attributi smart

iron84 · 14-11-2007, 12:14

Ho provato a dare il comando smartctl -a /dev/hda e ho ottenuto questo risultato.

Codice:

smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Maxtor DiamondMax Plus 9 family
Device Model:     Maxtor 6Y120L0
Serial Number:    Y3HV333E
Firmware Version: YAR41BW0
User Capacity:    122,942,324,736 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Wed Nov 14 13:03:03 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 242) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   202   196   063    Pre-fail  Always       -       13129
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       1412
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       5
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   250   241   187    Pre-fail  Always       -       45911
  9 Power_On_Minutes        0x0032   179   179   000    Old_age   Always       -       618h+57m
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   250   250   000    Old_age   Always       -       1517
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       40
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       11059
196 Reallocated_Event_Count 0x0008   248   248   000    Old_age   Offline      -       5
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   141   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   198   197   000    Old_age   Offline      -       2
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   215   000    Old_age   Always       -       1
202 TA_Increase_Count       0x000a   253   248   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       2
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   197   194   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 578 inconsistent with error log pointer 5

ATA Error Count: 578 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 578 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 3f c7 07 e0  Error: ICRC, ABRT at LBA = 0x0007c73f = 509759

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 3f c7 07 e0 08      00:09:13.216  READ DMA
  c8 00 c8 77 c6 07 e0 08      00:09:13.216  READ DMA
  c8 00 00 2f 09 e6 e0 08      00:09:13.200  READ DMA
  c8 00 00 e7 b4 07 e0 08      00:09:13.184  READ DMA
  c8 00 18 af 8b e8 e0 08      00:09:13.168  READ DMA

Error 577 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 27 5f e6 e0  Error: ICRC, ABRT at LBA = 0x00e65f27 = 15097639

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 c0 27 5f e6 e0 08      00:09:08.560  READ DMA
  c8 00 00 27 5e e6 e0 08      00:09:08.560  READ DMA
  c8 00 08 0f e6 90 e0 08      00:09:08.544  READ DMA
  c8 00 08 e7 7a 24 e0 08      00:09:08.528  READ DMA
  c8 00 08 c7 23 0c e0 08      00:09:08.512  READ DMA

Error 576 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 d7 c7 07 e0  Error: ICRC, ABRT at LBA = 0x0007c7d7 = 509911

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 d7 c7 07 e0 08      00:06:30.240  READ DMA
  c8 00 c0 47 31 e6 e0 08      00:06:30.240  READ DMA
  c8 00 00 47 30 e6 e0 08      00:06:30.240  READ DMA
  c8 00 c0 5f 4d c3 e0 08      00:06:30.224  READ DMA
  c8 00 40 df 4b c3 e0 08      00:06:30.224  READ DMA

Error 575 occurred at disk power-on lifetime: 3621 hours (150 days + 21 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 06 3f bb 52 e2  Error: UNC 6 sectors at LBA = 0x0252bb3f = 38976319

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 d8 08 3f bb 52 e2 00      01:28:19.904  READ DMA
  c8 d8 08 3f bb 52 e2 00      01:28:18.832  READ DMA
  c8 d8 08 37 bb 52 e2 00      01:28:18.816  READ DMA
  c8 d8 08 37 d3 51 e2 00      01:28:18.816  READ DMA
  c8 d8 08 3f d3 51 e2 00      01:28:18.816  READ DMA

Error 574 occurred at disk power-on lifetime: 3621 hours (150 days + 21 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 06 3f bb 52 e2  Error: UNC 6 sectors at LBA = 0x0252bb3f = 38976319

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 d8 08 3f bb 52 e2 00      01:28:18.832  READ DMA
  c8 d8 08 37 bb 52 e2 00      01:28:18.816  READ DMA
  c8 d8 08 37 d3 51 e2 00      01:28:18.816  READ DMA
  c8 d8 08 3f d3 51 e2 00      01:28:18.816  READ DMA
  c8 d8 08 2f d3 51 e2 00      01:28:18.816  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     24132         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Cosa sono i "ERROR" alla fine del log?

---------------------------
Invece questo sul portatile con debian etch.

Codice:

smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     FUJITSU MHV2080AT PL
Serial Number:    NSA2T6128EW3
Firmware Version: 000000A0
User Capacity:    80,026,361,856 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a
Local Time is:    Wed Nov 14 17:10:03 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 552) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  70) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always       -       31258
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail  Offline      -       28049408
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       823
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail  Always       -       8589934592000
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail  Always       -       2925
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       18475656
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       780
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       29
193 Load_Cycle_Count        0x0032   097   097   000    Old_age   Always       -       71173
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       27 (Lifetime Min/Max 18/48)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       248
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       413138944
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always       -       24331
203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always       -       1533254828650

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

son normali quei valori altissimi?

Gimli[2BV!2B] · 16-11-2007, 22:45

Quegli errori che vedi in fondo non sono che gli ultimi cinque registrati, di cui sono conservati i dettagli.

Mi sembrano un po' sballati quelli del portatile:

Codice:

  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       18475656

L'hai tenuto acceso per 2109 anni ultimamente?

Ricorda che lo S.M.A.R.T. è poco più di una scatola nera, cerca di conservare uno storico delle attività rilevanti, ma ne è stata provata la scarsa affidabilità nel predire il crash dei dischi.

Anch'io ho un disco da 2.5'' con una storia travagliata che dava risultati estremamente allarmanti, con Hardware ECC Recovered attorno alla centinaia di milioni, ma una volta spostato in una nuova scheda madre i dati letti sono ben diversi; immagino quindi che ci siano anche problemi di implementazioni non completamente compatibili.

Articolo riguardante l'argomento, passato qualche tempo fa su questi stessi schermi.

iron84 · 17-11-2007, 11:06

Quote:

Originariamente inviato da Gimli[2BV!2B]

Mi sembrano un po' sballati quelli del portatile:

Codice:

  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       18475656

L'hai tenuto acceso per 2109 anni ultimamente?

Articolo riguardante l'argomento, passato qualche tempo fa su questi stessi schermi.

Vuoi vedere che me l'han venduto di seconda mano?

A parte gli scherzi per sdrammatizzare.
Grazie per la segnalazione a quell'articolo. Purtroppo però non riesco a visualizzare il pdf

iron84 · 17-04-2009, 22:07

Adesso c'è questo bel software per linux: si chiama GsmartControl.
Inpratica si ha un controllo grafico dei parametri smart.

16-11-2007, 22:45	#2
Gimli[2BV!2B] Senior Member Iscritto dal: Feb 2006 Città: Parma Messaggi: 3010	Quegli errori che vedi in fondo non sono che gli ultimi cinque registrati, di cui sono conservati i dettagli. Mi sembrano un po' sballati quelli del portatile: Codice: 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 18475656 L'hai tenuto acceso per 2109 anni ultimamente? Ricorda che lo S.M.A.R.T. è poco più di una scatola nera, cerca di conservare uno storico delle attività rilevanti, ma ne è stata provata la scarsa affidabilità nel predire il crash dei dischi. Anch'io ho un disco da 2.5'' con una storia travagliata che dava risultati estremamente allarmanti, con Hardware ECC Recovered attorno alla centinaia di milioni, ma una volta spostato in una nuova scheda madre i dati letti sono ben diversi; immagino quindi che ci siano anche problemi di implementazioni non completamente compatibili. Articolo riguardante l'argomento, passato qualche tempo fa su questi stessi schermi. __________________ ~Breve riferimento ai comandi GNU/Linux (ormai non molto breve...)

17-04-2009, 22:07	#4
iron84 Senior Member Iscritto dal: Feb 2004 Città: /media/ValSusa Messaggi: 3607	Adesso c'è questo bel software per linux: si chiama GsmartControl. Inpratica si ha un controllo grafico dei parametri smart. __________________ Il mio negozio!

Strumenti
Mostra una versione stampabile Invia questa pagina per email