 to 10,000 feet
Non-operating .......................... MIL-STD-810E Method 500.3

Reliability and Maintenance:

MTBF ................................... >500,000 hours
AFR .................................... <=1.7%
Preventative Maintenance ............... None
Component design life .................. 5 years (minimum)
Error Rate ............................. <1 per 10^13 bits read
Start/Stop Cycles....................... >50,000
Quality Acceptance Rate ................ 99.5% (<1,500 DPPM)

Shock & Vibration (typical):

Operating Shock ........................ 20 Gs, 2ms (no errors)
Non-Operating Shock .................... 150 Gs, 2ms (no damage)

Operating Vibration (without non-recoverable errors)
Per MIL-STD-810E Method 514.4
10Hz ................................. 0.0125 G^2/Hz
40Hz ................................. 0.0125 G^2/Hz
500Hz ................................. 0.000125 G^2/hz

Per MIL-STD-810E Method 514.4
Non-operating Vibration (without non-recoverable errors)
10Hz ................................. 0.015 G^2/Hz
40Hz ................................. 0.015 G^2/Hz
500Hz ................................. 0.00015 G^2/Hz

Operating Swept Sine Vibration (1 octave/minute)
5-20 Hz .............................. 0.049" (double amplitude)
21-300 Hz ............................ 1.0 G peak amplitude

Acoustic Noise:
Sound power (per ISO 7779) ............. 36 dBA (typical)


JUMPER DESIGNATION
|J50|J48|J46|J44|J42|
+-------------------------------------+---+---+---+---+---+
| Master/Slave | | | | | |
| Only Drive in single drive system* | J | | | | |
| Master in a dual drive system* | J | | | | |
| Slave in a dual drive system | 0 | | | | |
+-------------------------------------+---+---+---+---+---+
| Cable Select | | | | | |
| Disabled* | | O | | | |
| Enabled | | J | | | |
+-------------------------------------+---+---+---+---+---+
| 4092 Cylinder Option | | | | | |
| Disabled* | | | O | | |
| Enabled | | | J | | |
+-------------------------------------+---+---+---+---+---+
| Factory Reserved | | | | O | |
+-------------------------------------+---+---+---+---+---+
| Factory Reserved | | | | | O |
+-------------------------------------+---+---+---+---+---+

J=Jumpered O=Open *=Default
Pin 1
J1 IDE Connector | J2 Power
___________ ________|_________________________
| .................... || @ * * o |/ \
| .......... ......... || @ o o o o || O O O O |
|______________________||___________||_________|
| | | | | | | | |
| | | | | | | | |
J50 Master/Slave -----' | | | | | | | `-+12V (Yellow)
J48 Cable Select -------' | | | | | `---+12V Return (Black)
J46 4092 Cyl Limitation---' | | | `----- +5V Return (Black)
J44 Factory Reserved -------' | `------- +5V (Red)
J42 Factory Reserved ---------'

@ = Default Jumped Positions
* = "Spare" Jumper Position
o = Default Open Positions




CMOS Configuration:
+---------+-----------+-------+------+---------+-----------+
| Model | Cylinders | Heads | Wp | Sectors | Capacity |
| Number | | | & LZ | | |
+---------+-----------+-------+------+---------+-----------+
| 83209A5 | 6,218 | 16 | 0 | 63 | 3,209 MB |
+---------+-----------+-------+------+---------+-----------+


83209A5 is a
trademarks of Maxtor Corporation
AT is a registered trademark of IBM Corporation
Specifications subject to change without notice
Copyright 1996 Maxtor Corporation
Rev A 5/30/97 T. Gilmer



Se provo ad eliminare il file IDE.EXE mi dice che non si può perchè è in esecuzione......
cosa devo fare per toglierlo?
Ciao e grazie.

è una utility della maxtor perchè vuoi debellarla?

[controguerra]

Perchè ogni volta che riavvio il pc, il desktop mi si riempie di file di testo.....

[wizard1993]

Originariamente inviato da controguerra

Perchè ogni volta che riavvio il pc, il desktop mi si riempie di file di testo.....

disabilitane l'avvio in msconfig; nella scheda avvio togli il segno di spunta al processo; applichi e riavvi. per avviare msconfig fa start/esegui/msconfig

[controguerra]

Originariamente inviato da wizard1993

disabilitane l'avvio in msconfig; nella scheda avvio togli il segno di spunta al processo; applichi e riavvi. per avviare msconfig fa start/esegui/msconfig

Ok, grazie. Speriamo di riuscire a capire quale sia.

[wizard1993]

Originariamente inviato da controguerra

Ok, grazie. Speriamo di riuscire a capire quale sia.

c'è scritto