|
|||||||
|
|
|
 |
|
|
Strumenti |
10-07-2005, 16:43
|
#1 |
|
Senior Member
Iscritto dal: Oct 2000
Città: Roma
Messaggi: 1587
|
qualche aiutino, kernel e divx...
ciao, sono approdato dopo varie distribuzioni alla suse 9.3.
tutto bene, mi riconosce la scheda wifi ma ho un paio di problemi. il primo credo sia il più stupido: non riesco a vedere i divx, che devo fare? che codec devo scaricare? da dove? c'è una procedura particolare? il secondo problema è unpo' più particolare, ho letto che devo ricompilare il kernel per far funzionare l'acpi ma non ho assolutamente idea di cosa devo fare... qualcuno sa aiutarmi? vi ringrazio ciao 
|
|
|
|
10-07-2005, 16:47
|
#2 | ||
|
Senior Member
Iscritto dal: Apr 2000
Città: Roma
Messaggi: 15625
|
Quote:
Io quando installo una distro, installo a parte ffmpeg, mplayer e xine direttamente dai sorgenti. E' ciò che ti serve per leggere di tutto. Quote:
E' probabile che l'acpi del tuo computer sia attivo e funzionante. Se alleghi l'output del comando dmesg posso essere più preciso.
__________________
0: or %edi, %ecx; adc %eax, (%edx); popf; je 0b-22; pop %ebx; fadds 0x56(%ecx); lds 0x56(%ebx), %esp; mov %al, %al andeqs pc, r1, #147456; blpl 0xff8dd280; ldrgtb r4, [r6, #-472]; addgt r5, r8, r3, ror #12 |
||
|
|
|
|
10-07-2005, 16:54
|
#3 |
|
Senior Member
Iscritto dal: Oct 2000
Città: Roma
Messaggi: 1587
|
ciao, non so se sia abilitato o meno, cmq quando vado a bateria non ho alcun indicatore e nel centro di controllo midice che l'acpi non è installato...
questo è l'output del comando che mi hai detto (è un po' lunghino....): Linux version 2.6.11.4-21.7-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Thu Jun 2 14:23:14 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data) BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 495MB LOWMEM available. On node 0 totalpages: 126960 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 122864 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Allocating PCI resources starting at 1f000000 (gap: 1f000000:e0b80000) Built 1 zonelists Kernel command line: root=/dev/hda7 vga=0x317 selinux=0 splash=silent acpi=off resume=/dev/hda6 bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1499.043 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 498356k/507840k available (1866k kernel code, 8856k reserved, 658k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2965.50 BogoMIPS (lpj=1482752) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1331k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xe97e4, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Via IRQ fixup PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24cc] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1d.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:01:04.0 PCI: IRQ 0 for device 0000:00:1d.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:00:1d.2 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 5 for device 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.6 TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1121015017.099:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xb0000000, mapped to 0xdf880000, using 6144k, total 16192k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 57135 bytes,<6>...found (1024x768, 36789 bytes, v3). Console: switching to colour frame buffer device 127x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: No PS/2 controller found. Probing ports directly. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PCI: Found IRQ 5 for device 0000:00:1f.6 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 PM: Checking swsusp image. PM: Resume from disk failed. Freeing unused kernel memory: 204k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: setting IRQ 10 as level-triggered PCI: Assigned IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:00:1d.2 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda  MA, hdb ioide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc MA, hddioProbing IDE interface ide0... hda: ST960821A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Slimtype DVDRW SOSW-852S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 37 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 Attempting manual resume PM: Checking swsusp image. swsusp: Suspend partition has wrong signature? PM: Resume from disk failed. psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 37 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode reiserfs: using flush barriers ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Adding 1004020k swap on /dev/hda6. Priority:42 extents:1 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. SCSI subsystem initialized Capability LSM initialized ieee1394: Initialized config rom entry `ip1394' ieee1394: raw1394: /dev/raw1394 device initialized ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org> PCI: Found IRQ 11 for device 0000:01:00.0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0001800-e0001fff] Max Packet=[2048] video1394: Installed video1394 module parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f536740252e] usbcore: registered new driver usbfs usbcore: registered new driver hub load_module: err 0xffffffef (dont worry) Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Maximum main memory to use for agp memory: 424M agpgart: Detected 16252K stolen memory. agpgart: AGP aperture is 128M @ 0xb0000000 Linux Kernel Card Services options: [pci] [cardbus] [pm] USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:01:04.0 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 0x1200 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: IRQ 0 for device 0000:00:1d.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Assigned IRQ 10 for device 0000:00:1d.1 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 10, io base 0x1600 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:00:1f.1 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 10, io base 0x1700 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected load_module: err 0xffffffef (dont worry) load_module: err 0xffffffef (dont worry) load_module: err 0xffffffef (dont worry) PCI: Found IRQ 11 for device 0000:01:04.0 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 Yenta: CardBus bridge found at 0000:01:04.0 [1025:0071] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46 Yenta: ISA IRQ mask 0x0010, PCI irq 11 Socket status: 30000006 PCI: Found IRQ 5 for device 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.6 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ieee80211_crypt: unsupported module, tainting kernel. ieee80211_crypt: registered algorithm 'NULL' ieee80211: unsupported module, tainting kernel. 8139too Fast Ethernet driver 0.9.27 ipw2200: unsupported module, tainting kernel. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1 ipw2200: Copyright(c) 2003-2004 Intel Corporation intel8x0_measure_ac97_clock: measured 52203 usecs intel8x0: clocking to 48000 PCI: Found IRQ 10 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xf0080000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected PCI: Found IRQ 11 for device 0000:01:01.0 eth0: RealTek RTL8139 at 0xe0244000, 00:0f:b0:60:37:28, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' PCI: Found IRQ 11 for device 0000:01:02.0 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection st: Version 20041025, fixed bufsize 32768, s/g segs 256 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found cdrom: open failed. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: excluding 0x230-0x237 cs: IO port probe 0xa00-0xaff: clean. eth0: link down spurious 8259A interrupt: IRQ7. NET: Registered protocol family 17 mtrr: 0xb0000000,0x8000000 overlaps existing 0xb0000000,0x800000 ieee80211_crypt_wep: unsupported module, tainting kernel. ieee80211_crypt: registered algorithm 'WEP' Non-volatile memory driver v1.2 NET: Registered protocol family 10 Disabled Privacy Extensions on device c033d600(lo) IPv6 over IPv4 tunneling driver Disabled Privacy Extensions on device dcb14c00(sit0) powernow: This module only works with AMD K7 CPUs drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 eth0: no IPv6 routers present eth1: no IPv6 routers present ieee80211_crypt_tkip: unsupported module, tainting kernel. ieee80211_crypt: registered algorithm 'TKIP' ieee80211_crypt_ccmp: unsupported module, tainting kernel. ieee80211_crypt: registered algorithm 'CCMP' CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 ip_tables: (C) 2000-2002 Netfilter core team CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 eth0: link down eth0: no IPv6 routers present eth1: no IPv6 routers present CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 eth0: link down eth0: no IPv6 routers present eth1: no IPv6 routers present CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 eth0: link down eth0: no IPv6 routers present eth1: no IPv6 routers present atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 3 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 5 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 6 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 4 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 5 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 4 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 5 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 3 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 3 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 3 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 1 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 printk: 2 messages suppressed. CCMP: received packet without ExtIV flag from 00:0f:b5:b1:38:a4 eth0: link down eth0: no IPv6 routers present eth1: no IPv6 routers present |
|
|
|
|
10-07-2005, 17:00
|
#4 | |
|
Senior Member
Iscritto dal: Apr 2000
Città: Roma
Messaggi: 15625
|
Ah ecco, è ovvio:
Quote:
Puoi tranquillamente provare ad abilitarlo e a vedere come va; se qualcosa non funziona puoi sempre disabilitarlo.
__________________
0: or %edi, %ecx; adc %eax, (%edx); popf; je 0b-22; pop %ebx; fadds 0x56(%ecx); lds 0x56(%ebx), %esp; mov %al, %al andeqs pc, r1, #147456; blpl 0xff8dd280; ldrgtb r4, [r6, #-472]; addgt r5, r8, r3, ror #12 |
|
|
|
|
|
10-07-2005, 17:56
|
#5 | |
|
Senior Member
Iscritto dal: Oct 2000
Città: Roma
Messaggi: 1587
|
Quote:
da dove posso abilitarlo, devo editare qualche file? mi potresti spiegare? ti ringrazio
|
|
|
|
|
|
10-07-2005, 18:32
|
#6 |
|
Senior Member
Iscritto dal: Jun 2003
Città: Genova
Messaggi: 5676
|
se usi lilo apri /etc/lilo.conf e dalla voce append togli acpi=off
se usi grub invece dovrebbe essere /boot/grub/menu.lst. stessa cosa. cerchi acpi=off e lo detoni. se ti da problemi in avvio allora al bootloader scrivi acpi=off e parti risistemi tutto come prima. ciao |
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 14:29.
