driver audio su mandrake 9.2

[lovaz]

Originariamente inviato da leon84
Può essere che ora il comando va perché mi sono loggato come "luigi" ? Ma forse no ... in fondo root è sempre root

Le 3 'r' che hai visto nell'ls di prima indicano che il file e' leggibile da tutti.
Comunque prova anche cat /proc/iomem, le sto provando tutte

[leon84]

Eccoti anche questo :

[luigi@localhost luigi]$ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1f73ffff : System RAM
001c0000-00339363 : Kernel code
1f740000-1f74ffff : ACPI Tables
1f750000-1f7fffff : ACPI Non-volatile Storage
1f800000-1f8003ff : Intel Corp. 82801DBM Ultra ATA Storage Controller
1f800400-1f8005ff : Intel Corp. 82801DB AC'97 Audio Controller
1f800600-1f8006ff : Intel Corp. 82801DB AC'97 Audio Controller
1f801000-1f801fff : Ricoh Co Ltd RL5c475
1fc00000-1fffffff : PCI CardBus #02
20000000-203fffff : PCI CardBus #02
e8000000-efffffff : Intel Corp. 82852/855GM Integrated Graphics Device (#2)
f0000000-f7ffffff : Intel Corp. 82852/855GM Integrated Graphics Device
f0000000-f01d4bff : vesafb
ff7fd000-ff7fdfff : Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter
ff7fe800-ff7fefff : Ricoh Co Ltd R5C551 IEEE 1394 Controller
ff7fe800-ff7fefff : ohci1394
ff7ff000-ff7fffff : Intel Corp. 82801BD PRO/100 VM (MOB) Ethernet Controller
ff7ff000-ff7fffff : eepro100
ff980000-ff9fffff : Intel Corp. 82852/855GM Integrated Graphics Device (#2)
ffa7fc00-ffa7ffff : Intel Corp. 82801DB USB2
ffa7fc00-ffa7ffff : ehci_hcd
ffa80000-ffafffff : Intel Corp. 82852/855GM Integrated Graphics Device

[lovaz]

Prova ancora
modprobe snd-intel8x0
e poi posta
dmesg |tail

non so piu' dove andare a parare

[leon84]

Fatto ma continuo a visualizzare il seguente messaggio :

[root@localhost root]# modprobe snd-intel8x0
/lib/modules/2.4.22-10mdk/kernel/sound/pci/snd-intel8x0.o.gz: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.22-10mdk/kernel/sound/pci/snd-intel8x0.o.gz failed
modprobe: insmod snd-intel8x0 failed

[lovaz]

infatti mi interessava questo
dmesg |tail
subito dopo il modprobe

[leon84]

Originariamente inviato da lovaz
infatti mi interessava questo
dmesg |tail
subito dopo il modprobe

Questo è quello che ottengo digitanto solo "dmesg" :

[root@localhost root]# dmesg
.
Console: colour dummy device 80x25
Calibrating delay loop... 2994.99 BogoMIPS
Memory: 505840k/515328k available (1508k kernel code, 9100k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000
CPU: Common caps: a7e9fbbf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1500.1006 MHz.
..... host bus clock speed is 100.0065 MHz.
cpu: 0, clocks: 1000065, slice: 500032
CPU0<T0:1000064,T1:500032,D:0,S:500032,C:1000065>
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router default [8086/24cc] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xf0000000, mapped to 0xe0000000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 107888 bytes, found (800x600, 107840 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using pci=biosirq.
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
hda: IC25N040ATCS04-0, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=77520/16/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [4864/255/63] p1 p2 p3 < p5 p6 p7 p8 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Swsusp 1.0.3: Missing or invalid swap partition location (resume= parameter). Disabled.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 300k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Got silent jpeg.
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 12:42:04 Sep 18 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xd480, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd880, IRQ 4
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 00:1d.7: irq 4, pci mem e0275c00
usb.c: new USB bus registered, assigned bus number 4
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 32.
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Adding Swap: 506008k swap-space (priority -1)
hub.c: connect-debounce failed, port 1 disabled
hub.c: new USB device 00:1d.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
hub.c: new USB device 00:1d.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x5a9/0x518) is not claimed by any active driver.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: QSI Model: CDRW/DVD SBW-242 Rev: UX02
Type: CD-ROM ANSI SCSI revision: 02
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
Linux video capture interface: v1.00
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
i2c-core.o: i2c core module version 2.8.0 (20030714)
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver ov511
ov511_core.c: USB OV518 video device found
ov511_core.c: Device revision 1
ov511_core.c: Compression required with OV518...enabling
NTFS volume version 3.1.
ov511_core.c: Device at usb-00:1d.1-1 registered to minor 0
ov511_core.c: v2.25 : ov511 USB Camera Driver (V4L2 disabled)
ohci1394: $Rev$ Ben Collins <[email protected]>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[ff7fe800-ff7fefff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800030d03dc]
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
eth0: Intel Corp. 82801BD PRO/100 VM (MOB) Ethernet Controller, 00:0C:6E:8B:03:4E, IRQ 11.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
inserting floppy driver for 2.4.22-10mdk
floppy0: no floppy controllers found
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
sr0: mmc-3 profile capable, current profile: 9h
Uniform CD-ROM driver Revision: 3.12
sr0: mmc-3 profile: 9h
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
PCI: No IRQ known for interrupt pin A of device 01:05.0. Please try using pci=biosirq.
Yenta IRQ list 0288, PCI irq0
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Installing knfsd (copyright (C) 1996 [email protected]).
PCI: Enabling device 00:1f.5 (0005 -> 0007)
PCI: No IRQ known for interrupt pin B of device 00:1f.5. Please try using pci=biosirq.
unable to grab IRQ 0
Intel ICH soundcard not found or device busy
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected an Intel(R) 855GM Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
memory : df10ebe0
memory : df10ec20
memory : df10ec60
memory : df10eca0
[drm] AGP 0.99 Aperture @ 0xf0000000 128MB
[drm] Initialized i830 1.3.2 20021108 on minor 0
mtrr: base(0xf0000000) is not aligned on a size(0x180000) boundary
memory : df10ed20
memory : df10ed60
memory : df10eda0
memory : df10ede0
memory : df10ee20
ov511_core.c: No sensor is detected yet
ov511_core.c: No sensor is detected yet
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 5 changed to on
ov511_core.c: No sensor is detected yet
memory : df10ec20
memory : df10ec60
memory : df10eca0
memory : df10ed20
mtrr: base(0xf0000000) is not aligned on a size(0x180000) boundary
memory : df10eda0
memory : df10ede0
memory : df10ee20
memory : df10ece0
memory : df10ee60
ov511_core.c: No sensor is detected yet
ov511_core.c: No sensor is detected yet
usb.c: USB disconnect on device 00:1d.1-1 address 2
hub.c: new USB device 00:1d.0-2, assigned address 3
ov511_core.c: USB OV518 video device found
ov511_core.c: Device revision 1
ov511_core.c: Compression required with OV518...enabling
ov511_core.c: Device at usb-00:1d.0-2 registered to minor 0
udf: registering filesystem
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG super.c:1420:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:413:udf_vrs: Starting at sector 16 (2048 byte sectors)
I/O error: dev 0b:00, sector 64
UDF-fs DEBUG super.c:1160:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
I/O error: dev 0b:00, sector 1293760
I/O error: dev 0b:00, sector 1292736
I/O error: dev 0b:00, sector 1292512
I/O error: dev 0b:00, sector 1293752
I/O error: dev 0b:00, sector 1292728
I/O error: dev 0b:00, sector 1292504
I/O error: dev 0b:00, sector 1293160
I/O error: dev 0b:00, sector 1292136
I/O error: dev 0b:00, sector 1291912
I/O error: dev 0b:00, sector 1293152
I/O error: dev 0b:00, sector 1292128
I/O error: dev 0b:00, sector 1291904
I/O error: dev 0b:00, sector 1061556
I/O error: dev 0b:00, sector 1060532
I/O error: dev 0b:00, sector 1060308
I/O error: dev 0b:00, sector 1061548
I/O error: dev 0b:00, sector 1060524
I/O error: dev 0b:00, sector 1060300
I/O error: dev 0b:00, sector 1060956
I/O error: dev 0b:00, sector 1059932
I/O error: dev 0b:00, sector 1059708
I/O error: dev 0b:00, sector 1060948
I/O error: dev 0b:00, sector 1059924
I/O error: dev 0b:00, sector 1059700
I/O error: dev 0b:00, sector 1248
I/O error: dev 0b:00, sector 1024
UDF-fs DEBUG misc.c:224:udf_read_tagged: block=256, location=256: read failed
UDF-fs DEBUG super.c:1214:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=16
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG super.c:1420:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:413:udf_vrs: Starting at sector 16 (2048 byte sectors)
I/O error: dev 0b:00, sector 64
UDF-fs DEBUG super.c:1160:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
I/O error: dev 0b:00, sector 1293760
I/O error: dev 0b:00, sector 1292736
I/O error: dev 0b:00, sector 1292512
I/O error: dev 0b:00, sector 1293752
I/O error: dev 0b:00, sector 1292728
I/O error: dev 0b:00, sector 1292504
I/O error: dev 0b:00, sector 1293160
I/O error: dev 0b:00, sector 1292136
I/O error: dev 0b:00, sector 1291912
I/O error: dev 0b:00, sector 1293152
I/O error: dev 0b:00, sector 1292128
I/O error: dev 0b:00, sector 1291904
I/O error: dev 0b:00, sector 1061556
I/O error: dev 0b:00, sector 1060532
I/O error: dev 0b:00, sector 1060308
I/O error: dev 0b:00, sector 1061548
I/O error: dev 0b:00, sector 1060524
I/O error: dev 0b:00, sector 1060300
I/O error: dev 0b:00, sector 1060956
I/O error: dev 0b:00, sector 1059932
I/O error: dev 0b:00, sector 1059708
I/O error: dev 0b:00, sector 1060948
I/O error: dev 0b:00, sector 1059924
I/O error: dev 0b:00, sector 1059700
I/O error: dev 0b:00, sector 1248
I/O error: dev 0b:00, sector 1024
UDF-fs DEBUG misc.c:224:udf_read_tagged: block=256, location=256: read failed
UDF-fs DEBUG super.c:1214:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=16
memory : df10ec60
memory : df10eca0
memory : df10ed20
memory : df10eda0
mtrr: base(0xf0000000) is not aligned on a size(0x180000) boundary
memory : df10ee20
memory : df10ece0
memory : df10ee60
memory : df10ed60
memory : df10eae0
ov511_core.c: No sensor is detected yet
ov511_core.c: No sensor is detected yet
PCI: No IRQ known for interrupt pin B of device 00:1f.5. Please try using pci=biosirq.
unable to grab IRQ 0
Intel ICH soundcard not found or device busy


tail dmesg non mi va ....

[lovaz]

Si', avevo sbagliato...
posta
/sbin/lspci
poi non so piu' che dire

[leon84]

Originariamente inviato da lovaz
Si', avevo sbagliato...
posta
/sbin/lspci
poi non so piu' che dire

spiacente ma non mi va

[lovaz]

Impossibile che non vada
hai scritto bene?
/sbin/lspci

[leon84]

spiacente ma nulla da fare : mi visualizza il seguente messaggio :

[root@localhost root]# /sbin/lspci
bash: /sbin/lspci: No such file or directory

[lovaz]

Questa e' buona
boh, allora prova
cat /proc/pci
(questo dovrebbe esserci)

[leon84]

Originariamente inviato da lovaz
Questa e' buona
boh, allora prova
cat /proc/pci
(questo dovrebbe esserci)

Si ok così va ... eccoti il risultato :

[root@localhost root]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 2).
Bus 0, device 0, function 1:
System peripheral: PCI device 8086:3584 (Intel Corp.) (rev 2).
Bus 0, device 0, function 3:
System peripheral: PCI device 8086:3585 (Intel Corp.) (rev 2).
Bus 0, device 2, function 0:
VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 2).
IRQ 11.
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Non-prefetchable 32 bit memory at 0xffa80000 [0xffafffff].
I/O at 0xdc00 [0xdc07].
Bus 0, device 2, function 1:
Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (#2) (rev 2).
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
Non-prefetchable 32 bit memory at 0xff980000 [0xff9fffff].
Bus 0, device 29, function 0:
USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 3).
IRQ 11.
I/O at 0xd480 [0xd49f].
Bus 0, device 29, function 1:
USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 3).
IRQ 5.
I/O at 0xd800 [0xd81f].
Bus 0, device 29, function 2:
USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 3).
IRQ 4.
I/O at 0xd880 [0xd89f].
Bus 0, device 29, function 7:
USB Controller: Intel Corp. 82801DB USB2 (rev 3).
IRQ 4.
Non-prefetchable 32 bit memory at 0xffa7fc00 [0xffa7ffff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 131).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 3).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 3).
I/O at 0xffa0 [0xffaf].
Non-prefetchable 32 bit memory at 0x1f800000 [0x1f8003ff].
Bus 0, device 31, function 5:
Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 3).
I/O at 0xe000 [0xe0ff].
I/O at 0xe100 [0xe13f].
Non-prefetchable 32 bit memory at 0x1f800400 [0x1f8005ff].
Non-prefetchable 32 bit memory at 0x1f800600 [0x1f8006ff].
Bus 0, device 31, function 6:
Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 3).
I/O at 0xe200 [0xe2ff].
I/O at 0xe300 [0xe37f].
Bus 1, device 4, function 0:
Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 4).
IRQ 4.
Master Capable. Latency=64. Min Gnt=2.Max Lat=34.
Non-prefetchable 32 bit memory at 0xff7fd000 [0xff7fdfff].
Bus 1, device 5, function 0:
CardBus bridge: Ricoh Co Ltd RL5c475 (rev 184).
Master Capable. Latency=168. Max Lat=5.
Non-prefetchable 32 bit memory at 0x1f801000 [0x1f801fff].
Bus 1, device 5, function 1:
FireWire (IEEE 1394): Ricoh Co Ltd R5C551 IEEE 1394 Controller (rev 0).
IRQ 11.
Master Capable. Latency=64. Min Gnt=2.Max Lat=4.
Non-prefetchable 32 bit memory at 0xff7fe800 [0xff7fefff].
Bus 1, device 8, function 0:
Ethernet controller: Intel Corp. 82801BD PRO/100 VM (MOB) Ethernet Controller (rev 131).
IRQ 11.
Master Capable. Latency=64. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xff7ff000 [0xff7fffff].
I/O at 0xcc00 [0xcc3f].

[leon84]

ci sei? non riesco proprio a risolvere questo problema...

[lovaz]

Prova ad avviare con l'opzione
pci=biosirq

devi premere esc all'avvio e poi scrivere linux pci=biosirq