Aiutatemi!!!!

[neo1987]

Ho un problema con LG4120B (firmware A104) ! Con i DVD+R tutto ok! con i DVD-R succede tutto ciò: metto a bruciare il dvd e puff.... 1 secondo dopo... mi dice... scrittura fallita a 8x, stessa roba con 4x, il problema riscontrato nel log è "Illegal CD"!!! Che cosa vuol dire???

Please aiutatemi! Vi allego il file di testo con il LOG!! Ciao e grazie intanto!

winzoz
winzoz
1A21-0009-6030-1647-1880-6757
1A25-4706-7030-1366-1263-4647

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
Nero version: 6.6.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 1 TA 1 - 6.6.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.0
Adapter driver: <a347scsi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8520B D: CDRom0
HL-DT-ST DVDRAM GSA-4120 E: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 585MB (599592kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.10.2004
ISO compilation
18.31.32 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18.31.32 #2 SCSI -1065 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03666000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0C 0x20 0x00

18.31.32 #3 Text 0 File Reader.cpp, Line 127
Reader running

18.31.32 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4120B running

18.31.32 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

18.31.32 #6 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media

18.31.32 #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2178495 (484:06.45, 4254MB)
Last address to be written: 2178495 (484:06.45, 4254MB)

18.31.32 #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

18.31.32 #9 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-ROM

18.31.32 #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18.31.32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2178496 (2178496) = #2178496/484:6.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2178496 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

18.31.33 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4461559808, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 2 | 0 | 0x00 | 0x41
0 | 2 | 1 | 0x00 | 0x41
2178496 | lead-out | 1 | 0x00 | 0x41

18.31.37 #13 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started

18.31.37 #14 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.

18.31.37 #15 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed

18.31.37 #16 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 8x (11.080 KB/s)

18.31.38 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18.31.38 #18 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 6:48,211 (408211ms) -> OK

18.31.38 #19 Text 0 File DVDR.cpp, Line 1955
Recording mode: unknown Recording Mode

18.31.38 #20 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Buffer underrun protection -> ON

18.31.38 #21 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes

18.31.38 #22 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 243DBF h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18.31.38 #23 SCSI -1065 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04214000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0C 0x20 0x00

18.31.40 #24 SCSI -1046 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0C 0x30 0x05

18.31.40 #25 CDR -1046 File Writer.cpp, Line 311
Illegal disc

18.31.40 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18.31.41 #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

18.31.41 #28 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was -1

18.31.42 #29 SCSI -1065 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04214000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0C 0x20 0x00

18.31.42 #30 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

18.31.42 #31 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

18.31.42 #32 Phase 38 File dlgbrnst.cpp, Line 1861
Burn process failed at 8x (11.080 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 22.59.44 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 9.33.00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Mistral PaolinuX]

Hai provato ad usare supporti diversi ? Può trattarsi di una incompatibilità tra supporti e masterizzatore.

Paolo

[neo1987]

ma è dvd-r della tdk (certificato a 8x) !!! che faccio???

[neo1987]

up!!!!

[Mistral PaolinuX]

Prova a reinstallare il layer ASPI (vedi FAQ e guide della sezione)

Paolo

[neo1987]

ok! i driver aspi gli ho installati alla perfezione! ora provo a fare un test... speriamo bene!

ciao e grazie intanto!

[neo1987]

perfetto!!!! grazie mille!!!

come sempre... grande paolo!

ho buttato via un tdk ma ora funzia alla grande!

[Mistral PaolinuX]

Il layer ASPI colpisce ancora

Paolo

[neo1987]

ehmm...... cioè??

[Mistral PaolinuX]

Niente, è solo che mi trovo a scrivere di aggiornare/reinstallare il layer ASPI una carrettata di volte , e sono sempre contento quando a seguito delle reinstallazione tutto finisce bene. Questo, peraltro, dimostra che nonostante i miniport drivers, il layer ASPI (che ormai è bello anzianotto, se si pensa che risale ai primi CD-Readers 2x) serve ancora.

Paolo