NUOVA EPOX SOCKET 939 CON CIP NFORCE 3 ULTRA

[billuzzo]

Ciao a tutti girando sul sito della epox quasta mattina o trovato questa succedetta mamma a voi intenditori adesso.. ditemi cosa ne pensate


EP-9NDA3+



caratteristiche della skeda :
Introduction


nForce3 Ultra chipset, ATX size
2.0 GTs HT FSB / DDR 400 / AGP-8X / 8ch audio/ 8 USB2.0
GbE LAN / 4 SATA-RAID / 1394



Specification


CPU Socket:
Support Socket-939 based AMD Athlon-64/ Athlon-64 FX up to 3600+ with 2.0GTs Hyper Transport

System Memory:
Four 184-pin DDR SDRAM DIMM sockets
Support single-sided or double-sided 2.5v DDR-333/400 DIMMs with dual channel architecture in 128/256/512Mb technologies
Support Asynchronous clocking mode between FSB and DIMM
Support up to 4GB system memory

Chipset¡G
nVidia nForce3 Ultra AGPset

Expansion Slots:
Five PCI connectors compliant with PCI v2.2
One 1.5v AGP- 8X/4X connector compliant with AGP v3.0

USB:
Eight USB connectors compliant with USB2.0 from embedded USB controller (4 connectors at rear panel)

P-ATA IDE:
Two IDE ports (up to 4 IDE devices) with UDMA-33, ATA-66/100/133 support from embedded IDE controller

S-ATA RAID:
Two S-ATA ports from nForce3 Ultra with up to 150MBps bandwidth
Two S-ATA ports from Marvell 88SR3020 SATA PHY
RAID 0,1,0+1,JBOD support

LAN:
1Gb Ethernet from onboard Cicada CIS8201 Gigabit Ethernet PHY.

1394a:
Two 1394 ports with up to 400Mbps bandwidth from onboard VIA VT6307 1394 controller

Audio:
Selectable 2, 6 or 8-CH audio from onboard Realtek ALC85x AC¡¦97 v2.3 compliant CODEC.
Support Aux-In, CD-In, S/PDIF-in and S/PDIF-out
Rear panel audio jacks configuration;
For 2-channel mode; stereo Line-out (green), stereo Line-In (blue) and Mic-In (pink)
For 6-channel mode; Front stereo-out(green), Rear stereo-out (blue), Center and Sub-woofer (pink)
For 8-channel mode; stereo Line-In (blue), Mic-In (pink), Front stereo-out(green), Rear stereo-out (black), Center and Sub-woofer (Orange) and Side stereo-out(gray)
Support Front panel audio for Mic-In and stereo Line-out only. (Front panel Line-out electrically shared with rear panel Line-out)
Support Auto Jack Sensing for fool-proof audio device installation
Support SPDIF Coaxial output.
Support SPDIF Optical output

I/O:
Onboard Winbond W83627THF LPC I/O controller
Legacy peripheral interface for PS/2 keyboard & mouse, FDD, Parallel, Two Serial, Game and IrDA (v1.0 compliant), ¡K
Support Hardware Monitoring function such as fan speed monitoring and CPU temperature sensing.
Support Smart FAN Control and Intelligent Fan speed control for chassis Fan

BIOS:
4Mb Flash EEPROM with Award Plug & Play BIOS
Support ACPI S3 (Suspend To RAM) mode in ACPI compliant O/S
Support EZ Boot for fast bootable device selection
Support Magic Health for system hardware status report during system boot-up
Support Cool¡¥n¡¦ Quiet

Special Features:
Support KBPO (Keyboard Power ON) function
Support Wake-On-LAN by PME
Support USB resume in S3
Onboard Post-Port LED display
Support AGP-Master for protection against improper AGP card insertion

PowerBIOS for excellent over clocking features:
Support Asynchronous FSB/DIMM timing mode and 1MHz fine tuning on AGP clock
Support BIOS adjustable CPU clock and voltage, AGP voltage, DIMM frequency and voltage settings.

Powerful utilities for Windows:
USDM (Unified System Diagnostic Manager) for system hardware monitoring
Magic Flash for BIOS update without requiring DOS flash utility and bootable diskette
Magic Screen for personal bootup screen design

Useful software bundle:
Symantec Ghost, Norton Personal Firewall and Trend PC-Cillin for system backup and security

Form Factor:
305mm x 245mm x 40mm, ATX Size

Accessories
User¡¦s manual, IO shield
CD for drivers, utilities and bundle software
Round IDE & FDD cables.
S-ATA data and power cable.
Game + COM Bracket cable.

[Sayan V]

Come si vede dall'immagine, sembra proprio che la epox abbia risparmiato sugli integrati

Tra l'altro, da vecchio possessore di ep-8rda+, continua a fare le mobo sempre con la stessa disposizione dei connettori, scomodissimi
il cavo floppy in basso ... anche i cavi ide ... ed i conettori atx troppo a sx, che passano sopra al dissy cpu ... sembrano stupidaggini eppure ho avuto problemi nel mio case

[billuzzo]

cambia case cmq dai e un bella mammina dall'espetto dalle prestazioni nn ne o la piu pallida idee , ma credo che sicuramente qualcuno la testerà come si deve.