lm-sensor

[ghiotto86]

ho scaricato e installato lm-sensor

poi ho fatto sensors-detec per rilevare i moduli che mi servono e guardate un po

ghiotto:/home/ghiotto86# sensors-detect

This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): yes
Probing for PCI bus adapters...
Use driver `i2c-sis96x' for device 00:02.1: Silicon Integrated Systems SMBus Controller
Probe succesfully concluded.

We will now try to load each adapter module in turn.
Module `i2c-sis96x' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.

We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).

Next adapter: SiS96x SMBus adapter at 0x0c00
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x08
Client found at address 0x10
Client at address 0x50 can not be probed - unload all client drivers first!
Client at address 0x51 can not be probed - unload all client drivers first!
Client found at address 0x69

Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan the ISA bus? (YES/no): yes
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!

Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xf411)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xf411)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xf411)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xf4)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xf4)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M172 Super IO'
Failed! (0xf4)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xf4)
Probing for `VT1211 Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xf4)
Probing for `Winbond W83L517D Super IO'
Failed! (0xf4)

Do you want to scan for secondary Super I/O sensors? (YES/no): yes
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xec11)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xec11)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xec11)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xec)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xec)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M172 Super IO'
Failed! (0xec)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xec)
Probing for `VT1211 Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xec)
Probing for `Winbond W83L517D Super IO'
Failed! (0xec)

Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs...ensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
ghiotto:/home/ghiotto86#
qutti quei failed che significano??'

che devo fa???

[ingpeo]

Controlla che vengano caricati i moduli i2c-core e i2c-dev i2c-isa i2c-sensor.
Poi rifai sensors-detect.

[ghiotto86]

Originariamente inviato da ingpeo
Controlla che vengano caricati i moduli i2c-core e i2c-dev i2c-isa i2c-sensor.
Poi rifai sensors-detect.

guarda qua

ghiotto:/home/ghiotto86# lsmod
Module Size Used by
snd_mixer_oss 16768 0
ipv6 229120 8
af_packet 20744 2
ehci_hcd 29444 0
snd_intel8x0 29984 0
snd_intel8x0m 17220 0
snd_ac97_codec 64608 2 snd_intel8x0,snd_intel8x0m
snd_pcm 84744 3 snd_intel8x0,snd_intel8x0m,snd_ac97_codec
snd_timer 23300 1 snd_pcm
snd 50276 6 snd_mixer_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 9604 3 snd_intel8x0,snd_intel8x0m,snd_pcm
shpchp 86244 0
pci_hotplug 30512 1 shpchp
sis_agp 8068 0
amd64_agp 10952 1
agpgart 31784 2 sis_agp,amd64_agp
parport_pc 34244 0
parport 33480 1 parport_pc
pcspkr 3816 0
psmouse 19336 0
tsdev 7488 0
mousedev 11160 1
joydev 9408 0
evdev 9088 0
usbhid 29376 0
eth1394 19720 0
ohci_hcd 19848 0
usbcore 107384 4 ehci_hcd,usbhid,ohci_hcd
i810_audio 33428 1
ac97_codec 16780 1 i810_audio
soundcore 9824 3 snd,i810_audio
sis900 18436 0
ohci1394 31748 0
eeprom 7448 0
i2c_sensor 3584 1 eeprom
i2c_sis96x 5380 0
i2c_core 21136 3 eeprom,i2c_sensor,i2c_sis96x
sr_mod 15908 0
sbp2 22408 0
ieee1394 100280 3 eth1394,ohci1394,sbp2
genrtc 9204 0
unix 26036 268
ghiotto:/home/ghiotto86# sensors-detect
Display all 108 possibilities? (y or n)
ghiotto:/home/ghiotto86# sensors-detect

This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): yes
Probing for PCI bus adapters...
Use driver `i2c-sis96x' for device 00:02.1: Silicon Integrated Systems SMBus Controller
Probe succesfully concluded.

We will now try to load each adapter module in turn.
Module `i2c-sis96x' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): yes
Module loaded succesfully.

We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).

Next adapter: SiS96x SMBus adapter at 0x0c00
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x08
Client found at address 0x10
Client at address 0x50 can not be probed - unload all client drivers first!
Client at address 0x51 can not be probed - unload all client drivers first!
Client found at address 0x69

Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan the ISA bus? (YES/no): yes
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!

Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xf411)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xf411)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xf411)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xf4)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xf4)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xf4)
Probing for `SMSC 47M172 Super IO'
Failed! (0xf4)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xf4)
Probing for `VT1211 Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xf4)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xf4)
Probing for `Winbond W83L517D Super IO'
Failed! (0xf4)

Do you want to scan for secondary Super I/O sensors? (YES/no): yes
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xec11)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xec11)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xec11)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xec)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xec)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M172 Super IO'
Failed! (0xec)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xec)
Probing for `VT1211 Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xec)
Probing for `Winbond W83L517D Super IO'
Failed! (0xec)

Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs/...nsors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
ghiotto:/home/ghiotto86#
allora??

[blackgnat]

domanda oltremodo scontata .... ma non si sa mai !
Sicuro d'aver scaricato l'ultima versione dei sensors ... controllando magari che il tuo hw sia supportato?
.... sono diventato pazzo per farli funzionare su una suse 9.1 ( con hw da manuale ...nessun pezzo relativamente nuovo .... e tutta roba standard) e mi davano il tuo stesso messaggio.
Ho risolto tutto patchando il kernel ... e scaricando l'ultima versione di lm-sensors.

[ghiotto86]

Originariamente inviato da blackgnat
domanda oltremodo scontata .... ma non si sa mai !
Sicuro d'aver scaricato l'ultima versione dei sensors ... controllando magari che il tuo hw sia supportato?
.... sono diventato pazzo per farli funzionare su una suse 9.1 ( con hw da manuale ...nessun pezzo relativamente nuovo .... e tutta roba standard) e mi davano il tuo stesso messaggio.
Ho risolto tutto patchando il kernel ... e scaricando l'ultima versione di lm-sensors.

c'ho il kernel 2.6.10 patchato bootsplash e ho scaricato lm-sensors con apt (ho debian).
l'unico problema è che ho un portatile.

cosa mi consigli???

[blackgnat]

di controllare se il tuo hw sia pienamente supportato dai sensors ...!
purtroppo non mi viene in mente altro !!
magari il sig google ..... facendo una ricerca " modello notebook lm-sensors" ti può essere d'aiuto

[ghiotto86]

Originariamente inviato da blackgnat
di controllare se il tuo hw sia pienamente supportato dai sensors ...!
purtroppo non mi viene in mente altro !!
magari il sig google ..... facendo una ricerca " modello notebook lm-sensors" ti può essere d'aiuto

ho trovato poco e niente col mio amilo a 1630 per lm-sensors.
come faccio a sapere se il mio hardware è compatibile con lm-sensors????

[PiloZ]

ingpeo ti invitava ad assicurarti che fossero caricati i moduli, posti lsmod e come vedi anche te i moduli non ci sono. Che aspetti a caricarli?
ciao

[ghiotto86]

Originariamente inviato da PiloZ
ingpeo ti invitava ad assicurarti che fossero caricati i moduli, posti lsmod e come vedi anche te i moduli non ci sono. Che aspetti a caricarli?
ciao

ma scusa i moduli che mi aveva detto sono caricati.

o sbaglio??'
fammi vedere

[PiloZ]

Originariamente inviato da ghiotto86
ma scusa i moduli che mi aveva detto sono caricati.

o sbaglio??'
fammi vedere

hai ragione scusa, sto cazzo di Internet Explorer da lavoro fa cagare anche con la funzione ctrl+f

[ghiotto86]

Originariamente inviato da PiloZ
hai ragione scusa, sto cazzo di Internet Explorer da lavoro fa cagare anche con la funzione ctrl+f

quindi ho caricato i moduli che mi ha etto inpgeo??
allora cosa sbalgio???

[PiloZ]

e comunque mancano ancora i moduli per i sensori della tua scheda madre.

[ghiotto86]

Originariamente inviato da PiloZ
e comunque mancano ancora i moduli per i sensori della tua scheda madre.

cio è che devo fa , sto impazzendo

[PiloZ]

Originariamente inviato da ghiotto86
cio è che devo fa , sto impazzendo

eviterei di scrivertelo visto che ti ho già indicato come fare 2 o forse 3 volte
ti invito invece per la seconda volta a rileggerti quello che ti ho detto nei precedenti thread
ciao e non impazzire perchè altrimenti non ottieni niente

[ghiotto86]

Originariamente inviato da PiloZ
eviterei di scrivertelo visto che ti ho già indicato come fare 2 o forse 3 volte
ti invito invece per la seconda volta a rileggerti quello che ti ho detto nei precedenti thread
ciao e non impazzire perchè altrimenti non ottieni niente

si l'ho letto quello che mi hai detto, ma se vedi quando faccio sensors-detect mi da quei failed che forse sono la mia rovina.
alla fine mi dice solo di caricare due moduli (se vedi) e sono i moduli per la RAM che a me non mi frega proprio
quindi????
ti posso di nuovo ripostare sensors-detect se lo vuoi

[PiloZ]

Originariamente inviato da ghiotto86
quindi????

Cerca di capire quali sono gli altri moduli che devi caricare in base alla tua scheda madre.

Originariamente inviato da ghiotto86
ti posso di nuovo ripostare sensors-detect se lo vuoi

Nooooo!!! ti prego...non farloooOOOooo

[ghiotto86]

Originariamente inviato da PiloZ
Cerca di capire quali sono gli altri moduli che devi caricare in base alla tua scheda madre.

Nooooo!!! ti prego...non farloooOOOooo

si ma non li posso sapere se non me li dice sensrs-detect
poi la mia scheda madre non la conosco perchè ho un portatile.

che zzo devo fa??'

[PiloZ]

Originariamente inviato da ghiotto86

si ma non li posso sapere se non me li dice sensrs-detect
poi la mia scheda madre non la conosco perchè ho un portatile.

che zzo devo fa??'

ti ripeto: leggi meglio ciò che ti ho scritto nei precedenti post perchè mi stai dimostrando che non hai letto

[ghiotto86]

Originariamente inviato da PiloZ

ti ripeto: leggi meglio ciò che ti ho scritto nei precedenti post perchè mi stai dimostrando che non hai letto

allora tu mi hai detto questo:



probabile

inizia a dare:
apt-get install lm-sensors FATTO

vedi se tra la lista delle mobo c'è anche la tua: NON SO QUALE SIA
http://mbm.livewiredev.com/ E' SOLO PER WINDOWS
e reperisci i nomi dei sensori altrimenti cerca su google che già troverai qualcosa.

fai riconoscere i sensori con: FATTO
$sensors-detect FATTO

ora dovrai caricare i moduli dei sensori della tua mobo come NON SO QUALI SONO consigliato alla fine del comando $sensors-detect, prova a caricarli e se non sono caricati sul kernel mettili come M e ricompila.
make menuconfig > Device Drivers > I2C support --->
<M> I2C support
<M> I2C device interface
e poi sia in:
I2C Hardware Bus support --->
che in:
Hardware Sensors Chip support --->

dovrai mettere a M i sensori usati dalla tua mobo, prova magari a mettere a tutti M giusto per capire poi quali funzioneranno, altirmenti devo compilare troppe volte.
FATTO


lista le temperature: FATTO
$sensors

io per esempio uso e metto in /etc/modules per caricarli all'avvvio in automatico i seguenti moduli:
#sensori
i2c_sensor
i2c_isa
i2c_core
i2c_viapro
w83781d

COME HAI FATTO A SAPERE CHE ERANO QUESTI MODULI DA CARICARE????
mi sono spiegato male lo so

[PiloZ]

Originariamente inviato da ghiotto86
vedi se tra la lista delle mobo c'è anche la tua: NON SO QUALE SIA
http://mbm.livewiredev.com/ E' SOLO PER WINDOWS
e reperisci i nomi dei sensori altrimenti cerca su google che già troverai qualcosa.

caprone rincitrullito che non sei altro
E' SOLO PER WINDOWS!!! ma cosa ma che stai a dì io ti ho detto per caso di installati mbm ? non mi pare! ti ho detto di prendere solo il nome dei sensori, se non sai che scheda madre hai come posso saperlo io? vedi di scoprirlo no altrimenti ti ho detto non solo io di cercare il modello del tuo notebook su google con lmsensor per cercare di dedurre che minchia di sensori ti servono.
caprone 2 rincitrullito 2 che non sei altro su con la vita e datti da fare altrimenti non impari niente