Problema Connessione Internet

[pancu]

Ho appena installa eciadsl-usermode-0.10.Ho un modem Ericsson hm120dp, la connessione sembra andare a buon fine, ma quando faccio il ping ad un ip non ottengo risposte.
Posto il codice:

[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is OK
Loading UHCI support... Warning: uhci-hcd module doesn't exist

[EciAdsl 2/5] Uploading firmware...

GlobeSpan USB ADSL WAN Modem compatible modem found (in 2094ms)
eciadsl-firmware: success
firmware loaded successfully

[EciAdsl 3/5] Synchronization...
...
eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

nice: `--20' option is obsolete; use `-n -20' since this will be removed in the future
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
rcvd [LCP ConfReq id=0x1 <auth pap> <magic 0x896d3405>]
sent [LCP ConfAck id=0x1 <auth pap> <magic 0x896d3405>]
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
rcvd [LCP ConfAck id=0x1 <magic 0x79747f2>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0x1 user="[email protected]" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.100.1>]
sent [IPCP ConfAck id=0x1 <addr 192.168.100.1>]
rcvd [LCP EchoReq id=0x1 magic=0x896d3405 34 05 00 00]
sent [LCP EchoRep id=0x1 magic=0x79747f2 00 00 00 00]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
sent [IPCP ConfReq id=0x2 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
rcvd [IPCP ConfAck id=0x2 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
local  IP address 82.57.181.142
remote IP address 192.168.100.1
primary   DNS address 80.17.209.204
secondary DNS address 151.99.125.1
Connection successful

[EciAdsl 5/5] Setting up route table...

Waiting for ppp0...
Adding default route... default route to ppp0 already exists

Ho poi esegui route -n e questo è cio che mi viene visualizzato:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.100.1   0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       127.0.0.1       255.0.0.0       UG    0      0        0 lo
0.0.0.0         192.168.100.1   0.0.0.0         UG    0      0        0 ppp0

Che posso fare??
Grazie!

[MacRO]

mi sa che è un problema di sincronizzazione....devi provare tutti i file .bin e se non cambia nulla ti devi creare il tuo file bin

prova a guardare un po questa documentazione
http://eciadsl.flashtux.org/doc.php?lang=en