[PN-TV] DFI infiniti 875p

[recidivo]

vendo skeda madre DFI infiniti 875p, prezzo 80€+ss, scatola driver, dotazione di serie...
presente in altri forum.
se trovate un prezzo migliore mandate un pvt , non accetto scambi x ora.
specifiche:

CPU

# Intel® Pentium® 4 Processor with Hyper-Threading Technology
- 800MHz and 533MHz FSB
# Intel® Pentium® 4 Northwood Processor
- 533MHz and 400MHz FSB
# Intel® Celeron® Northwood processor
- 400MHz system data bus

CPU Socket

# Socket 478

Chipset

# Intel® 875P chipset
- Intel® 82875P Memory Controller Hub (MCH)
- Intel® 82801ER I/O Controller Hub (ICH5R)

Memory

# Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
# Supports up to 4GB system memory
# Supports Dynamic mode to optimize system performance
# Synchronous operation with processor system bus
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU (supports PAT mode).
DDR333 will run at 320MHz memory frequency when used with 800MHz FSB CPU.
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
- PC2100 (DDR266) with 400MHz FSB CPU
# Supports ECC/non-ECC DIMMs
# Supports unbuffered DIMMs

BIOS


# Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
# Genie BIOS provides:
- CPU/DRAM overclocking in 1MHz stepping
- AGP/PCI/SATA overclocking
- CPU/DIMM/AGP overvoltage
# Flash EPROM for easy BIOS upgrades
# Supports DMI 2.0 function
# 4Mbit flash memory

Power Management


# Supports ACPI specification and OS Directed Power Management
# Supports ACPI STR (Suspend to RAM) function
# Wake-On-Events include:
- Wake-On-Keyboard/Mouse
- Wake-On-USB Keyboard
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system

Hardware Monitor


# Monitors CPU/system temperature and overheat alarm
# Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and failure alarm
# Monitors CPU/chassis/second fan speed and failure alarm
# Automatic chassis/second fans on/off control
# Read back capability that displays temperature, voltage and fan speed
# CPU Fan Protection function monitors the CPU fan during system boot-up
# CPU Temperature Protection function monitors CPU temperature during system boot-up

Audio


# 20-bit stereo full-duplex codec with independent variable sampling rate
# High quality differential CD input
# True stereo line level outputs
# S/PDIF-in/out interface
# 6-channel audio output

LAN


# Uses 82547EI Gigabit LAN CSA interface
# Integrated power management functions
# Full duplex support at both 10, 100 and 1000 Mbps
# Supports IEEE 802.3u auto-negotiation
# Supports wire for management

IDE


# Supports ATA/33, ATA/66 and ATA/100 hard drives
# PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
# Bus mastering reduces CPU utilization during disk transfer
# Supports ATAPI CD-ROM, LS-120 and ZIP

ATA RAID


# Uses HighPoint 372N RAID controller
# RAID 0, 1, 0+1 and 1.5
# Two independent IDE channels support 4 hard disk drives(ATA/33, ATA/66, ATA/100, ATA/133 or EIDE)
# Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6

ICH5R Serial ATA with RAID


# Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0
specification (1.5Gbps interface)
# Supports RAID 0

AGP


# Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x(1066MB/sec.) for 3D graphics
applications (AGP 2x and 3.3V AGP card are not supported)
# Supports AGP 3.0 and AGP 2.0 spec.

Rear Panel I/O Ports


# 4 USB 2.0/1.1 ports
# 1 RJ45 LAN port
# 2 DB-9 serial ports
# 1 DB-25 parallel port
# 1 mini-DIN-6 PS/2 mouse port
# 1 mini-DIN-6 PS/2 keyboard port
# 3 audio jacks: line-out, line-in and mic-in

I/O Connectors


# 2 connectors for 4 additional external USB 2.0/1.1 ports
# 1 front audio connector for external line-out and mic-in jacks
# 1 connector for an external game/MIDI port
# 2 internal audio connectors (CD-in and AUX-in)
# 1 4-channel audio output connector
# 1 S/PDIF-in/out connector
# 1 connector for IrDA interface
# 2 RAID IDE connectors
# 2 Serial ATA connectors
# 2 IDE connectors
# 1 floppy connector
# 2 ATX power supply connectors
# 1 Wake-On-LAN connector
# 3 fan connectors for CPU fan, chassis fan and second fan

Compatibility

# PCI 2.2 and AC ’97 compliant
# Intel AGP version 3.0

Expansion Slots

# 1 AGP slot
# 5 PCI slots

PCB

# 4 layers, ATX form factor
# 30.5cm (12.05") x 24.4cm (9.6")

[gargasecca]

in coda....credo possiamo concludere.....sentiamoci in pvt....

[recidivo]

up in attesa di conferme...