Porta TCP bloccata dal router...

[Golosone1000]

Ho la suddetta porta bloccata dal router, come posso "sbloccarla"?
Il router è un Kraun

Grazie in anticipo ^^

[lucasante]

blindata?

[Golosone1000]

si, blindata!

Come fò a sblindarla?

[lucasante]

ma quale porta scusa??

[Golosone1000]

TPC 4662


ID [...]
Public Port [...]
Private Port [...]
Port Type [TCP o UDP ]
Host IP Address [...]

SAVE...

Cosa devo mettere su Public port e private poert?
Per port type è TCP ^^
Per l'host IP adress metto il mio IP?


Grazie, ogni aiuto è ben accetto

[lucasante]

non mi dice che non ti va emule

il tuo router non lo conoco
pero' metterei

ID boh.. sara' un numero a caso
public e private metterei 4662
TCP o UDP scegli TCP

ip.. metti il tuo ip fisso del pc (l'ip lan non internet.. )

[Golosone1000]

ora provo, ti so dire

E...grazie ^^

EDIT: per l'IP questo va bene: http://www.whatismyip.com/

[lucasante]

no secondo me devi mettere il tuo ip interno
che vedi facendo un ipconfig

[zago]

scusa che router hai che mi riesce a trovarlo?

[Golosone1000]

niente, ho provato anche con l'ip interno e non va...

Ho un Kraun come router

EDIT: ho paura che l'inceppo sia su public e private porte...non so se devono essere uguali

[lucasante]

c'e' una voce NAT da qualche parte?

ma dove lo hai trovato sto router?

[Golosone1000]

si c'è una voce nat:

NAT Configuration

[Disabled o NAT o NATP o Dynamic NATP] NAT

User's IP [...]
Action [Add o Delet]

Submit | reset




#|Session Name|User's IP

Number of NAT Configurations 0

Session Name Configuration <--link

Settings need to be saved to Flash and the system needs to be rebooted for changes to take effect.



EDIT: il router è questo

[lucasante]

certo che di peggio un potevi comprare eh

ip metti quello del pc come sempre..
poi fai action ADD

e verra' un altro menu.. vedi un po' che dice..

[Golosone1000]

Originariamente inviato da lucasante

certo che di peggio un potevi comprare eh

ip metti quello del pc come sempre..
poi fai action ADD

e verra' un altro menu.. vedi un po' che dice..

non viene enssun altro menù :S
Però adesso ho Dynamic 1 NAPT, devo mettere qualcos'altro?

[lucasante]

bohh mai visto un setup simile.. ma non c'e' il manuale?

[Golosone1000]

3.3.8 Configuration - NAT Configuration
The NAT Configuration page allows the user to set the configuration for the Network
Address Translation. The default setting is Dynamic NAPT. It provides dynamic
Network Address Translation capability between LAN and multiple WAN connections, and the LAN traffic is routed to appropriate WAN connections based on the destination IP addresses and Route Table. This eliminates the need for the static NAT session
configuration between multiple LAN clients and multiple WAN connections.
When the Dynamic NAPT is chosen, there is no need to configure the NAT Session and
NAT Session Name Configuration.




NAPT (Static)

The NAPT option maps the single WAN IP addresses to many local PCs IP addresses.(1xN). It is the multiple-mapping mechanism. For each WAN Interface, more than one local PCs can be associated with one WAN Interface. Click the link Session Name Configuration to add the session name for WAN interface.

Session Name: This field allows the user to select the session from the configured NAT

Session Name Configuration.

User’s IP: This filed allows the user to assign the IP address to map the corresponding

NAT/NAPT sessions.

Session Name Status will be displayed at the middle of this page to show the

corresponding Session Name with its IP address.

Number of NAT Configurations: This filed displays the total number of NAT Sessions

is entered.

Available Sessions Status will be displayed at the end of this page to show all the

Session Names with its WAN Interface.

Number of Session: This filed displays the total number of NAT Sessions Name is

entered.



NAT (Static)

The NAT option only maps single WAN IP address to the local PC IP address. It is peerto-peer mapping. (1x1) For each WAN interface, only one local PC IP address can be associated with each WAN interface. Click the link Session Name Configuration to add the session name for WAN interface.

Session Name: This field allows the user to enter his/her own session Name to distinguish different NAT session for different interfaces among different PPP sessions and different PVCs.

Interface: This field allows the user to choose specific WAN Interface (PVC or PPP Session) for NAT Session.

NAT Session Name Status: This table displays at the bottom of this page to show all

the NAT Session Names with its WAN Interface.

Number of NAT Configurations: This filed displays the total number of NAT Sessions

Name is entered.

Click the link Go back to NAT Configuration to the NAT configuration page. Select the NAT option. Select the Session Name and assign the PC IP address, and choose the Add action. Click the Submit button and go to the Save Settings to save this configuration.

NAT allows only one entry (User IP) per session.

NAPT allows many entries (User IPs) per session.

　

3.3.9 Configuration - Virtual Server Configuration

The Virtual Server Configuration page allows the user to set the configuration of Virtual Server. The Conexant firmware includes the Free BSD version firewall. All UDP/TCP ports are protected from intrusion. If any specific local PCs need to be mapped to the UDP/TCP port on WAN side, please input the mappings here.



Public Port: This field allows the user to enter the port number of the Public Network.

Private Port: This field allows the user to enter the port number of the Private Network.In most cases, the private port number is same as public port number.

Host IP Address: This field allows the user to enter the private network IP address for the particular sever.

　

3.3.10 Configuration - DNS Configuration

The DNS Configuration page allows the user to set the configuration of DNS proxy.The Conexant firmware supports the DNS proxy function. For the DHCP requests from local PCs, the DHCP server will set the LAN port IP as the default DNS server. Thus, all DNS query messages will come into LAN port first. The DNS proxy on the ADSL modem recorded the available DNS servers, and forward DNS query messages to one of DNS server.



Disable DNS Proxy: The LAN port does not process the DNS query message. For the DHCP requests from local PCs, the DHCP server will set the user-configured preferred DNS sever or alternate DNS server whichever is available as the DNS server. Then all DNS query messages will be directly sent to the DNS servers.

Use Auto Discovered DNS Servers Only: The DNS proxy will store the DNS server IP addresses obtained from DHCP client or PPP into the table. And all DNS query messages will be sent to one of the dynamically obtained DNS servers.

Use User Configured DNS Servers Only: The DNS proxy will use the user-configured preferred DNS server and alternate DNS server. And all DNS query message will be sent to one of DNS servers. Enter the DNS IP in the Preferred DNS Server and Alternate DNS Server fields.

Auto Discovery + User Configured: The DNS proxy’s table has all the IP addresses of dynamically obtained and user configured DNS servers.


Help pls

[lucasante]

All UDP/TCP ports are protected from intrusion. If any specific local PCs need to be mapped to the UDP/TCP port on WAN side, please input the mappings here.



Public Port: This field allows the user to enter the port number of the Public Network.

Private Port: This field allows the user to enter the port number of the Private Network.In most cases, the private port number is same as public port number.

Host IP Address: This field allows the user to enter the private network IP address for the particular sever.


virtual server..

mi sa che devi mettere la porta che vuoi aprire li'.. ma poi anche l'altra di udp per emule devi inserire mi sa..

[Golosone1000]

Originariamente inviato da lucasante

All UDP/TCP ports are protected from intrusion. If any specific local PCs need to be mapped to the UDP/TCP port on WAN side, please input the mappings here.



Public Port: This field allows the user to enter the port number of the Public Network.

Private Port: This field allows the user to enter the port number of the Private Network.In most cases, the private port number is same as public port number.

Host IP Address: This field allows the user to enter the private network IP address for the particular sever.


virtual server..

mi sa che devi mettere la porta che vuoi aprire li'.. ma poi anche l'altra di udp per emule devi inserire mi sa..

cioè? Scusa, non ho capito

[Golosone1000]

scusate per il disturbo, sono un pirla, mi dimenticavo di salvare

[zago]

scusa quel router fa anche da swirch??

cmq public sono le porte vesto internet

private son le porte all'interno della lan