|
|||||||
|
|
|
 |
|
|
Strumenti |
05-07-2010, 18:19
|
#1 |
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
errore avvio BIOS
Ciao!
Quando accendo il computer, al momento del caricamento del BIOS compare questo messaggio di errore: "Dual-Channel operation required identical paired DIMMs installed across both memory channels. BIOS has detecred a non-optional memory configuration. Changhing the existing DIMM configurazion cam improve the system's memory bus bandwith: Channel A, DIMM 0 should match Channel B, DIMM 0 CHANNEL A, DIMM 1 should match Channel B, DIMM 1 CMOS/GPNU Checksum Bad CMOS DATE/TIME not set Press <F4> to Run SETUP" Foto: http://img816.imageshack.us/f/p7040067.jpg/ Come mai? Inoltre: Ogni qualvolta viene visualizzato il messaggio sopra citato, l'ora e la data di sistema si resettano. Riesco a far partire il SO se riavvio la macchina, ma al suo spegnimento successivo, il messaggio di errore si ripresenta. Grazie anticipatamente |
|
|
|
05-07-2010, 18:58
|
#2 | |
|
Senior Member
Iscritto dal: Dec 2009
Città: Pavia
Messaggi: 426
|
Quote:
Sembra quasi che hai, p.es., 2 banchi da 1GB e due da 512MB mischiati sul dual channel (1GB+512MB/1GB+512MB anzichè 1GB+1GB/512MB+512MB). Il messaggio ti è apparso senza aver fatto modifiche hardware?
__________________
Assemblato: ALI>CHIEFTEC APS-450S - MOBO>GigaByte GA-P43-ES3G rev.1.0 - CPU>Intel E6300 - RAM>Kingston KVR800D2N5_1G x4 - HD>WD Caviar Black 1000GB (WinXPpro/software)+MAXXTRO 160GB (dati) - GPU>GF 9500GT Super+1024MB |
|
|
|
|
|
05-07-2010, 19:31
|
#3 | ||
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
Quote:
Quote:
Comunque so per certo di avere 2 banchi ram da 512 mb. Serve che faccio una foto dove sono posizionate le ram all'interno del case del pc ? |
||
|
|
|
|
05-07-2010, 19:34
|
#4 |
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
Questo è il risultato del comando lshw dato su terminale linux che mostra le caratteristiche hardware del pc:
Codice:
description: Computer
product: Springdale-G
width: 32 bits
capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
configuration: boot=normal cpus=1 uuid=6868DCE5-26A2-11D9-85D6-00E0188FF8F4
*-core
description: Motherboard
product: D865PERL
vendor: Intel Corporation
physical id: 0
version: AAC27648-211
serial: BTRL44314258
*-firmware
description: BIOS
vendor: Intel Corp.
physical id: 0
version: RL86510A.86A.0075.P15.0404021333 (04/02/2004)
size: 64KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 3.20GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 15.3.4
serial: 0000-0F34-0000-0000-0000-0000
slot: J2E1
size: 3200MHz
capacity: 3200MHz
width: 32 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid xtpr
configuration: id=0
*-cache:0 DISABLED
description: L1 cache
physical id: 5
slot: None
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: None
size: 1MiB
capacity: 1MiB
capabilities: pipeline-burst internal varies unified
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 32 bits
capabilities: logical
*-memory
description: System Memory
physical id: 3d
slot: System board or motherboard
size: 1GiB
*-bank:0
description: DIMM DDR Synchronous 320 MHz (3.1 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 0
serial: SerNum1
slot: J5G1
size: 512MiB
width: 64 bits
clock: 320MHz (3.1ns)
*-bank:1
description: DIMM DDR Synchronous 320 MHz (3.1 ns)
product: PartNum2
vendor: Manufacturer2
physical id: 1
serial: SerNum2
slot: J5G2
size: 512MiB
width: 64 bits
clock: 320MHz (3.1ns)
*-bank:2
description: DIMM DDR Synchronous 320 MHz (3.1 ns) [empty]
product: PartNum3
vendor: Manufacturer3
physical id: 2
serial: SerNum3
slot: J5H1
width: 64 bits
clock: 320MHz (3.1ns)
*-bank:3
description: DIMM DDR Synchronous 320 MHz (3.1 ns) [empty]
product: PartNum4
vendor: Manufacturer4
physical id: 3
serial: SerNum4
slot: J5H2
width: 64 bits
clock: 320MHz (3.1ns)
*-pci
description: Host bridge
product: 82865G/PE/P DRAM Controller/Host-Hub Interface
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel module=intel_agp
*-pci:0
description: PCI bridge
product: 82865G/PE/P PCI to AGP Controller
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
*-display:0 UNCLAIMED
description: VGA compatible controller
product: Radeon RV250 If [Radeon 9000]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@0000:01:00.0
version: 01
width: 32 bits
clock: 66MHz
capabilities: agp agp-2.0 pm bus_master cap_list
configuration: latency=32 mingnt=8
*-display:1 UNCLAIMED
description: Display controller
product: Radeon RV250 [Radeon 9000] (Secondary)
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@0000:01:00.1
version: 01
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: latency=32 mingnt=8
*-usb:0
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:1
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:2
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:3
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:4
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-pci:1
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: c2
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
*-network
description: Ethernet interface
product: 3c900B-Combo Etherlink XL [Cyclone]
vendor: 3Com Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 04
serial: 00:50:04:56:ad:0d
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=3c59x duplex=full latency=32 link=yes maxlatency=48 mingnt=10 module=3c59x multicast=yes port=MII speed=10MB/s
*-multimedia
description: Multimedia controller
product: SAA7134/SAA7135HL Video Broadcast Decoder
vendor: Philips Semiconductors
physical id: 1
bus info: pci@0000:02:01.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=saa7134 latency=32 maxlatency=248 mingnt=248 module=saa7134
*-isa
description: ISA bridge
product: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide:0
description: IDE interface
product: 82801EB/ER (ICH5/ICH5R) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
logical name: scsi0
logical name: scsi1
version: 02
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated
configuration: driver=ata_piix latency=0
*-disk:0
description: ATA Disk
product: Maxtor 6Y080L0
vendor: Maxtor
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: YAR4
serial: Y2CD0VKE
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00000001
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: 66394e34-af55-de44-b720-f0dbb8f200b3
size: 38GiB
capacity: 38GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2008-09-08 21:32:38 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
size: 38GiB
capacity: 38GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: HPFS/NTFS partition
physical id: 5
logical name: /dev/sda5
capacity: 38GiB
*-disk:1
description: ATA Disk
product: Maxtor 6Y080L0
vendor: Maxtor
physical id: 1
bus info: scsi@0:0.1.0
logical name: /dev/sdb
version: YAR4
serial: Y2NA7G9E
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=0e0718de
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.1.0,1
logical name: /dev/sdb1
version: 1.0
serial: 62d0b44c-5021-4f00-af6d-f4fc387b18d6
size: 57GiB
capacity: 61GiB
capabilities: primary extended partitioned partitioned:extended journaled extended_attributes large_files ext3 ext2 initialized
configuration: created=2009-01-31 19:46:47 filesystem=ext3 label=/ modified=2009-06-12 16:48:16 mounted=2009-06-12 16:45:18 state=clean
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/sdb5
logical name: /
capacity: 55GiB
configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted
*-logicalvolume:1
description: Linux swap / Solaris partition
physical id: 6
logical name: /dev/sdb6
capacity: 5710MiB
capabilities: nofs
*-volume:1
description: Windows FAT volume
vendor: MSWIN4.1
physical id: 4
bus info: scsi@0:0.1.0,4
logical name: /dev/sdb4
version: FAT32
serial: 36eb-0fb5
size: 14GiB
capacity: 14GiB
capabilities: primary fat initialized
configuration: FATs=2 filesystem=fat
*-cdrom:0
description: DVD-RAM writer
product: DVDRAM GSA-H10N
vendor: HL-DT-ST
physical id: 2
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
version: JL10
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-cdrom:1
description: CD-R/CD-RW writer
physical id: 3
bus info: scsi@1:0.1.0
logical name: /dev/cdrom1
logical name: /dev/cdrw1
logical name: /dev/scd1
logical name: /dev/sr1
capabilities: audio cd-r cd-rw
configuration: status=nodisc
*-ide:1
description: IDE interface
product: 82801EB (ICH5) SATA Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide bus_master
configuration: driver=ata_piix latency=0
*-serial UNCLAIMED
description: SMBus
product: 82801EB/ER (ICH5/ICH5R) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 02
width: 32 bits
clock: 33MHz
configuration: latency=0
*-multimedia
description: Multimedia audio controller
product: 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Intel ICH latency=0 module=snd_intel8x0
*-network:0 DISABLED
description: Ethernet interface
physical id: 1
logical name: vboxnet0
serial: 0a:00:27:00:00:00
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
*-network:1 DISABLED
description: Ethernet interface
physical id: 2
logical name: pan0
serial: 96:d2:89:73:70:7d
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
|
|
|
|
|
06-07-2010, 05:38
|
#5 | |
|
Senior Member
Iscritto dal: Dec 2009
Città: Pavia
Messaggi: 426
|
Quote:
__________________
Assemblato: ALI>CHIEFTEC APS-450S - MOBO>GigaByte GA-P43-ES3G rev.1.0 - CPU>Intel E6300 - RAM>Kingston KVR800D2N5_1G x4 - HD>WD Caviar Black 1000GB (WinXPpro/software)+MAXXTRO 160GB (dati) - GPU>GF 9500GT Super+1024MB Ultima modifica di Casey Jones : 06-07-2010 alle 05:45. |
|
|
|
|
|
06-07-2010, 15:24
|
#6 | |
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
Queste sono le due ram da 512mb:
http://img180.imageshack.us/i/p7060069.jpg/ Aprendo i settaggi del bios trovo questo: http://img576.imageshack.us/i/p7060078.jpg/ Devo impostare le ram come indicato da questo messaggio: Quote:
Praticamente devo inserire le 2 ram negli altri due slot liberi(quelli sopra a quelli occupati nella prima immagine)? Ultima modifica di alberto t. : 06-07-2010 alle 15:27. |
|
|
|
|
|
06-07-2010, 17:31
|
#7 |
|
Senior Member
Iscritto dal: Dec 2009
Città: Pavia
Messaggi: 426
|
Avevo inteso che avevi 4 banchi ram; scusa.
Prova a partire con un banco solo per volta.
__________________
Assemblato: ALI>CHIEFTEC APS-450S - MOBO>GigaByte GA-P43-ES3G rev.1.0 - CPU>Intel E6300 - RAM>Kingston KVR800D2N5_1G x4 - HD>WD Caviar Black 1000GB (WinXPpro/software)+MAXXTRO 160GB (dati) - GPU>GF 9500GT Super+1024MB |
|
|
|
|
06-07-2010, 18:37
|
#8 | |
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
Quote:
Codice:
CMOS/GPNU Checksum Bad CMOS DATE/TIME not set Domani cambio la batteria. |
|
|
|
|
|
06-07-2010, 19:02
|
#9 | |
|
Senior Member
Iscritto dal: Dec 2009
Città: Pavia
Messaggi: 426
|
Quote:
Ho controllato la tua foto delle ram con le istruzioni mobo: a pag 34 ti dicono come inserirle correttamente; se ne hai solo due, devono essere inserite come fig.7.
__________________
Assemblato: ALI>CHIEFTEC APS-450S - MOBO>GigaByte GA-P43-ES3G rev.1.0 - CPU>Intel E6300 - RAM>Kingston KVR800D2N5_1G x4 - HD>WD Caviar Black 1000GB (WinXPpro/software)+MAXXTRO 160GB (dati) - GPU>GF 9500GT Super+1024MB Ultima modifica di Casey Jones : 06-07-2010 alle 19:24. |
|
|
|
|
|
07-07-2010, 09:06
|
#10 | |
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
Ti riferisci a questa guida: http://downloadmirror.intel.com/1520...03_English.pdf ?
Quote:
Ultima modifica di alberto t. : 07-07-2010 alle 09:21. |
|
|
|
|
|
07-07-2010, 17:26
|
#11 | |
|
Senior Member
Iscritto dal: Dec 2009
Città: Pavia
Messaggi: 426
|
Quote:
Comincia con il posizionare correttamante le ram negli slot DIMM0 (1° e 3°) e poi cambia la batteria. Fai sapere....
__________________
Assemblato: ALI>CHIEFTEC APS-450S - MOBO>GigaByte GA-P43-ES3G rev.1.0 - CPU>Intel E6300 - RAM>Kingston KVR800D2N5_1G x4 - HD>WD Caviar Black 1000GB (WinXPpro/software)+MAXXTRO 160GB (dati) - GPU>GF 9500GT Super+1024MB |
|
|
|
|
|
07-07-2010, 19:12
|
#12 | |
|
Member
Iscritto dal: Sep 2008
Messaggi: 91
|
Quote:
Per il momento sembra funzionare. Grazie di tutto. Ciao! |
|
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 18:10.
