Non avviene il routing multicast !

[dwfgerw]

Ciao a tutti ho un problema con il multicast... Allora devo mettere in piedi un videoserver che spari in multicast (224.0.1.40) uno streaming. Ho messo in piedi due router collegati seriali con route statiche e due pc direttamente connessi, di cui uno è il server streaming e l'altro è il reciver. I due pc hanno due network differenti (192.168.1.x e 192.168.0.x) si pingano correttamente. Se invece i due vengono configurati con la stessa network il multicast avviene.

Di seguito posto le configurazioni dei due router :

 

do sh run
Building configuration...

Current configuration : 893 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RT_Receiver
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
ip cef
!
!
!
!
ip multicast-routing 
multilink bundle-name authenticated
 --More--         !
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
interface FastEthernet0/0
 ip address 192.168.1.1 255.255.255.0
 ip pim sparse-dense-mode
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
 --More--         !
interface Serial0/0/0
 ip address 1.1.1.2 255.255.255.252
 ip pim sparse-dense-mode
!
ip route 192.168.0.0 255.255.255.0 1.1.1.1
!
!
ip http server
no ip http secure-server
ip pim bidir-enable
!
access-list 1 permit 10.0.0.0 0.0.0.255
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
 password cisco
 login
 --More--         !
scheduler allocate 20000 1000
end

RT_Receiver(config)#

  do sh run
Building configuration...

Current configuration : 977 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RT_Sender
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip cef
!
!
!
!
ip multicast-routing 
multilink bundle-name authenticated
!
 --More--         !
!
!
archive
 log config
  hidekeys
!
!
bridge irb
!
!
!
interface FastEthernet0/0
 ip address 192.168.0.1 255.255.255.0
 ip pim sparse-dense-mode
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 ip pim sparse-dense-mode
 shutdown
 duplex auto
 --More--          speed auto
!
interface Serial0/0/0
 ip address 1.1.1.1 255.255.255.252
 ip pim sparse-dense-mode
 no fair-queue
 clock rate 2000000
!
interface Serial0/0/1
 no ip address
 shutdown
 clock rate 2000000
!
ip route 192.168.1.0 255.255.255.0 1.1.1.2
!
!
ip http server
no ip http secure-server
ip pim bidir-enable
!
!
!
control-plane
 --More--         !
bridge 1 protocol ieee
!
line con 0
line aux 0
line vty 0 4
 login
!
scheduler allocate 20000 1000
end

RT_Sender(config)#

grazie per eventuali consigli