Masterizzazione DVD interrotta

[Superdan]

Ho acquistato un masterizzatore di DVD della BTC.
Ho provato a masterizzare un DVD con Nero 6 ma per due volte la masterizzazione si e' interrotta al 22%. Purtroppo ora non ricordo il msg di interruzione, qualcuno puo' darmi cmq una mano?

[MM]

Intanto leggiti questa
http://forum.hwupgrade.it/showthread...hreadid=592553

Comunque senza alcun dato come facciamo a rispondere?
Siamo mica indovini

[Superdan]

hai ragione, ma per mia inesperienza non so cosa possa servire... il log dell'errore ce l'ho sul pc di casa, domani lo posto.
Cmq il msg diceva errore di timeout.

Domanda: per non bruciarmi 2 Euro di DVD a botta, e' una buona idea fare i tentativi su un DVD RW?

Grazie 1000!

[Straniero]

Ciao.
Sicuramente ti può essere d'aiuto provare sui RW, anche se non è la stessa cosa...

[Superdan]

Ecco il log dell'errore, io ora provo a aggiornare il firmware, cmq il mio masterizz e' un BTC 1008 con firmware 055

Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17.00.00
ahead WinASPI: File 'C:\PROGRAMMI\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 21.25.04
Versione Nero: 6.0.0.16 (Nero Express)
Masterizzatore: <DVDRW IDE1008> Versione: 0055 - HA 0 TA 0 - 6.0.0.16
Driver Adattatore: <ESDI_506
> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Versione: DS18 - HA 0 TA 1 - 6.0.0.16
Driver Adattatore: <ESDI_506
> HA 0
DVDRW IDE1008 (Target 0, E: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
JLMS XJ-HD166S (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 17825792 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 79MB (81336kB)
Free physical memory: 0MB (36kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.5.2004
Compilation UDF/ISO
11.38.26 #1 Phase 112 File dlgbrnst.cpp, Line 1843
Riallocazione file DVD-Video iniziata

11.38.26 #2 Phase 114 File dlgbrnst.cpp, Line 1843
Riallocazione dile DVD-Video completata (nessun file modificato)

11.38.26 #3 Text 0 File Isodoc.cpp, Line 5907
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11.38.26 #4 Phase 111 File dlgbrnst.cpp, Line 1843
File DVD-Video ordinati

11.38.26 #5 Text 0 File Reader.cpp, Line 118
Reader running

11.38.26 #6 Text 0 File Writer.cpp, Line 127
Writer DVDRW IDE1008 running

11.38.26 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

11.38.26 #8 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

11.38.26 #9 Text 0 File Burncd.cpp, Line 3169
Turn on Disc-at-once, using DVD media

11.38.26 #10 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2271119 (504:41.44)

11.38.26 #11 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

11.38.26 #12 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: NANYA, Media Type ID: RJB, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

11.38.26 #13 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11.38.26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2271120 (2271120) = #2271120/504:41.45
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2271120 blocks [DVDRW IDE1008 ]
--------------------------------------------------------------

11.38.26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4651560960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2271120 | lead-out | 1 | 0x00 | 0x41

11.38.26 #16 Phase 24 File dlgbrnst.cpp, Line 1843
Inizio ottimizzazione file

11.38.26 #17 Phase 25 File dlgbrnst.cpp, Line 1843
Ottimizzazione file completata

11.38.26 #18 Phase 36 File dlgbrnst.cpp, Line 1843
Inizio scrittura a 4x (5.520 KB/s)

11.38.26 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11.38.26 #20 Text 0 File Cdrdrv.cpp, Line 7909
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 4E 41 4E 59 41 00 - 00 00 52 4A 42 00 38 23 ..NANYA...RJB.8#
54 37 15 02 52 6C 02 B4 - 63 15 15 0B 0A 08 08 01 T7..Rl..c.......
19 1E 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................

11.38.26 #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 14:15,324 (855324ms) -> OK

11.38.26 #22 Text 0 File DVDPlusRW.cpp, Line 554
Start write address at LBA 0
DVD high compatibility mode: Yes

11.57.15 #23 Text 0 File Scsicmd.cpp, Line 1627
SCSI timeout (2), 180000ms, CDB Data[hex]: 2A 00 00 07 7C 40 00 00 20 00 00 00

11.57.15 #24 CDR -1175 File Cdrdrv.cpp, Line 1326
Traccia interna
Command timeout occured: timeout 180000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x07 0x7C 0x40 0x00 0x00 0x20 0x00 0x00 0x00


11.57.15 #25 SCSI -26 File Cdrdrv.cpp, Line 1356
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02060000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0x7C 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11.57.15 #26 SCSI -26 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02060000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0x7C 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11.57.15 #27 CDR -26 File Writer.cpp, Line 335
Errore di timeout di comando SCSI/ATAPI
DVDRW IDE1008\H0 T0

11.57.17 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11.57.17 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11.57.37 #30 Text 0 File Scsicmd.cpp, Line 1627
SCSI timeout (2), 10000ms, CDB Data[hex]: AD 00 00 00 00 00 00 00 08 04 00 00

11.57.37 #31 SCSI -1000 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05355000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11.57.37 #32 CDR -1175 File Cdrdrv.cpp, Line 1219
Traccia interna
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: AD 00 00 00 00 00 00 00 08 04 00 00


11.57.37 #33 SCSI -26 File Cdrdrv.cpp, Line 1246
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05355000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11.57.45 #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

11.57.45 #35 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

11.57.45 #36 Phase 38 File dlgbrnst.cpp, Line 1843
Scrittura fallita a 4x (5.520 KB/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 17.55.38
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17.00.00

Registry Keys:

[MM]

OK, intanto prova a d aggiornare il firmware, poi magari prova e vedi se il problema esiste ancora

[Superdan]

Non ho aggiornato il firmware perche' la versione sul sito della BTC e' la stessa del masterizzatore, la 055.
In compenso, visto che avevo sacrificato 2 DVD+R, ho provato anche a sacrificarne uno -R, e sebbene alla velocita 2X ce l'ho fatta.
Domande: il masterizz ha prob con i +R? o forse solo con quella marca di +R?
Se non ho capito male, l'errore e' dovuto allo svuotamento della cache. E' solo un caso che con il -R sia andata bene?

[Straniero]

Difficile affermare che sia o meno solo un caso, visto che di -r ne sono stati fatti solo uno... E lo stesso per la marca dei +r. Erano i primi che provavi di quella marca o ne avevi già fatti altri?

[Mistral PaolinuX]

Io sarò ripetitivo, ma... provato a reinstallare il layer ASPI (vedi FAQ e guide della sezione) ?

Paolo