Autenticazione PAP/CHAP

[Bolo]

Sono ad un passo dal fare andare il modem...

Mentre avvio la connessione con kppp mi da questi errori:

The pppd daemon died unexpectedly!
Exit status: 1
The remote system is required to authenticate itself
but I couldn't find any suitable secret (password) for it to use to do so.
(None of the available passwords would let it use an IP address.)

Il modem "suona" quindi quello è a posto....

------------------------

log della connessione:

ATZ
OK
ATM1L1
OK
ATDT0547421010
CONNECT 49333 V42bis

-------------------------

Il file /etc/ppp/chap-secrets è vuoto mentre il file /etc/ppp/pap-secrets è il seguente:

# Every regular user can use PPP and has to use passwords from /etc/passwd
* hostname "" *

# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
# other accounts that should not be able to use pppd!
guest hostname "*" -
master hostname "*" -
root hostname "*" -
support hostname "*" -
stats hostname "*" -

-------------------------------


Cosa devo fare??

[mos]

metti in entrambi i files questa riga:

"TUOUSERNAME" * "TUAPASSWORD"

[Bolo]

Ho inserito quella riga in entrambi i files;

Però ora mi da un altro errore:

pppd 2.4.2 started by root, uid 0
using channel 12
Using interface ppp0
Connect: ppp0 <--> /dev/ttyLT0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth eap> <magic 0x8d862fc7> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth eap> <magic 0x8d862fc7> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xd <asyncmap 0xa0000> <auth pap> <magic 0x33fe6e72> <pcomp> <accomp>]
sent [LCP ConfAck id=0xd <asyncmap 0xa0000> <auth pap> <magic 0x33fe6e72> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth eap> <magic 0x8d862fc7> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth eap> <magic 0x8d862fc7> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xe <asyncmap 0xa0000> <auth pap> <magic 0x33fe7e20> <pcomp> <accomp>]
sent [LCP ConfAck id=0xe <asyncmap 0xa0000> <auth pap> <magic 0x33fe7e20> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0xa0000> <auth eap> <magic 0x8d862fc7> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x8d862fc7]
sent [EAP Request id=0x81 Identity <Message "Name">]
sent [PAP AuthReq id=0x1 user="[email protected]" password=<hidden>]
rcvd [LCP EchoRep id=0x0 magic=0x33fe7e20]
rcvd [EAP Response id=0x81 Identity <Name "BOLOGNA-MPP">]
EAP: unauthenticated peer name "BOLOGNA-MPP"
sent [EAP Request id=0x82 MD5-Challenge <Value 7d 58 03 08 a0 f0 a3 31 e0 38 58 97 1b 98 ed 64 26 01 f9 2c b9> <Name "debian">]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
rcvd [LCP TermReq id=0xf]
LCP terminated by peer
sent [LCP TermAck id=0xf]
Hangup (SIGHUP)
Modem hangup
Connection terminated.
Exit.

[Bolo]

Non so se serve saperlo, comunque sto usando debian...

[ANDY CAPS]

edita il file /etc/ppp/options

ad un certo punto trovi una riga con scritto

auth

la devi commentare cosi

#auth

dovrebbe andare