Aiuto raga, mi appare un errore che non mi fa dormire la notte!...

[bumbe80]

Premetto che ho un masterizzatore Nec 3540 nuovo e che lo stesso errore me lo dava con un Btc 1004. Posseggo inoltre una scheda madre Gigabyte gx7dxr, athlon xp 1800 non overclockato, 512 ram ddr, Liteon cd-rw 52x24x52; i masterizzatori sono montati sul secondary in posizione: Nec master Liteon slave (sono sul secondary perchè, non capisco, sul primary nel masterizzare dvd -sia Nec che Btc- mi si blocca il programma); utilizzo per incidere dvd Nero 6.6.0.13 (l'ultimo uscito).
Il mio problema è il seguente: utilizzando il masterizzatore dvd solo nel masterizzare dvd (non dipende dalla qualità dei dvd, già provato) mi appaiono messahhi di errore "buffer too large" o "SCSI error- o simile-" e mi si arresta la masterizzazione o espellando il disco , nel primo caso, o bloccando il programma, secondo caso.
Ora il problema è questo: perchè avviene ciò e soprattutto perchè non avviene sempre?
Vi prego di fare di tutto per aiutarmi, le ho provate tutte e solo ora chiedo un valido aiuto da intenditori.

Vi allego il log dell'ultimo errore "buffer too large".






Marco XXXXXXX

1A23-0609-9030-2235-1682-3872

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'E:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <_NEC DVD_RW ND-3540A> Version: 1.01 - HA 2 TA 0 - 6.6.0.13
Adapter driver: <viadsk> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-3540A >Version: 1.01 - HA 2 TA 0 - 6.6.0.13
Adapter driver: <viadsk> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 VA4O ultra Port 0 ID 0 DMA: Off
DiskPeripheral : IC35L040AVVN07-0 VA2O ultra Port 0 ID 1 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3540A 1.01 viadsk Port 2 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S 6S0F viadsk Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3540A D: CDRom0
LITE-ON LTR-52246S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 37MB (38656kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.6.2005
ISO compilation
0.12.37 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

0.12.37 #2 Text 0 File Reader.cpp, Line 127
Reader running

0.12.37 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3540A running

0.12.37 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

0.12.38 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

0.13.38 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 35939 ( 7:59.14, 70MB)

0.13.38 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

0.13.38 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD_RW ND-3540A, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

0.13.38 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

0.13.38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 17968 (17968) = #17968/3:59.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 17968 blocks [_NEC DVD_RW ND-3540A]
1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #15 + 4 (4) = #19/0:0.19
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4 blocks [_NEC DVD_RW ND-3540A]
--------------------------------------------------------------

0.13.38 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 36798464, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 36798464 36798464 36806656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
17968 | lead-in | 0 | 0x41 | 0x00
17968 | 1 | 0 | 0x41 | 0x00
17968 | 1 | 1 | 0x41 | 0x00
35936 | 2 | 0 | 0x41 | 0x00
35936 | 2 | 1 | 0x41 | 0x00
35940 | lead-out | 1 | 0x41 | 0x00

0.13.39 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

0.13.39 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

0.13.39 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

0.13.39 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)

0.13.39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #17968

0.13.39 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #15): write at #15

0.13.39 #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 10F1CF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

0.13.39 #19 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038D7400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00

0.13.39 #20 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038D7400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00

0.13.39 #21 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 17968
DVD high compatibility mode: Yes

0.13.41 #22 SCSI -31 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04260200
Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x46 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

0.13.41 #23 CDR -31 File Writer.cpp, Line 311
Buffer too large
_NEC DVD_RW ND-3540A\H2 T0

0.13.41 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

0.13.42 #25 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038D7400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00

0.13.42 #26 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x038D7400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00

0.13.42 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 0.28.09 (Prassi/Veritas driver for win 2K)
File 'Drivers\viadsk.sys': Ver=5.1.2600.320, size=56576 bytes, created 19/06/2003 18.00.00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

[fratellino76]

la piattina IDE dei lettori è quella a 80 poli ?

[bumbe80]

non saprei, credo di sì... è quello standard che ho da un paio d'anni. Cmq, ripeto: a volte funziona a volte no. Spero che tu mi possa dare una mano, sia a capire cosa sta succedendo, sia a risolvere il problema, sia a capire come si fa a riconoscere un cavo di cui parli tu.
In ogni caso, se ti può essere utile, fino a circa 8 mesi fa tutto funzionava in primary.
Attendo ansioso i vostri suggerimenti (ed il tuo naturalmente).
grazie

[fratellino76]

scusa il ritardo ma ero via per il WE.

Comunque la piattina a 80 poli (che supporta ata100) la riconosci rispetto a quella a 40 (che supporta ata33 o ata66 non ricordo) perchè ha un numero doppio di fili (80 appunto) di sezione inferiore e spesso la causa di problemi di trasferimento dati da/a periferiche ottiche veloci e proprio la presenza di vecchie piattine a 40 poli.