|
|||||||
|
|
|
 |
|
|
Strumenti |
09-01-2017, 18:14
|
#1 |
|
Senior Member
Iscritto dal: Jan 2008
Messaggi: 636
|
Problema ventole Mint 18.1 su vecchio pc
Ciao a tutti!
Ho installato Linux Mint 18.1 64bit su un desktop che montava la 14.1 per alcuni problemi che ho pensato bene (sic!) di risolvere con una nuova versione. Con la 14 venivano visualizzati 4/5 sensori di temperatura e all'epoca sono riuscito, con una serie di smanettamenti, a regolare le ventole rendendo il pc abbastanza fresco e silenzioso. Ora vengono rilevati solo due sensori e le ventole restano a palla. Non ho molto tempo per sistemare il pc e siccome con linux sono piuttosto arruginito avrei bisogno di una mano. Il sistema, in sintesi, è così composto: Intel Pentium E2200 Asrock G41M-GS3 8gb di ram nVidia 9600 GT hdd WD Green (partizionato) output di lshw: Codice:
zesto@zesto-desktop ~ $ lshw
zesto-desktop
description: Computer
width: 64 bits
capabilities: vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7981MiB
*-cpu
product: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
*-pci
description: Host bridge
product: 4 Series Chipset DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 03
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 4 Series Chipset PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:e000(size=4096) memory:fa000000-febfffff ioport:e0000000(size=268435456)
*-display
description: VGA compatible controller
product: G94 [GeForce 9600 GT]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:04:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:29 memory:fd000000-fdffffff memory:e0000000-efffffff memory:fa000000-fbffffff ioport:ec00(size=128) memory:fc000000-fc07ffff
*-multimedia
description: Audio device
product: NM10/ICH7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:28 memory:f9ffc000-f9ffffff
*-pci:1
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25 ioport:1000(size=4096) memory:dc000000-dc3fffff ioport:dff00000(size=1048576)
*-pci:2
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 ioport:d000(size=4096) memory:dc400000-dc7fffff ioport:dfe00000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 03
serial: 00:25:22:ed:9e:f9
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.103 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
resources: irq:27 ioport:d800(size=256) memory:dfeff000-dfefffff memory:dfef8000-dfefbfff
*-usb:0
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:c480(size=32)
*-usb:1
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:c800(size=32)
*-usb:2
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:c880(size=32)
*-usb:3
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:cc00(size=32)
*-usb:4
description: USB controller
product: NM10/ICH7 Family USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 01
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:f9ffbc00-f9ffbfff
*-pci:3
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: e1
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-isa
description: ISA bridge
product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-ide:0
description: IDE interface
product: 82801G (ICH7 Family) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=ata_piix latency=0
resources: irq:18 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-ide:1
description: IDE interface
product: NM10/ICH7 Family SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 01
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:19 ioport:c400(size=8) ioport:c080(size=4) ioport:c000(size=8) ioport:bc00(size=4) ioport:b880(size=16)
*-serial UNCLAIMED
description: SMBus
product: NM10/ICH7 Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: ioport:400(size=32)
*-scsi
physical id: 2
logical name: scsi3
capabilities: emulated
*-cdrom
description: DVD writer
product: DVD-RW DVR-215D
vendor: PIONEER
physical id: 0.1.0
bus info: scsi@3:0.1.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
version: 1.19
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
*-scsi
physical id: 1
bus info: scsi@4
logical name: scsi4
capabilities: scsi-host
configuration: driver=usb-storage
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
Codice:
zesto@zesto-desktop ~ $ lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) 04:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1) Codice:
zesto@zesto-desktop ~ $ sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +42.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +42.0°C (high = +86.0°C, crit = +100.0°C) Codice:
# pwmconfig revision 6243 (2014-03-20) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed  
__________________
Ahi serva Italia, di dolore ostello, nave sanza nocchiere in gran tempesta, non donna di province, ma bordello! Ultima modifica di zesto : 10-01-2017 alle 13:19. |
|
|
|
09-01-2017, 20:05
|
#2 |
|
Senior Member
Iscritto dal: Apr 2004
Messaggi: 9516
|
|
|
|
|
|
09-01-2017, 22:52
|
#3 | |
|
Senior Member
Iscritto dal: Jan 2008
Messaggi: 636
|
Quote:
Si, l'avevo letto (spero di non aver saltato nessun passaggio). Il problema è che mi ritrovo meno sensori di quelli che avevo prima e senza neanche una ventola pwm (almeno quella della cpu dovrebbe esserelo: dalla foto che puoi vedere qua: http://www.asrock.com/mb/Intel/G41M-GS3/index.it.asp il connettore vicino alla cpu ha 4 pin. Solo 3 (quindi non pwm) quello dall'altra parte della mobo (ricordo che ero riuscito a settare anche quelle non pwm ad un numero di giri fisso ma accettabile). Non risulta quindi il sensore della scheda madre ma solo quello della cpu. Quello dell'hdd e della scheda video funzionano ma solo se richiamati singolarmente (il secondo tramite il pannello nVidia). Nell'applet non risultano.
__________________
Ahi serva Italia, di dolore ostello, nave sanza nocchiere in gran tempesta, non donna di province, ma bordello! |
|
|
|
|
|
10-01-2017, 07:55
|
#4 |
|
Senior Member
Iscritto dal: Apr 2004
Messaggi: 9516
|
hai degli errori nei log?
Codice:
sudo systemctl --failed Codice:
sudo journalctl -b -p err (chiaramente il kernel sara' molto diverso da quello vecchio) |
|
|
|
|
10-01-2017, 11:04
|
#5 | |
|
Senior Member
Iscritto dal: Jan 2008
Messaggi: 636
|
Quote:
Codice:
zesto@zesto-desktop ~ $ sudo systemctl --failed [sudo] password di zesto: 0 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. zesto@zesto-desktop ~ $ systemctl list-unit-files UNIT FILE STATE proc-sys-fs-binfmt_misc.automount static org.freedesktop.hostname1.busname static org.freedesktop.locale1.busname static org.freedesktop.login1.busname static org.freedesktop.network1.busname static org.freedesktop.resolve1.busname static org.freedesktop.systemd1.busname static org.freedesktop.timedate1.busname static dev-hugepages.mount static dev-mqueue.mount static proc-sys-fs-binfmt_misc.mount static sys-fs-fuse-connections.mount static sys-kernel-config.mount static sys-kernel-debug.mount static acpid.path enabled cups.path enabled systemd-ask-password-console.path static systemd-ask-password-plymouth.path static systemd-ask-password-wall.path static systemd-networkd-resolvconf-update.path static accounts-daemon.service enabled acpid.service disabled lines 1-23 Codice:
- Logs begin at mar 2017-01-10 11:38:02 CET, end at mar 2017-01-10 11:52:26 CET. -- gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan co gen 10 11:38:11 zesto-desktop nvidia-persistenced[805]: Failed to query NVIDIA devices. Please ensure that the NVIDIA dev gen 10 11:38:14 zesto-desktop ntpdate[922]: name server cannot be used: Temporary failure in name resolution (-3) gen 10 11:38:17 zesto-desktop ntpd[1225]: error resolving pool 0.ubuntu.pool.ntp.org: Temporary failure in name resolutio gen 10 11:38:18 zesto-desktop ntpd[1225]: error resolving pool 1.ubuntu.pool.ntp.org: Temporary failure in name resolutio gen 10 11:38:19 zesto-desktop ntpd[1225]: error resolving pool 2.ubuntu.pool.ntp.org: Temporary failure in name resolutio gen 10 11:38:20 zesto-desktop NetworkManager[818]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed gen 10 11:38:20 zesto-desktop ntpd[1225]: error resolving pool 3.ubuntu.pool.ntp.org: Temporary failure in name resolutio gen 10 11:38:21 zesto-desktop ntpd[1225]: error resolving pool ntp.ubuntu.com: Temporary failure in name resolution (-3) gen 10 11:38:24 zesto-desktop ntpd[1225]: bind(23) AF_INET6 fe80::860d:218f:d9a0:3d9e%2#123 flags 0x11 failed: Cannot ass lines 1-23...skipping... -- Logs begin at mar 2017-01-10 11:38:02 CET, end at mar 2017-01-10 11:52:26 CET. -- gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc0183, key code 226): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1005, key code 212): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc101f, key code 419): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1020, key code 418): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1041, key code 421): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1042, key code 423): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1043, key code 397): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1044, key code 149): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1045, key code 202): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1046, key code 203): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc1048, key code 430): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104a, key code 136): Invalid argument gen 10 11:38:07 zesto-desktop systemd-udevd[424]: Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc104c, key code 162): Invalid argument gen 10 11:38:11 zesto-desktop nvidia-persistenced[805]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 122 has rea gen 10 11:38:14 zesto-desktop ntpdate[922]: name server cannot be used: Temporary failure in name resolution (-3) gen 10 11:38:17 zesto-desktop ntpd[1225]: error resolving pool 0.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3) gen 10 11:38:18 zesto-desktop ntpd[1225]: error resolving pool 1.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3) gen 10 11:38:19 zesto-desktop ntpd[1225]: error resolving pool 2.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3) gen 10 11:38:20 zesto-desktop NetworkManager[818]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed gen 10 11:38:20 zesto-desktop ntpd[1225]: error resolving pool 3.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3) gen 10 11:38:21 zesto-desktop ntpd[1225]: error resolving pool ntp.ubuntu.com: Temporary failure in name resolution (-3) gen 10 11:38:24 zesto-desktop ntpd[1225]: bind(23) AF_INET6 fe80::860d:218f:d9a0:3d9e%2#123 flags 0x11 failed: Cannot assign requested address gen 10 11:38:24 zesto-desktop ntpd[1225]: unable to create socket on enp1s0 (4) for fe80::860d:218f:d9a0:3d9e%2#123 gen 10 11:38:44 zesto-desktop mdm[1517]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: impossibile aprire il file oggetto condiviso: File o directory non es gen 10 11:38:44 zesto-desktop mdm[1517]: PAM adding faulty module: pam_kwallet.so gen 10 11:39:00 zesto-desktop mdm[1517]: GLib-CRITICAL: g_key_file_get_string: assertion 'key_file != NULL' failed gen 10 11:39:00 zesto-desktop mdm[1517]: GLib-CRITICAL: g_key_file_free: assertion 'key_file != NULL' failed gen 10 11:39:28 zesto-desktop pulseaudio[1798]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible caus
__________________
Ahi serva Italia, di dolore ostello, nave sanza nocchiere in gran tempesta, non donna di province, ma bordello! Ultima modifica di zesto : 10-01-2017 alle 11:30. |
|
|
|
|
|
10-01-2017, 11:25
|
#6 |
|
Senior Member
Iscritto dal: Jan 2008
Messaggi: 636
|
Dopo una serie di smanettamenti (anche un po a caso, devo ammetterlo...) sono riuscito a far riconoscere i sensori e a regolare almeno la ventola della cpu tramite pwmconfig (ne ho lasciata solo un'altra collegata alla mobo tramite un regolatore fisico che la tiene buona a 900 rpm).
Non riesco però ad abbassare gli rpm medi della ventola della cpu (intendiamoci, molto meglio di ieri, ma potrebbe essere più silenziosa), o meglio: vorrei intervenire sul parametro giusto senza far danni. Inoltre dando /usr/sbin/fancontrol oltre alla configurazione mi restituisce un errore (in aggiunta a quelli del post precedente): la regolazione viene fatta ma il file non esiste.  Lascio perdere?Codice:
zesto@zesto-desktop ~ $ /usr/sbin/fancontrol Loading configuration from /etc/fancontrol ... Common settings: INTERVAL=10 Settings for hwmon1/device/pwm2: Depends on hwmon0/temp2_input Controls hwmon1/device/fan2_input MINTEMP=15 MAXTEMP=60 MINSTART=150 MINSTOP=0 MINPWM=0 MAXPWM=255 Error: file hwmon1/device/pwm2 doesn't exist At least one referenced file is missing. Either some required kernel modules haven't been loaded, or your configuration file is outdated. In the latter case, you should run pwmconfig again.
__________________
Ahi serva Italia, di dolore ostello, nave sanza nocchiere in gran tempesta, non donna di province, ma bordello! Ultima modifica di zesto : 10-01-2017 alle 11:36. |
|
|
|
|
11-01-2017, 08:36
|
#7 | |
|
Senior Member
Iscritto dal: Apr 2004
Messaggi: 9516
|
questo servizio l'hai disabilitato tu?
Quote:
p.s. cel'hai il pacchetto: libpam-kwallet4 Ultima modifica di sacarde : 11-01-2017 alle 09:27. |
|
|
|
|
|
11-01-2017, 13:27
|
#8 | ||
|
Senior Member
Iscritto dal: Jan 2008
Messaggi: 636
|
Quote:
Quote:
__________________
Ahi serva Italia, di dolore ostello, nave sanza nocchiere in gran tempesta, non donna di province, ma bordello! |
||
|
|
|
|
11-01-2017, 15:23
|
#9 |
|
Senior Member
Iscritto dal: Apr 2004
Messaggi: 9516
|
- proverei a abilitarlo
Codice:
sudo systemctl enable acpid.service - l'errore nei log: /lib/security/pam_kwallet.so: impossibile aprire il file si risolve installandolo Codice:
sudo apt-get install libpam-kwallet4 |
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 11:21.
